Extremely Long-Lived Charge Donor States Formed by Visible Irradiation of Quantum Dots.

Using cyclic voltammetry under illumination, we recently demonstrated that CdS quantum dots (QDs) form charge donor states that live for at least several minutes after illumination ends, ∼12 orders of magnitude longer than expected for free carriers. This time scale suggests that the conventionally accepted mechanism of charge transfer, wherein charges directly transfer to an acceptor following exciton dissociation, cannot be complete. Because of these long time scales, this unconventional pathway is not readily observed using time-resolved spectroscopy to probe charge transfer dynamics. Here, we investigated the chemical nature of these charge donor states using cyclic voltammetry under illumination coupled with NMR spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and optical spectroscopy. Our data reveal that charges are stored locally rather than as free carriers, and the number of charges stored is dependent on the QD surface ligation and stoichiometry. Altogether, our results confirm that electrons are stored at ligated surface Cd, these sites are competent charge donors, and this storage is charge balanced by X-type ligand desorption. We found that charge storage occurs in every QD system studied, including CdS, CdSe, and InP capped with carboxylate and phosphonate ligands.

Colossal Core/Shell CdSe/CdS Quantum Dot Emitters.

Single-photon sources are essential for advancing quantum technologies with scalable integration being a crucial requirement. To date, deterministic positioning of single-photon sources in large-scale photonic structures remains a challenge. In this context, colloidal quantum dots (QDs), particularly core/shell configurations, are attractive due to their solution processability. However, traditional QDs are typically small, about 3 to 6 nm, which restricts their deterministic placement and utility in large-scale photonic devices, particularly within optical cavities. The largest existing core/shell QDs are a family of giant CdSe/CdS QDs, with total diameters ranging from about 20 to 50 nm. Pushing beyond this size limit, we introduce a synthesis strategy for colossal CdSe/CdS QDs, with sizes ranging from 30 to 100 nm, using a stepwise high-temperature continuous injection method. Electron microscopy reveals a consistent hexagonal diamond morphology composed of 12 semipolar {101̅1} facets and one polar (0001) facet. We also identify conditions where shell growth is disrupted, leading to defects, islands, and mechanical instability, which suggest synthetic requirements for growing crystalline particles beyond 100 nm. The stepwise growth of thick CdS shells on CdSe cores enables the synthesis of emissive QDs with long photoluminescence lifetimes of a few microseconds and suppressed blinking at room temperature. Notably, QDs with 80 and 100 CdS monolayers exhibit high single-photon emission purity with second-order photon correlation g(2)(0) values below 0.2.

Ni2P active site ensembles tune electrocatalytic nitrate reduction selectivity.

We demonstrate that active site ensembles on transition metal phosphides tune the selectivity of the nitrate reduction reaction. Using Ni2P nanocrystals as a case study, we report a mechanism involving competitive co-adsorption of H* and NOx* intermediates. A near 100% faradaic efficiency for nitrate reduction over hydrogen evolution is observed at -0.4 V, while NH3 selectivity is maximized at -0.2 V vs. RHE.

Synthesis and Single Crystal X-ray Diffraction Structure of an Indium Arsenide Nanocluster.

The discovery of magic-sized clusters as intermediates in the synthesis of colloidal quantum dots has allowed for insight into formation pathways and provided atomically precise molecular platforms for studying the structure and surface chemistry of those materials. The synthesis of monodisperse InAs quantum dots has been developed through the use of indium carboxylate and As(SiMe3)3 as precursors and documented to proceed through the formation of magic-sized intermediates. Herein, we report the synthesis, isolation, and single-crystal X-ray diffraction structure of an InAs nanocluster that is ubiquitous across reports of InAs quantum dot synthesis. The structure, In26As18(O2CR)24(PR'3)3, differs substantially from previously reported semiconductor nanocluster structures even within the III-V family. However, it can be structurally linked to III-V and II-VI cluster structures through the anion sublattice. Further analysis using variable temperature absorbance spectroscopy and support from computation deepen our understanding of the reported structure and InAs nanomaterials as a whole.

Ligand Steric Profile Tunes the Reactivity of Indium Phosphide Clusters.

Indium phosphide quantum dots have become an industrially relevant material for solid-state lighting and wide color gamut displays. The synthesis of indium phosphide quantum dots from indium carboxylates and tris(trimethylsilyl)phosphine (P(SiMe3)3) is understood to proceed through the formation of magic-sized clusters, with In37P20(O2CR)51 being the key isolable intermediate. The reactivity of the In37P20(O2CR)51 cluster is a vital parameter in controlling the conversion to quantum dots. Herein, we report structural perturbations of In37P20(O2CR)51 clusters induced by tuning the steric properties of a series of substituted phenylacetate ligands. This approach allows for control over reactivity with P(SiMe3)3, where meta-substituents enhance the susceptibility to ligand displacement, and para-substituents hinder phosphine diffusion to the core. Thermolysis studies show that with complete cluster dissolution, steric profile can modulate the nucleation period, resulting in a nanocrystal size dependence on ligand steric profile. The enhanced stability from ligand engineering also allows for the isolation and structural characterization by single-crystal X-ray diffraction of a new III-V magic-sized cluster with the formula In26P13(O2CR)39. This intermediate precedes the In37P20(O2CR)51 cluster on the InP QD reaction coordinate. The physical and electronic structure of this cluster are analyzed, providing new insight into previously unrecognized relationships between II-VI and III-V materials and the discrete growth of III-V cluster intermediates.

Navigating the Potential Energy Surface of CdSe Magic-Sized Clusters: Synthesis and Interconversion of Atomically Precise Nanocrystal Polymorphs.

Magic-sized clusters (MSCs) are kinetically stable, atomically precise intermediates along the quantum dot (QD) reaction potential energy surface. Literature precedent establishes two classes of cadmium selenide MSCs with QD-like inorganic cores: one class is proposed to be cation-rich with a zincblende crystal structure, while the other is proposed to be stoichiometric with a "wurtzite-like" core. However, the wide range of synthetic protocols used to access MSCs has made direct comparisons of their structure and surface chemistry difficult. Furthermore, the physical and chemical relationships between MSC polymorphs are yet to be established. Here, we demonstrate that both cation-rich and stoichiometric CdSe MSCs can be synthesized from identical reagents and can be interconverted through the addition of either excess cadmium or selenium precursor. The structural and compositional differences between these two polymorphs are contrasted using a combination of 1H NMR spectroscopy, X-ray diffraction (XRD), pair distribution function (PDF) analysis, inductively coupled plasma optical emission spectroscopy, and UV-vis transient absorption spectroscopy. The subsequent polymorph interconversion reactions are monitored by UV-vis absorption spectroscopy, with evidence for an altered cluster atomic structure observed by powder XRD and PDF analysis. This work helps to simplify the complex picture of the CdSe nanocrystal landscape and provides a method to explore structure-property relationships in colloidal semiconductors through atomically precise synthesis.

Enhanced Charge Transfer from Coinage Metal Doped InP Quantum Dots.

This paper describes coinage-metal-doped InP quantum dots (QDs) as a platform for enhanced electron transfer to molecular acceptors relative to undoped QDs. A synthetic strategy is developed to prepare doped InP/ZnSe QDs. First-principles DFT calculations show that Ag+ and Cu+ dopants localize photoexcited holes while leaving electrons delocalized. This charge carrier wave function modulation is leveraged to enhance electron transfer to molecular acceptors by up to an order of magnitude. Examination of photoluminescence quenching data suggests that larger electron acceptors, such as anthraquinone and methyl viologen, bind to the QD surface in two ways: by direct adsorption to the surface and by adsorption following displacement of a weakly bound surface cation-ligand complex. Reactions with larger acceptors show the greatest increases in electron transfer between doped and undoped quantum dots, while smaller acceptors show smaller enhancements. Specifically, benzoquinone shows the smallest, followed by naphthoquinone and then methyl viologen and anthraquinone. These results demonstrate the benefits of dopant-induced excited-state carrier localization on photoinduced charge transfer and highlight design principles for improved implementation of quantum dots in photoredox catalysis.

Design Rules for Obtaining Narrow Luminescence from Semiconductors Made in Solution.

Solution-processed semiconductors are in demand for present and next-generation optoelectronic technologies ranging from displays to quantum light sources because of their scalability and ease of integration into devices with diverse form factors. One of the central requirements for semiconductors used in these applications is a narrow photoluminescence (PL) line width. Narrow emission line widths are needed to ensure both color and single-photon purity, raising the question of what design rules are needed to obtain narrow emission from semiconductors made in solution. In this review, we first examine the requirements for colloidal emitters for a variety of applications including light-emitting diodes, photodetectors, lasers, and quantum information science. Next, we will delve into the sources of spectral broadening, including "homogeneous" broadening from dynamical broadening mechanisms in single-particle spectra, heterogeneous broadening from static structural differences in ensemble spectra, and spectral diffusion. Then, we compare the current state of the art in terms of emission line width for a variety of colloidal materials including II-VI quantum dots (QDs) and nanoplatelets, III-V QDs, alloyed QDs, metal-halide perovskites including nanocrystals and 2D structures, doped nanocrystals, and, finally, as a point of comparison, organic molecules. We end with some conclusions and connections, including an outline of promising paths forward.

Effect of a redox-mediating ligand shell on photocatalysis by CdS quantum dots.

Semiconductor quantum dots (QDs) are efficient organic photoredox catalysts due to their high extinction coefficients and easily tunable band edge potentials. Despite the majority of the surface being covered by ligands, our understanding of the effect of the ligand shell on organic photocatalysis is limited to steric effects. We hypothesize that we can increase the activity of QD photocatalysts by designing a ligand shell with targeted electronic properties, namely, redox-mediating ligands. Herein, we functionalize our QDs with hole-mediating ferrocene (Fc) derivative ligands and perform a reaction where the slow step is hole transfer from QD to substrate. Surprisingly, we find that a hole-shuttling Fc inhibits catalysis, but confers much greater stability to the catalyst by preventing a build-up of destructive holes. We also find that dynamically bound Fc ligands can promote catalysis by surface exchange and creation of a more permeable ligand shell. Finally, we find that trapping the electron on a ligand dramatically increases the rate of reaction. These results have major implications for understanding the rate-limiting processes for charge transfer from QDs and the role of the ligand shell in modulating it.

Colloidal, Room-Temperature Growth of Metal Oxide Shells on InP Quantum Dots.

We demonstrate colloidal, layer-by-layer growth of metal oxide shells on InP quantum dots (QDs) at room temperature. We show with computational modeling that native InP QD surface oxides give rise to nonradiative pathways due to the presence of surface-localized dark states near the band edges. Replacing surface indium with zinc to form a ZnO shell results in reduced nonradiative decay and a density of states at the valence band edge that resembles defect-free, stoichiometric InP. We then developed a synthetic strategy using stoichiometric amounts of common atomic layer deposition precursors in alternating cycles to achieve layer-by-layer growth. Metal-oxide-shelled InP QDs show bulk and local structural perturbations as determined by X-ray diffraction and extended X-ray absorption fine structure spectroscopy. Upon growing ZnSe shells of varying thickness on the oxide-shelled QDs, we observe increased photoluminescence (PL) quantum yields and narrowing of the emission linewidths that we attribute to decreased ion diffusion to the shell, as supported by phosphorus X-ray emission spectroscopy. These results present a versatile strategy to control QD interfaces for novel heterostructure design by leveraging surface oxides. This work also contributes to our understanding of the connections between structural complexity and PL properties in technologically relevant colloidal optoelectronic materials.

Deposition of Ultrathin MgB2 Films from a Suspension Using Cosolvent Marangoni Flow.

Magnesium diboride (MgB2) has demonstrated, theoretically and experimentally, promise as a candidate material for hydrogen storage and has thus attracted much contemporary research interest. To study hydrogen gas adsorption on MgB2 thin films using a quartz crystal microbalance (QCM)─a workhorse apparatus for this specific experiment─MgB2 must be deposited uniformly on the active surface of the QCM without damaging the quartz's performance. In work presented here, a wet-chemistry colloid synthesis and deposition process of a MgB2 thin film on a gold (Au) surface was established to avoid the extreme conditions of conventional physical deposition methods. This process also counteracts the unwanted phenomena of drying droplets on a solid surface, particularly the coffee-ring effect. To verify the normal function of the QCM after MgB2 deposition and its ability to obtain meaningful data, simple gas adsorption tests were conducted on the QCM, and the MgB2 film on the QCM was characterized with X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) for elemental analysis and surface roughness, respectively. To obtain information about the thickness and the involvement of the coffee-ring effect, the same synthesis route was applied on a similar gold substrate─an evaporated Au film on glass. XPS characterization of the film and its precursor suspension shows the potential existence of both MgB2 and its oxide forms. The film's thickness on evaporated Au was measured by scanning transmission electron microscopy (STEM) to be 3.9 nm. The resulting samples show mitigation of the coffee-ring effect through roughness measurements with AFM at two scan sizes of 50 × 50 and 1 × 1 µm2.

Deterministic Quantum Light Arrays from Giant Silica-Shelled Quantum Dots.

Colloidal quantum dots (QDs) are promising candidates for single-photon sources with applications in photonic quantum information technologies. Developing practical photonic quantum devices with colloidal materials, however, requires scalable deterministic placement of stable single QD emitters. In this work, we describe a method to exploit QD size to facilitate deterministic positioning of single QDs into large arrays while maintaining their photostability and single-photon emission properties. CdSe/CdS core/shell QDs were encapsulated in silica to both increase their physical size without perturbing their quantum-confined emission and enhance their photostability. These giant QDs were then precisely positioned into ordered arrays using template-assisted self-assembly with a 75% yield for single QDs. We show that the QDs before and after assembly exhibit antibunching behavior at room temperature and their optical properties are retained after an extended period of time. Together, this bottom-up synthetic approach via silica shelling and the robust template-assisted self-assembly offer a unique strategy to produce scalable quantum photonics platforms using colloidal QDs as single-photon emitters.

Photoinduced Charge Transfer from Quantum Dots Measured by Cyclic Voltammetry.

Measuring and modulating charge-transfer processes at quantum dot interfaces are crucial steps in developing quantum dots as photocatalysts. In this work, cyclic voltammetry under illumination is demonstrated to measure the rate of photoinduced charge transfer from CdS quantum dots by directly probing the changing oxidation states of a library of molecular charge acceptors, including both hole and electron acceptors. The voltammetry data demonstrate the presence of long-lived charge donor states generated by native photodoping of the quantum dots as well as a positive correlation between driving force and rate of charge transfer. Changes to the voltammograms under illumination follow mechanistic predictions from the ErCi' zone diagram, and electrochemical modeling allows for measurement of the rate of productive electron transfer. Observed rates for photoinduced charge transfer are on the order of 0.1 s-1, which are distinct from the picosecond dynamics measured by conventional transient optical spectroscopy methods and are more closely connected to the quantum yield of light-mediated chemical transformations.

Impact of Nanoparticle Size and Surface Chemistry on Peptoid Self-Assembly.

Self-assembled organic nanomaterials can be generated by bottom-up assembly pathways where the structure is controlled by the organic sequence and altered using pH, temperature, and solvation. In contrast, self-assembled structures based on inorganic nanoparticles typically rely on physical packing and drying effects to achieve uniform superlattices. By combining these two chemistries to access inorganic-organic nanostructures, we aim to understand the key factors that govern the assembly pathway and structural outcomes in hybrid systems. In this work, we outline two assembly regimes between quantum dots (QDs) and reversibly binding peptoids. These regimes can be accessed by changing the solubility and size of the hybrid (peptoid-QD) monomer unit. The hybrid monomers are prepared via ligand exchange and assembled, and the resulting assemblies are studied using ex-situ transmission electron microscopy as a function of assembly time. In aqueous conditions, QDs were found to stabilize certain morphologies of peptoid intermediates and generate a final product consisting of multilayers of small peptoid sheets linked by QDs. The QDs were also seen to facilitate or inhibit assembly in organic solvents based on the relative hydrophobicity of the surface ligands, which ultimately dictated the solubility of the hybrid monomer unit. Increasing the size of the QDs led to large hybrid sheets with regions of highly ordered square-packed QDs. A second, smaller QD species can also be integrated to create binary hybrid lattices. These results create a set of design principles for controlling the structure and structural evolution of hybrid peptoid-QD assemblies and contribute to the predictive synthesis of complex hybrid matter.

Organic building blocks at inorganic nanomaterial interfaces.

This tutorial review presents our perspective on designing organic molecules for the functionalization of inorganic nanomaterial surfaces, through the model of an "anchor-functionality" paradigm. This "anchor-functionality" paradigm is a streamlined design strategy developed from a comprehensive range of materials (e.g., lead halide perovskites, II-VI semiconductors, III-V semiconductors, metal oxides, diamonds, carbon dots, silicon, etc.) and applications (e.g., light-emitting diodes, photovoltaics, lasers, photonic cavities, photocatalysis, fluorescence imaging, photo dynamic therapy, drug delivery, etc.). The structure of this organic interface modifier comprises two key components: anchor groups binding to inorganic surfaces and functional groups that optimize their performance in specific applications. To help readers better understand and utilize this approach, the roles of different anchor groups and different functional groups are discussed and explained through their interactions with inorganic materials and external environments.

Direct intercalation of MoS2 and WS2 thin films by vacuum filtration.

In the development of next-generation electronics and energy devices, intercalation compounds of transition metal dichalcogenides (TMDCs) are gaining attention for their unique properties that result from synergistic interactions between guest species and host materials. Nowadays, intercalation compounds of MoS2 and WS2 are commonly prepared by a two-step process: (1) exfoliation to form single-layer and/or few-layer nanosheets and (2) restacking the nanosheets with the guest species by vigorously mixing the exfoliated suspension with the solution of guest species. While a wide variety of intercalation compounds have been synthesized using this approach, the intercalation process is often time-consuming, and the product slurry limits material quality and impedes characterization and applications. Herein, we report a versatile method for preparing intercalated TMDCs in a thin-film morphology. Using this approach, we successfully prepared a range of existing intercalation compounds of MoS2 and WS2 (e.g., ferrocene and amine intercalated MoS2 and WS2). Additionally, by leveraging the versatility of this intercalation method, we intercalated phenazine and benzoquinone into MoS2 and WS2 for the first time.

Tuning the interfacial stoichiometry of InP core and InP/ZnSe core/shell quantum dots.

We demonstrate fine-tuning of the atomic composition of InP/ZnSe quantum dots (QDs) at the core/shell interface. Specifically, we control the stoichiometry of both anions (P, As, S, and Se) and cations (In and Zn) at the InP/ZnSe core/shell interface and correlate these changes with the resultant steady-state and time-resolved optical properties of the nanocrystals. The use of reactive trimethylsilyl reagents results in surface-limited reactions that shift the nanocrystal stoichiometry to anion-rich and improve epitaxial growth of the shell layer. In general, anion deposition on the InP QD surface results in a redshift in the absorption, quenching of the excitonic photoluminescence, and a relative increase in the intensity of broad trap-based photoluminescence, consistent with delocalization of the exciton wavefunction and relaxation of exciton confinement. Time-resolved photoluminescence data for the resulting InP/ZnSe QDs show an overall small change in the decay dynamics on the ns timescale, suggesting that the relatively low photoluminescence quantum yields may be attributed to the creation of new thermally activated charge trap states and likely a dark population that is inseparable from the emissive QDs. Cluster-model density functional theory calculations show that the presence of core/shell interface anions gives rise to electronic defects contributing to the redshift in the absorption. These results highlight a general strategy to atomistically tune the interfacial stoichiometry of InP QDs using surface-limited reaction chemistry allowing for precise correlations with the electronic structure and photophysical properties.

CO2 Hydrogenation Catalyzed by a Ruthenium Protic N-Heterocyclic Carbene Complex.

We describe the hydrogenation of CO2 to formate catalyzed by a Ru(II) bis(protic N-heterocyclic carbene, p-NHC) phosphine complex [Ru(bpy)(MeCN)(PPh(p-NHC)2)](PF6)2 (1). Under catalytic conditions (20 µmol catalyst, 20 bar CO2, 60 bar H2, 5 mL THF, 140 °C, 16 h), the activity of 1 is limited only by the amount of K3PO4 present in the reaction, yielding a nearly 1:1 ratio of turnover number (TON) to equivalents of K3PO4 (relative to 1), with the highest TON = 8040. Additionally, analysis of the reaction solution post-run reveals the catalyst intact with no free ligand observed. Stoichiometric studies, including examination of unique carbamate and hydride complexes as relevant intermediates, were carried out to probe the operative mechanism and understand the importance of metal-ligand cooperativity in this system.