Synthesis of 1,3-disubstituted bicyclo[1.1.1]pentanes by cross-coupling induced by transition metals - formation of C-C bonds.

The synthesis of 1,3-disubstituted bicyclo[1.1.1]pentanes (BCPs), by forming a C-C bond, can be achieved by cross-coupling reactions using transition metal catalysts. Two main strategies are described to access these 1,3-disubstituted BCPs, either from nucleophilic BCPs or electrophilic BCPs. Mechanisms are included where relevant.

Valve turning towards on-cycle in cobalt-catalyzed Negishi-type cross-coupling.

Ligands and additives are often utilized to stabilize low-valent catalytic metal species experimentally, while their role in suppressing metal deposition has been less studied. Herein, an on-cycle mechanism is reported for CoCl2bpy2 catalyzed Negishi-type cross-coupling. A full catalytic cycle of this kind of reaction was elucidated by multiple spectroscopic studies. The solvent and ligand were found to be essential for the generation of catalytic active Co(I) species, among which acetonitrile and bipyridine ligand are resistant to the disproportionation events of Co(I). Investigations, based on Quick-X-Ray Absorption Fine Structure (Q-XAFS) spectroscopy, Electron Paramagnetic Resonance (EPR), IR allied with DFT calculations, allow comprehensive mechanistic insights that establish the structural information of the catalytic active cobalt species along with the whole catalytic Co(I)/Co(III) cycle. Moreover, the acetonitrile and bipyridine system can be further extended to the acylation, allylation, and benzylation of aryl zinc reagents, which present a broad substrate scope with a catalytic amount of Co salt. Overall, this work provides a basic mechanistic perspective for designing cobalt-catalyzed cross-coupling reactions.

Synthesis of Five-Membered exo-Glycals from Six-Membered 2-Iodo-endo-glycals.

Five-membered exo-glycals were synthesized from six-membered 2-iodo-endo-glycals by a metal/halogen exchange/ring-opening sequence followed by a cyclization catalyzed by Ag2CO3.

Synthesis of trifluoromethyl N,N-aminals from nitrogen containing heterocycles by using a plasma flow microreactor.

Trifluoromethyl N,N-aminals are important precursors allowing access to fluorinated building blocks. In this work, the direct synthesis of trifluoromethyl N,N-aminals from nitrogen containing heterocycles is reported using argon plasma in a continuous flow microreactor without any additives or metal catalysts. Their transformation to N-trifluoroethyl amines is also reported.

Incorporation of a cyclobutyl substituent in molecules by transition metal-catalyzed cross-coupling reactions.

In this review, the incorporation of a cyclobutyl substituent in molecules, by transition metal-catalyzed cross-coupling, is described by only considering the formation of C-C bonds. Three main strategies are used to introduce a cyclobutyl substituent in molecules by involving either electrophilic or nucleophilic cyclobutane derivatives.

Cascade Cope/Winstein Rearrangements: Synthesis of Azido-Cycloheptadienes from Dialkenylcyclopropanes Possessing a Vinyl Azide.

cis-1,2-Dialkenylcyclopropanes incorporating a vinyl azide, generated by Knoevenagel condensations between the corresponding cyclopropanecarbaldehydes and α-azido ketones, undergo cascade Cope and Winstein [3,3]-sigmatropic rearrangements, under mild conditions. The sequence allows access to diversely substituted 1,4-cycloheptadienes armed with a secondary allylic azide with up to three stereocenters.

Plasma flow chemistry for direct N-acylation of amines by esters.

The direct N-acylation of amines by esters in a microreactor is described using argon plasma, thereby producing amides in good to excellent yields.

Ni-Catalyzed Cross-Coupling of 2-Iodoglycals and 2-Iodoribals with Grignard Reagents: A Route to 2-C-Glycosides and 2'-C-Nucleosides.

The synthesis of 2-C-glycals and 2-C-ribals was achieved in good yields using a nickel-catalyzed cross-coupling between 2-iodoglycals and 2-iodoribal respectively and Grignard reagents. The prepared 2-C-glycals and ribals were then transformed into 2-C-2-deoxyglycosides, 2-C-diglycosides and 2'-C-2'-deoxynucleosides. The developed method was applied to the synthesis of a 2-chloroadenine 2'-deoxyribonucleoside - a structural analogue of cladribine (Mavenclad®, Leustatin®) and clofarabine (Clolar®, Evoltra®), two compounds used in the treatment of relapsing-remitting multiple sclerosis and hairy cell leukemia.

Synthesis of Azocanes from Piperidines via an Azetidinium Intermediate.

α-Trifluoromethyl azocanes are accessible from 2-(trifluoropropan-2-ol) piperidines by metal-free ring-expansion involving a bicyclic azetidinium intermediate. The opening of the azetidinium intermediate was achieved by various nucleophiles (amines, alcoholates, carboxylates, phosphonates, halides and pseudo-halides) with an excellent regio- diastereo- and enantioselectivity and in good yields. The relative configuration of the piperidines and azocanes were assigned and the deprotected azocanes offer opportunities for further derivatization.

Radical Addition of SF5Cl to Cyclopropenes: Synthesis of (Pentafluorosulfanyl)cyclopropanes.

With the goal of accessing yet unknown SF5-cyclopropyl building blocks, the radical addition of SF5Cl to cyclopropenes was investigated. Addition of the SF5 radical occurs regioselectively at the less substituted carbon of cyclopropenes and trans to the most hindered substituent at C3, while chlorine atom transfer proceeds with moderate to high levels of diastereocontrol. The carbon-chlorine bond in the resulting adducts can undergo subsequent radical reduction or be involved in a radical cyclization.

Enantioselective Cross-couplings between Halide Derivatives and Organometallics by Using Iron and Cobalt Catalysts: Formation of C-C Bonds.

This review highlights the recent achievements of iron- and cobalt-catalyzed enantioselective cross-couplings of halide derivatives with organometallic reagents for the construction of C-C bonds. Synthetic applications of enantioselective cross-couplings to natural products and biologically active compounds are also covered showing the power of these cross-couplings in organic synthesis.

Palladium-Catalyzed Regioselective Allylic Oxidation of Amorphadiene, a Precursor of Artemisinin.

A regioselective Pd-catalyzed allylic oxidation of amorphadiene, a key precursor to the antimalarial drug artemisinin, is described. Amorphadiene can be obtained in high yields by fermentation, but it is currently treated as a waste in the industrial semisynthetic artemisinin process. The catalytic step described here is a substitute for the P450 enzymes involved in the artemisinin biosynthesis and opens up new opportunities to supplement a critical step in the current semisynthetic route and increase the potential of the fermentation process.

Photochemical Hydrothiolation of Amorphadiene and Formal Synthesis of Artemisinin via a Pummerer Rearrangement.

A new access to artemisinin is reported based on a selective photochemical hydrothiolation of amorphadiene, a waste product of the industrial semisynthetic route. This study highlights the discovery of two distinctive activation pathways under solvent-free conditions or using a photocatalyst promoting H-abstraction. Subsequently, a chemoselective oxidation of the resulting photochemically generated thioether, followed by a Pummerer rearrangement, affords dihydroartemisinic aldehyde, a key intermediate in the synthesis of artemisinin.

Cobalt-Catalyzed 1,4-Aryl Migration/Desulfonylation Cascade: Synthesis of α-Aryl Amides.

A cobalt-catalyzed 1,4-aryl migration/disulfonylation cascade applied to α-bromo N-sulfonyl amides was developed. The reaction was highly chemoselective, allowing the preparation of α-aryl amides possessing a variety of functional groups. The method was used as the key step to synthesize an alkaloid, (±)-deoxyeseroline. Mechanistic investigations suggest a radical process.

Asymmetric desymmetrization of alkene-, alkyne- and allene-tethered cyclohexadienones using transition metal catalysis.

This review is covering the recent development of catalytic asymmetric domino reactions for the desymmetrization of alkene-, alkyne- and allene-tethered cyclohexadienones using transition metals and chiral ligands. This desymmetrization has emerged as an important strategy for the rapid construction of complex molecular skeletons, such as fused-polycycles or spirocyclic compounds in controlling multiple stereogenic centers.

Ring-opening of azetidiniums by nucleophiles. Synthesis of polysubstituted linear amines.

This microreview focuses on the nucleophilic ring-opening of azetidiniums presenting various substitution patterns at C2, C3, and C4. In most cases, the nucleophilic ring-opening occurred in a stereoselective and regioselective fashion producing functionalized linear amines. Experimental selectivities associated with Density Functional Theory (DFT) calculations have allowed a better understanding of the parameters governing the regioselectivities.

Copper-Catalyzed Cross-Coupling between Alkyl (Pseudo)halides and Bicyclopentyl Grignard Reagents.

The development of a copper-catalyzed cross-coupling between primary and secondary (pseudo)halides and bicyclopentyl Grignard reagents is reported. Highly strained bicyclopentanes can be cross-coupled with a large panel of primary alkyl mesylates and secondary alkyl iodides. The catalytic system is simple and cheap, and the reaction is general and chemoselective.

Chemo- and Diastereoselective Hydrosilylation of Amorphadiene toward the Synthesis of Artemisinin.

A formal synthesis of artemisinin starting from amorphadiene is described. This new route relies on the development of a catalytic chemo- and diastereoselective hydrosilylation. The practicability of this method is demonstrated by converting amorphadiene to dihydroartemisinic aldehyde using a one-pot hydrosilylation/oxidation sequence, minimizing the number of purifications and maximizing the productivity through a practical one-pot procedure. In addition, this approach can be coupled with a crystallization-induced diastereoselective transformation (CIDT) to enhance the optical purity of the key target intermediate, dihydroartemisinic aldehyde.

Asymmetric Transfer Hydrogenation of gem-Difluorocyclopropenyl Esters: Access to Enantioenriched gem-Difluorocyclopropanes.

Catalytic enantioselective access to disubstituted functionalized gem-difluorocyclopropanes, which are emerging fluorinated motifs of interest in medicinal chemistry, was achieved through asymmetric transfer hydrogenation of gem-difluorocyclopropenyl esters, catalyzed by a Noyori-Ikariya (p-cymene)-ruthenium(II) complex, with (N-tosyl-1,2-diphenylethylenediamine) as the chiral ligand and isopropanol as the hydrogen donor. The resulting cis-gem-difluorocyclopropyl esters were obtained with moderate to high enantioselectivity (ee=66-99 %), and post-functionalization reactions enable access to valuable building blocks incorporating a cis- or trans-gem-difluorocyclopropyl motif.

Cobalt-Catalyzed Cross-Couplings between Alkyl Halides and Grignard Reagents.

Metal-catalyzed cross-couplings have emerged as essential tools for the construction of C-C bonds. The identification of efficient catalytic systems as well as large substrate scope made these cross-couplings key reactions to access valuable molecules ranging from materials, agrochemicals to active pharmaceutical ingredients. They have been increasingly integrated in retrosynthetic plans, allowing shorter and original route development. Palladium-catalyzed cross-couplings still largely rule the field, with the most popular reactions in industrial processes being the Suzuki and Sonogashira couplings. However, the extensive use of palladium complexes raises several problems such as limited resources, high cost, environmental impact, and frequent need for sophisticated ligands. As a consequence, the use of nonprecious and cheap metal catalysts has appeared as a new horizon in cross-coupling development. Over the last three decades, a growing interest has thus been devoted to Fe-, Co-, Cu-, or Ni-catalyzed cross-couplings. Their natural abundance makes them cost-effective, allowing the conception of more sustainable and less expensive chemical processes, especially for large-scale production of active molecules. In addition to these economical and environmental considerations, the 3d metal catalysts also exhibit complementary reactivity with palladium complexes, facilitating the use of alkyl halide partners due to the decrease of ß-elimination side reactions. In particular, by using cobalt catalysts, numerous cross-couplings between alkyl halides and organometallics have been described. However, cobalt catalysis still stays far behind palladium catalysis in terms of popularity and applications, and the expansion of the substrate scope as well as the development of simple and robust catalytic systems remains an important challenge.In 2012, our group entered the cobalt catalysis field by developing a cobalt-catalyzed cross-coupling between C-bromo glycosides and Grignard reagents. The generality of the coupling allowed the preparation of a range of valuable C-aryl and C-vinyl glycoside building blocks. We then focused on the functionalization of saturated N-heterocycles, and a variety of halo-azetidines, -pyrrolidines, and -piperidines were successfully reacted with aryl and alkenyl Grignard reagents under cobalt catalysis. With the objective of preparing valuable α-aryl amides, a cobalt-catalyzed cross-coupling applied to α-bromo amides was studied and then extended to α-bromo lactams. Recently, we also reported an efficient and general cross-coupling involving cyclopropyl- and cyclobutyl-magnesium bromides. This method allows the alkylation of functionalized small strained rings by a range of primary and secondary alkyl halides.