Effect of Mandible Phantom Inclination in the Axial Plane on Image Quality in the Presence of Implant Using Cone-Beam Computer Tomography.

Purpose To assess the effect of 30° phantom inclination on image quality in the presence of an implant using cone-beam computed tomography (CBCT). Materials and methods Three series of eight scans were taken and categorized by a range of 87-90 kVp and 7.1 mA, and 8 mA. For the first CBCT series, the phantom was placed on a flat plane. For the second series, the phantom was inclined at 30° in the axial plane. For the third series, inclined scans were re-oriented and included for statistics. In total, 24 scans were used for statistics. i.e., eight scans at three different planes (flat plane, inclined plane, and re-oriented inclined plane). All the images were analyzed for artifact and contrast-to-noise ratio (CNR) on ImageJ software. Results The inclination of the dry human mandible phantom by 30° reduces the artifact (p <0.05). However, the CNR was not affected by the phantom inclination. Conclusion The appropriate inclination of the head can significantly reduce the metal artifact in the presence of implants and thus improve the CBCT image quality for post-operative follow-up.

Novel modified quantitative index for cone-beam CT assessment of medication-related osteonecrosis of the jaw - comparative analysis with original index.

Purpose: The main research goal was to address the critical need for an objective and quantitative index to describe the nature and extent of radiographic features of medication-related osteonecrosis of the jaw (MRONJ) lesions and complement the descriptive radiographic interpretation of the lesion and its clinical assessment. Method and Materials: A retrospective review of MRONJ patients assessed at our institution was performed to compare the Composite Radiographic Index (CRI), identified from a prior scoping review, with a proposed modification, the Modified CRI index ('Mod-CRI'). The Mod-CRI index was weighted to assign a higher score for diffuse radiographic involvement of a given lesion, and delineated MRONJ lesions into those with 'high' and 'low' severity. Twenty-two MRONJ cases imaged with CBCT were retrospectively assessed with both CRI and Mod-CRI indices and the two indices were compared for their ability to quantitatively describe cone-beam computerized tomography (CBCT) radiographic features and complement the clinical staging of the MRONJ lesion. Results: There was a statistically significant association between increased clinical stage and higher mod-CRI score (p = 0.040). The Mod-CRI index sorted the patients who scored intermediate scores with the CRI (n = 15) into either the low (n = 8) or high categories (n = 7). Conclusion: The Mod-CRI index eliminated the ambiguous intermediate-category-scores in the previously published CRI index and provided greater clarity to the interpretation of a given index score. Adopting the Mod-CRI could improve MRONJ assessment and enhance communication between the radiologist and the clinician.

Cone Beam Computed Tomography (CBCT) Evaluation of Alveolar Bone Thickness and Root Angulation in Anterior Maxilla for Planning Immediate Implant Placement.

OBJECTIVE:  This retrospective study aimed to measure the labial, palatal, mesial, and distal bone thickness around maxillary central and lateral incisors and canines and height from crest to apex, using cone beam computed tomography (CBCT) images and compare the results based on gender. The second objective of the study was to measure root angulation on CBCT images and its relation with the labial cortical thicknesses.  Material and Methods: After the Institutional Review Board (IRB) approval, a total of 140 CBCT volumes were included in this study according to the set criteria. On each scan, right-side maxillary central, lateral incisors, and canine were selected for the measurements. All the measurements were done at three levels at the alveolar crest (L1), mid-root (L2), and apical region (L3) for each tooth.  Results: The Student's t-test was performed to compare the result of buccal, palatal, mesial, and distal bone thickness, angulation, and height of all subjects. Buccal alveolar bone thickness was minimum at the mid-root region, and the palatal bone thickness was minimum at the crestal region. The mesial bone thickness was minimum at the mid-root level, and distal bone thickness was minimum at the crest level. The available bone height was maximum at the lateral incisor and equal for the central incisor and canine. The canine was the most angulated tooth. CONCLUSION:  Cone beam computed tomography is a reliable imaging modality to evaluate pre-surgical immediate implant sites and measure alveolar bone thickness. The canine was the most angulated tooth with more buccal alveolar bone thickness.

Magnetic Resonance Imaging Features of Progressive Condylar Resorption: A Case Report.

Progressive condylar resorption is a dysfunctional remodeling of the temporomandibular joint of unknown origin. It usually manifests in young girls and causes reduced ramus height, loss of condylar volume, steep mandibular angle, limited jaw motion, and pain. On magnetic resonance imaging, the condition is associated with anterior disc displacement with or without reduction. This article discusses imaging features of progressive condylar resorption that cause severe temporomandibular joint degenerative changes, emphasizing the careful evaluation of imaging changes of the temporomandibular joint in young female patients. The early diagnosis of progressive condylar resorption helps to reduce the further progression of the condition.

Quantitative indices for cone-beam CT assessment of Medication-Related Osteonecrosis of the Jaw - a scoping review.

Objectives: It is not unusual for Medication-related osteonecrosis of the jaw (MRONJ) lesions that have similar clinical presentation and staging to have dissimilar radiographic extent of disease. The aim of this review was to explore the published scientific literature for quantitative indices that describe the cone-beam computerized tomography (CBCT) radiographic features of MRONJ lesions and assess their clinical utility. Method and Materials: A scoping review of the literature was performed to identify quantitative indices developed to describe the CBCT radiographic features of MRONJ lesions. Five electronic databases were included in the review: PubMed, Scopus, Web of Science, Trip medical database, and Cochrane Library. Articles published from the year 2003 onward were included in the review. Results: 367 articles were initially included in the review. 39 abstracts were screened for full-text assessment. The scoping review yielded 12 full length articles with169 cases reported. The Composite Radiographic Index score (CRI score) was identified as the most meaningful index in published literature that attempted to quantify qualitative radiographic changes (Walton, Grogan et al. 2019). However, lesions with similar CRI scores that corresponded to intermediate severity (3-5) may be very dissimilar radiographically in both nature and extent of radiographic changes, undercutting its clinical value. Conclusion: The CRI index score was the only relevant index for cross-sectional (one-time) assessment of established MRONJ lesions (non-stage 0). This scoping review yielded several critical questions regarding the clinical significance and prognostic implications of various radiographic changes in MRONJ, thereby identifying focus areas for future research.

Accuracy and Reliability of CBCT Compared to Clinical Probing in Detection of Trifurcation Defects: An In Vivo Study.

Background: Furcation defects are areas of pathological bone resorption in multirooted teeth. The aim of the study was to compare the measurements of trifurcation bone loss, measured using CBCT, versus clinical measurements in order to evaluate the efficacy of CBCT as an adjunctive diagnostic tool. Material and Methods. The included patients had both CBCT scans for maxillary molars and completed periodontal charts. Clinical examination consisted of probing and detection of vertical and horizontal furcation defects. These were measured and recorded. CBCT measurements were then evaluated using the linear measuring tool in Carestream imaging software (Carestream, Rochester, USA) and iCAT (Imaging Sciences, Hatfield, USA). These measurements of the CBCT images were then documented and compared to clinical findings. The two examiners were blinded to each other's measurements. Results: The most common tooth with a detected furcation defect was tooth #2 (31.7%), followed by tooth #15 (26.8%) and #3 (21.9%). The least common tooth with a detected furcation defect was #14 (19.5%). The mean values of buccal furcation for clinical and CBCT measurements were 3.01 mm and 2.6 mm, respectively. The measurements of mesial furcation were 2.5 mm and 2.2 mm for CBCT. The distal measurement of clinical examination was 2.7 mm and for CBCT was 2.44 mm. Conclusion: CBCT can be used as an adjunct to clinical furcation measurements and adds useful diagnostic information to assess trifurcation defects. In addition, CBCT limited field of view (FOV) can provide relatively high-resolution images at a reduced dose that is comparable to two-dimensional imaging.

Physiologic and Pathologic Calcifications of Head and Neck Significant to the Dentist.

This article aims to help the practitioner identify structures found in routine three-dimensional imaging studies of the head and neck region and understand their significance and possible need for intervention. The prevalence of advanced imaging in dental practice, especially cone beam computed tomography, highlights the need to recognize and identify various high-density structures that are, in fact, soft tissue calcifications or alterations of normal bony anatomy. The wide range of these findings includes both benign and malignant pathologic entities as well as age-related calcifications and remodeling of normal anatomic structures and dystrophic calcifications.

Cone beam computed tomographic-Based retrospective study on newark population for the assessment of distance between incisive canal and maxillary central incisors: Clinical implications.

AIMS: To calculate the relative distance between the incisive canal and maxillary central incisors using cone beam computed tomography (CBCT) and utilize the results in treatment planning in a clinical setting. METHODS AND MATERIALS: A retrospective study was conducted on CBCT taken for other purposes in the Oral and Maxillofacial Radiology Department. All the quantitative measurements were performed between the incisive canal and both maxillary central incisors using CBCT on 61 subjects. The anterior-posterior measurements were taken on both sides and the average of both values was considered for the statistical analysis. All the linear measurements were performed on the axial plane at three different vertical reference points located on the sagittal plane. STATISTICAL ANALYSIS: The interexaminer reliability was tested by interclass correlation coefficient using two-way mixed and absolute agreement model. The comparison of linear measurement among each level was done by "Repeated measure ANOVA" and contrast method was used for pair-wise comparison when repeated measure analysis of variance (ANOVA) was significant. RESULTS: The average anterior-posterior distance between the maxillary central incisor roots and the incisive canal measured was approximately 5-6 mm. The incisive canal width increases from the root apex level of maxillary central incisors (P3) to the oral opening level of the incisive canal (P1). CONCLUSIONS: The results of our study could be helpful in a clinical setting requires significant retraction of maxillary incisors or implant placement in maxillary anterior region.

Maxillary ameloblastoma in an 8-year-old child: A case report with a review of the literature.

Ameloblastoma is a benign locally invasive tumor with a high tendency to recur. It is considered rare in the pediatric population, with most cases diagnosed in the third to fifth decades of life. Approximately 80% of ameloblastomas occur in the molar and ramus region of the mandible, while 20% of cases occur in the maxillary posterior region. This report presents a case of plexiform ameloblastoma in an uncommon location in an 8-year-old child. The lesion was initially thought to be a dentigerous cyst, based on its location and radiographic appearance. The clinical and radiographic features, histopathology, and treatment of solid, plexiform, maxillary ameloblastoma are reviewed, with an added emphasis on a literature review of ameloblastoma in children. This report emphasize the importance of long-term follow-up, since recurrence may occur many years after initial tumor removal.

Clinical and radiological findings in a severe case of cleidocranial dysplasia.

Cleidocranial dysplasia (CCD) is a rare congenital autosomal dominant condition, causing hypoplasia of the clavicle, abnormal formation of teeth, skeletal and craniofacial bones. CCD is caused by the mutation of RUNX2/CBFA1 present in the short arm of chromosome 6 at position 21.1, a transcription factor essential for the formation of teeth, cartilage and bone. Patients with CCD show the classical features of excessive mobility of the shoulder bone, lack of resorption of the deciduous teeth, failure to erupt permanent teeth, multiple impacted and supernumerary teeth, and open fontanelle and sutures of the skull. In this article we report a case of CCD in a 16-year-old male patient, with an aim to highlight the clinical, radiological and recommended treatment guidelines.

Interpretation of cone beam computed tomography volumetric data: How to report findings?

Cone beam computed tomography (CBCT) was introduced to the dental profession at the beginning of the new millennium and has become an integral part of dental practice, especially within the surgical specialties. With advances in technology and the introduction of new-generation digital detectors, the concomitant increase in pixel resolution provided the ability to discern fine details of the anatomy. This article focuses on the methodology of CBCT interpretation and reporting. Details of reviewing the volume thoroughly are described with relevant citations. The article summarizes the overall methodical interpretation of CBCT data that is essential to every dentist who uses the technology.

Diagnostic Imaging of Malignant Tumors in the Orofacial Region.

Though rare, malignancies of the orofacial region often have serious consequences. Malignancies of the orofacial region are typically discovered during a clinical examination or from a patient complaint. Initial discovery from a radiograph is rare. Three-dimensional imaging using advanced imaging techniques often provides adequate information about the aggressive nature of a lesion. Radiographically based imaging demonstrates mainly hard-tissue destruction and, rarely, bone deposition. MRI provides excellent visualization of soft-tissue densities without using ionizing radiation. Functional imaging is used to visualize increased metabolic activity associated with malignancies, and is excellent for determining the metastatic spread of a lesion.