ABSTRACT
The combined contamination of terrestrial environments by metal(loid)s (MEs) and microplastics (MPs) is a major environmental issue. Once MPs enter soils, they can interact with MEs and modify their environmental availability, environmental bioavailability, and potential toxic effects on biota. Although research efforts have been made to describe the underlying mechanisms driving MP and ME interactions, the effects of MPs on ME bioavailability in terrestrial Mollusca have not yet been documented. To fill this gap, we exposed the terrestrial snail Cantareus aspersus to different combinations of polystyrene (PS) and arsenic (As), cadmium (Cd), or mercury (Hg) concentrations. Using kinetic approaches, we then assessed the variations in the environmental availability of As, Cd or Hg after three weeks of equilibration and in the environmental bioavailability of As, Cd or Hg to snails after four weeks of exposure. We showed that while environmental availability was influenced by the total ME concentration, the effects of PS were limited. Although an increase in As availability was observed for the highest exposure concentrations at the beginning of the experiment, the soil ageing processes led to rapid adsorption in the soil regardless of the PS particle concentration. Concerning transfers to snail, ME bioaccumulation was ME concentration-dependent but not modified by the PS concentration in the soils. Nevertheless, the kinetic approaches evidenced an increase in As (2- to 2.6-fold) and Cd (1.6-fold), but not Hg, environmental bioavailability or excretion (2.3- to 3.6-fold for As, 1.8-fold for Cd) at low PS concentrations. However, these impacts were no longer observable at the highest PS exposure concentrations because of the increase in the bioaccessibility of MEs in the snail digestive tract. The generalization of such hormetic responses and the identification of the precise mechanisms involved necessitate further research to deepen our understanding of the MP-mediated behaviour of MEs in co-occurring scenarios.
Subject(s)
Arsenic , Cadmium , Mercury , Polystyrenes , Snails , Soil Pollutants , Animals , Cadmium/metabolism , Arsenic/metabolism , Mercury/metabolism , Soil/chemistry , Biological Availability , Environmental MonitoringABSTRACT
This study describes the valorization of a pine wood by-product (Pinus pinaster) in the form of individualized fibers to a complex copper or more broadly metals present in an aqueous solution using a batch process. The adsorption results show that pine fibres activated by sodium carbonate are effective in recovering copper ions from monocontaminated or polycontaminated solutions of varying concentrations in a few minutes. One gram of material captures 2.5 mg of copper present in 100 mL of solution at pH 5 in less than 10 min. The results are perfectly reproducible and independent of pH between 3 and 5. The presence of the Na+ cation at concentrations of 0.1 M has no impact on material performance, unlike that of Ca2+ ions, which competes with Cu2+ ions for active sites. The adsorption process can be considered as rapid, as most of the copper is adsorbed within the first 10 min of exposure. Investigation of modeling possibilities shows some limitations. Indeed, the Weber and Morris and Elovich models show poor possibilities to describe all the kinetic data for copper adsorption on fibres. This may prove that the mechanism is far more complex than simple physisorption, chemisorption and/or diffusion. Complexation by wood fibers can be extended to solutions containing several types of metals. The results of this study show that the field of selective metal recovery could be a new way of valorizing by-products from the wood industry.
Subject(s)
Pinus , Water Pollutants, Chemical , Copper/chemistry , Diffusion , Cations , Adsorption , Hydrogen-Ion Concentration , Kinetics , Solutions , WoodABSTRACT
The Réunion harrier is an endemic raptor on Réunion Island. Several threats endanger its population, poisoning by rodenticides being considered as the main one currently. No information is available on its exposure to other chemicals notably trace metal elements such as lead (Pb), mercury (Hg), and cadmium (Cd). The Réunion harrier is still a victim of poaching nowadays. When shooting is not lethal, animals may carry embedded shot in their body and thus be exposed to toxic level of Pb as demonstrated for other raptors. Moreover, recent monitoring suggests a decrease of its breeding success over time. It is known that Hg and Cd could impair reproduction and disturb embryo development in birds. The aim is to measure metal concentrations in the tissues of 30 carcasses of harrier collected from 2016 to 2021. Lead was analyzed in the liver and humerus, while Hg and Cd were measured in livers. Concentrations were compared to toxicological reference values. Overall, the Réunion harrier was not exposed to toxic levels of Pb or Cd. For Hg, 53% of the individuals have residues higher than the threshold compatible with oxidative stress, and 13% have liver concentrations above those compatible with reproduction impairment. A positive correlation was found between the proportion of urban habitat in a 55 km2 area centered on the location where the harrier was found and the concentration of Hg in the liver. We conclude that Hg exposure could be a threat for the Réunion harrier population and recommend monitoring the exposure of the most sensitive stages, i.e., embryos and nestlings, to this metal with non-invasive methods.
Subject(s)
Mercury , Metals, Heavy , Raptors , Animals , Cadmium/toxicity , Reunion , Lead , Mercury/toxicity , Birds , Metals, Heavy/analysis , Environmental MonitoringABSTRACT
Triazole fungicides are widely used to treat fungal pathogens in field crops, but very few studies have investigated whether fields of these crops constitute hotspots of azole resistance in Aspergillus fumigatus. Soil samples were collected from 22 fields in two regions of eastern France and screened for triazole residues and azole-resistant A. fumigatus (ARAf). Real-time quantitative PCR (qPCR) was used to quantify A. fumigatus in these soil samples. All the plots contained tebuconazole at concentrations from 5.5 to 19.1 ng/g of soil, and 5 of the 22 plots also contained epoxiconazole. Only a few fungal isolates were obtained, and no ARAf was detected. A. fumigatus qPCR showed that this fungal species was, on average, 5000 times more common in soil from flowerbeds containing ARAf than in soil from field crops. Thus, field-crop soils do not appear to promote A. fumigatus development, even if treated with azole fungicides, and cannot be considered hotspots of resistance. Indeed, our results suggest that they are instead a coldspot of resistance and highlight how little is known about the ecological niche of this species.
ABSTRACT
Environmental risk assessment of contaminated soils requires bioindicators that allow the assessment of bioavailability and toxicity of chemicals. Although many bioassays can determine the ecotoxicity of soil samples in the laboratory, few are available and standardized for on-site application. Bioassays based on specific threshold values that assess the in situ and ex situ bioavailability and risk of metal(loid)s and polycyclic aromatic hydrocarbons (PAHs) in soils to the land snail Cantareus aspersus have never been simultaneously applied to the same soils. The aims of this study were to compare the results provided by in situ and ex situ bioassays and to determine their respective importance for environmental risk assessment. The feasibility and reproducibility of the in situ bioassay were assessed using an international ring test. This study used five plots located at a former industrial site and six laboratories participated in the ring test. The results revealed the impact of environmental parameters on the bioavailability of metal(loid)s and PAHs to snails exposed in the field to structured soils and vegetation compared to those exposed under laboratory conditions to soil collected from the same field site (excavated soils). The risk coefficients were generally higher ex situ than in situ, with some exceptions (mainly due to Cd and Mo), which might be explained by the in situ contribution of plants and humus layer as sources of exposure of snails to contaminants and by climatic parameters. The ring test showed good agreement among laboratories, which determined the same levels of risk in most of the plots. Comparison of the bioavailability to land snails and the subsequent risk estimated in situ or ex situ highlighted the complementarity between both approaches in the environmental risk assessment of contaminated soils, namely, to guide decisions on the fate and future use of the sites (e.g., excavation, embankments, and land restoration). Integr Environ Assess Manag 2022;18:539-554. © 2021 SETAC.
Subject(s)
Polycyclic Aromatic Hydrocarbons , Soil Pollutants , Biological Assay , Environmental Monitoring , Polycyclic Aromatic Hydrocarbons/analysis , Polycyclic Aromatic Hydrocarbons/toxicity , Reproducibility of Results , Risk Assessment , Soil , Soil Pollutants/analysis , Soil Pollutants/toxicityABSTRACT
Alkylphenols are industrial pollutants commonly present in wastewater. They are difficult to eliminate by conventional treatment processes, ending up in the sludge of wastewater treatment plants. In this study, we propose to use cross-linked cyclodextrin-based polymers (ECP) as sorbents to treat three alkylphenols, namely, one nonylphenol (4-n-NP) and two octylphenols (4-n-OP and 4-tert-OP), present in aqueous solution by a batch method. The experiments were carried out with five cyclodextrin polymers (α-ECP, ß-ECP, γ-ECP, α,ß,γ-ECP, and HP-ß-ECP). Sorption results showed that all polymers, with the exception of α-ECP, had high sorption capacities between 60 and 100% of the alkylphenols in the concentration range studied (between 25 and 100 µg/L). In all cases, HP-ß-ECP has shown the highest removals, regardless of the structure of the molecule. The order obtained was HP-ß-ECP >> ß-ECP ~ α,ß,γ-ECP >> γ-ECP > α-ECP. The 4-tert-OP compound was the best adsorbed, regardless the material and the solution studied. Sorption results also indicated that (i) the sorption efficiency decreased with the increasing of alkylphenol concentration; (ii) sodium chloride had a strong negative effect on the sorption process; and (iii) the performance remained unchanged after five sorption-regeneration cycles. The main sorption mechanism of alkylphenols occurring in ECP was the inclusion within the cyclodextrin cavities. The obtained results proved that cyclodextrin polymers could serve as efficient sorbents for the removal of alkylphenols from real effluents.
Subject(s)
Cyclodextrins , Water Pollutants, Chemical , Phenols , Polymers , Water Pollutants, Chemical/analysisABSTRACT
FINEAU (2021-2024) is a trans-disciplinary research project involving French, Serbian, Italian, Portuguese and Romanian colleagues, a French agricultural cooperative and two surface-treatment industries, intending to propose chènevotte, a co-product of the hemp industry, as an adsorbent for the removal of pollutants from polycontaminated wastewater. The first objective of FINEAU was to prepare and characterize chènevotte-based materials. In this study, the impact of water washing and treatments (KOH, Na2CO3 and H3PO4) on the composition and structure of chènevotte (also called hemp shives) was evaluated using chemical analysis, X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray computed nanotomography (nano-CT), attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, solid state NMR spectroscopy and thermogravimetric analysis. The results showed that all these techniques are complementary and useful to characterize the structure and morphology of the samples. Before any chemical treatment, the presence of impurities with a compact unfibrillated structure on the surfaces of chènevotte samples was found. Data indicated an increase in the crystallinity index and significant changes in the chemical composition of each sample after treatment as well as in surface morphology and roughness. The most significant changes were observed in alkaline-treated samples, especially those treated with KOH.
Subject(s)
Cannabis/chemistry , Crops, Agricultural/chemistry , Waste Products/analysis , Wastewater/chemistry , Water Pollutants, Chemical/isolation & purification , Adsorption , Europe , Humans , Kinetics , Materials Testing , ThermogravimetryABSTRACT
Lignocellulosic fibers extracted from plants are considered an interesting raw material for environmentally friendly products with multiple applications. This work investigated the feasibility of using hemp- and flax-based materials in the form of felts as biosorbents for the removal of metals present in aqueous solutions. Biosorption of Al, Cd, Co, Cu, Mn, Ni and Zn from a single solution by the two lignocellulosic-based felts was examined using a batch mode. The parameters studied were initial metal concentration, adsorbent dosage, contact time, and pH. In controlled conditions, the results showed that: (i) the flax-based felt had higher biosorption capacities with respect to the metals studied than the hemp-based felt; (ii) the highest removal efficiency was always obtained for Cu ions, and the following order of Cu > Cd > Zn > Ni > Co > Al > Mn was found for both examined biosorbents; (iii) the process was rapid and 10 min were sufficient to attain the equilibrium; (iv) the efficiency improved with the increase of the adsorbent dosage; and (v) the biosorption capacities were independent of pH between 4 and 6. Based on the obtained results, it can be considered that plant-based felts are new, efficient materials for metal removal.
Subject(s)
Cannabis/chemistry , Flax/chemistry , Metals, Heavy/analysis , Metals, Heavy/isolation & purification , Water Pollutants, Chemical/analysis , Water Pollutants, Chemical/isolation & purification , Water Purification/methods , Adsorption , Lignin/chemistry , Metals, Heavy/metabolism , Water Pollutants, Chemical/metabolismABSTRACT
Free-range livestock are exposed to environmental contaminants by ingesting contaminated matrices mainly soil. Several works evaluated precisely the soil ingestion and its variation factors in ruminants. Contrary to temperate grazing systems, tropical ones were poorly documented whereas weather or traditional grazing practices may change models established in temperate systems. The study was performed in the French West Indies, which are concerned by a widespread environmental chlordecone contamination. The work evaluated daily soil and grass ingestions by tethered growing bulls grazing on a very high sward close to 50 cm for 11 days without being moved. This grazing management is representative to local practices by small farmers or not professional holders and allows completing the results previously obtained. Daily soil ingestion did not significantly increase across time and was on average 26.9 g dry matter/100 kg body weight (i.e. 1.4% of the total mass ingested). Marked individual variations indicated that exposure risk assessments would require experimental designs based on a sufficient number of individuals. This study was also the first to investigate the changes in sward soiling with respect to the distance from the stake and reported lower soil loading on grass in the peripheral than central and intermediate areas.
ABSTRACT
Stabilization/solidification is widely used for the immobilization of pollutants in matrices. This work addresses the effect of illite amendment to a liquid coal tar on organic compounds (OCs) immobilization, especially PAHs and BTEX. For practical purpose, illite was selected as raw clay material available on the coal tar contaminated site. Contaminants availability and ecotoxicity of clay/tar matrices at various ratios and considering several treatments were assessed. Varying the tar mass fraction from 1 to 0.12, strongly viscous pastes, pellets and powders were obtained successively, with minimal contaminant mobility observed for tar fractions ranging from 0.28 to 0.80. Pellets obtained for the tar fraction of 0.33 were particularly studied for toxicity tests, because of their ease of handling. Using the land snail Cantareus aspersus as an ecotoxicity probe, mechanisms of PAHs bioavailability considering several treatments were studied. Considering either land snails for direct contact or exposed to vapors, or Lymnaea stagnalis for contact with leachates, toxicity of matrices decreased with ageing or even better with incineration.
Subject(s)
Clay/chemistry , Coal Tar/toxicity , Environmental Pollutants/toxicity , Environmental Restoration and Remediation/methods , Incineration , Polycyclic Aromatic Hydrocarbons/analysis , Toxicity TestsABSTRACT
Triazole molecules are used to manage invasive aspergillosis, a fungal infection mainly due to Aspergillus fumigatus. A. fumigatus is not a phytopathogen, but, as it is widespread in soils, triazole fungicides have an unintended impact on it, selecting resistant populations' in environment. Thus, to maintain our ability to control fungal infections, whether in human health or agriculture, reduce the impact of the use of triazoles in the environment is important, notably limiting their diffusion in soils. Here we tested a hemp-based material as adsorbent to limit the spread of difenoconazole, a triazole fungicide, in vegetable soils. We studied the effects of contact time, material dose, difenoconazole concentration, and organic content of the soil using batch mode and percolation methods. Batch experiments showed that the material exhibited high adsorption capacities toward difenoconazole. Removal from the soil water increased from 46.6% using 0.35 g hemp per kg of soil to 77.0% using 1.75 g hemp per kg, for a contact time of 15 min and an initial difenoconazole concentration of 1.2 mg/L. For a contact time of 240 min, the removal was 93.5%. Percolation experiments showed that the quantity of difenoconazole removed was greater than the amount obtained by batch method: 41.9% of removal with only one passes of solution at a concentration of 12 mg/L is obtained through percolation technique whereas, with similar conditions, only 20% of removal is obtained by batch method, i.e. after 1 min of contact. The removal was strongly dependent on the number of passes: the values increased from 57.0% to 91.0% with increasing the number of passes from 1 to 15. Addition of hemp to soils allows to remove efficiently the difenoconazole fungicide from soil water. Hemp-based felt is a new and safe adsorbent that can be applied in agriculture to limit crop contamination.
ABSTRACT
Ingested soil is a major vector of organic contaminants from environment to free-ranged animals, particularly for grazing herbivores. Therefore, a better understanding of processes driving soil intake may provide new insights to limit animal exposure to contaminants and ensure safety of animal products. To maintain the supply service of livestock farming activities in contaminated areas, it is necessary to design adapted farming practices aiming at controlling the risk for human health. This study was conducted in the French West Indies, where chlordecone, an organochlorine insecticide previously used to protect banana plantation against the black weevil and banned since 1993, has polluted nearly 20% of agricultural surfaces since the 1970s. A crossover study design was performed to estimate soil intake by twelve tethered Creole young bulls according to different grazing practices. The objectives were to characterize the influence of (i) daily herbage allowance (LOW, HIGH, ADLIB: 100, 150, 300â¯gâ¯DM/kg BW0.75 respectively); (ii) and soil surface moisture (SSM) testing grazing on a water-saturated (HUM) vs dried (DRY) ground. The herbage offer was managed via the allocated surfaces varying the chain length as animal holders commonly do in informal Caribbean systems. The results evidenced an increase in soil intake with DHA reduction (2.1 to 3.8% of DM intake; Pâ¯<â¯0.05) and with SSM increase (2.4 to 3.6% of DM intake; Pâ¯<â¯0.05). Herbage offer reduction involved a closer-to-the-ground grazing with shorter post-grazing sward surface height (82.2 to 63.3â¯mm; Pâ¯<â¯0.001), and both herbage offer reduction and SSM increase amplified sward soiling (measured from titanium content in unwashed herbage and image analysis). This work showed that soil intake is unavoidable even when herbage offer is very generous. The animals will significantly increase soil intake when herbage offer would be at 150â¯gâ¯DM/kg BW0.75 or less, especially when the grazed surface is humid.
Subject(s)
Animal Husbandry , Chlordecone/analysis , Insecticides/analysis , Soil Pollutants/analysis , Animals , Cattle , Chlordecone/metabolism , Herbivory , Insecticides/metabolism , Soil , Soil Pollutants/metabolism , West IndiesABSTRACT
Medical azole antifungals are major compounds used to prevent and to treat invasive aspergillosis (IA). Azole fungicides, called DMI (14-alpha demethylase inhibitors), are also widely used for crop protection and have been reported to be linked to azole-resistant A. fumigatus (aR-Af) development in the environment. The aim of this study was to determine whether or not market gardens that spray DMIs in Eastern France are also affected by the presence of aR-Af. Forty aR-Afs were detected in soils in only two of the four market gardens using DMIs, with 23% (7/30) and 10% (3/30) of soils containing aR-Af. A total of 87.5% of these isolates had the TR34/L98H mutation and 22.5% the TR46/Y121F/T289A mutation on the cyp51A gene. Analyses of residual azole concentrations in soils showed the presence of difenoconazole for up to 2 years after spraying, but only in soils of market gardens where aR-Af was detected. It is very important to identify professional activities that could lead to aR-Af development and to develop preventive measures for at-risk patients living near professional activities using DMIs. We have to better understand why, in some cases, the use of DMI is not linked to aR-Af. Measures should be taken to avoid the use of DMI conferring cross-resistance to preserve the efficiency of human therapeutics.
Subject(s)
Aspergillus fumigatus/drug effects , Azoles/pharmacology , Drug Residues/analysis , Drug Resistance, Fungal , Fungicides, Industrial/pharmacology , Soil Pollutants/analysis , Aspergillus fumigatus/genetics , Aspergillus fumigatus/isolation & purification , Dioxolanes/analysis , France , Fungi/drug effects , Gardens/economics , Gardens/statistics & numerical data , Humans , Soil/chemistry , Triazoles/analysisABSTRACT
In this study, an adsorption-oriented process for the removal of fungicides from polycontaminated aqueous solutions was applied. To remove triazole fungicides from aqueous mixtures of propiconazole (PROPI), tebuconazole (TEBU), epoxiconazole (EPOXI), bromuconazole (BROMU) and difenoconazole (DIFENO), several materials used as adsorbents were compared using batch experiments, namely two conventional activated carbons (ACs) and five nonconventional cross-linked cyclodextrin (CD)-based materials (α-CDP, ß-CDP, γ-CDP, αßγ-CDP mixture, and hydroxypropyl-ß-CDP). This article presents the abatements obtained. As expected, ACs exhibited the highest levels of triazole fungicide removal: the treatment lowered the five azoles by more than 99%, and adsorption was non-selective. Concerning CD-based materials employed for the first time for the removal of fungicides from polycontaminated aqueous solutions, results were interesting in particular for hydroxypropyl-ß-CDP: 1 g of adsorbent placed in 1 L of solution containing 1 mg of each of five triazoles (5 mg in total) was able to remove over half of the fungicide amount (2.97 mg). The order obtained was the following: BROMU << PROPI â EPOXI < TEBU << DIFENO. This indicates that, in the mixture studied, strong competition prevailed among fungicides for the binding sites.
ABSTRACT
Selenium (Se) removal from synthetic solutions and from real Flue Gas Desulfurization (FGD) wastewater generated by a coal-fired power plant was studied for the first time using a commercial iron oxide impregnated strong base anion exchange resin, Purolite® FerrIX A33E. In synthetic solutions, the resin showed high affinity for selenate and selenite, while sulfate exhibited a strong competition for both oxyanions. The FGD wastewater investigated is a complex system that contains Se (â¼1200 µg L-1), SO42- (â¼1.1 g L-1), Cl- (â¼9.5 g L-1), and Ca2+ (â¼5 g L-1), alongside a broad spectrum of toxic trace metals including Cd, Cr, Hg, Ni, and Zn. The resin performed poorly against Se in the raw FGD wastewater and showed moderate to good removal of several trace elements such as Cd, Cr, Hg, and Zn. In FGD effluent, sulfate was identified as a powerful competing anion for Se, having high affinity for the exchange active sites of the resin. The desulfurization of the FGD effluent using BaCl2 led to the increase in Se removal from 3% (non-desulfurized effluent) to 80% (desulfurized effluent) by combined precipitation and ion exchange treatment. However, complete desulfurization using equimolar BaCl2 could not be achieved due to the presence of bicarbonate that acts as a sulfate competitor for barium. In addition to selenium and sulfate removal, several toxic metals were efficiently removed (Cd: 91%; Cr: 100%; Zn: 99%) by the combined (desulfurization and ion exchange) treatment.
Subject(s)
Anion Exchange Resins/chemistry , Ferric Compounds/chemistry , Selenium/analysis , Sulfates/analysis , Water Pollutants, Chemical/analysis , Water Purification/methods , Barium Compounds/chemistry , Chlorides/chemistry , Metals, Heavy/analysis , Power Plants , Trace Elements/analysis , Wastewater/chemistryABSTRACT
In this study, a polymer, prepared by crosslinking cyclodextrin (CD) by means of a polycarboxylic acid, was used for the removal of pollutants from spiked solutions and discharge waters from the surface treatment industry. In spiked solutions containing five metals, sixteen polycyclic aromatic hydrocarbons (PAH) and three alkylphenols (AP), the material exhibited high adsorption capacities: >99% of Co2+, Ni2+ and Zn2+ were removed, between 65 and 82% of the PAHs, as well as 69 to 90% of the APs. Due to the structure of the polymer and its specific characteristics, such as the presence of carboxylic groups and CD cavities, the adsorption mechanism involves four main interactions: ion exchange, electrostatic interactions and precipitation for metal removal, and inclusion complexes for organics removal. In industrial discharge waters, competition effects appeared, especially because of the presence of calcium at high concentrations, which competed with other pollutants for the adsorption sites of the adsorbent.
ABSTRACT
To better understand the fate of metals in the environment, numerous parameters must be studied, such as the soil properties and the different sources of contamination for the organisms. Among bioindicators of soil quality, the garden snail (Cantareus aspersus) integrates multiple sources (e.g. soil, plant) and routes (e.g. digestive, cutaneous) of contamination. However, the contribution of each source on metal bioavailability and how soil properties influence these contributions have never been studied when considering the dynamic process of bioavailability. Using accumulation kinetics, this study showed that the main assimilation source of Cd was lettuce (68%), whereas the main source of Pb was the soil (90%). The plant contribution increased in response to a 2-unit soil pH decrease. Unexpectedly, an increase in the soil contribution to metal assimilation accompanied an increase in the organic matter (OM) content of the soil. For both metals, no significant excretion and influence of source on excretion have been modelled either during exposure or depuration. This study highlights how the contribution of different sources to metal bioavailability changes based on changes in soil parameters, such as pH and OM, and the complexity of the processes that modulate metal bioavailability.
Subject(s)
Cadmium/analysis , Environmental Monitoring/methods , Lead/analysis , Snails/metabolism , Soil Pollutants/analysis , Animals , Biological Availability , Cadmium/metabolism , Lead/metabolism , Lactuca/chemistry , Snails/drug effects , Soil/chemistry , Soil Pollutants/metabolismABSTRACT
This study investigates the variations of polycyclic aromatic hydrocarbon (PAH) levels in surface water, suspended particulate matter (SPM) and sediment upstream and downstream of the discharges of two wastewater treatment plant (WWTP) effluents. Relationships between the levels of PAHs in these different matrices were also investigated. The sum of 16 US EPA PAHs ranged from 73.5 to 728.0 ng L(-1) in surface water and from 85.4 to 313.1 ng L(-1) in effluent. In SPM and sediment, ∑16PAHs ranged from 749.6 to 2,463 µg kg(-1) and from 690.7 µg kg(-1) to 3,625.6 µg kg(-1), respectively. Investigations performed upstream and downstream of both studied WWTPs showed that WWTP discharges may contribute to the overall PAH contaminations in the Loue and the Doubs rivers. Comparison between gammarid populations upstream and downstream of WWTP discharge showed that biota was impacted by the WWTP effluents. When based only on surface water samples, the assessment of freshwater quality did not provide evidence for a marked PAH contamination in either of the rivers studied. However, using SPM and sediment samples, we found PAH contents exceeding sediment quality guidelines. We conclude that sediment and SPM are relevant matrices to assess overall PAH contamination in aquatic ecosystems. Furthermore, we found a positive linear correlation between PAH contents of SPM and sediment, showing that SPM represents an integrating matrix which is able to provide meaningful data about the overall contamination over a given time span.
Subject(s)
Environmental Monitoring/methods , Particulate Matter/analysis , Polycyclic Aromatic Hydrocarbons/analysis , Rivers/chemistry , Wastewater/chemistry , Water Pollutants, Chemical/analysis , France , Geologic Sediments/chemistry , Water QualityABSTRACT
For an accurate risk assessment of sites contaminated by trace elements (TE), measurements of bioavailability must be performed. This is routinely achieved using the standardized 0.01M CaCl2 method. However, the suitability of chemical extractions as proxies of bioavailability is questionable. We analyzed the correlations between chemically estimated TE bioavailability and TE actually accumulated by coupling plant and snails bioindicators. Results showed a better correlation between plant TE contents and CaCl2 fraction while total soil concentration better explained snail TE contents. However in both cases chemical measures were not suitable to predict TE accumulation and bioavailability. Considering the soil properties only improve the estimation of Cr, Ni and Pb accumulation by plants while for snails, TE contents in viscera were dependent both on soil and plant contents and soil properties. It highlights the complementarities of biomonitoring methods to assess bioavailability. This dual approach allows a "physiologically defined" evaluation of bioavailability.