Establishment of an at-line nanofractionation-based screening platform by coupling HPLC-MS/MS with high-throughput fluorescence polarization bioassay for natural SARS-CoV-2 fusion inhibitors.

In this study, a novel at-line nanofractionation platform was established for screening SARS-CoV-2 fusion inhibitors from natural products for the first time by combining HPLC-MS/MS with high-throughput fluorescence polarization (FP) bioassay. A time-course FP bioassay in 384 well-plates was conducted in parallel with MS/MS to simultaneously obtain chemical and biological information of potential fusion inhibitors in Lonicerae Japonicae Flos (LJF) and Lianhua Qingwen capsules (LHQW). Semi-preparative liquid chromatography and orthogonal HPLC separation were employed to enrich and better identify the co-eluted components. After comprehensive evaluation and validation, 28 potential SARS-CoV-2 fusion inhibitors were screened out and identified. Several compounds at low micromolar activity were validated by in vitro inhibitory assay, molecular docking, cytotoxicity test, and pseudovirus assay. Moreover, four potential dual-target inhibitors against influenza and COVID-19 were discovered from LJF using this method, offering novel insights for the development of future pharmaceuticals targeting epidemic respiratory diseases.

High-throughput discovery of highly selective reversible hMAO-B inhibitors based on at-line nanofractionation.

Human monoamine oxidase B (hMAO-B) has emerged as a pivotal therapeutic target for Parkinson's disease. Due to adverse effects and shortage of commercial drugs, there is a need for novel, highly selective, and reversible hMAO-B inhibitors with good blood-brain barrier permeability. In this study, a high-throughput at-line nanofractionation screening platform was established with extracts from Chuanxiong Rhizoma, which resulted in the discovery of 75 active compounds, including phenolic acids, volatile oils, and phthalides, two of which were highly selective novel natural phthalide hMAO-B inhibitors that were potent, selective, reversible and had good blood‒brain permeability. Molecular docking and molecular dynamics simulations elucidated the inhibition mechanism. Sedanolide (IC50 = 103 nmol/L; SI = 645) and neocnidilide (IC50 = 131 nmol/L; SI = 207) demonstrated their excellent potential as hMAO-B inhibitors. They offset the limitations of deactivating enzymes associated with irreversible hMAO-B inhibitors such as rasagiline. In SH-SY5Y cell assays, sedanolide (EC50 = 0.962 µmol/L) and neocnidilide (EC50 = 1.161 µmol/L) exhibited significant neuroprotective effects, comparable to the positive drugs rasagiline (EC50 = 0.896 µmol/L) and safinamide (EC50 = 1.079 µmol/L). These findings underscore the potential of sedanolide as a novel natural hMAO-B inhibitor that warrants further development as a promising drug candidate.

A magnetic beads-based ligand fishing method for rapid discovery of monoterpene indoles as monoamine oxidase A inhibitors from Hunteria zeylanica.

In this study, a novel magnetic bead-based ligand fishing method was developed for rapid discovery of monoterpene indoles as monoamine oxidase A inhibitors from natural products. In order to improve the screening efficiency, two different magnetic beads, i.e. amine and carboxyl terminated magnetic beads, were comprehensively compared in terms of their ability to immobilize monoamine oxidase A (MAOA), biocatalytic activity and specific adsorption rates for affinity ligands. Carboxyl terminated magnetic beads performed better for MAOA immobilization and demonstrated superior performance in ligand fishing. The MAOA immobilized magnetic beads were applied to screen novel monoamine oxidase inhibitors in an alkaloid-rich plant, Hunteria zeylanica. Twelve MAOA affinity ligands were screened out, and ten of them were identified as monoterpene indole alkaloids by HPLC-Obitrap-MS/MS. Among them, six ligands, namely geissoschizol, vobasinol, yohimbol, dihydrocorynanthenol, eburnamine and (+)-isoeburnamine which exhibited inhibitory activity against MAOA with low IC50 values. To further explore their inhibitory mechanism, enzyme kinetic analysis and molecular docking studies were conducted.

Supramolecular Mimotope Peptide Nanofibers Promote Antibody-Ligand Polyvalent and Instantaneous Recognition for Biopharmaceutical Analysis.

Peptide-based supramolecules exhibit great potential in various fields due to their improved target recognition ability and versatile functions. However, they still suffer from numerous challenges for the biopharmaceutical analysis, including poor self-assembly ability, undesirable ligand-antibody binding rates, and formidable target binding barriers caused by ligand crowding. To tackle these issues, a "polyvalent recognition" strategy employing the CD20 mimotope peptide derivative NBD-FFVLR-GS-WPRWLEN (acting on the CDR domains of rituximab) was proposed to develop supramolecular nanofibers for target antibody recognition. These nanofibers exhibited rapid self-assembly within only 1 min and robust stability. Their binding affinity (179 nM) for rituximab surpassed that of the monomeric peptide (7 µM) by over 38-fold, highlighting that high ligand density and potential polyvalent recognition can efficiently overcome the target binding barriers of traditional supramolecules. Moreover, these nanofibers exhibited an amazing "instantaneous capture" rate (within 15 s), a high recovery (93 ± 3%), and good specificity for the target antibody. High-efficiency enrichment of rituximab was achieved from cell culture medium with good recovery and reproducibility. Intriguingly, these peptide nanofibers combined with bottom-up proteomics were successful in tracking the deamidation of asparagine 55 (from 10 to 16%) on the rituximab heavy chain after 21 day incubation in human serum. In summary, this study may open up an avenue for the development of versatile mimotope peptide supramolecules for biorecognition and bioanalysis of biopharmaceuticals.

Mimotope peptide modified pompon mum-like magnetic microparticles for precise recognition, capture and biotransformation analysis of rituximab in biological fluids.

Due to low immobilized ligand density, limited binding capacity, and severe interference from serum proteins, developing ideal peptide-based biomaterials for precise recognition and in vivo analysis of biopharmaceuticals remains a huge challenge. In this study, mimotope peptide modified pompon mum-like biomimetic magnetic microparticles (MMPs, 3.8 µm) that mimic the specific functionalities of CD20 on malignant B cells were developed for the first time. Benefit from the numerous ligand binding sites (Ni2+) on the pompon mum-like MMPs, these novel materials achieved ≥10 times higher peptide ligand densities (>2300 mg/g) and antibody binding capacities (1380 mg/g) compared to previous reported biomaterials. Leveraging the high specificity of the mimotope peptide, rituximab can be precisely recognized and enriched from cell culture media or serum samples. We also established an LC‒MS/MS method using the MMPs for tracking rituximab biotransformation in patient serum. Intriguingly, deamidation of Asn55 and Asn33, as well as oxidation of Met81 and Met34 were observed at the key complementarity determining regions of rituximab, which could potentially influence antibody function and require careful monitoring. Overall, these versatile biomimetic MMPs demonstrate superior recognition and enrichment capabilities for target antibodies, offering interesting possibilities for biotransformation analysis of biopharmaceuticals in patient serum.

A chimeric hairpin DNA aptamer-based biosensor for monitoring the therapeutic drug bevacizumab.

The accurate and rapid detection of specific antibodies in blood is very important for efficient diagnosis and precise treatment. Conventional methods often suffer from time-consuming operations and/or a narrow detection range. In this work, for the rapid determination of bevacizumab in plasma, a series of chimeric hairpin DNA aptamer-based probes were designed by the modification, labeling and theoretical computation of an original aptamer. Then, the dissociation constant of the modified hairpin DNA to bevacizumab was measured and screened using microscale thermophoresis. The best chimeric hairpin DNA aptamer-based probe was then selected, and a one-step platform for the rapid determination of bevacizumab was constructed. This strategy has the advantages of being simple, fast and label-free. Because of the design and screening of the hairpin DNA, as well as the optimization of the concentration and electrochemical parameters, a low detection limit of 0.37 pM (0.054 ng mL-1) with a wide linear range (1 pM-1 µM) was obtained. Finally, the rationally constructed biosensor was successfully applied to the determination of bevacizumab in spiked samples, and it showed good accuracy and precision. This method is expected to truly realize accurate and rapid detection of bevacizumab and provides a new idea for the precise treatment of diseases.

Improvement of untargeted proteomics workflow for surfaceome profiling and its evaluation through the implementation of quality controls: Application to multiple myeloma.

BACKGROUND: Comprehensive surfaceome profiling of cancer cells using mass spectrometry (MS)-based technologies is a valuable approach to identify new antigens that could be targeted by immunotherapies. Multiple myeloma (MM) is an incurable hematological malignancy in which patients suffer from multiple relapses associated with drug resistance. Nevertheless, only three MM-specific antigens are currently targeted by approved immunotherapies which restrain the availability of efficient treatments for severe refractory patients affected by aggressive forms of the disease. Therefore, the discovery of new antigens in this context could open new perspectives for those patients. RESULTS: In this study, the first objective was to improve a MS-based untargeted proteomics workflow in order to handle limited patient samples. For this purpose, a highly sensitive and robust miniaturized separation system (LC-Chip) coupled with drift tube ion mobility spectrometry and high-resolution MS was integrated in our workflow to maximize protein identification. As sample preparation can strongly influence the detectability of membrane-associated proteins, the critical steps in sample preparation were carefully optimized. As a result, 4.5 times more membrane-associated proteins were identified and experimental throughput was also drastically improved. In addition to workflow performance, particular attention was paid to assess the quality of the generated data. Indeed, several quality controls (QC) were implemented to assess data quality. Finally, the optimized workflow as well as selected QCs were evaluated in the analysis of samples containing limited number of cells. SIGNIFICANCE: This work allowed the improvement of an untargeted proteomics workflow for surfaceome profiling in terms of performance. Besides, the reliability of the obtained data was evaluated through the introduction of QCs in the workflow. The applicability of the improved workflow as well as the implemented QCs for the analysis of MM primary cells obtained from patients was confirmed.

A targeted UHPLC-MS/MS method to monitor lipidomic changes during a physical effort: Optimization and application to blood microsamples from athletes.

In recent years, lipidomics have been widely developed to try to better understand many diseases or physical conditions. In this study, the aim was to evaluate the possibility to conduct reliable lipidomic studies using hemaPEN® microsampling devices. Targeted lipidomic analysis was applied to investigate the impact of a short and intense physical activity on lipids blood concentration. HemaPEN® microsampling device was used to easily collect several samples directly on an athletics track. This device allows the accurate collection of four blood samples (2.74 µL each) in a non-invasive way and without any specific skills. In this study, nineteen healthy volunteers aged from 19 to 27 were included. Participants ran 400 m warm-up and 1600 m as fast as possible. Blood samples were collected at five different time points. One sample was collected before the exercise, two during the physical activity and two after. An extraction process as well as an ultra-high-performance liquid chromatography coupled to tandem mass spectrometry (UHPLC-MS/MS) method were optimized to follow-up 11 compounds in these small volumes of blood. Blood concentration of five out of the eleven targeted analytes were significantly influenced by the physical exercise. Blood concentration of arachidonic acid, sphingosine and lactic acid were significantly increased after exercise, while concentration of 14:0 lysophosphatidylcholine and 18:1 lysophosphatidylcholine were significantly decreased.

Inside-Out Oriented Choline Phosphate-Based Biomimetic Magnetic Nanomaterials for Precise Recognition and Analysis of C-Reactive Protein.

Phospholipid-based materials exhibit great application potential in the fields of chemistry, biology, and pharmaceutical sciences. In this study, an inside-out oriented choline phosphate molecule, 2-{2-(methacryloyloxy)ethyldimethylammonium}ethyl n-butyl phosphate (MBP), was proposed and verified as a novel ligand of C-reactive protein (CRP) to enrich the functionality of these materials. Compared with phosphorylcholine (PC)-CRP interactions, the binding between MBP and CRP was not affected by the reverse position of phosphate and choline groups and even found more abundant binding sites. Thus, high-density MBP-grafted biomimetic magnetic nanomaterials (MBP-MNPs) were fabricated by reversible addition-fragmentation chain transfer polymerization based on thiol-ene click chemistry. The novel materials exhibited multifunctional applications for CRP including purification and ultrasensitive detection. On the one hand, higher specificity, recovery (90%), purity (95%), and static binding capacity (198.14 mg/g) for CRP were achieved on the novel materials in comparison with traditional PC-based materials, and the enriched CRP from patient serum can maintain its structural integrity and bioactivity. On the other hand, the CRP detection method combining G-quadruplex and thioflavin T developed with MBP-MNPs showed a lower detection limit (10 pM) and wider linear range (0.1-50 nM) than most PC-functionalized analytical platforms. Therefore, the inside-out oriented choline phosphate can not only precisely recognize CRP but also be combined with biomimetic nanomaterials to provide high application potential.

Rapid screening of neuraminidase inhibitors using an at-line nanofractionation platform involving parallel oseltamivir-sensitive/resistant neuraminidase bioassays.

In this study, an advanced at-line nanofractionation based screening platform was developed to screen potential neuraminidase inhibitors (NAIs) from Lonicera japonica Thunb by involving two parallel bioassays, for determining both oseltamivir-sensitive neuraminidase (NAS) and oseltamivir-resistant neuraminidase (NAR) inhibitory activities. 20 potential NAIs with both NAS and NAR inhibitory effects were screened from Lonicera japonica Thunb and identified by mass spectrometer, including 11 phenolic acids, 8 flavonoids and one iridoid glycoside. The proposed at-line nanofractionation based screening platform for NAIs was also used to rapidly screen nine batches of water extracts of Lonicera japonica Thunb or its similar species. Clear differences in the number and content of active components were easily observed, demonstrating that the proposed method possesses great potential for the quality control of herb medicines.

Contribution of Capillary Zone Electrophoresis Hyphenated with Drift Tube Ion Mobility Mass Spectrometry as a Complementary Tool to Microfluidic Reversed Phase Liquid Chromatography for Antigen Discovery.

The discovery of new antigens specific to multiple myeloma that could be targeted by novel immunotherapeutic approaches is currently of great interest. To this end, it is important to increase the number of proteins identified in the sample by combining different separation strategies. A capillary zone electrophoresis (CZE) method, coupled with drift tube ion mobility (DTIMS) and quadrupole time-of-flight mass spectrometry (QTOF), was developed for antigen discovery using the human myeloma cell line LP-1. This method was first optimized to obtain a maximum number of identifications. Then, its performance in terms of uniqueness of identifications was compared to data acquired by a microfluidic reverse phase liquid chromatography (RPLC) method. The orthogonality of these two approaches and the physicochemical properties of the entities identified by CZE and RPLC were evaluated. In addition, the contribution of DTIMS to CZE was investigated in terms of orthogonality as well as the ability to provide unique information. In conclusion, we believe that the combination of CZE-DTIMS-QTOF and microfluidic RPLC provides unique information in the context of antigen discovery.

Quality evaluation of Panax notoginseng (Burk.) F.H. Chen using supercritical fluid chromatography-mass spectrometry and chemical pattern recognition.

An efficient supercritical fluid chromatography-mass spectrometry (SFC-MS) method was developed for the quality evaluation of Panax Notoginseng (Burk) F.H. Chen (P. notoginseng) by combination with chemical pattern recognition (CPR). Design of experiments (DoE) was applied to obtain optimal SFC-MS conditions. Several CPR methods including hierarchical cluster analysis (HCA), principal component analysis (PCA) and partial least squares discriminant analysis (PLS-DA) were employed to establish a classification model based on the peak areas and contents of 12 components in P. notoginseng in order to evaluate the quality difference according to the collecting time (Chunqi and Dongqi) and medicinal parts (fibrous root, rhizome, branch root, and main root). PLS-DA has proved to be a satisfactory method with accurate discrimination of the selected samples. The characteristic variables based on the variable importance in projection (VIP) values were selected using PLS-DA. Three characteristic components (ginsenoside Rg2, ginsenoside Rg1, ginsenoside Rb1) with higher VIP values (>1) were chosen to further build the CPR model. Subsequently, the model was verified by testing another set of samples and the results indicated that the established model was satisfactory. PLS-DA models based on the peak areas of the 12 selected analytes in 30 batches of P. notoginseng could give accurate classification. The obtained results demonstrate that the developed method using SFC-MS and PLS-DA has a great potential for the quality assessment of P. notoginseng.

In vitro/in vivo degradation analysis of trastuzumab by combining specific capture on HER2 mimotope peptide modified material and LC-QTOF-MS.

Degradation analysis of therapeutic mAb is of high interest for critical quality attributes assessment and biotransformation studies. However, some obstacles, including low in vivo concentrations of mAb and complex biological matrices containing IgGs, could seriously interfere with mAb bioanalysis. In this study, a bioanalytical platform was developed for studying in vitro/in vivo modifications of trastuzumab, in which specific capture on mimotope peptide modified material was combined with trypsin digestion and LC-QTOF-MS analysis. It is worth noting that this material exhibits high specificity, suitable dynamic binding capacity, very little non-specific protein adsorption, and thus provides good enrichment and quantification performances for trastuzumab from patient serums. In particular, this bioanalytical platform was successfully applied to the dynamic monitoring of modifications of trastuzumab, such as deamidation, isomerization, oxidation and cyclization. Except for the faster deamidation of LC-Asn-30 and HC-Asn-387/392/393 under serum incubation, similar degradation trends for other sites were observed in phosphate buffer and spiked serum. Differences of peptide modification degrees of trastuzumab in patient serums were also observed. The novel platform exhibited superior specificity than Protein A/G/L based analytical methods, lower cost and higher stability than antigen or anti-idiotypic antibody based analytical methods, ensuring the evaluation of modification sites.

Improvement of chemo- and stereoselectivity for phosphorothioate oligonucleotides in capillary electrophoresis by addition of cyclodextrins.

Phosphorothioate (PS) modification is one of the most widely used oligonucleotide chemical alterations in the oligonucleotide backbone. It has proven to be crucial in the field of therapeutic oligonucleotides regarding the optimization of their physicochemical and biological properties. In this study, a capillary electrophoresis (CE) method with an acidic background electrolyte (BGE) containing a combination of ß- and γ-cyclodextrins derivatives as chiral selectors is proposed for the diastereomeric separation of 5-mer oligonucleotides containing 0, 1, 2, or 3 phosphorothioate linkages (5´-TCGTG-3´). The effects of the BGE pH, organic modifier addition, and type of cyclodextrin (CD) on chemo- and stereoselectivity and resolution were studied. A mixture of 25 mM (2-hydroxy-3-N,N,N-trimethylamino)propyl-γ-CD and 10 mM carboxymethyl-ß-cyclodextrin in a pH 3 buffer was found to be the most appropriate system for the qualitative evaluation of the short oligonucleotides investigated. These phosphorothioate oligonucleotides were separated with high efficiency in less than 11 min with no capillary treatment. The suggested approach can be the basis for purity testing of this new generation of therapeutics.

Separation of phosphorothioated oligonucleotide diastereomers using multiplexed drift tube ion mobility mass spectrometry.

Hydrophilic interaction liquid chromatography (HILIC) coupled to drift tube ion mobility spectrometry (DTIMS) was used to separate diastereomers of five-unit oligonucleotides containing 0, 1, 2 or 3 phosphorothioate (PS) linkages. Multiplexed DTIMS (where ions are pulsed into the drift tube according to a pre-encoded sequence) and post-acquisition processing using an innovative demultiplexing tool were investigated. The electric field inside the drift tube was optimized to achieve the highest resolving power. The entrance voltage providing the best two-peak resolution was -1000V with 3-bit multiplexing. Under optimized conditions, the eight diastereomers of an oligonucleotide with three PS linkages (5'-TC∗G∗T∗G-3') could be separated unambiguously. Indeed, those diastereomers differed in their collision cross section (CCS) values. The minimal CCS values difference between two adjacent diastereomers was 0.9% with maximal RSD on CCS values of 0.3%. The use of multiplexed ion mobility and the novel high-resolution demultiplexing tool represents a real breakthrough for resolution enhancement of diastereomers in linear DTIMS.

Comparison of Three Complementary Analytical Techniques for the Evaluation of the Biosimilar Comparability of a Monoclonal Antibody and an Fc-Fusion Protein.

In this work, a monoclonal antibody, adalimumab, and an Fc-fusion protein, etanercept, were studied and compared to one of their biosimilars. Samples submitted to stress conditions (agitation and high temperature) were used for method development. The developed methods were also applied to samples reduced by beta-mercaptoethanol to evaluate their capability to distinguish the expected species. Capillary gel electrophoresis (CGE), reversed-phase liquid chromatography (RPLC), and size-exclusion chromatography (SEC) methods coupled with UV detection were used to analyze the biopharmaceuticals. Their complementarity was investigated. For further molecular weight determination, SEC-multi angle light scattering and RPLC-quadrupole time-of-flight were occasionally used. For adalimumab, a larger amount of fragments and aggregates was observed in the biosimilar compared with the reference product. For etanercept, more related species were found in the reference product. Those three separation techniques showed good complementarity. Indeed, RPLC enabled the separation of hydrophilic and hydrophobic degradation products. CGE provided good selectivity for several adalimumab fragments, and SEC was useful for the analysis of aggregates and certain fragments that cannot be separated by the other approaches. Moreover, those formulations were submitted to mild stress conditions (30°C, 300 rpm for 4 h) that mimic shipping conditions. No additional peak was found under these conditions for the two studied biopharmaceuticals.

Analytical techniques currently used in the pharmaceutical industry for the quality control of RNA-based therapeutics and ongoing developments.

The number of RNA-based therapeutics has significantly grown in number on the market over the last 20 years. This number is expected to further increase in the coming years as many RNA therapeutics are being tested in late clinical trials stages. The first part of this paper considers the mechanism of action, the synthesis and the potential impurities resulting from synthesis as well as the strategies used to increase RNA-based therapeutics efficacy. In the second part of this review, the tests that are usually performed in the pharmaceutical industry for the quality testing of antisense oligonucleotides (ASOs), small-interfering RNAs (siRNAs) and messenger RNAs (mRNAs) will be described. In the last part, the remaining challenges and the ongoing developments to meet them are discussed.

Development of acidic phospholipid containing immobilized artificial membrane column to predict drug-induced phospholipidosis potency.

Drug-induced phospholipidosis (DIPLD) represents a big concern for both regulatory authorities and pharmaceutical companies in drug discovery. Many researches pointed out that the negatively charged intralysosomal lipids play an important role in the formation of DIPLD. To better mimic this negatively charged lipid surface, a novel immobilized artificial membrane (IAM) column was prepared via in situ copolymerization of 12-methacryloyl n-dodecylphosphocholine (MDPC) and 12-methacryloyl n-dodecylphosphoric acid (MDPA). By introducing MDPA, the surface of the resulting monolithic column can be maintained negatively charged over a broad pH range. Scanning electron microscopy, elemental analysis and nano-HPLC experiments were carried out to characterize the physicochemical properties and chromatographic performance of the obtained monolithic IAM column. The results of ζ-potential and retention mechanism studies indicate that both hydrophobic and electrostatic interactions contribute greatly to the retention of cation analytes owing to the existence of the negatively charged MDPA under acidic conditions. To better assess the DIPLD potency of drug, the molar ratio between MDPC and MDPA in the monolithic column was carefully optimized. The results show that the poly(MDPC70PA30-co-EDMA) column has the best predictability with only two false-positives (donepezil, flecainide) in qualitative analysis of 61 drugs.

Development of zirconium modified adenosine triphosphate functionalized monolith for specific enrichment of N-glycans.

In this study, to selectively enrich N-glycans from complex biological samples, a novel Zr(IV) modified adenosine triphosphate (Zr(IV)-ATP) functionalized monolith was prepared through a facile approach. Well-defined macroporous structure was observed in the ATP functionalized monolith, which allows rapid mass transfer under low backpressure and is beneficial for the enrichment of N-glycans. After being modified with Zr(IV), the resulting Zr(IV)-ATP functionalized monolith could selectively capture N-glycans through the specific interactions between the sulfonate groups of 1-aminopyrene-3,6,8-trisulfonic acid (APTS) labeled N-glycans and Zr(IV). An APTS labeled maltooligosaccharide ladder was used to optimize the enrichment conditions for APTS labeled N-glycans, and capillary electrophoresis (CE) coupled with laser-induced fluorescence (LIF) detector was employed to evaluate the enrichment efficiency. The results show that the APTS labeled maltooligosaccharides could be enriched under the selected conditions and the signal amplify factors of the maltooligosaccharides were between 7.4 and 19.5 with RSDs for reproducibility from 4.0% to 8.3% (n = 3). Finally, the proposed method was successfully used for the enrichment and detection of N-glycans released from Ribonuclease B.

Development of histidine-tagged cyclic peptide functionalized monolithic material for the affinity purification of antibodies in biological matrices.

The rapidly increasing applications of monoclonal antibodies (mAbs) in therapy have necessitated the development of mAb production and purification technologies for both academic and industrial usage. Herein, a histidine-tagged cyclic peptide (HHHHHHGSGSGSDC*AWHLGELVWC*T, the disulfide-bonded cysteines of which are indicated by asterisks, named HT25-cyclopeptide) functionalized monolithic material was developed by the metal ion chelation-based approach. The resulting material possessed suitable affinity and peptide ligand density (13.8 mg peptide ligand per mL of material), good porosity (67.1 %), acceptable specific surface area (52.95 m2/g), and lots of macropores (4.13 µm). Moreover, excellent antibody-specific selectivity, comparable or even better binding capacity (for dried material, maximum static binding capacity and dynamic binding capacity are about 119.3 mg/g and 17.05 mg/g, respectively) for antibody compared to previously developed affinity materials, acceptable resistance to trypsin digestion, and negligible nonspecific protein adsorption, were also achieved on this novel monolithic material. Compared with the corresponding cyclic peptide-based sepharose material, milder elution conditions were employed for the HT25-cyclopeptide-based monolithic material, which could effectively prevent the aggregation and denaturation of the enriched antibodies. This novel material was then successfully applied to the affinity enrichment and purification of mAbs (including infliximab and rituximab) in different cell culture media or IgG in human serum.