Soldering in Dentistry: An Updated Technical Review.

INTRODUCTION: The need to permanently join two or more pieces of metal using heat is a frequent condition in various fields of medicine such as dentistry. Welding, brazing and soldering are permanent joining techniques between different metals that require in-depth background knowledge in order to obtain predictable results. AIM: This review examines the different methods of joining metals using heat and their fields of application. DISCUSSION: It is possible to create permanent metal joints in various phases of the creation of final products that will be used on the patient. In several cases, welds are also made directly by the manufacturer during industrial processing. In dentistry, dental laboratories perform complex welds mainly on dental prostheses and orthodontic appliances during the production process. It is also possible to obtain intraoral welding carried out by the clinician inside the patient's oral cavity. Welding can be carried out using combustible gases, electric current, infrared light and laser light through different technical procedures which must be chosen according to the specific needs and the metals to be joined. CONCLUSIONS: It is useful for the dentist and dental technician to know the different welding methods, including those carried out in the factory by the manufacturer, to better understand the physical properties and mechanical resistance of the components marketed for the construction of prostheses and orthodontic appliances. The enormous variety of conditions in which those who practice welding can find themselves therefore presupposes in-depth knowledge in this field in order to apply the most suitable technique.

Filter Masks during the Second Phase of SARS-CoV-2: Study on Population.

During the SARS-CoV-2 pandemic, the most common countermeasure are the use of masks, which are supposed to filter inhaled and exhaled air to reduce the spread of the virus. The masks, which are medical devices, must be used by providing appropriate instructions for correct use. This study, which examined the population during the advanced stage of the pandemic, highlighted a substantial improvement in the management and choice of masks, even though the information disseminated to the population probably should be even more detailed and precise in order to avoid incorrect behavior that could compromise the effectiveness of these devices; in fact a high percentage of subjects had behaviors that can facilitate the spread of the virus, such as the continuous attempts to correct the incorrect positioning of the mask on the face or the need to move it because it is annoying.

Evaluation of the Oral Microcirculation in Patients Undergoing Anti COVID-19 Vaccination: A Preliminary Study.

Videocapillaroscopy allows the study of both the morphological and architectural structure of the microcirculation and its hemodynamic conditions; these parameters are directly involved in autoimmune and/or inflammatory pathologies. The purpose of this research, based on capillaroscopy, is to establish whether a patient who receives an anti-COVID 19 vaccine has any changes in their oral microcirculation. A complete capillaroscopic mapping of the oral cavity of the subjects examined was made; the investigated mucosa sites were the following: cheek, labial, chewing-gingival and back of the tongue. This study showed an increase in capillary density from the comparison between the mean labial capillary density of vaccinated patients and the reference mean capillary density value of the literature. The increase in capillary density is a sign that can be attributed to an increase in angiogenic activity. The EMA, GACVS and MHRA have reviewed the risk of thrombosis after vaccination, agreeing that the benefits outweigh the risks.

Management and use of filter masks in the "none-medical" population during the Covid-19 period.

SARS-CoV-2 has become a pandemic disease declared by the World Health Organization, consequently each nation has taken a series of actions managed by the government in order to prevent the spread of this dangerous virus. The most common countermeasure is the use of a mask that should cover the mouth and nose to filter the inhaled and exhaled air. Those masks are medical devices that should be handled properly; unfortunately in our study, observation of the population during the so-called "phase 2″ has very often shown an inappropriate use of any type of mask which reduces its effectiveness. The correct dissemination of adequate information on how to use the mask and the strict control by the government not only on staying on the street wearing masks but above all on how they should be worn, could have further reduced the spread of Covid-19.

Alternative Methods of Sterilization in Dental Practices Against COVID-19.

SARS-CoV-2, and several other microorganisms, may be present in nasopharyngeal and salivary secretions in patients treated in dental practices, so an appropriate clinical behavior is required in order to avoid the dangerous spread of infections. COVID-19 could also be spread when patients touches a contaminated surface with infected droplets and then touch their nose, mouth, or eyes. It is time to consider a dental practice quite similar to a hospital surgery room, where particular attention should be addressed to problems related to the spreading of infections due to air and surface contamination. The effectiveness of conventional cleaning and disinfection procedures may be limited by several factors; first of all, human operator dependence seems to be the weak aspect of all procedures. The improvement of these conventional methods requires the modification of human behavior, which is difficult to achieve and sustain. As alternative sterilization methods, there are some that do not depend on the operator, because they are based on devices that perform the entire procedure on their own, with minimal human intervention. In conclusion, continued efforts to improve the traditional manual disinfection of surfaces are needed, so dentists should consider combining the use of proper disinfectants and no-touch decontamination technologies to improve sterilization procedures.

Permanence of Modifications in Oral Microcirculation in Ex-Smokers.

BACKGROUND The aim of this study was to assess the long-term effects of smoking and to investigate the permanence of this damage to the oral microcirculation. MATERIAL AND METHODS We recruited 75 patients and divided them into 3 groups: group 1 was composed of 25 healthy non-smokers, group 2 was composed of 25 healthy current smokers, and group 3 was composed of 25 healthy ex-smokers. Video-capillaroscopic examination was performed on all patients. The video-capillaroscopic investigation was performed on patients in sitting position, always with the same light source, at the same room temperature (23°C), in the morning, with the same operator (GAS), and was repeated many times for every area under investigation. An enlargement of 200× allowed us to explore point-by-point all the morpho-structural characteristics of the capillaroscopic field. For non-parametric data, we evaluated the visibility of the loops and their position in relation to the surface of the mucosa. The evaluated parametric data were length of capillary loop, diameter of the loop, capillary tortuosity, and capillary density. RESULTS Our study clearly shows there was no remission of vascular damage, even 13 years after smoking cessation. CONCLUSIONS Our research shows that that the effects of smoking are still visible in ex-smokers, even at 13 years after cessation and also that ex-smokers are still subject to the risk of oral pathologies in the interval of time that we considered.

Conservative Surgical Treatment of Bisphosphonate-Related Osteonecrosis of the Jaw with Er,Cr:YSGG Laser and Platelet-Rich Plasma: A Longitudinal Study.

INTRODUCTION: The management of bisphosphonate-related osteonecrosis of the jaw (BRONJ), with no evidence-based guidelines, remains controversial. We aimed to evaluate the efficiency of a conservative surgical treatment combining Er,Cr:YSGG laser and platelet-rich plasma (PRP) for the treatment of BRONJ in cancer patients. METHODS: We performed a longitudinal cohort study. Inclusion criteria were (1) age ≥ 18 years; (2) cancer diagnosis; (3) treatment with NBP because of the underlying cancer. RESULTS: We consecutively recruited ten patients diagnosed with BRONJ in stage I or II. These patients underwent a surgical laser-assisted therapy together with autologous PRP. At the latest follow-up at 12 months, clinical improvement was observed in eight patients. Registration Number is IRCT20180329039159N1. CONCLUSION: We could successfully manage the BRONJ utilizing this combined protocol to heal the 30% of surgically treated sites and to improve the 50% of patients' lesions clinically. Our findings suggest that a surgical approach combined with Er,Cr:YSGG laser and PRP benefit cancer patients with general health issues.

Evaluation of marginal leakage after mechanical fatigue cycling of composite inlays luted with different cements.

This in vitro study evaluated the marginal microleakage of composite inlays luted with 3 different cement systems. The null hypothesis was that the luting materials would not influence dye penetration, showing the same degree of microleakage. Thirty-six sound molars were selected, mesio-occlusodistal cavities were prepared, and the teeth were randomly divided into 3 groups (n = 12). Composite resin inlay restorations were made and cemented using a dual-curing resin cement (Calibra), a light-curing flowable composite (Charisma Flow), or a self-adhesive resin cement (RelyX Unicem). The restored teeth were subjected to fatigue cycles and immersed in 0.5% basic fuchsin dye for 24 hours. Two orthogonal cuts were made to enable evaluation of dye penetration at the cervical and occlusal margins. The sections were evaluated with a 4-point scale ranging from 0 (no penetration) to 3 (penetration up to the cavity floor [occlusal margins] or axial wall [cervical margins]). The Calibra and Charisma Flow groups showed greater microleakage, notably at the cervical margins, whereas RelyX Unicem specimens showed the least dye penetration. Significant differences were found between the Calibra and Charisma Flow groups and between the Charisma Flow and RelyX Unicem groups (P < 0.05). No statistically significant differences were detected between the Calibra and RelyX Unicem groups. The microleakage associated with the flowable composite was significantly greater than that associated with both resin cements, results that discourage its use for luting of Class II composite inlays.

Assessment of root canal enlargement using Mtwo and BioRace rotary files.

OBJECTIVE: To evaluate root canal enlargement following mechanical shaping using 2 nickel titanium rotary systems. MATERIAL AND METHODS: Forty single-rooted teeth were immersed in resin and sectioned perpendicular to the long axis at 4, 8, and 12 mm from the apex. Digital capture of sections was performed before and after canal instrumentation using Mtwo and BioRace instruments. The area increase of endodontic space was calculated by subtraction. RESULTS: The use of both instruments has allowed the removal of great amounts of dentin from the canal walls, even when the endodontic morphology is characterized by awkwardness to reach recesses. CONCLUSIONS: Both procedures seem to be valid and no differences were found between Mtwo and BioRaCe considering the amount of dentin removed at different distances from the apex.

Xerostomia induced by radiotherapy: an overview of the physiopathology, clinical evidence, and management of the oral damage.

BACKGROUND: The irradiation of head and neck cancer (HNC) often causes damage to the salivary glands. The resulting salivary gland hypofunction and xerostomia seriously reduce the patient's quality of life. PURPOSE: To analyze the literature of actual management strategies for radiation-induced hypofunction and xerostomia in HNC patients. METHODS: MEDLINE/PubMed and the Cochrane Library databases were electronically evaluated for articles published from January 1, 1970, to June 30, 2013. Two reviewers independently screened and included papers according to the predefined selection criteria. RESULTS: Sixty-one articles met the inclusion criteria. The systematic review of the literature suggests that the most suitable methods for managing the clinical and pathophysiological consequences of HNC radiotherapy might be the pharmacological approach, for example, through the use of cholinergic agonists when residual secretory capacity is still present, and the use of salivary substitutes. In addition, a modified diet and the patient's motivation to enhance oral hygiene can lead to a significant improvement. CONCLUSION: Radiation-induced xerostomia could be considered a multifactorial disease. It could depend on the type of cancer treatment and the cumulative radiation dose to the gland tissue. A preventive approach and the correct treatment of the particular radiotherapeutic patient can help to improve the condition of xerostomia.

System B, Endo-Twinn and E-Fill. True temperatures inside the canal.

BACKGROUND: The aim of this study is to verify the variations of the temperature inside the root canal with three different gutta-percha heating systems. MATERIALS AND METHODS: A split-tooth model was built with a lateral groove at 3.5-mm from working length (WL) in order to insert a Chromel-Alumel K-type thermocouple placed in contact with gutta-percha. The thermocouple was connected to a digital thermometer. Sixty obturations were made with medium gutta-percha points. For 20 specimens the System B was used with the Buchanan fine plugger and the temperature was set at 200°C; for other 20 specimens the Endo-Twinn with a fine plugger was used and for the last 20 specimens we used the E-Fill with a 40.04 plugger. All pluggers were pushed to 3.5 mm from WL so that the tips were in contact to the probe. RESULTS: The analysis of 60 samples showed the highest temperature average using the System B after 10 seconds (86.85°C), after 15 seconds (94.9°C), after 20 seconds (100.4°C) and after 25 seconds (104.5°C). The Endo-Twinn average values are similar to System-B ones. The E-Fill average values are lower (69.9°C) than the other two systems evaluated only after 10 seconds due to limited working time. The temperatures average obtained using different systems of warm vertical compaction are lower than what was declared by the producing companies. CONCLUSION: Time is one the most important parameters to consider using these systems. Temperatures reached from the System B and Endo-Twinn after 25 seconds; however, seem to be sufficient to ensure an optimal adaptation of the gutta-percha in the anatomical complexity of root canals. The temperatures obtained from the E-Fill, only after 10 seconds, instead seems to be insufficient to assure the rheological characteristics of gutta-percha.

Current dental adhesives systems. A narrative review.

Adhesive dentistry is based on the development of materials which establish an effective bond with the tooth tissues. In this context, adhesive systems have attracted considerable research interest in recent years. Successful adhesive bonding depends on the chemistry of the adhesive, on appropriate clinical handling of the material as well as on the knowledge of the morphological changes caused on dental tissue by different bonding procedures. This paper outlines the status of contemporary adhesive systems, with particular emphasis on chemical characteristics and mode of interaction of the adhesives with enamel and dentinal tissues. Dental adhesives are used for several clinical applications and they can be classified based on the clinical regimen in "etch-and-rinse adhesives" and "self-etch adhesives". Other important considerations concern the different anatomical characteristics of enamel and dentine which are involved in the bonding procedures that have also implications for the technique used as well as for the quality of the bond. Etch-and-rinse adhesive systems generally perform better on enamel than self-etching systems which may be more suitable for bonding to dentine. In order to avoid a possible loss of the restoration, secondary caries or pulp damage due to bacteria penetration or due to cytotoxicity effects of eluted adhesive components, careful consideration of several factors is essential in selecting the suitable bonding procedure and adhesive system for the individual patient situation.

Innovations in endodontic filling materials: guttapercha vs Resilon.

One of the goals of endodontic treatment is to achieve a complete, tridimensional, hermetic sealing of the root canal system to prevent the entry of microorganisms or their products through both the coronal and apical pathways. Gutta-percha is the most widely used material for root canal filling and despite its numerous properties, such as biocompatibility and thermoplasticity, it has however an important limit: the lack of adhesion to the canal walls. Attempts to address this problem have been made over the years by using endodontic cements capable of bonding to canal dentine but their tendency to resorption in time can compromise the quality of treatment. The first step towards a real adhesive endodontic filling(4) is rather recent; in fact, it goes back to 2003 when, on the occasion of the American Dental Association (ADA) Annual Session, Resilon Research LLC introduced a new canal filling adhesive system based on a thermoplastic synthetic resin material called Resilon™. The real innovation of this system is its capacity of creating a core made of Resilon™ bonded to the cement which adheres to dentine walls previously conditioned with a self-etching primer(4) so no changes in the techniques of canal preparation are required. The aim of this study was to evaluate the capacity of two filling materials (gutta-percha and Resilon) to adapt to the canal anatomy, especially on the apical third, using the continuous wave of condensation technique. Our data suggest that in the third apical the gutta-percha best shows rheological properties that are as important as the bond capability.

In vitro evaluation of the antibacterial activity of cured dentin/enamel adhesive incorporating the antimicrobial agent MDPB.

The aim of this study was to investigate in vitro the antibacterial effect of a dentin/enamel adhesive containing MDPB (Clearfil Protect Bond) after curing and to compare it with an adhesive not containing MDPB (Clearfil SE Bond). The antibacterial effect of the cured adhesives was tested on Enterococcus faecalis by the evaluation of growth inhibition in a 48-h microplate direct contact test (DCT). The presence of antibacterial activity due to soluble components was also investigated by an agar diffusion test (ADT) performed with the adhesives cured on the surface of dentin disks. In the DCT, both the tested materials showed complete inhibition of bacterial growth until the 7-h reading, regardless of whether direct contact with the bacterial inoculum was continued or limited to 1 h. Stationary growth phase turbidity levels were observed at 24 or 48-h incubation. The ADT produced no inhibition areas around the dentin disks. Both adhesives tested in vitro under conditions simulating those encountered in the restorative treatment of dental caries were equally able to delay bacterial growth demonstrating a similar bacteriostatic effect. As suggested by both the DCT and the ADT, the antibacterial effect of the two adhesives depends on direct contact and does not seem to be related to the diffusion of soluble components.

Ultrasound effects after post space preparation: An SEM study.

The aim of this study was to evaluate the effect of ultrasonic treatment on occlusion of dentine tubules in root canal walls after post space preparation in endodontically treated teeth. Twenty-four premolars were instrumented and filled using warm vertical condensation; after post space preparation, they were divided into two groups. The control group was treated using the etching procedure. The experiment samples were treated with EDTA irrigation and ultrasound activation for 30 s before the etching procedure. The roots were divided and the canal walls were examined under SEM at 1000x magnification. The debris and open tubule marks were observed at 2, 6, and 10 mm levels using a three-step scale and the differences in marks among the groups were tested for statistical significance. The following were observed: (a) A decrease in debris and open tubule marks in the samples treated with ultrasounds and the control group (p < 0.05), (b) no significant differences between the three levels of post space in debris and open tubule marks in the experiment samples, and (c) significant differences between the apical and coronal levels in debris and open tubule marks in the control group.

In vitro antibacterial activity of endodontic sealers.

OBJECTIVES: To evaluate the antibacterial activity of four endodontic sealers: one epoxy resin sealer (AH Plus), two zinc oxide eugenol (ZOE)-based sealers (Endomèthasone, Pulp Canal Sealer), and one sealer containing both ZOE and orthophenilphenol (Vcanalare). METHODS: A direct contact test (DCT) was performed. A 10 microl suspension of Enterococcus faecalis was placed on the test material 20 min, 24 h and 7 days after mixing. Bacteria were allowed to directly contact the sealers for 1h at 37 degrees C. Bacterial growth was then spectrophotometrically measured every 30 min for 7 h, and again after 24 h as well. RESULTS: All freshly mixed sealers showed complete inhibition of bacterial growth. Similar results were obtained with the 24-h-old samples, with the exception of AH Plus. Vcanalare was the only sealer still inhibiting bacterial growth 7 days after mixing. CONCLUSIONS: The antimicrobial activity of the tested sealers depends on the time interval between mixing and testing. All sealers exhibit bactericidal effect when freshly mixed, but only Vcanalare extended this effect until 7 days after setting.

Surface debris of canal walls after post space preparation in endodontically treated teeth: a scanning electron microscopic study.

PURPOSE: To evaluate surface cleanliness of root canal walls along post space after endodontic treatment using 2 different irrigant regimens, obturation techniques, and post space preparation for adhesive bonding. STUDY DESIGN: Forty teeth, divided into 4 groups, were instrumented, using Ni-Ti rotary files, irrigated with NaOCl or NaOCl+EDTA and obturated with cold lateral condensation (CLC) or warm vertical condensation (WVC) of gutta-percha. After post space preparation, etching, and washing procedure, canal walls were observed using a scanning electron microscope (SEM). Amount of debris, smear layer, sealer/gutta-percha remnants, and visibility of open tubules were rated. RESULTS: Higher amounts of rough debris, large sealer/gutta-percha remnants, thick smear layer, and no visibility of tubule orifices were recorded in all the groups at apical level of post space. At middle and coronal levels areas of clean dentin, alternating with areas covered by thin smear layer, smaller debris, gutta-percha remnants, and orifices of tubules partially or totally occluded by plugs were frequently observed. CONCLUSIONS: After endodontic treatment, obturation, and post space preparation SEM analysis of canal walls along post space shows large areas (covered by smear layer, debris, and sealer/gutta-percha remnants) not available for adhesive bonding and resin cementation of fiber posts.