Porous Coordination Polymer MOF-808 as an Effective Catalyst to Enhance Sustainable Chemical Processes.

The improvement of sustainable chemical processes plays a pivotal role in safe environmental and societal development, for example, by reducing the use of hazardous substances, preventing chemical waste, and improving the efficiency of chemical reactions to obtain added-value compounds. In this context, the porous coordination polymer MOF-808 (MOF, metal-organic framework) was prepared by a straightforward method in water, at room temperature, and was unequivocally characterized by powder X-ray diffraction, vibrational spectroscopy, thermogravimetric analysis, and scanning electron microscopy. MOF-808 material was applied for the first time as catalysts in ring-opening aminolysis reactions of epoxides. It demonstrated high activity and selectivity for reactions of styrene oxide and cyclohexene oxide with aniline, using a very low amount of an eco-sustainable solvent (0.5 mL of EtOH), at 70 °C. Moreover, MOF-808 demonstrated high stability in the catalytic reaction conditions applied, and a notable reuse capacity of up to 20 consecutive reaction cycles, without significant variation in its catalytic performance. In fact, this Zr-based porous coordination polymer prepared by environment-friendly conditions proved to be a novel efficient heterogeneous catalyst, promoting the ring-opening reaction of epoxides under more sustainable conditions, and using a very low amount of catalyst.

MOF-808 as an Efficient Catalyst for Valorization of Biodiesel Waste Production: Glycerol Acetalization.

Glycerol is the main residue in the biodiesel production industry; therefore, their valorization is crucial. The acetalization of glycerol toward fuel additives such as solketal (2,2-dimethyl-1,3-dioxolan-4-methanol) is of high interest, promoting circular economy since it can be added to biodiesel or even fossil diesel to improve their quality and efficiency. Straightforward-prepared metal-organic framework (MOF) materials of the MOF-808 family were applied to the valorization of glycerol for the first time. In particular, MOF-808(Hf) was revealed to be an effective heterogeneous catalyst to produce solketal under moderate conditions: a small amount of the MOF material (only 4 wt% of glycerol), a 1:6 ratio of glycerol/acetone, and a temperature of 333 K. The high efficiency of MOF-808(Hf) was associated with the high amount of acid centers present in its structure. Furthermore, its structural characteristics, such as window opening cavity size and pore diameters, were shown to be ideal for reusing this material for at least ten consecutive reaction cycles without losing activity (conversion > 90% and selectivity > 98%). Remarkably, it was not necessary to wash or activate the MOF-808(Hf) catalyst between cycles (no pore blockage occurred), and it maintained structural integrity after ten cycles, confirming its ability to be a sustainable heterogeneous catalyst for glycerol valorization.

Peripheral site modification in a family of dinuclear [Dy2(hynad)2-6(NO3)0-6(sol)0-2]0/2- single-molecule magnets bearing a {Dy2(µ-OR)2}4+ diamond-shaped core and exhibiting dissimilar magnetic dynamics.

The first use of the organic chelate N-hydroxy-1,8-naphthalimide (hynadH) in DyIII chemistry has unveiled access to a synthetic 'playground' composed of four new dinuclear complexes, all of which possess the same planar {Dy2(µ-OR)2}4+ diamond-shaped core, resulting from the bridging and chelating capacity of the hynad- groups. The structural stability of the central {Dy2} core has allowed for the modulation of the peripheral coordination sites of the metal ions, and specifically the NO3-/hynad- ratio of capping groups, thus affording the compounds [Dy2(hynad)2(NO3)4(DMF)2] (1), (Me4N)2[Dy2(hynad)2(NO3)6] (2), [Dy2(hynad)4(NO3)2(H2O)2] (3), and [Dy2(hynad)6(H2O)2] (4). Because of the chemical and structural modifications in the series 1-4, the DyIII coordination polyhedra are also dissimilar, comprising the muffin (1 and 3), tetradecahedral (2), and spherical tricapped trigonal prismatic (4) geometries. Complexes 1, 2, and 4 exhibit a ferromagnetic response at low temperatures, while 3 is antiferromagnetically coupled. All compounds exhibit out-of-phase (χ''M) ac signals as a function of ac frequency and temperature, thus behaving as single-molecule magnets (SMMs), in the absence or presence of applied dc fields. Interestingly, the hynad--rich and nitrato-free complex 4, demonstrates the largest energy barrier (Ueff = 69.62(1) K) for the magnetization reversal which is attributed to the presence of the two axial triangular faces of the spherical tricapped trigonal prism by the negatively charged O-atoms of the hynad- ligands.

Slow Magnetization Relaxation in a Family of Triangular {CoIII 2 LnIII } Clusters: The Effect of Diamagnetic CoIII Ions on the LnIII Magnetic Dynamics.

The first use of the Schiff base chelate N-naphthalidene-o-aminophenol (naphH2 ) in Co/Ln chemistry has afforded a family of isostructural [CoIII 2 LnIII (OMe)2 (naph)2 (O2 CMe)3 (MeOH)2 ] (Ln=Tb, Dy and Er) complexes, revealing a rare {CoIII 2 Ln(µ3 -OMe)}8+ triangular core composed of two diamagnetic CoIII ions and a 4f-ion with slightly distorted square antiprismatic geometry. Alternating current (ac) magnetic susceptibility studies revealed that {Co2 Dy}, and its magnetic diluted analogue {Co2 Dy0.05 Y0.95 }, behave as mononuclear single-molecule magnets (SMMs) with similar energy barriers for the magnetization reversal, Ueff , of ~85-90 K. SMM properties were also detected for {Co2 Er}, with the compound exhibiting a Ueff of 18.7 K under an applied magnetic field of 800 Oe. To interpret the experimental magnetic results, ab initio CASSCF/RASSI-SO and DFT calculations were performed as a means of exploring the single-ion characteristics of LnIII ions and comprehend the role of the diamagnetic CoIII ions in the magnetization relaxation of the three heterometallic compounds.

Effective Combination of the Metal Centers in MOF-Based Materials toward Sustainable Oxidation Catalysts.

A successful encapsulation of Keggin-type polyoxomolybdate (H3[PMo12O40], PMo12) into metal-organic framework (MOF) materials with an identical framework but distinct metal centers (ZIF-8 with Zn2+ and ZIF-67 with Co2+) was accomplished by a straightforward room-temperature procedure. The presence of Zn2+ in the composite material PMo12@ZIF-8 instead of Co2+ in PMo12@ZIF-67 caused a remarkable increase in the catalytic activity that achieved a total oxidative desulfurization of a multicomponent model diesel under moderate and friendly conditions (oxidant: H2O2 and solvent: ionic liquid, IL). Interestingly, the parent ZIF-8-based composite with the Keggin-type polyoxotungstate (H3[PW12O40], PW12), PW12@ZIF-8, did not show the relevant catalytic activity. The ZIF-type supports present an appropriate framework to accommodate active polyoxometalates (POMs) into their cavities without leaching, but the nature of the metallic center from the POM and the metal present in the ZIF framework were vital for the catalytic performance of the composite materials.

A family of mono-, di-, and tetranuclear DyIII complexes bearing the ligand 2,6-diacetylpyridine bis(picolinoylhydrazone) and exhibiting slow relaxation of magnetization.

The systematic investigation of the general reaction scheme DyIII/X-/LH2, where X- = Cl-, CF3SO3-, ClO4-, MeCO2-, and LH2 is the pocket-type ligand 2,6-diacetylpyridine bis(picolinoylhydrazone), resulting from the condensation of 2,6-diacetylpyridine with picolinic acid hydrazide, has led to a new family of mono-, di-, and tetranuclear metal complexes of the formulae [DyCl2(LH2)(MeOH)]Cl (1), [Dy2(O3SCF3)2(LH)2(MeOH)1.42(H2O)0.58](O3SCF3)2 (2), [Dy2(LH)2(MeOH)2(H2O)2](ClO4)4 (3), and [Dy4(OH)2(O2CMe)6(L)2] (4), respectively. The organic chelate undergoes metal-assisted amide-iminol tautomerism and adopts the neutral zwitterionic, and single- and double-deprotonated forms, respectively, upon coordination with the metal center(s). Interestingly, the different forms of the ligand LH2/LH-/L2- act independently as penta-, hexa-, and heptadentate, either as single-chelating or chelating and bridging, thus yielding new DyIII compounds of various nuclearities and different magnetic properties. All complexes 1-4 exhibit frequency-dependent, out-of-phase (χ''M) tails of signals in zero external dc field, characteristic of the onset of quantum tunnelling of magnetization. Attempts to suppress the tunnelling through the application of an external dc field were mostly successful in the case of complex 1, where entirely visible peaks of χ''M have been observed and rendered possible the fit of the data to the Arrhenius equation, thus yielding the parameters: Ueff = 10.9(1) K and τ0 = 1.9(1) × 10-6 s, where Ueff is the effective energy barrier for the magnetization reversal and τ0 is the pre-exponential factor. The combined results demonstrate the ability of pyridyl-bis(acylhydrazone) ligands to yield chemically, structurally, and magnetically interesting compounds through their rich interconversion between various amide-iminol resonance forms.

Unveiling the structural transformations of the PW11Co@ZIF-67 nanocomposite induced by thermal treatment.

A guest@host POM@ZIF nanocomposite-PW11Co@ZIF-67-has been synthesized using an in situ strategy. This new nanocomposite exhibits (i) individually ZIF-67-cage-confined POM units, (ii) structural defects in the ZIF-67 host induced by the POM, and (iii) charge transfer from the ZIF-67 to the confined POM. In addition, it has served as a template to produce a set of derived samples by applying thermal treatment at various temperatures (200, 400, 500, 600, and 950 °C) under a N2 flow. We have used multiple characterization techniques, ICP-OES, CHNS analysis, XPS, ATR-IR, PXRD, Raman spectroscopy, N2/CO2 adsorption analysis, CV, and TEM/EDS, to fully assess the thermally-induced variation tendencies. The first two derivatives-D200 and D400-show the same nanoarrangement as the PW11Co@ZIF-67 precursor, although with incipient signs of both POM and ZIF-67 structural decompositions. The following samples-D500, D600, and D950-exhibit a carbonaceous nature consisting of C-embedded compositionally complex nanoparticles that involve Co and W present as diverse species, metallic/oxide/phosphate/phosphide. D500 presents the best intrinsic electrochemistry, probably due to the high proportion of pyridinic N moieties doping its C matrix combined with small-sized and highly dispersed Co-enriched nanoparticles. This study focuses on the need for a thorough physicochemical characterization of this class of highly nanostructured materials with a view to exploring their application in electrocatalysis.

Ionic Liquid-Based Polyoxometalate Incorporated at ZIF-8: A Sustainable Catalyst to Combine Desulfurization and Denitrogenation Processes.

An effective and sustainable process capable of simultaneously execute desulfurization and denitrogenation of fuels is in fact an actual necessity in the refinery industry. The key to achieve this goal is the parallel oxidation of sulfur and nitrogen compounds present in fuels, which is only achieved by an active and recovered catalyst. A novel heterogeneous catalyst was successfully prepared by the encapsulation of an imidazolium-based polyoxometalate (POM) into a ZIF-8 framework ([BMIM]PMo12@ZIF-8). This composite material revealed exceptional catalytic efficiency to concurrently proceed with the oxidative desulfurization and denitrogenation of a multicomponent model fuel containing various sulfur and nitrogen compounds. A complete removal of all these compounds was achieved after only one hour and the catalyst system was able to be reused for ten consecutive cycles without loss of efficiency. In fact, an ionic liquid POM was incorporated in the ZIF-8 for the first time, and this composite compound was originally applied as a catalyst for simultaneous oxidative desulfurization and denitrogenation processes.

Membrane-Supported Layered Coordination Polymer as an Advanced Sustainable Catalyst for Desulfurization.

The application of a catalytic membrane in the oxidative desulfurization of a multicomponent model diesel formed by most refractory sulfur compounds present in fuel is reported here for the first time. The catalytic membrane was prepared by the impregnation of the active lamellar [Gd(H4nmp)(H2O)2]Cl·2H2O (UAV-59) coordination polymer (CP) into a polymethyl methacrylate (PMMA, acrylic glass) supporting membrane. The use of the catalytic membrane in the liquid-liquid system instead of a powder catalyst arises as an enormous advantage associated with the facility of catalyst handling while avoiding catalyst mass loss. The optimization of various parameters allowed to achieve a near complete desulfurization after 3 h under sustainable conditions, i.e., using an aqueous H2O2 as oxidant and an ionic liquid as extraction solvent ([BMIM]PF6, 1:0.5 ratio diesel:[BMIM]PF6). The performance of the catalytic membrane and of the powdered UAV-59 catalyst was comparable, with the advantage that the former could be recycled successfully for a higher number of desulfurization cycles without the need of washing and drying procedures between reaction cycles, turning the catalytic membrane process more cost-efficient and suitable for future industrial application.

Multidimensional Ln-Aminophthalate Photoluminescent Coordination Polymers.

The development of straightforward reproducible methods for the preparation of new photoluminescent coordination polymers (CPs) is an important goal in luminescence and chemical sensing fields. Isophthalic acid derivatives have been reported for a wide range of applications, and in addition to their relatively low cost, have encouraged its use in the preparation of novel lanthanide-based coordination polymers (LnCPs). Considering that the photoluminescent properties of these CPs are highly dependent on the existence of water molecules in the crystal structure, our research efforts are now focused on the preparation of CP with the lowest water content possible, while considering a green chemistry approach. One- and two-dimensional (1D and 2D) LnCPs were prepared from 5-aminoisophthalic acid and Sm3+/Tb3+ using hydrothermal and/or microwave-assisted synthesis. The unprecedented LnCPs were characterized by single-crystal X-ray diffraction (SCRXD), powder X-ray diffraction (PXRD), Fourier transform infrared (FT-IR) spectroscopy and scanning electron microscopy (SEM), and their photoluminescence (PL) properties were studied in the solid state, at room temperature, using the CPs as powders and encapsulated in poly(methyl methacrylate (PMMA) films, envisaging the potential preparation of devices for sensing. The materials revealed interesting PL properties that depend on the dimensionality, metal ion, co-ligand used and water content.

Impact of Ionic Liquid Structure and Loading on Gas Sorption and Permeation for ZIF-8-Based Composites and Mixed Matrix Membranes.

Carbon dioxide (CO2) capture has become of great importance for industrial processes due to the adverse environmental effects of gas emissions. Mixed matrix membranes (MMMs) have been studied as an alternative to traditional technologies, especially due to their potential to overcome the practical limitations of conventional polymeric and inorganic membranes. In this work, the effect of using different ionic liquids (ILs) with the stable metal-organic framework (MOF) ZIF-8 was evaluated. Several IL@ZIF-8 composites and IL@ZIF-8 MMMs were prepared to improve the selective CO2 sorption and permeation over other gases such as methane (CH4) and nitrogen (N2). Different ILs and two distinct loadings were prepared to study not only the effect of IL concentration, but also the impact of the IL structure and affinity towards a specific gas mixture separation. Single gas sorption studies showed an improvement in CO2/CH4 and CO2/N2 selectivities, compared with the ones for the pristine ZIF-8, increasing with IL loading. In addition, the prepared IL@ZIF-8 MMMs showed improved CO2 selective behavior and mechanical strength with respect to ZIF-8 MMMs, with a strong dependence on the intrinsic IL CO2 selectivity. Therefore, the selection of high affinity ILs can lead to the improvement of CO2 selective separation for IL@ZIF-8 MMMs.

An Effective Hybrid Heterogeneous Catalyst to Desulfurize Diesel: Peroxotungstate@Metal-Organic Framework.

A peroxotungstate composite comprising the chromium terephthalate metal-organic framework MIL-101(Cr) and the Venturello peroxotungstate [PO4{WO(O2)2}4]3- (PW4) has been prepared by the impregnation method. The PW4@MIL-101(Cr) composite presents high catalytic efficiency for oxidative desulfurization of a multicomponent model diesel containing the most refractory sulfur compounds present in real fuels (2000 ppm of total S). The catalytic performance of this heterogeneous catalyst is similar to the corresponding homogeneous PW4 active center. Desulfurization efficiency of 99.7% was achieved after only 40 min at 70 °C using H2O2 as an oxidant and an ionic liquid as an extraction solvent ([BMIM]PF6, 2:1 model diesel/[BMIM]PF6). High recycling and reusing capacity was also found for PW4@MIL-101(Cr), maintaining its activity for consecutive oxidative desulfurization cycles. A comparison of the catalytic performance of this peroxotungstate composite with others previously reported tungstate@MIL-101(Cr) catalysts indicates that the presence of active oxygen atoms from the peroxo groups promotes a higher oxidative catalytic efficiency in a shorter reaction time.

'Metal Complexes as Ligands' for the Synthesis of Coordination Polymers: A MnIII Monomer as a Building Block for the Preparation of an Unprecedented 1-D {MnIIMnIII}n Linear Chain.

A relatively unexplored synthetic route in redox-active Mn(II/III) coordination chemistry has been employed toward the preparation of a new mixed-valence MnII/III 1-D linear chain from the reaction of [MnIII(sacb)2]- precursor with a MnII source, where sacbH2 is the Schiff base ligand N-salicylidene-2-amino-5-chlorobenzoic acid. The mononuclear (Pr2NH2)[MnIII(sacb)2] (1) compound was obtained in excellent yields (>85%) from the 1:2:3 reaction of Mn(O2CMe)2∙4H2O, sacbH2 and Pr2NH, respectively. In 1, the two doubly deprotonated sacb2- ligands act as Ocarboxylate,Nimine,Ophenoxide-tridentate chelates, while the second carboxylate O atom of sacb2- is dangling and H-bonded to the Pr2NH2+ countercation. Complex 1 was subsequently used as a 'ligand' to react stoichiometrically with the 'metal' Mn(NO3)2∙4H2O, thus leading to the 1-D coordination polymer {[MnIIMnIII(sacb)2(H2O)2(MeOH)2](NO3)}n (2) in good yields (~50%). The removal of Pr2NH2+ from the vicinity of the [MnIII(sacb)2]- metalloligand has rendered possible (vide infra) the coordination of the second Ocarboxylate of sacb2- to neighboring {MnII(H2O)2(MeOH)2}2+ units, and consequently the formation of the 1-D polymer 2. Direct-current (dc) magnetic susceptibility studies revealed the presence of very weak antiferromagnetic exchange interactions between alternating MnIII and MnII atoms with a coupling constant of J = -0.08 cm-1 for g = 2.00. The combined results demonstrate the potential of the 'metal complexes as ligands' approach to yield new mixed-valence Mn(II/III) coordination polymers with interesting structural motifs and physicochemical properties.

From Discrete Complexes to Metal-Organic Layered Materials: Remarkable Hydrogen Bonding Frameworks.

A series of metal-organic coordination complexes based on alkaline-earth metal centers [Mg(II), Ca(II), and Ba(II)] and the ligand 5-aminoisophthalate (aip2-) revealed notable structural diversity, both in the materials' dimensionality and in their hydrogen bonding networks: [Mg(H2O)6]∙[Mg2(Haip)(H2O)10]∙(Haip)∙3(aip)∙10(H2O) (1) and [Mg(aip)(phen)(H2O)2]∙(H2O) (2) were isolated as discrete complexes (0D); [Ca(aip)(H2O)2]∙(H2O) (3), [Ca(aip)(phen)(H2O)2]∙(phen)∙(H2O) (4), and [Ba2(aip)2(phen)2(H2O)7]∙2(phen)∙2(H2O) (5) revealed metal-organic chain (1D) structures, while the [Ba(aip)(H2O)] (6) showed a metal-organic layered (2D) arrangement. Furthermore, most of these metal-organic coordination materials revealed interesting thermal stability properties, being stable at temperatures up to 450 °C.

Subppm Amine Detection via Absorption and Luminescence Turn-On Caused by Ligand Exchange in Metal Organic Frameworks.

Luminescent metal-organic frameworks (LMOFs) are promising materials for lighting and sensing applications. Herein, exposure of the highly luminescent Zn2(bpdc)2(bpee) MOF (H2bpdc = 4,4'-biphenyldicarboxylic acid and bpee = 1,2-bipyridylethene) to subppm amine contents turns on a new absorption band unambiguously ascribed to free bpee molecules concomitant with the gradual appearance of a new photoluminescence band at shorter wavelengths. These findings combined with Fourier-transform infrared spectra, powder X-ray diffraction and thermogravimetric analysis of exposed LMOF powders confirm that bpee ligands are exchanged by amines and released inside the LMOF, triggering absorption and luminescence features which can be exploited for highly sensitive amine recognition. This principle was demonstrated in mixed matrix membranes (MMMs) prepared by a simple solvent-free method consisting of mixing Zn2(bpdc)2(bpee) with dimethylvinyl-terminated dimethylsiloxane and dimethylhydrogen siloxane. This method enabled the production of free-standing, permeable, and highly transparent MMMs which showed enormous potential and sensitivity to the detection of amines in gas phase and aqueous medium.

Influence of UiO-66(Zr) Preparation Strategies in Its Catalytic Efficiency for Desulfurization Process.

Porous metal-organic framework (MOF) materials UiO-66(Zr) obtained by solvothermal and microwave advanced synthesis (MWAS) procedures were characterized, and their catalytic efficiency was investigated for oxidative desulfurization (ODS) processes using a multicomponent model diesel containing benzothiophene and dibenzothiophene derivatives. The preparation parameters as the cooling time after oven use in the solvothermal procedure, and also the reaction time in the MWAS method seemed to play an important role in the catalytic performance of the UiO-66(Zr) material, as well as in its recycle capacity. The material prepared by the solvothermal procedure with a fast cooling time showed the best catalytic performance (desulfurization efficiency of 99.5% after 3 h). However, the application of the UiO-66(Zr) material prepared by the MWAS method (desulfurization efficiency of 96% after 3 h) conciliated a higher number of advantages, such as shorter reaction time preparation (15 min) and high catalytic activity for a higher number of reaction cycles. The UiO-66(Zr) prepared by the MWAS method was used for the first time in an oxidative desulfurization process, and according to the catalytic results obtained (high recycle capacity and stability) and shorter reaction time preparation, seems to be a promising material for industrial application.

Synthesis of Pyridyl and N-Methylpyridinium Analogues of Rosamines: Relevance of Solvent and Charge on Their Photophysical Properties.

A series of pyridyl analogues of rosamines was prepared by employing two methodologies: (i) the conventional-heating condensation of a pyridinecarboxaldehyde with 3-(diethylamino)phenol in propionic acid, and (ii) the novel ohmic-heating assisted condensation under "on water" conditions, followed by oxidation. The 4-pyridyl substituted rosamine was further converted into the N-methylpyridinium derivative through N-alkylation using methyl iodide. The influence of the position and cationization of the nitrogen atom of the pyridyl ring in the physicochemical properties of fluorophores was investigated by 1 H, 13 C, 15 N NMR spectral analysis, UV/Vis and fluorescence spectroscopy, single-crystal X-ray diffraction (4-pyridyl and N-methylpyridinium derivatives) and thermal-behavior analysis. Curiously, for ethanolic solutions of 4-pyridyl and N-methylpyridinium derivatives an extinction of color and fluorescence over time was observed. This phenomenon was further studied and the data revealed that it is the result of nucleophilic addition of ethoxide ion to the central 9-position of the xanthene. The kinetics of the process is slower for the 4-pyridyl rosamine, which emphasizes the importance of the charge in the N-methylpyridinium analogue in the reactivity of the molecule towards a nucleophile agent. This phenomenon is reversible, meaning that the compounds can be rapidly recovered by decreasing the pH, opening new avenues in the sensing applications of this class of rosamines.

Multifunctionality in Two Families of Dinuclear Lanthanide(III) Complexes with a Tridentate Schiff-Base Ligand.

The employment of N-(2-carboxyphenyl)salicylideneimine in 4f metal chemistry has led to two families of dinuclear complexes depending on the lanthanide(III) used. Representative members exhibit interesting magnetic, optical, and catalytic properties.

A hydrogen-bonded assembly of cucurbit[6]uril and [MoO2Cl2(H2O)2] with catalytic efficacy for the one-pot conversion of olefins to alkoxy products.

The reaction of the macrocyclic cavitand cucurbit[6]uril (CB[6]) and the diaqua complex [MoO2Cl2(H2O)2] in hydrochloric acid solution gave a water insoluble supramolecular compound with the general composition 2[MoO2Cl2(H2O)2]·CB[6]·xH2O·yHCl·z(CH3COCH3) (2). Single crystal X-ray diffraction (XRD) analysis revealed the presence of barrel-shape supramolecular entities, {CB[6]·10(H2O)}, aligned in layers which are shifted relative to adjacent layers to form a brick-like pattern. The CB[6]/water hydrogen-bonded entities further engage in intermolecular interactions with water, HCl and [MoO2Cl2(H2O)2] molecules to form a three-dimensional (3D) framework. Compound 2 was characterised by thermogravimetric analysis (TGA), IR and Raman vibrational spectroscopy, and 13C{1H} CP MAS NMR. The reference complex [MoO2Cl2(H2O)2]·(diglyme)2 (1) and compound 2 were studied for the oxidative catalytic conversion of olefins (cis-cyclooctene, cyclohexene and styrene) with aqueous H2O2 as oxidant. Using alcohols as solvents, 2 was employed in a one-pot two-stage strategy for converting olefins to alkoxy products, which involves oxidation (with H2O2) and acid chemistry. Mechanistic studies were carried out using different intermediates as substrates, and the type of solvent and substrate scope were investigated. The results demonstrated the ability of the CB[6]/MoVI supramolecular adduct to function as an acid-oxidation multifunctional catalyst, and its recovery and reuse via relatively simple procedures.

Heterometallic Cu/Ln cluster chemistry: ferromagnetically-coupled {Cu4Ln2} complexes exhibiting single-molecule magnetism and magnetocaloric properties.

A new family of {Cu4Ln2} (Ln = Gd, Tb and Dy) complexes bearing the gem-diol form of di-2-pyridyl ketone [(py)2CO] ligand is reported. Magnetic studies reveal the presence of predominant ferromagnetic exchange interactions between the metal ions. As a result, the hexanuclear compounds exhibit single-molecule magnetism behavior and large magnetic entropy changes, depending on the 4f-metal ion present.