Compatibility of a New Ocular Surface Dye with Disposable and Bi-Weekly Soft Contact Lenses: An Experimental Study.

Ocular surface staining for assessing corneal and conjunctival epithelium integrity is typically conducted using fluorescein, lissamine green, or rose Bengal dyes. Recently, a novel vital dye, REmark®, based on riboflavin, has been proposed for ocular surface examination. In the management of corneal and ocular surface diseases (OSD), the use of contact lenses is integral to therapeutic strategies. This study explores the compatibility of REmark® with four different types of disposable or bi-weekly soft contact lenses. Morphological variations observed under stereomicroscopy and ultraviolet (UV) ray transmittance in the visible spectrum (VIS) were evaluated at 2 and 4 h post-immersion of the contact lenses in both the original fluid and the new dye. The findings indicate no significant differences between the group treated with the original liquid and those immersed in REmark®, except for a yellow hue observed in the latter group, which dissipates after 8 h in physiological solution. This study highlights the potential of utilizing the new vital dye for ophthalmologic examinations even in the presence of applied soft contact lenses, offering a promising avenue for improved diagnostic practices and patient comfort.

Characterizing the Oligomers Distribution along the Aggregation Pathway of Amyloid Aß1-40 by NMR.

This study delves into the early aggregation process of the Aß1-40 amyloid peptide, elucidating the associated oligomers distribution. Motivated by the acknowledged role of small oligomers in the neurotoxic damage linked to Alzheimer's disease, we present an experimental protocol for preparing 26-O-acyl isoAß1-40, a modified Aß1-40 peptide facilitating rapid isomerization to the native amide form at neutral pH. This ensures seed-free solutions, minimizing experimental variability. Additionally, we demonstrate the efficacy of coupling NMR diffusion ordered spectroscopy (DOSY) with the Inverse Laplace Transform (ILT) reconstruction method, for effective characterization of early aggregation processes. This innovative approach efficiently maps oligomers distributions across a wide spectrum of initial peptide concentrations offering unique insights into the evolution of oligomers relative populations. As a proof of concept, we demonstrate the efficacy of our approach assessing the impact of Epigallocathechin gallate, a known remodeling agent of amyloid fibrils, on the oligomeric distributions of aggregated Aß1-40. The DOSY-ILT proposed approach stands as a robust and discriminating asset, providing a powerful strategy for rapidly gaining insight into potential inhibitors' impact on the aggregation process.

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions: theoretical basis.

Keratoconus is an ectatic condition characterized by gradual corneal thinning, corneal protrusion, progressive irregular astigmatism, corneal fibrosis, and visual impairment. The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages, gas-permeable rigid contact lenses, scleral lenses, implantation of intrastromal corneal ring or corneal transplants for most advanced stages. In keratoconus cases showing disease progression corneal collagen crosslinking (CXL) has been proven to be an effective, minimally invasive and safe procedure. CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation, resulting in stromal crosslinks formation. The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models, from the original Dresden protocol to the most recent developments in the technique, reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols. Finally, the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

AXL receptor as an emerging molecular target in colorectal cancer.

AXL receptor tyrosine kinase (AXL) is a receptor tyrosine kinase whose aberrant expression has recently been associated with colorectal cancer (CRC), contributing to tumor growth, epithelial-mesenchymal transition (EMT), increased invasiveness, metastatic spreading, and the development of drug resistance. In this review we summarize preclinical data, the majority of which are limited to recent years, convincingly linking the AXL receptor to CRC. These findings support the value of targeting AXL with molecules in drug discovery, offering novel and advanced therapeutic or diagnostic tools for CRC management.

Micro-CT imaging and finite element models reveal how sintering temperature affects the microstructure and strength of bioactive glass-derived scaffolds.

This study focuses on the finite element simulation and micromechanical characterization of bioactive glass-ceramic scaffolds using Computed micro Tomography ([Formula: see text]CT) imaging. The main purpose of this work is to quantify the effect of sintering temperature on the morphometry and mechanical performance of the scaffolds. In particular, the scaffolds were produced using a novel bioactive glass material (47.5B) through foam replication, applying six different sintering temperatures. Through [Formula: see text]CT imaging, detailed three-dimensional images of the scaffold's internal structure are obtained, enabling the extraction of important geometric features and how these features change with sintering temperature. A finite element model is then developed based on the [Formula: see text]CT images to simulate the fracture process under uniaxial compression loading. The model incorporates scaffold heterogeneity and material properties-also depending on sintering temperature-to capture the mechanical response, including crack initiation, propagation, and failure. Scaffolds sintered at temperatures equal to or higher than 700 [Formula: see text]C exhibit two-scale porosity, with micro and macro pores. Finite element analyses revealed that the dual porosity significantly affects fracture mechanisms, as micro-pores attract cracks and weaken strength. Interestingly, scaffolds sintered at high temperatures, the overall strength of which is higher due to greater intrinsic strength, showed lower normalized strength compared to low-temperature scaffolds. By using a combined strategy of finite element simulation and [Formula: see text]CT-based characterization, bioactive glass-ceramic scaffolds can be optimized for bone tissue engineering applications by learning more about their micromechanical characteristics and fracture response.

Molecular Characterization of the Recombinant Ig1 Axl Receptor Domain: An Intriguing Bait for Screening in Drug Discovery.

Axl receptor tyrosine kinase and its ligand Gas6 regulate several biological processes and are involved in both the onset and progression of tumor malignancies and autoimmune diseases. Based on its key role in these settings, Axl is considered a promising target for the development of molecules with therapeutic and diagnostic purposes. In this paper, we describe the molecular characterization of the recombinant Ig1 domain of Axl (Ig1 Axl) and its biochemical properties. For the first time, an exhaustive spectroscopic characterization of the recombinant protein through circular dichroism and fluorescence studies is also reported, as well as a binding analysis to its natural ligand Gas6, paving the way for the use of recombinant Ig1 Axl as a bait in drug discovery screening procedures aimed at the identification of novel and specific binders targeting the Axl receptor.

Determinants of increased nursing workload in the COVID-era: A retrospective analysis of prospectively collected data.

BACKGROUND: COVID-19 is associated with increased nursing workload, therefore a high nurse-to-patient ratio would be required. AIM: To analyse difference in nursing workload, as expressed with the Nursing Activities Score (NAS), between COVID-19 patients versus control patients without COVID-19 disease (NCOVID-19 group) in an Italian Extracorporeal Membrane Oxygenation (ECMO) centre. STUDY DESIGN: Retrospective analysis of prospectively collected data, enrolling consecutive patients admitted to a general Intensive Care Unit, between 1st May 2019 and 28th February 2021. A multivariate analysis was then performed to assess if COVID-19 disease was an independent predictor of higher NAS and to assess which other factors and procedures are independently associated with increased workload. RESULTS: We enrolled 574 patients, of which 135 (24%) were in the COVID-19 group and 439 (76%) in the NCOVID-19 group. The average NAS was higher in the COVID-19 group (79 ± 11 vs. 65 ± 15, T = -10.026; p < 0.001). Prone positioning, continuous renal replacement therapy (CRRT) and ECMO were used more frequently in the COVID-19 group. A higher fraction of patients in the COVID group showed colonization from multidrug resistant bacteria. COVID-19 group had a higher duration of mechanical ventilation and longer ICU stay. The COVID-19 diagnosis was independently associated with a higher NAS. Other independent predictors of higher NAS were the use of prone positioning and continuous renal replacement therapy (CRRT). Colonization from multidrug resistant bacteria and ECMO support were not independently associated with higher NAS. CONCLUSIONS: The higher nursing workload in COVID-19 patients is mainly due to specific procedures required to treat the most hypoxemic patients, such as prone positioning. Colonization with multidrug resistant bacteria and ECMO support were not independently associated with a higher NAS. RELEVANCE TO CLINICAL PRACTICE: Higher workload in COVID-19 patients was due to specific interventions, such as prone positioning and CRRT, with the related nursing activities, as continuous presence at patient's bed, mobilization, positioning and complex hygienic procedures.

Computational models for the simulation of the elastic and fracture properties of highly porous 3D-printed hydroxyapatite scaffolds.

Bone scaffolding is a promising approach for the treatment of critical-size bone defects. Hydroxyapatite can be used to produce highly porous scaffolds as it mimics the mineralized part of bone tissue, but its intrinsic brittleness limits its usage. Among 3D printing techniques, vat photopolymerization allows for the best printing resolution for ceramic materials. In this study, we implemented a Computed micro-Tomography based Finite Element Model of a hydroxyapatite porous scaffold fabricated by vat photopolymerization. We used the model in order to predict the elastic and fracture properties of the scaffold. From the stress-strain diagram of a simulated compression test, we computed the stiffness and the strength of the scaffolds. We found that three morphometric features substantially affect the crack pattern. In particular, the crack propagation is not only dependent on the trabecular thickness but also depends on the slenderness and orientation of the trabeculae with respect to the load. The results found in this study can be used for the design of ceramic scaffolds with heterogeneous pore distribution in order to tailor and predict the compressive strength.

Facelift: Assessment of Total Platysma Muscle Transection to Prevent the Recurrence of Platysmal Bands.

INTRODUCTION: Determining which facelift technique yields the most effective long-term rejuvenation results and ensures optimal stability over time remains a significant question in cosmetic surgery: Does the most invasive surgery lead to the best long-term outcomes? This study aims to evaluate the authors' approach using total platysma muscle transection to prevent platysma band recurrence, and to provide anatomical observations supporting and justifying their procedure. MATERIAL AND METHODS: A preliminary study in anatomical basic sciences was conducted to establish the rationale for our method. A prospective single-blind study was conducted, involving eighty patients seeking facial rejuvenation with platysmal band correction. They underwent face and neck-lift procedures with total platysma transection by the same surgeon between May 2013 and May 2016. Cosmetic outcomes were assessed using the Face and Neck-Lift Objective Photo-Numerical Assessment Scale. Scores by three blind evaluators before surgery, at 1 and 5 years postoperatively, were compared using a matched T Test (p < 0.05). RESULTS: The preliminary anatomical study revealed a consistent anastomotic system between the cervical branch of the facial nerve and the branches of the cervical plexus. Incomplete platysma section during a facelift might contribute to platysma band recurrence. The clinical study demonstrated satisfactory outcomes, with significant overall appearance improvement (p < 0.00001) and no platysma band recurrence. Complication rate was low. CONCLUSION: The authors' technique achieved satisfactory long-term results with minimal complications. However, due to the lengthy operating time and steep learning curve, it should be reserved for highly motivated patients. LEVEL OF EVIDENCE II: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Intrinsically disordered Prosystemin discloses biologically active repeat motifs.

The in-depth studies over the years on the defence barriers by tomato plants have shown that the Systemin peptide controls the response to a wealth of environmental stress agents. This multifaceted stress reaction seems to be related to the intrinsic disorder of its precursor protein, Prosystemin (ProSys). Since latest findings show that ProSys has biological functions besides Systemin sequence, here we wanted to assess if this precursor includes peptide motifs able to trigger stress-related pathways. Candidate peptides were identified in silico and synthesized to test their capacity to trigger defence responses in tomato plants against different biotic stressors. Our results demonstrated that ProSys harbours several repeat motifs which triggered plant immune reactions against pathogens and pest insects. Three of these peptides were detected by mass spectrometry in plants expressing ProSys, demonstrating their effective presence in vivo. These experimental data shed light on unrecognized functions of ProSys, mediated by multiple biologically active sequences which may partly account for the capacity of ProSys to induce defense responses to different stress agents.

Assessment of deep plane facelift in facial feminization surgery: A prospective pilot study.

Facial feminization surgery (FFS) is often the first procedure requested by patients wishing to undergo gender-affirming surgery. This study aims to evaluate the applicability and effectiveness of deep plane facelifts in FFS. The authors conducted a prospective study that included patients who requested a deep plane facelift as a standalone procedure to achieve a more feminine facial appearance as the only procedure of FFS. These patients underwent deep plane facelifts to achieve a more feminine oval face shape and increased tissue projection of the zygomatic-malar region. To assess the effectiveness of the procedure and patient satisfaction, the Face-Q scales, Face and Neck lift Objective Photo-Numerical Assessment Scale, the Satisfaction With Life Scale, and the Subjective Happiness Scale were applied preoperatively and one year after surgery. Thirty-six patients were included in the study. A statistically significant difference (p < 0.005) was observed between pre and postoperative scores. The repositioning of the malar fat pads increased the malar volume, providing a more oval overall shape of the face, which is typically feminine. No major complications were observed. Despite our encouraging results, new studies with a larger sample of patients are needed to support the benefits of the deep plane facelift as part of FFS to elevate this technique from an ancillary to a routine procedure for patients undergoing gender affirmation surgery.

Nanofat in Plastic Reconstructive, Regenerative, and Aesthetic Surgery: A Review of Advancements in Face-Focused Applications.

Nanofat is a relatively novel technique in fat grafting that has gained significant interest in the fields of regenerative medicine, aesthetic and translational research. It involves the extraction of autologous fat from a patient, which is then transformed into "nanofat", consisting of small fat particles with a diameter of less than 0.1 mm and containing high concentrations of stem cells and growth factors. This article focuses on the use of nanofat in facial rejuvenation and its potential for lipomodelling. Fat tissue is a "stem cell depot" and nanofat contains many stem cells that can differentiate into various cell types. The Lipogem technology, developed in 2013, enables the isolation of nanofat with an intact perivascular structure, utilizing the high concentration of mesenchymal stromal cells near the pericytes of the adipose vascular system. Nowadays nanofat is used primarily for cosmetic purposes particularly in rejuvenating and improving the appearance of the skin, especially the face. Indeed, it has wide applicability; it can be used to treat fine lines, wrinkles, acne scars, sun-damaged skin, scar repair, and as an alopecia treatment. However, further studies are needed to assess the long-term efficacy and safety of this technique. In conclusion, nanofat is a safe and minimally invasive option for tissue regeneration with considerable therapeutic potential. This study reviews the application and effects of nanofat in regenerative medicine and facial cosmetic surgery.

Structure-Based Design of Peptides Targeting VEGF/VEGFRs.

Vascular endothelial growth factor (VEGF) and its receptors (VEGFRs) play a main role in the regulation of angiogenesis and lymphangiogenesis. Furthermore, they are implicated in the onset of several diseases such as rheumatoid arthritis, degenerative eye conditions, tumor growth, ulcers and ischemia. Therefore, molecules able to target the VEGF and its receptors are of great pharmaceutical interest. Several types of molecules have been reported so far. In this review, we focus on the structure-based design of peptides mimicking VEGF/VEGFR binding epitopes. The binding interface of the complex has been dissected and the different regions challenged for peptide design. All these trials furnished a better understanding of the molecular recognition process and provide us with a wealth of molecules that could be optimized to be exploited for pharmaceutical applications.

Mechanical characterization of miniaturized 3D-printed hydroxyapatite parts obtained through vat photopolymerization: an experimental study.

Hydroxyapatite is one of the materials of choice for tissue engineering bone scaffolds manufacturing. Vat photopolymerization (VPP) is a promising Additive Manufacturing (AM) technology capable of producing scaffolds with high resolution micro-architecture and complex shapes. However, mechanical reliability of ceramic scaffolds can be achieved if a high fidelity printing process is obtained and if knowledge of the intrinsic mechanical properties of the constituent material is available. As the hydroxyapatite (HAP) obtained from VPP is subjected to a sintering process, the mechanical properties of the material should be assessed with specific reference to the process parameters (e.g. sintering temperature) and to the specific characteristic size of the microscopic features in the scaffolds. In order to tackle this challenge the HAP solid matrix of the scaffold was mimicked in the form of miniaturized samples suitable for ad hoc mechanical characterization, which is an unprecedented approach. To this purpose small scale HAP samples, having a simple geometry and size similar to that of the scaffolds, were produced through VPP. The samples were subjected to geometric characterization and to mechanical laboratory tests. Confocal laser scanning and Computed micro-Tomography (micro-CT) were used for geometric characterization; while, micro-bending and nanoindentation were used for mechanical testing. Micro-CT analyses have shown a highly dense material with negligible intrinsic micro-porosity. The imaging process allowed quantifying the variation of geometry with respect to the nominal size showing high accuracy of the printing process and identifying printing defects on one specific sample type, depending on the printing direction. The mechanical tests have shown that the VPP produces HAP with an elastic modulus as high as approximately 100GPa and flexural strength of approximately 100MPa. The results of this study have shown that vat photopolymerization is a promising technology capable of producing high quality HAP with reliable geometric fidelity.

Temporins: Multifunctional Peptides from Frog Skin.

Temporins are short peptides secreted by frogs from all over the world. They exert antimicrobial activity, mainly against Gram-positive bacteria, including resistant pathogens; recent studies highlight other possible applications of these peptides as anticancer or antiviral agents. This review is meant to describe the main features of temporins produced by different ranid genera. Due to the abundance of published papers, we focus on the most widely investigated peptides. We report studies on their mechanism of action and three-dimensional structure in model systems mimicking bacterial membranes or in the presence of cells. The design and the antimicrobial activity of peptide analogues is also described, with the aim of highlighting elements that are crucial to improve the bioactivity of peptides while reducing their toxicity. Finally, a short section is dedicated to the studies aimed at applying these peptides as drugs, to produce new antimicrobial materials or in other technological uses.

A Chemical Strategy for the Preparation of Multimodified Peptide Imaging Probes.

Multimodality probes appear of great interest for innovative imaging applications in disease diagnosis. Herein, we present a chemical strategy enabling site-specific double-modification and cyclization of a peptide probe exploiting native chemical ligation (NCL) and thiol-maleimide addition. The synthetic strategy is straightforward and of general applicability for the development of double-labeled peptide multimodality probes.

Anisotropic Mechanical Response of Bovine Pericardium Membrane Through Bulge Test and In-Situ Confocal-Laser Scanning.

In this work, we present a new experimental setup for the assessment of the anisotropic properties of Bovine Pericardium (BP) membranes. The chemically fixed BP samples have been subjected to a bulge test with in situ confocal laser scanning at increasing applied pressure. The high resolution topography provided by the confocal laser scanning has allowed to obtain a quantitative measure of the bulge displacement; after polynomial fitting, principal curvatures have been obtained and a degree of anisotropy (DA) has been defined as the normalized difference between the maximum and minimum principal curvatures. The experiments performed on the BP membranes have allowed us to obtain pressure-displacement data which clearly exhibit distinct principal curvatures indicating an anisotropic response. A comparison with curvatures data obtained on isotropic Nitrile Buthadiene Rubber (NBR) samples has confirmed the effectiveness of the experimental setup for this specific purpose. Numerical simulations of the bulge tests have been performed with the purpose of identifying a range of constitutive parameters which well describes the obtained range of DA on the BP membranes. The DA values have been partially validated with biaxial tests available in literature and with suitably performed uni-axial tensile tests.

Switching the N-Capping Region from all-L to all-D Amino Acids in a VEGF Mimetic Helical Peptide.

The N-capping region of an α-helix is a short N-terminal amino acid stretch that contributes to nucleate and stabilize the helical structure. In the VEGF mimetic helical peptide QK, the N-capping region was previously demonstrated to be a key factor of QK helical folding. In this paper, we explored the effect of the chiral inversion of the N-capping sequence on QK folding, performing conformational analysis in solution by circular dichroism and NMR spectroscopy. The effect of such a modification on QK stability in serum and the proliferative effect were also evaluated.

Mechanical Properties of Robocast Glass Scaffolds Assessed through Micro-CT-Based Finite Element Models.

In this study, the mechanical properties of two classes of robocast glass scaffolds are obtained through Computed micro-Tomography (micro-CT) based Finite Element Modeling (FEM) with the specific purpose to explicitly account for the geometrical defects introduced during manufacturing. Both classes demonstrate a fiber distribution along two perpendicular directions on parallel layers with a 90∘ tilting between two adjacent layers. The crack pattern identified upon compression loading is consistent with that found in experimental studies available in literature. The finite element models have demonstrated that the effect of imperfections on elastic and strength properties may be substantial, depending on the specific type of defect identified in the scaffolds. In particular, micro-porosity, fiber length interruption and fiber detaching were found as key factors. The micro-pores act as stress concentrators promoting fracture initiation and propagation, while fiber detachment reduces the scaffold properties substantially along the direction perpendicular to the fiber plane.