Enhancing untargeted metabolomics using metadata-based source annotation.

Human untargeted metabolomics studies annotate only ~10% of molecular features. We introduce reference-data-driven analysis to match metabolomics tandem mass spectrometry (MS/MS) data against metadata-annotated source data as a pseudo-MS/MS reference library. Applying this approach to food source data, we show that it increases MS/MS spectral usage 5.1-fold over conventional structural MS/MS library matches and allows empirical assessment of dietary patterns from untargeted data.

Cyclic Peroxidic Carbon Dioxide Dimer Fuels Peroxyoxalate Chemiluminescence.

Peroxyoxalate chemiluminescence is used in self-contained light sources, such as glow sticks, where oxidation of aromatic oxalate esters produces a high-energy intermediate (HEI) that excites fluorescence dyes via electron transfer chemistry, mimicking bioluminescence for efficient chemical energy-to-light conversion. The identity of the HEI and reasons for the efficiency of the peroxyoxalate reaction remain elusive. We present here unequivocal proof that the HEI of the peroxyoxalate system is a cyclic peroxidic carbon dioxide dimer, namely, 1,2-dioxetanedione. Oxalic peracids bearing a substituted phenyl group were unable to directly excite fluorescent dyes; hence, they could be ruled out as the HEI. However, base-catalyzed cyclization of these species results in bright chemiluminescence, with decay rates and chemiexcitation quantum yields that are influenced by the electronic phenylic substituent properties. Hammett (ρ = +2.2 ± 0.1) and Brønsted (ß = -1.1 ± 0.1) constants for the cyclization step preceding chemiexcitation imply that the loss of the phenolate-leaving group and intramolecular nucleophilic attack of the percarboxylate anion occur in a concerted manner, generating 1,2-dioxetanedione as the unique outcome. The presence of better leaving groups influences the reaction mechanism, favoring the chemiluminescent reaction pathway over the nonemissive formation of aryl-1,2-dioxetanones.

Workshop report: Toward the development of a human whole stool reference material for metabolomic and metagenomic gut microbiome measurements.

INTRODUCTION: To date, there has been little effort to develop standards for metabolome-based gut microbiome measurements despite the significant efforts toward standard development for DNA-based microbiome measurements. OBJECTIVES: The National Institute of Standards and Technology (NIST), The BioCollective (TBC), and the North America Branch of the International Life Sciences Institute (ILSI North America) are collaborating to extend NIST's efforts to develop a Human Whole Stool Reference Material for the purpose of method harmonization and eventual quality control. METHODS: The reference material will be rationally designed for adequate quality assurance and quality control (QA/QC) for underlying measurements in the study of the impact of diet and nutrition on functional aspects of the host gut microbiome and relationships of those functions to health. To identify which metabolites deserve priority in their value assignment, NIST, TBC, and ILSI North America jointly conducted a workshop on September 12, 2019 at the NIST campus in Gaithersburg, Maryland. The objective of the workshop was to identify metabolites for which evidence indicates relevance to health and disease and to decide on the appropriate course of action to develop a fit-for-purpose reference material. RESULTS: This document represents the consensus opinions of workshop participants and co-authors of this manuscript, and provides additional supporting information. In addition to developing general criteria for metabolite selection and a preliminary list of proposed metabolites, this paper describes some of the strengths and limitations of this initiative given the current state of microbiome research. CONCLUSIONS: Given the rapidly evolving nature of gut microbiome science and the current state of knowledge, an RM (as opposed to a CRM) measured for multiple metabolites is appropriate at this stage. As the science evolves, the RM can evolve to match the needs of the research community. Ultimately, the stool RM may exist in sequential versions. Beneficial to this evolution will be a clear line of communication between NIST and the stakeholder community to ensure alignment with current scientific understanding and community needs.

Evaluating changes to Ralstonia pickettii in high-purity water to guide selection of potential calibration materials for online water bioburden analyzers.

Online water bioburden analyzers (OWBAs) can provide real-time feedback on viable bacteria in high-purity water (HPW) systems for pharmaceutical manufacturers. To calibrate and validate OWBAs, which detect bacteria using scattered light and bacterial autofluorescence, standards are needed that mimic the characteristics of bacteria in HPW. To guide selection of potential standards, e.g., fluorescent microspheres, a relevant bacterial contaminant, Ralstonia pickettii, was characterized for size, count, viability, and autofluorescence after exposure for 24 h to HPW or a nutrient environment. The cells exposed to HPW showed smaller sizes, with lower counts and autofluorescence intensities, but similar spectral features. The cell characteristics are discussed in comparison with a set of fluorescent microspheres, considering factors relevant to OWBAs. These studies suggest that fluorescent microspheres should be relatively small (< 1 µm diameter) and dim, while covering a broad emission range from ≈ (420 to 600) nm to best mimic the representative R. pickettii.

COD removal and toxicity decrease from tannery wastewater by zinc oxide-assisted photocatalysis: a case study.

This work reports the optimization of degradation conditions and toxicity decrease in the tannery wastewater, collected in the retanning and dyeing steps. This effluent was filtered, diluted in a 1:200 proportion, and investigated as a case study on a bench scale by heterogeneous photocatalysis. These conditions were attained when the suspension, containing 1 g L-1 of ZnO and effluent, was irradiated for 4h at pH 8.0 and 30 degrees C. Physico-chemical parameters such as chemical oxygen demand (COD) decreased from 15,023 to 350 mg O2 L-1; fifth-day biochemical oxygen demand (BODs) from 4374 to 10 mg O2 L-1; total solids from 28,500 to 188 mg L-1; total organic carbon (TOC) from 4685 to 4.93 mg L-1, and turbidity from 331 to 1.15NTU after 4h of irradiation. The LC50 increase from 14.90% to 56.82% in the lethality assay of Artemia salina L. microcrustacean as well as the dissolved oxygen of 6.45mg L-1 indicated efficiency in this treatment.

Solvent cage effects: basis of a general mechanism for efficient chemiluminescence.

The induced decomposition of 1,2-dioxetanes results in the efficient formation of singlet-excited carbonyl compounds. This transformation has been assumed to involve two sequential electron-transfer steps, and the viscosity dependence of the chemiexcitation efficiency (solvent cage effect) has been considered as evidence for the occurrence of an intermolecular electron back-transfer, despite the very high chemiexcitation quantum yields observed. However, all other chemiluminescent reactions assumed to occur according to the entirely intermolecular mechanism, referred to as CIEEL, are inefficient, except for the peroxyoxalate system. Therefore, we have investigated the solvent cage effect on the singlet quantum yields in both the induced decomposition of 1,2-dioxetanes and the peroxyoxalate reaction. Analysis of the viscosity effect observed for both systems, using a collisional as well as a free-volume model, indicates a very distinct behavior, which was interpreted as the occurrence of intramolecular chemiexcitation in the induced 1,2-dioxetane decomposition. We propose a general mechanism for efficient chemiluminescence in which the required electron back-transfer and C-C bond cleavage are concerted and compete with conformational changes that compromise the chemiexcitation. This mechanism is in agreement with both experimental and theoretical data available on the induced 1,2-dioxetane decomposition as well as with the high quantum efficiency of this transformation.

Impact of processing method on recovery of bacteria from wipes used in biological surface sampling.

Environmental sampling for microbiological contaminants is a key component of hygiene monitoring and risk characterization practices utilized across diverse fields of application. However, confidence in surface sampling results, both in the field and in controlled laboratory studies, has been undermined by large variation in sampling performance results. Sources of variation include controlled parameters, such as sampling materials and processing methods, which often differ among studies, as well as random and systematic errors; however, the relative contributions of these factors remain unclear. The objective of this study was to determine the relative impacts of sample processing methods, including extraction solution and physical dissociation method (vortexing and sonication), on recovery of Gram-positive (Bacillus cereus) and Gram-negative (Burkholderia thailandensis and Escherichia coli) bacteria from directly inoculated wipes. This work showed that target organism had the largest impact on extraction efficiency and recovery precision, as measured by traditional colony counts. The physical dissociation method (PDM) had negligible impact, while the effect of the extraction solution was organism dependent. Overall, however, extraction of organisms from wipes using phosphate-buffered saline with 0.04% Tween 80 (PBST) resulted in the highest mean recovery across all three organisms. The results from this study contribute to a better understanding of the factors that influence sampling performance, which is critical to the development of efficient and reliable sampling methodologies relevant to public health and biodefense.

Parameters affecting spore recovery from wipes used in biological surface sampling.

The need for the precise and reliable collection of potential biothreat contaminants has motivated research in developing a better understanding of the variability in biological surface sampling methods. In this context, the objective of this work was to determine parameters affecting the efficiency of extracting Bacillus anthracis Sterne spores from commonly used wipe sampling materials and to describe performance using the interfacial energy concept. In addition, surface thermodynamics was applied to understand and predict surface sampling performance. Wipe materials were directly inoculated with known concentrations of B. anthracis spores and placed into extraction solutions, followed by sonication or vortexing. Experimental factors investigated included wipe material (polyester, cotton, and polyester-rayon), extraction solution (sterile deionized water [H(2)O], deionized water with 0.04% Tween 80 [H(2)O-T], phosphate-buffered saline [PBS], and PBS with 0.04% Tween 80 [PBST]), and physical dissociation method (vortexing or sonication). The most efficient extraction from wipes was observed for solutions containing the nonionic surfactant Tween 80. The increase in extraction efficiency due to surfactant addition was attributed to an attractive interfacial energy between Tween 80 and the centrifuge tube wall, which prevented spore adhesion. Extraction solution significantly impacted the extraction efficiency, as determined by statistical analysis (P < 0.05). Moreover, the extraction solution was the most important factor in extraction performance, followed by the wipe material. Polyester-rayon was the most efficient wipe material for releasing spores into solution by rank; however, no statistically significant difference between polyester-rayon and cotton was observed (P > 0.05). Vortexing provided higher spore recovery in H(2)O and H(2)O-T than sonication, when all three wipe materials and the reference control were considered (P < 0.05).