ABSTRACT
Catalytic elimination of halogenated volatile organic compound (HVOC) emissions was still a huge challenge through conventional catalytic combustion technology, such as the formation of halogenated byproducts and the destruction of the catalyst structure; hence, more efficient catalysts or a new route was eagerly desired. In this work, crystal phase- and defect-engineered CePO4 was rationally designed and presented abundant acid sites, moderate redox ability, and superior thermal/chemical stability; the halogenated byproduct-free and stable elimination of HVOCs was achieved especially in the presence of H2O. Hexagonal and defective CePO4 with more structural H2O and Brønsted/Lewis acid sites was more reactive and durable compared with monoclinic CePO4. Based on the phase and defect engineering of CePO4, in situ diffuse reflectance infrared Fourier transform spectra (DRIFTS), and kinetic isotope effect experiments, a hydrolysis-oxidation pathway characterized by the direct involvement of H2O was proposed. Initiatively, an external electric field (5 mA) significantly accelerated the elimination of HVOCs and even 90% conversion of dichloromethane could be obtained at 170 °C over hexagonal CePO4. The structure-performance-dependent relationships of the engineered CePO4 contributed to the rational design of efficient catalysts for HVOC elimination, and this pioneering work on external electric field-assisted catalytic hydrolysis-oxidation established an innovative HVOC elimination route.
ABSTRACT
Short carbon chain alkanes, as typical volatile organic compounds (VOCs), have molecular structural stability and low molecular polarity, leading to an enormous challenge in the catalytic oxidation of propane. Although Ru-based catalysts exhibit a surprisingly high activity for the catalytic oxidation of propane to CO2 and H2O, active RuOx species are partially oxidized and sintered during the oxidation reaction, leading to a decrease in catalytic activity and significantly inhibiting their application in industrial processes. Herein, the Ru/Ce@Co catalyst is synthesized with a specific structure, in which cerium dioxide is dispersed in a thin layer on the surface of Co3O4, and Ru nanoparticles fall preferentially on cerium oxide with high dispersity. Compared with the Ru/CeO2 and Ru/Co3O4 catalysts, the Ru/Ce@Co catalyst demonstrates excellent catalytic activity and stability for the oxidation of propane, even under severe operating conditions, such as recycling reaction, high space velocity, a certain degree of moisture, and high temperature. Benefiting from this particular structure, the Ru/Ce@Co (5:95) catalyst with more Ce3+ species leads to the Ru species being anchored more firmly on the CeO2 surface with a low-valent state and has a strong potential for adsorption and activation of propane and oxygen, which is beneficial for RuOx species with high activity and stability. This work provides a novel strategy for designing high-efficiency Ru-based catalysts for the catalytic combustion of short carbon alkanes.
Subject(s)
Oxidation-Reduction , Catalysis , Cerium/chemistry , Propane/chemistry , Propane/analogs & derivatives , Ruthenium/chemistryABSTRACT
An improved fundamental understanding of active site structures can unlock opportunities for catalysis from conceptual design to industrial practice. Herein, we present the computational discovery and experimental demonstration of a highly active surface-phosphorylated ceria catalyst that exhibits robust chlorine tolerance for catalysis. Ab initio molecular dynamics (AIMD) calculations and in situ near-ambient pressure X-ray photoelectron spectroscopy (in situ NAP-XPS) identified a predominantly HPO4 active structure on CeO2(110) and CeO2(111) facets at room temperature. Importantly, further elevating the temperature led to a unique hydrogen (H) atom hopping between coordinatively unsaturated oxygen and the adjacent PâO group of HPO4. Such a mobile H on the catalyst surface can effectively quench the chlorine radicals (Clâ¢) via an orientated reaction analogous to hydrogen atom transfer (HAT), enabling the surface-phosphorylated CeO2-supported monolithic catalyst to exhibit both expected activity and stability for over 68 days during a pilot test, catalyzing the destruction of a complex chlorinated volatile organic compound industrial off-gas.
Subject(s)
Chlorine , Oxygen , Catalysis , Temperature , HydrogenABSTRACT
Crystal engineering of metal oxide supports represents an emerging strategy to improve the catalytic performance of noble metal catalysts in catalytic oxidation of chlorinated volatile organic compounds (CVOCs). Herein, Pt catalysts on a TiO2 support with different crystal phases (rutile, anatase, and mixed phase (P25)) were prepared for catalytic oxidation of 1,2-dichloroethane (DCE). The Pt catalyst on P25-TiO2 (Pt/TiO2-P) showed optimal activity, selectivity, and stability, even under high-space velocity and humidity conditions. Due to the strong interaction between Pt and P25-TiO2 originating from the more lattice defects of TiO2, the Pt/TiO2-P catalyst possessed stable Pt0 and Pt2+ species during DCE oxidation and superior redox property, resulting in high activity and stability. Furthermore, the Pt/TiO2-P catalyst possessed abundant hydroxyl groups, which prompted the removal of chlorine species in the form of HCl and significantly decreased the selectivity of vinyl chloride (VC) as the main byproduct. On the other hand, the Pt/TiO2-P catalyst exhibited a different reaction path, in which the hydroxyl groups on its surface activated DCE to form VC and enolic species, besides the lattice oxygen of TiO2 for the Pt catalysts on rutile and anatase TiO2. This work provides guidance for the rational design of catalysts for CVOCs.
Subject(s)
Titanium , Vinyl Chloride , Titanium/chemistry , Oxidation-Reduction , Ethylene Dichlorides/chemistryABSTRACT
In this study, based on the comparison of two counterparts [Mn- and Cr-modified CeO2 nanobelts (NBs)] with the opposite effects, some novel mechanistic insights into the ethyl acetate (EA) catalytic combustion over CeO2-based catalysts were proposed. The results demonstrated that EA catalytic combustion consisted of three primary processes: EA hydrolysis (C-O bond breakage), the oxidation of intermediate products, and the removal of surface acetates/alcoholates. Rapid EA hydrolysis typically occurs on surface acid/base sites or hydroxyl groups, and the removal of surface acetates/alcoholates resulting from EA hydrolysis is considered the rate-determining step. The deposited acetates/alcoholates like a shield covered the active sites (such as surface oxygen vacancies), and the enhanced mobility of the surface lattice oxygen as an oxidizing agent played a vital role in breaking through the shield and promoting the further hydrolysis-oxidation process. The Cr modification impeded the release of surface-activated lattice oxygen from the CeO2 NBs and induced the accumulation of acetates/alcoholates at a higher temperature due to the increased surface acidity/basicity. Conversely, the Mn-substituted CeO2 NBs with the higher lattice oxygen mobility effectively accelerated the in situ decomposition of acetates/alcoholates and facilitated the re-exposure of surface active sites. This study may contribute to a further mechanistic understanding into the catalytic oxidation of esters or other oxygenated volatile organic compounds over CeO2-based catalysts.
Subject(s)
Acetates , Oxygen , Hydrolysis , Oxidation-Reduction , Acetates/chemistryABSTRACT
Ru-based catalysts have been extensively employed for the catalytic destruction of chlorinated volatile organic compounds (VOCs), but their versatility for other routine VOCs' destruction has been less explored. Herein, we show that Ru-decorated SnO2/CeO2 mixed oxides can sustain H2O and HCl poisonings and are endowed with extraordinary versatility for a wide range of VOCs' destruction. Selective adsorption of Ru on the cassiterite SnO2 and CeO2 nanorods through a Coulomb force can rationally tune the oxidation and dechlorination centers on decorated catalysts, where the epitaxial growth of RuOx on top of SnO2 is endowed with excellent dechlorination ability and that on CeO2 is functional as an oxidation center; the latter could also activate H2O to provide sufficient H protons for HCl formation. Our developed Ru/SnO2/CeO2 catalyst can steadily destruct mono-chlorobenzene, ortho-dichlorobenzene, trichloroethylene, dichloromethane, epichlorohydrin, N-hexane, ethyl acetate, toluene, and their mixtures at an optimum temperature of 300 °C, and its monolithic form is also functional at this temperature with few dioxins being detected in the off-gas. Our results imply that the Ru-decorated SnO2/CeO2 catalyst can meet the demands of regenerative catalytic oxidation for the treatment of a wide range of VOCs from industrial exhausts.
Subject(s)
Oxides , Volatile Organic Compounds , Adsorption , Catalysis , Oxidation-ReductionABSTRACT
Understanding the formation and inhibition of more toxic polychlorinated byproducts from the catalytic oxidation elimination of chlorinated volatile organic compounds (Cl-VOCs) and unveiling efficient strategies have been essential and challenging. Here, RuOx supported on CePO4-doped CeO2 nanosheets (Ru/Pi-CeO2) is designed for boosting catalytic oxidation for the removal of dichloromethane (DCM) as a representative Cl-VOC. The promoted acid strength/number and sintering resistance due to the doping of electron-rich and thermally stable CePO4 are observed along with the undescended redox ability and the exposed multi-active sites, which demonstrates a high activity and durability of DCM oxidation (4000 mg/m3 and 15,000 mL/g·h, stable complete-oxidation at 300 °C), exceptional versatility for different Cl-VOCs, alkanes, aromatics, N-containing VOCs, CO and their multicomponent VOCs, and enhanced thermal stability. The suppression of polychlorinated byproducts is determined over Ru/Pi-CeO2 and oxy-anionic S, V, Mo, Nb, or W doping CeO2, thus the oxy-anionic doping strategy is proposed based on the quenching of the electron-rich oxy-anions on chlorine radicals. Moreover, the simple mechanical mixing with these oxy-anionic salts is also workable even for other catalysts such as Co, Sn, Mn, and noble metal-based catalysts. This work offers further insights into the inhibition of polychlorinated byproducts and contributes to the convenient manufacture of monolithic catalysts with superior chlorine-poisoning resistance for the catalytic oxidation of Cl-VOCs.
Subject(s)
Volatile Organic Compounds , Anions , Catalysis , Chlorine , Oxidation-ReductionABSTRACT
MnO2 nanorods with exposed (110), (100), or (310) facets were prepared and investigated for catalytic oxidation of chlorobenzene, then the (110)-exposed MnO2 nanorod was screened as the candidate parent and further modified by Pt and/or Mo with different contents. The loading of Pt enhanced activity and versatility of the pristine MnO2, but the polychlorinated byproducts and Cl2 were promoted, conversely, as the decoration of Mo inhibited the polychlorinated byproducts and improved durability. Determination of structure and properties suggested that Pt facilitated the formation of more oxygen vacancies/Mn3+ and surface adsorbed oxygen weakened the bonds of surface lattice oxygen, while Mo stabilized surface lattice oxygen and increased acid sites, especially Brønsted acid sites. Expectedly, Pt and Mo bifunctionally modified MnO2 presented a preferable activity, selectivity, and durability along with the super resistance to H2O, high-temperature, and HCl, and no prominent deactivation was observed within 30 h at 300 °C under dry and humid conditions, even at high-temperature aging at 600 °C and HCl-pretreatment (7 h). In this work, the optimized Mo and Pt codecorated MnO2 was considered a promising catalyst toward practical applications for catalytic oxidation of actual Cl-VOCs emissions.
Subject(s)
Manganese Compounds , Nanotubes , Catalysis , Chlorobenzenes , OxidesABSTRACT
Catalytic combustion of propane as typical light alkanes was important for the purification of industrial VOCs and automobile hydrocarbon emissions. Si-doped Al2O3 nanosheet was synthesized by a hydrothermal method, and effects of Si content on the morphology and thermal stability of Al2O3 were investigated. The doping of SiO2 could tune the thickness of Al2O3 nanosheets and significantly improve its thermal stability, the θ phase was still maintained, and the specific surface area was as high as 56.3 m2 g-1 after calcination at 1200 °C. And then the Si-doped Al2O3 nanosheets were used as support of Pd catalysts (Pd/Si-Al2O3 nanosheets) for catalytic combustion of propane, especially Pd/3.6Si-Al2O3 nanosheets, which presented high activity, stability, and resistance to sintering and H2O due to the promotion of Si on the thermal stability of Al2O3 and the stabilization (dispersion, isolation, and strong interaction) of PdOx species.
Subject(s)
Propane , Water , Catalysis , Silicon DioxideABSTRACT
Bulk metal doping and surface phosphate modification were synergically adopted in a rational design to upgrade the CeO2 catalyst, which is highly active but easily deactivated for the catalytic oxidation of chlorinated volatile organic compounds (Cl-VOCs). The metal doping increased the redox ability and defect sites of CeO2, which mostly promoted catalytic activity and inhibited the formation of dechlorinated byproducts but generated polychlorinated byproducts. The subsequent surface modification of the metal-doped CeO2 catalysts with nonmetallic phosphate completely suppressed the formation of polychlorinated byproducts and, more importantly, enhanced the stability of the surface structure by forming a chainmail layer. A highly active, durable, and selective catalyst of phosphate-functionalized RuOx-CeO2 was the most promising among all the metal-doped (Ru, Pd, Pt, Cr, Mn, Fe, Co, and Cu) CeO2 catalysts investigated owing to the prominent chemical stability of RuOx and its superior versatility in the catalytic oxidation of different kinds of Cl-VOCs and other typical pollutants, including dimethyl sulfide, CO, and C3H8. Moreover, the chemical stability of the catalyst, including its bulk and surface structural stability, was investigated by combining intensive treatment with HCl/H2O or HCl with subsequent ex situ ultraviolet-visible light Raman spectroscopy and confirmed the superior resistance to Cl poisoning of the phosphate-functionalized RuOx-CeO2. This work exemplifies a promising strategy for developing ideal catalysts for the removal of Cl-VOCs and provides a catalyst with the superior catalytic performance in Cl-VOC oxidation to date.
Subject(s)
Phosphates , Catalysis , Oxidation-ReductionABSTRACT
A unique zeolite catalyst, Fe doped ZSM-5 microsphere assembled by uniform nanorod-like crystals with hierarchical pore structure, was successfully synthesized and applied for the adsorption and degradation of trace chlorobenzene (CB) in the presence of H2O2. The organic ferric salts as the precursors, ethylene glycol as a chelating/reducing agent and the dynamic two-stage temperature-varied hydrothermal technique, together made the synthesized hierarchical Fe-ZSM-5 nanorods assembled microspheres (FZ-CA-5EG) to be characterized by abundant highly dispersed and valency-controlled framework Fe3+/2+ species. As a result of these features, the FZ-CA-5EG showed excellent ability of adsorption and degradation efficiency of CB, and enhanced durability due to negligible leaching of framework Fe species. Moreover, the hydroxyl radicals were determined as the main the reactive oxygen species of CB oxidation degradation, and a possible adsorption-oxidation degradation pathway was proposed.
ABSTRACT
Tuning the nature and profile of acidic and basic sites on the surface of redox-active metal oxide nanostructures is a promising approach to constructing efficient catalysts for the oxidative removal of chlorinated volatile organic compounds (CVOCs). Herein, using dichloromethane (DCM) oxidation as a model reaction, we report that phosphate (PO x) Brønsted acid sites can be incorporated onto a CeO2 nanosheet (NS) surface via an organophosphate-mediated route, which can effectively enhance the CeO2's catalytic performance by promoting the removal of chlorine poisoning species. From the systematic study of the correlation between PO x composition, surface structure (acid and basic sites), and catalytic properties, we find that the incorporated Brønsted acid sites can also function to decrease the amount of medium-strong basic sites (O2-), reducing the formation of chlorinated organic byproduct monochloromethane (MCM) and leading to the desirable product, HCl. At the optimized P/Ce ratio (0.2), the PO x-CeO2 NSs can perform a stable DCM conversion of 65-70% for over 10 h at 250 °C and over 95% conversion at 300 °C, superior to both pristine and other phosphate-modified CeO2 NSs. Our work clearly identifies the critical role of acid and basic sites over functionalized CeO2 for efficient catalytic CVOCs oxidation, guiding future advanced catalyst design for environmental remediation.
Subject(s)
Cerium , Methylene Chloride , Organophosphates , Oxidation-Reduction , PhosphatesABSTRACT
Ru/Ce x Al y catalysts were synthesized with impregnation of RuCl3 aqueous solution on Ce x Al y (Al2O3-CeO2) and used in 1,2-dichloroethane (1,2-DCE) oxidation. Characterization by X-ray diffraction, Raman, NH3-temperature-programmed desorption (TPD), CO2-TPD, X-ray photoelectron spectroscopy, and H2-temperature-programmed reduction indicates that CeO2 exists as a form of face-centered cubic fluorite structure, whereas the chemical states and the structure of Ru species are dependent on the Ce content. The reducibility and acidity of catalysts increase with Ce/Ce + Al ratio. However, the latter is promoted only in a Ce/Ce + Al range of 0-0.25 and then decreases quickly. Ru/Ce x Al y catalysts have considerable activity for 1,2-DCE combustion. TOFRu of 1,2-DCE oxidation increases with strong acid, which is ascribed to a synergy of reducibility and acidity. Ru greatly inhibits the chlorination through the decreases in both Cl deposition and CH2=CHCl formation. High stability of Ru/Ce10Al90 maintains at 280 °C for at least 25 h with CO2 selectivity of 99% or higher. In situ Fourier transform infrared spectroscopy indicates that 1,2-DCE dissociates to form ClCH2-CH2O- species, which is an intermediate species for the production of CH3CHO and CH2=CHCl, the former responsible for deep oxidation.
ABSTRACT
Carbon dioxide (CO2) hydrogenation to ethanol (C2H5OH) is considered a promising way for CO2 conversion and utilization, whereas desirable conversion efficiency remains a challenge. Herein, highly active, selective and stable CO2 hydrogenation to C2H5OH was enabled by highly ordered Pd-Cu nanoparticles (NPs). By tuning the composition of the Pd-Cu NPs and catalyst supports, the efficiency of CO2 hydrogenation to C2H5OH was well optimized with Pd2Cu NPs/P25 exhibiting high selectivity to C2H5OH of up to 92.0% and the highest turnover frequency of 359.0 h-1. Diffuse reflectance infrared Fourier transform spectroscopy results revealed the high C2H5OH production and selectivity of Pd2Cu NPs/P25 can be ascribed to boosting *CO (adsorption CO) hydrogenation to *HCO, the rate-determining step for the CO2 hydrogenation to C2H5OH.
ABSTRACT
PdO/CeO2 nanosheets encapsulated by a monolayer of a continuous and dense HZSM-5 zeolite membrane were prepared by a facile in situ hydrothermal growth process and used as a highly efficient and thermally stable catalyst for methane combustion. Uncoated PdO/CeO2 suffered severe sintering at high temperature or high oxygen concentration. However, the encapsulation of HZSM-5 significantly improved sintering resistance by the suppressing effects of the HZSM-5 coating for the agglomeration of PdOx nanoparticles, resulting in the outstanding thermal stability of PdO/CeO2. Furthermore, the synthesized hybrid materials also exhibited good oxygen- and water-tolerance for methane combustion due to the oxygen or water barrier. In addition, a reactivation behavior was observed due to the self-redispersion of PdOx on CeO2 nanosheets in the reaction atmosphere at high temperature.
ABSTRACT
Highly efficient In2O3-Co3O4 catalysts were prepared for ultralow-temperature CO oxidation by simultaneously tuning the CO adsorption strength and oxygen activation over a Co3O4 surface, which could completely convert CO to CO2 at temperatures as low as -105 °C compared to -40 °C over pure Co3O4, with enhanced stability.
ABSTRACT
Mn-Ce-La oxide-mixed catalysts prepared by the method of complexation followed by calcination at 750°C were tested in the catalytic combustion of chlorobenzene (CB) taken as a model of chlorinated aromatics. XRD analyses show that Mn and La enter CeO2 matrix with a fluorite-like structure to form solid solution. The catalysts with high ratio of Mn/Mn+Ce+La exhibit high activity for CB combustion, due to high oxygen mobility. For all Mn-Ce-La catalysts, deactivation due to Cl adsorption is observed at different temperatures, depending on composition. At 330°C or higher temperature, the removal of Cl species from the surface in the forms of Cl2 (produced through Deacon reaction) and HCl (produced through hydrolysis of Cl) occurs and the activity of catalysts for CB combustion becomes thus stable. Either the addition of water or the increase in gaseous oxygen concentration can promote the removal of Cl species, and thus to increase the activity for CB combustion. High stable activity of Mn-Ce-La catalysts can be related to the combination of good oxidation and Deacon reaction performances.
Subject(s)
Cerium/chemistry , Chlorides/isolation & purification , Hot Temperature , Lanthanum/chemistry , Manganese/chemistry , Adsorption , Catalysis , Chlorides/chemistry , Powder DiffractionABSTRACT
Mesoporous Ce(OH)CO(3) microspheres with flowerlike three-dimensional (3D) hierarchical structure were successfully synthesized via different hydrothermal systems, including glucose/acrylic acid, fructose/acrylic acid, glucose/propanoic acid, and glucose/n-butylamine systems. After Ce(OH)CO(3) microspheres were calcined, mesoporous CeO(2) microspheres with the same flowerlike morphology as Ce(OH)CO(3) microspheres were obtained. Especially, flowerlike CeO(2) microspheres prepared via the glucose/acrylic acid system are composed of many interconnected mesoporous petal-like nanosheets with thicknesses of 40-60 nm and have high surface area (211 m(2) g(-1)), large pore volume (0.32 cm(3) g(-1)), and narrow pore size distribution ( approximately 3.8 nm in diameter). A possible formation mechanism of Ce(OH)CO(3) microspheres is proposed: the large N-containing organic compounds in situ produced in the above reaction systems played a crucial role in controlling the assembly of Ce(OH)CO(3) building blocks into the flowerlike Ce(OH)CO(3) microspheres. For trichloroethylene combustion, flowerlike CeO(2) microspheres were found to exhibit much higher catalytic activity than general CeO(2) prepared with the conventional methods and the T(10%) and T(90%) were as low as 100 and 204 degrees C, respectively.