Joint Theoretical and Experimental Study of Stress Graphitization in Aligned Carbon Nanotube/Carbon Matrix Composites.

Stress graphitization is a unique phenomenon at the carbon nanotube (CNT)-matrix interfaces in CNT/carbon matrix (CNT/C) composites. A lack of fundamental atomistic understanding of its evolution mechanisms and a gap between the theoretical and experimental research have hindered the pursuit of utilizing this phenomenon for producing ultrahigh-performance CNT/C composites. Here, we performed reactive molecular dynamics simulations along with an experimental study to explore stress graphitization mechanisms of a CNT/polyacrylonitrile (PAN)-based carbon matrix composite. Different CNT contents in the composite were considered, while the nanotube alignment was controlled in one direction in the simulations. We observe that the system with a higher CNT content exhibits higher localized stress concentration in the periphery of CNTs, causing alignment of the nitrile groups in the PAN matrix along the CNTs, which subsequently results in preferential dehydrogenation and clustering of carbon rings and eventually graphitization of the PAN matrix when carbonized at 1500 K. These simulation results have been validated by experimentally produced CNT/PAN-based carbon matrix composite films, with transmission electron microscopy images showing the formation of additional graphitic layers converted by the PAN matrix around CNTs, where 82 and 144% improvements of the tensile strength and Young's modulus are achieved, respectively. The presented atomistic details of stress graphitization can provide guidance for further optimizing CNT-matrix interfaces in a more predictive and controllable way for the development of novel CNT/C composites with high performance.

Isoform-specific knockdown of long and intermediate prolactin receptors interferes with evolution of B-cell neoplasms.

Prolactin (PRL) is elevated in B-cell-mediated lymphoproliferative diseases and promotes B-cell survival. Whether PRL or PRL receptors drive the evolution of B-cell malignancies is unknown. We measure changes in B cells after knocking down the pro-proliferative, anti-apoptotic long isoform of the PRL receptor (LFPRLR) in vivo in systemic lupus erythematosus (SLE)- and B-cell lymphoma-prone mouse models, and the long plus intermediate isoforms (LF/IFPRLR) in human B-cell malignancies. To knockdown LF/IFPRLRs without suppressing expression of the counteractive short PRLR isoforms (SFPRLRs), we employ splice-modulating DNA oligomers. In SLE-prone mice, LFPRLR knockdown reduces numbers and proliferation of pathogenic B-cell subsets and lowers the risk of B-cell transformation by downregulating expression of activation-induced cytidine deaminase. LFPRLR knockdown in lymphoma-prone mice reduces B-cell numbers and their expression of BCL2 and TCL1. In overt human B-cell malignancies, LF/IFPRLR knockdown reduces B-cell viability and their MYC and BCL2 expression. Unlike normal B cells, human B-cell malignancies secrete autocrine PRL and often express no SFPRLRs. Neutralization of secreted PRL reduces the viability of B-cell malignancies. Knockdown of LF/IFPRLR reduces the growth of human B-cell malignancies in vitro and in vivo. Thus, LF/IFPRLR knockdown is a highly specific approach to block the evolution of B-cell neoplasms.

Molecular Alignment of a Meta-Aramid on Carbon Nanotubes by In Situ Interfacial Polymerization.

Molecularly organized nanocomposites of polymers and carbon nanotubes (CNTs) have great promise as high-performance materials; in particular, conformal deposition of polymers can control interfacial properties for mechanical load transfer, electrical or thermal transport, or electro/chemical transduction. However, controllability of polymer-CNT interaction remains a challenge with common processing methods that combine CNTs and polymers in melt or in solution, often leading to nonuniform polymer distribution and CNT aggregation. Here, we demonstrate CNTs within net-shape sheets can be controllably coated with a conformal coating of meta-aramid by simultaneous capillary infiltration and interfacial polymerization. We determine that π-interaction between the polymer and CNTs results in chain alignment parallel to the CNT outer wall. Subsequent nucleation and growth of the precipitated aramid forms a smooth continuous layered sheath around the CNTs. These findings motivate future investigation of mechanical properties of the resulting composites, and adaptation of the in situ polymerization method to other substrates.

Atomistic Scale Analysis of the Carbonization Process for C/H/O/N-Based Polymers with the ReaxFF Reactive Force Field.

During the carbonization process of raw polymer precursors, graphitic structures can evolve. The presence of these graphitic structures affects mechanical properties of the carbonized carbon fibers. To gain a better understanding of the chemistry behind the evolution of these structures, we performed atomistic-scale simulations using the ReaxFF reactive force field. Three different polymers were considered as a precursor: idealized ladder PAN (polyacrylonitrile), a proposed oxidized PAN, and poly( p-phenylene-2,6-benzobisoxazole). We determined the underlying molecular details of polymer conversion into a carbon fiber structure. Because these are C/H/O/N-based polymers, we first developed an improved force field for C/H/O/N chemistry based on the density functional theory data with a particular focus on N2 formation kinetics and its interactions with polymer-associated radicals formed during the carbonization process. Then, using this improved force field, we performed atomistic-scale simulations of the initial stage of the carbonization process for the considered polymers. On the basis of our simulation data, the molecular pathways for the formation of low-molecular-weight gas species and all-carbon ring formation were determined. We also examined the possible alignment of the developed all-carbon 6-membered ring clusters, which is crucial for the further graphitic structure evolution.

Homo-oligomerization of transmembrane α-domain of integrin.

Integrins contribute to form focal adhesions complex. Therefore, simulation of integrin interactions can be helpful in clarifying the mechanism of focal adhesion formation. Interactions of integrins can also initiate signal transduction in the focal adhesions. Since integrins contain α and ß subunits that are separated in an active state, studying both subunits separately is crucial, since, in the active state of integrins, the distance between these subunits is long enough that they do not influence one another significantly. Thus, this study aims to investigate the tendency of α subunits of integrins to form homodimers. All simulations were carried out via MARTINI coarse grain (CG) molecular dynamics technique. α subunits were placed in 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipid bilayer at a distance of 5 nm, and they were allowed to diffuse in the lipid bilayer. All simulations showed that α subunits have a tendency to form stable dimers.