Combining slow-release fertilizer and plastic film mulching reduced the carbon footprint and enhanced maize yield on the Loess Plateau.

Agricultural practices significantly contribute to greenhouse gas (GHG) emissions, necessitating cleaner production technologies to reduce environmental pressure and achieve sustainable maize production. Plastic film mulching is commonly used in the Loess Plateau region. Incorporating slow-release fertilizers as a replacement for urea within this practice can reduce nitrogen losses and enhance crop productivity. Combining these techniques represents a novel agricultural approach in semi-arid areas. However, the impact of this integration on soil carbon storage (SOCS), carbon footprint (CF), and economic benefits has received limited research attention. Therefore, we conducted an eight-year study (2015-2022) in the semi-arid northwestern region to quantify the effects of four treatments [urea supplied without plastic film mulching (CK-U), slow-release fertilizer supplied without plastic film mulching (CK-S), urea supplied with plastic film mulching (PM-U), and slow-release fertilizer supplied with plastic film mulching (PM-S)] on soil fertility, economic and environmental benefits. The results revealed that nitrogen fertilizer was the primary contributor to total GHG emissions (≥71.97%). Compared to other treatments, PM-S increased average grain yield by 12.01%-37.89%, water use efficiency by 9.19%-23.33%, nitrogen accumulation by 27.07%-66.19%, and net return by 6.21%-29.57%. Furthermore, PM-S decreased CF by 12.87%-44.31% and CF per net return by 14.25%-41.16%. After eight years, PM-S increased SOCS (0-40 cm) by 2.46%, while PM-U decreased it by 7.09%. These findings highlight the positive effects of PM-S on surface soil fertility, economic gains, and environmental benefits in spring maize production on the Loess Plateau, underscoring its potential for widespread adoption and application.

Efficient roller-driven elastocaloric refrigerator.

Elastocaloric cooling has experienced fast development over the past decade owing to its potential to reshape the refrigeration industry. While the solid-state elastocaloric refrigerant is emission-free, the efficiency of the state-of-the-art elastocaloric cooling systems is not sufficient yet to reduce carbon emissions during operation. In this study, we double the coefficient of performance, the most commonly used efficiency metric, via the synergy of material-level advances in TiNiCu and the system-level roller-driven mechanism capable of recovering kinetic energy. On the materials level, a 125% improvement in coefficient of performance is illustrated in TiNiCu compared to NiTi, empowered by the B2-B19 martensitic transformation with improved lattice compatibility and the grain boundary strengthening from the nanocrystalline structure. On the system level, owing to the properly sized angular momentum in rotating parts, 78% work recovery efficiency is reported, transcending the theoretical limit previously unattainable without kinetic energy recovery. This confluence of materials and mechanical innovations propels elastocaloric cooling systems into a new realm of efficiency and paves the way for their practical application.

Plant diversity decreases greenhouse gas emissions by increasing soil and plant carbon storage in terrestrial ecosystems.

The decline in global plant diversity has raised concerns about its implications for carbon fixation and global greenhouse gas emissions (GGE), including carbon dioxide (CO2), nitrous oxide (N2O) and methane (CH4). Therefore, we conducted a comprehensive meta-analysis of 2103 paired observations, examining GGE, soil organic carbon (SOC) and plant carbon in plant mixtures and monocultures. Our findings indicate that plant mixtures decrease soil N2O emissions by 21.4% compared to monocultures. No significant differences occurred between mixtures and monocultures for soil CO2 emissions, CH4 emissions or CH4 uptake. Plant mixtures exhibit higher SOC and plant carbon storage than monocultures. After 10 years of vegetation development, a 40% reduction in species richness decreases SOC content and plant carbon storage by 12.3% and 58.7% respectively. These findings offer insights into the intricate connections between plant diversity, soil and plant carbon storage and GGE-a critical but previously unexamined aspect of biodiversity-ecosystem functioning.

Insights into starch synthesis and amino acid composition of common buckwheat in response to phosphate fertilizer management strategies.

To investigate the response and the regulatory mechanism of common buckwheat starch, amylose, and amylopectin biosynthesis to P management strategies, field experiments were conducted in 2021 and 2022 using three phosphorus (P) levels. Results revealed that the application of 75 kg hm-2 phosphate fertilizer significantly enhanced amylopectin and total starch content in common buckwheat, leading to improved grain weight and starch yield, and decreased starch granule size. The number of upregulated differentially expressed proteins induced by phosphate fertilizer increased with the application rate, with 56 proteins identified as shared differential proteins between different P levels, primarily associated with carbohydrate and amino acid metabolism. Phosphate fertilizer inhibited amylose synthesis by downregulating granule-bound starch synthase protein expression and promoted amylopectin accumulation by upregulating 1,4-alpha-glucan branching enzyme and starch synthase proteins expression. Additionally, Phosphate fertilizer primarily promoted the accumulation of hydrophobic and essential amino acids. These findings elucidate the mechanism of P-induced starch accumulation and offer insights into phosphate fertilizer management and high-quality cultivation of common buckwheat.

Straw returning and nitrogen reduction: Strategies for sustainable maize production in the dryland.

Implementing continue straw returning practices and optimizing nitrogen application can mitigate nitrogen losses and enhance nitrogen use efficiency (NUE) in dryland. 15N-labeled technique offers a robust approach for tracking fertilizer nitrogen fate and assessing nitrogen use efficiency. Based on the continue (>6 yr) experiment, we conducted a two-year experiment (2020 and 2021) to evaluate the effects of straw returning and nitrogen management under plastic film mulching on 15N recovery rates, N2O emissions and maize yield with three treatments: no straw returning with 225 kg N·ha-1 under plastic film mulching (RP-N225), straw returning with 225 kg N·ha-1 under plastic film mulching (RPS-N225), and straw returning with 20% nitrogen reduction (180 kg N·ha-1) under plastic film mulching (RPS-N180). After six years, both continue straw returning with plastic film mulching increased uptake of fertilizer nitrogen, had higher 15N recovery rates than RP-N225, leading to increased 15N accumulation in grain and aboveground biomass, ultimately enhancing yield. The RPS-N225 treatment exhibited the highest spring maize yield and nitrogen harvest index. The RPS-N180 treatment significantly increased maize yield more than RP-N225 and had the highest NUE, partial factor productivity of nitrogen fertilizer, and nitrogen uptake efficiency, with improvements ranging from 1.7 to 2.4%, 19.3-29.6%, and 17.3-27.5%, respectively, compared to the other treatments. Moreover, RPS-N225 resulted in significantly higher cumulative N2O emissions and yield-scaled N2O emissions than the other treatments, whereas the RPS-N180 treatment significantly decreased yield-scaled N2O emissions compared to RP-N225. Hence, combining continue straw returning with appropriate nitrogen reduction can effectively increase maize yield and yield-scaled N2O emissions. By offering insights into optimizing nitrogen fertilizer management after continue maize straw return, this study is contributed to widespread adoption of straw return practices and sustainable agricultural development in semi-arid areas.

Enhancing intercropping sustainability: Manipulating soybean rhizosphere microbiome through cropping patterns.

Understanding the responses of soybean rhizosphere and functional microbiomes in intercropping scenarios holds promise for optimizing nitrogen utilization in legume-based intercropping systems. This study investigated three cropping layouts under film mulching: sole soybean (S), soybean-maize intercropping in one row (IS), and soybean-maize intercropping in two rows (IIS), each subjected to two nitrogen levels: 110 kg N ha-1 (N110) and 180 kg N ha-1 (N180). Our findings reveal that cropping patterns alter bacterial and nifh communities, with approximately 5 % of soybean rhizosphere bacterial amplicon sequence variants (ASVs) and 42 % of rhizosphere nifh ASVs exhibiting altered abundances (termed sensitive ASVs). Root traits and soil properties shape these communities, with root traits exerting greater influence. Sensitive ASVs drive microbial co-occurrence networks and deterministic processes, predicting 85 % of yield variance and 78 % of partial factor productivity of nitrogen, respectively. These alterations impact bacterial and nifh diversity, complexity, stability, and deterministic processes in legume-based intercropping systems, enhancing performance in terms of yield, nitrogen utilization efficiency, land equivalent ratio, root nodule count, and nodule dry weight under IIS patterns with N110 compared to other treatments. Our findings underscore the importance of field management practices in shaping rhizosphere-sensitive ASVs, thereby altering microbial functions and ultimately impacting the productivity of legume-based intercropping systems. This mechanistic understanding of soybean rhizosphere microbial responses to intercropping patterns offers insights for sustainable intercropping enhancements through microbial manipulation.

Nitrogen regulates the synthesis of hydrophobic amino acids to improve protein structural and gel properties in common buckwheat.

Nitrogen (N) fertilizer impacts the grain quality of common buckwheat, but the effects and regulatory mechanisms of N on various protein parameters of buckwheat are not fully understood. The purpose of this study was to investigate the particle morphology, structural and gel properties, and regulation mechanism of buckwheat protein under four N levels. The bulk density, surface hydrophobicity, particle size, and thermal properties of the buckwheat protein were maximized through the optimal N application (180 kg N/ha), further enhancing the thermal stability of the protein. N application increased the ß-sheet content and reduced the random coil content. Appropriate N fertilizer input enhanced the tertiary structure stability and gel elasticity of buckwheat protein by promoting hydrophobic interactions, disulfide bonds, ionic bonds, storage modulus and loss modulus. The differentially expressed proteins induced by N are primarily enriched in small ribosomal subunit and ribosome, improving protein quality mainly by promoting the synthesis of hydrophobic amino acids. Future agriculture should pay attention to the hydrophobic amino acid content of buckwheat to effectively improve protein quality. This study further advances the application of buckwheat protein in the field of food processing and provides a theoretical basis for the extensive development and utilization of buckwheat protein.

How Does the Environment Affect Wheat Yield and Protein Content Response to Drought? A Meta-Analysis.

Wheat (Triticum aestivum L.) is one of the most significant cereal crops grown in the semi-arid and temperate regions of the world, but few studies comprehensively explore how the environment affects wheat yield and protein content response to drought by means of meta-analysis. Therefore, we collected data about grain yield (GY), grain protein yield (GPY), grain protein content (GPC), and grain nitrogen content (GNC), and conducted a meta-analysis on 48 previously published data sets that originate from 15 countries. Our results showed that drought significantly decreased GY and GPY by 57.32 and 46.04%, but significantly increased GPC and GNC by 9.38 and 9.27%, respectively. The responses of wheat GY and GNC to drought were mainly related to the drought type, while the GPY was mainly related to the precipitation. The yield reduction due to continuous drought stress (CD, 83.60%) was significantly greater than that of terminal drought stress (TD, 26.43%). The relationship between the precipitation and GPY increased in accordance with linear functions, and this negative drought effect was completely eliminated when the precipitation was more than 513 mm. Sandy soils and high nitrogen application level significantly mitigated the negative effects of drought, but was not the main factor affecting the drought response of wheat. Compared with spring wheat, the drought resistance effect of winter wheat was more obvious. Evaluation of these models can improve our quantitative understanding of drought on wheat yield and food security, minimizing the negative impact of drought on crop production.

Decreased carbon footprint and increased grain yield under ridge-furrow plastic film mulch with ditch-buried straw returning: A sustainable option for spring maize production in China.

Ditch-buried straw returning with ridge-furrow plastic film mulch (RP+S) is a novel tillage measure in semiarid regions, but it is unclear whether RP+S can increase maize yield while reducing the carbon footprint (CF). Therefore, a six-year continuous experiment was conducted from 2016 to 2021 to quantify the effect of four straw returning and film mulching measures [conventional flat cultivation (CK), conventional flat cultivation with ditch-buried straw returning (CK+S), ridge-furrow plastic film mulch (RP), and RP+S] on soil organic carbon sequestration (SOCS), greenhouse gas (GHG) emissions, CF, and economic benefits. Straw returning and film mulching measures significantly increased total GHG emissions across the six seasons. For all treatments, nitrogen fertilizer was the most important source of GHG emissions (≥73%), followed by diesel (8-11%) and plastic film (8%, RP and RP+S only). RP+S significantly increased yield and partial factor productivity of nitrogen fertilizer by 8.7-59.1%, and net economic benefit by 7.37-57.76%, but decreased CF by 34-61% and CF per net return by 33-61% relative to the other treatments. RP+S had the highest GHG emissions, increasing by 6.11-16.47% relative to the other treatments. However, compared with the initial 0-40 cm SOCS in 2016, RP+S had the highest carbon sequestration rate (678.17 kg·ha-1·yr-1), increasing by 2.29% after six years, followed by CK+S (1.78%), CK (0.89%), and RP (-0.49%). Thus, RP+S had the lowest CF and CF per net return in four treatments. This comprehensive analysis of agronomic and environmental benefits revealed that RP+S is a high-yielding, economically and environmentally friendly measure in semiarid areas.

Fault severity assessment of rolling bearing based on optimized multi-dictionaries matching pursuit and Lempel-Ziv complexity.

For the safe working of rolling bearing, this paper presents a fault severity assessment method through optimized multi-dictionaries matching pursuit (OMMP) and Lempel-Ziv (LZ) complexity. To solve the redundancy problem of over-complete dictionary, the OMMP is proposed by introducing the quantum particle swarm optimization into matching pursuit for best representing the original vibration signal. And then, LZ complexity is calculated as an index of fault severity assessment by reconstructed signal. The performance of assessment method is verified through the measured signals of three bearing tests, and the comparisons with various methods are specifically described. The results indicate that the OMMP method averagely takes the shortest running time for the vibration signal decomposition. The assessment method is able to effectively evaluate different fault sizes of rolling bearing, and has a great applicability to in the condition-based maintenance of rotating machineries.

Effects of 1-butyl-3-methylimidazolium chloride on the photosynthetic system and metabolism of maize (Zea mays L.) seedlings.

Ionic liquids (ILs) are widely used in various chemical processes. However, a growing number of studies have found that ILs are potentially toxic to different types of living organisms, including crops. The present study analysed the effects of 1-butyl-3-methylimidazolium chloride ([C4mim]Cl) on the photosynthetic system and metabolism of maize seedlings. Results showed that [C4mim]Cl could significantly reduce maize leaf chlorophyll level and cause extensive leaf bleaching. The activity of photosystem II (PSII) was significantly inhibited when seedlings exposed to higher concentration of [C4mim]Cl. The maximum quantum yield of PSII and the potential efficiency of PSII were reduced by 63% and 88% under 800 mg/L [C4mim]Cl treatment in comparison with the control treatment. The RNA sequencing analysis performed to examine gene expression profiles of maize leaves under [C4mim]Cl treatment revealed 639 differentially expressed genes (DEGs), 115 of which were categorized into different metabolic pathways. Among these DEGs, the seven genes involved in the photosynthetic Calvin cycle were down-regulated by [C4mim]Cl exposure. For carbohydrates and amino acids metabolism, the genes for starch synthesis were down-regulated, while the genes for amino acids and protein degradation were up-regulated. The changes observed in these major metabolic pathways might be an important reason for [C4mim]Cl toxicity.

Recovery of phosphate and dissolved organic matter from aqueous solution using a novel CaO-MgO hybrid carbon composite and its feasibility in phosphorus recycling.

Metal oxide-Carbon composites have been developed tailoring towards specific functionalities for removing pollutants from contaminated environmental systems. In this study, we synthesized a novel CaO-MgO hybrid carbon composite for removal of phosphate and humate by co-pyrolysis of dolomite and sawdust at various temperatures. Increasing of pyrolysis temperature to 900 °C generated a composite rich in carbon, CaO and MgO particles. Phosphate and humate can be removed efficiently by the synthesized composite with the initial solution in the range of pH 3.0-11.0. The phosphate adsorption was best fitted by pseudo-second-order kinetic model, while the humate adsorption followed the pseudo-second-order and the intra-particle diffusion kinetic models. The maximum adsorption capabilities quantified by the Langmuir isotherm model were up to 207 mg phosphorus (or 621 mg phosphate) and 469 mg humate per one-gram composite used, respectively. Characterization of composites after adsorption revealed the contributions of phosphate crystal deposition and electrostatic attraction on the phosphate uptake and involvement of π - π interaction in the humate adsorption. The prepared composite has great potential for recovering phosphorus from wastewater, and the phosphate sorbed composite can be employed as a promising phosphorus slow-releasing fertilizer for improving plant growth.