Suspension culture improves iPSC expansion and pluripotency phenotype.

BACKGROUND: Induced pluripotent stem cells (iPSCs) offer potential to revolutionize regenerative medicine as a renewable source for islets, dopaminergic neurons, retinal cells, and cardiomyocytes. However, translation of these regenerative cell therapies requires cost-efficient mass manufacturing of high-quality human iPSCs. This study presents an improved three-dimensional Vertical-Wheel® bioreactor (3D suspension) cell expansion protocol with comparison to a two-dimensional (2D planar) protocol. METHODS: Sendai virus transfection of human peripheral blood mononuclear cells was used to establish mycoplasma and virus free iPSC lines without common genetic duplications or deletions. iPSCs were then expanded under 2D planar and 3D suspension culture conditions. We comparatively evaluated cell expansion capacity, genetic integrity, pluripotency phenotype, and in vitro and in vivo pluripotency potential of iPSCs. RESULTS: Expansion of iPSCs using Vertical-Wheel® bioreactors achieved 93.8-fold (IQR 30.2) growth compared to 19.1 (IQR 4.0) in 2D (p < 0.0022), the largest expansion potential reported to date over 5 days. 0.5 L Vertical-Wheel® bioreactors achieved similar expansion and further reduced iPSC production cost. 3D suspension expanded cells had increased proliferation, measured as Ki67+ expression using flow cytometry (3D: 69.4% [IQR 5.5%] vs. 2D: 57.4% [IQR 10.9%], p = 0.0022), and had a higher frequency of pluripotency marker (Oct4+Nanog+Sox2+) expression (3D: 94.3 [IQR 1.4] vs. 2D: 52.5% [IQR 5.6], p = 0.0079). q-PCR genetic analysis demonstrated a lack of duplications or deletions at the 8 most commonly mutated regions within iPSC lines after long-term passaging (> 25). 2D-cultured cells displayed a primed pluripotency phenotype, which transitioned to naïve after 3D-culture. Both 2D and 3D cells were capable of trilineage differentiation and following teratoma, 2D-expanded cells generated predominantly solid teratomas, while 3D-expanded cells produced more mature and predominantly cystic teratomas with lower Ki67+ expression within teratomas (3D: 16.7% [IQR 3.2%] vs.. 2D: 45.3% [IQR 3.0%], p = 0.002) in keeping with a naïve phenotype. CONCLUSION: This study demonstrates nearly 100-fold iPSC expansion over 5-days using our 3D suspension culture protocol in Vertical-Wheel® bioreactors, the largest cell growth reported to date. 3D expanded cells showed enhanced in vitro and in vivo pluripotency phenotype that may support more efficient scale-up strategies and safer clinical implementation.

Challenges and opportunities in downstream separation processes for mesenchymal stromal cells cultured in microcarrier-based stirred suspension bioreactors.

Mesenchymal stromal cells (MSC) are a promising platform for regenerative medicine applications because of their multilineage differentiation abilities and ease of collection, isolation, and growth ex vivo. To meet the demand for clinical applications, large-scale manufacturing will be required using three-dimensional culture platforms in vessels such as stirred suspension bioreactors. As MSCs are an adherent cell type, microcarriers are added to the culture to increase the available surface area for attachment and growth. Although extensive research has been performed on efficiently culturing MSCs using microcarriers, challenges persist in downstream processing, including harvesting, filtration, and volume reduction, which all play a critical role in the translation of cell therapies to the clinic. The objective of this review is to assess the current state of downstream technologies available for microcarrier-based MSC cultures. This includes a review of current research within the three stages: harvesting, filtration, and volume reduction. Using this information, a downstream process for MSCs is proposed, which can be applied to a wide range of applications.

Cell Culture Process Scale-Up Challenges for Commercial-Scale Manufacturing of Allogeneic Pluripotent Stem Cell Products.

Allogeneic cell therapy products, such as therapeutic cells derived from pluripotent stem cells (PSCs), have amazing potential to treat a wide variety of diseases and vast numbers of patients globally. However, there are various challenges related to manufacturing PSCs in single-use bioreactors, particularly at larger volumetric scales. This manuscript addresses these challenges and presents potential solutions to alleviate the anticipated bottlenecks for commercial-scale manufacturing of high-quality therapeutic cells derived from PSCs.

Drawing Parallels Among Past Public Health Crises and COVID-19.

In the early stages of the coronavirus disease 2019 (COVID-19) pandemic, there were shortages of personal protective equipment (PPE) and health-care personnel across severely affected regions. Along with a lack of testing, these shortages delayed surveillance, and possible containment of the virus. The pandemic also took unprecedented tolls on the mental health of many health-care workers who treated and witnessed the deaths of critically ill patients. To address these effects and prepare for a potential second wave, a literature review was performed on the response of health-care systems during the influenza pandemics of 1918, 1957, 2009, and the epidemics of Ebola, severe acute respiratory syndrome (SARS), and Middle East respiratory syndrome (MERS). We can use lessons identified to develop a competent and effective response to the current and future pandemics. The public must continue to engage in proper health mitigation strategies, including use of face coverings, physical distancing, and hand washing. The impact the pandemic has had on the mental health of frontline health-care workers cannot be disregarded as it is essential in ensuring effective patient care and mitigating psychological comorbidities. The lessons identified from past public health crises can help contain and limit morbidity and mortality with the ongoing COVID-19 pandemic.

Transcriptional heterogeneity of stemness phenotypes in the ovarian epithelium.

The ovarian surface epithelium (OSE) is a monolayer of epithelial cells surrounding the ovary that ruptures during each ovulation to allow release of the oocyte. This wound is quickly repaired, but mechanisms promoting repair are poorly understood. The contribution of tissue-resident stem cells in the homeostasis of several epithelial tissues is widely accepted, but their involvement in OSE is unclear. We show that traits associated with stem cells can be increased following exposure to the cytokine TGFB1, overexpression of the transcription factor Snai1, or deletion of Brca1. We find that stemness is often linked to mesenchymal-associated gene expression and higher activation of ERK signalling, but is not consistently dependent on their activation. Expression profiles of these populations are extremely context specific, suggesting that stemness may not be associated with a single, distinct population, but rather is a heterogeneous cell state that may emerge from diverse environmental cues. These findings support that the OSE may not require distinct stem cells for long-term maintenance, and may instead achieve this through transient dedifferentiation into a stem-like state.

Overcoming bioprocess bottlenecks in the large-scale expansion of high-quality hiPSC aggregates in vertical-wheel stirred suspension bioreactors.

BACKGROUND: Human induced pluripotent stem cells (hiPSCs) hold enormous promise in accelerating breakthroughs in understanding human development, drug screening, disease modeling, and cell and gene therapies. Their potential, however, has been bottlenecked in a mostly laboratory setting due to bioprocess challenges in the scale-up of large quantities of high-quality cells for clinical and manufacturing purposes. While several studies have investigated the production of hiPSCs in bioreactors, the use of conventional horizontal-impeller, paddle, and rocking-wave mixing mechanisms have demonstrated unfavorable hydrodynamic environments for hiPSC growth and quality maintenance. This study focused on using computational fluid dynamics (CFD) modeling to aid in characterizing and optimizing the use of vertical-wheel bioreactors for hiPSC production. METHODS: The vertical-wheel bioreactor was modeled with CFD simulation software Fluent at agitation rates between 20 and 100 rpm. These models produced fluid flow patterns that mapped out a hydrodynamic environment to guide in the development of hiPSC inoculation and in-vessel aggregate dissociation protocols. The effect of single-cell inoculation on aggregate formation and growth was tested at select CFD-modeled agitation rates and feeding regimes in the vertical-wheel bioreactor. An in-vessel dissociation protocol was developed through the testing of various proteolytic enzymes and agitation exposure times. RESULTS: CFD modeling demonstrated the unique flow pattern and homogeneous distribution of hydrodynamic forces produced in the vertical-wheel bioreactor, making it the opportune environment for systematic bioprocess optimization of hiPSC expansion. We developed a scalable, single-cell inoculation protocol for the culture of hiPSCs as aggregates in vertical-wheel bioreactors, achieving over 30-fold expansion in 6 days without sacrificing cell quality. We have also provided the first published protocol for in-vessel hiPSC aggregate dissociation, permitting the entire bioreactor volume to be harvested into single cells for serial passaging into larger scale reactors. Importantly, the cells harvested and re-inoculated into scaled-up vertical-wheel bioreactors not only maintained consistent growth kinetics, they maintained a normal karyotype and pluripotent characterization and function. CONCLUSIONS: Taken together, these protocols provide a feasible solution for the culture of high-quality hiPSCs at a clinical and manufacturing scale by overcoming some of the major documented bioprocess bottlenecks.

Stirred suspension bioreactors maintain naïve pluripotency of human pluripotent stem cells.

Due to their ability to standardize key physiological parameters, stirred suspension bioreactors can potentially scale the production of quality-controlled pluripotent stem cells (PSCs) for cell therapy application. Because of differences in bioreactor expansion efficiency between mouse (m) and human (h) PSCs, we investigated if conversion of hPSCs, from the conventional "primed" pluripotent state towards the "naïve" state prevalent in mPSCs, could be used to enhance hPSC production. Through transcriptomic enrichment of mechano-sensing signaling, the expression of epigenetic regulators, metabolomics, and cell-surface protein marker analyses, we show that the stirred suspension bioreactor environment helps maintain a naïve-like pluripotent state. Our research corroborates that converting hPSCs towards a naïve state enhances hPSC manufacturing and indicates a potentially important role for the stirred suspension bioreactor's mechanical environment in maintaining naïve-like pluripotency.

Optimized serial expansion of human induced pluripotent stem cells using low-density inoculation to generate clinically relevant quantities in vertical-wheel bioreactors.

Human induced pluripotent stem cells (hiPSCs) have generated a great deal of attention owing to their capacity for self-renewal and differentiation into the three germ layers of the body. Their discovery has facilitated a new era in biomedicine for understanding human development, drug screening, disease modeling, and cell therapy while reducing ethical issues and risks of immune rejection associated with traditional embryonic stem cells. Bioreactor-based processes have been the method of choice for the efficient expansion and differentiation of stem cells in controlled environments. Current protocols for the expansion of hiPSCs use horizontal impeller, paddle, or rocking wave mixing method bioreactors which require large static cell culture starting populations and achieve only moderate cell fold increases. This study focused on optimizing inoculation, agitation, oxygen, and nutrient availability for the culture of hiPSCs as aggregates in single-use, low-shear, vertical-wheel bioreactors. Under optimized conditions, we achieved an expansion of more than 30-fold in 6 days using a small starting population of cells and minimal media resources throughout. Importantly, we showed that that this optimized bioreactor expansion protocol could be replicated over four serial passages resulting in a cumulative cell expansion of 1.06E6-fold in 28 days. Cells from the final day of the serial passage were of high quality, maintaining a normal karyotype, pluripotent marker staining, and the ability to form teratomas in vivo. These findings demonstrate that a vertical-wheel bioreactor-based bioprocess can provide optimal conditions for efficient, rapid generation of high-quality hiPSCs to meet the demands for clinical manufacturing of therapeutic cell products.

Using computational fluid dynamics (CFD) modeling to understand murine embryonic stem cell aggregate size and pluripotency distributions in stirred suspension bioreactors.

Computational fluid dynamics (CFD) modeling can be applied to understand hydrodynamics in stirred suspension bioreactors, which can in turn affect cell viability, proliferation, pluripotency and differentiation. In this study, we developed a CFD model to determine the effects of average shear rates and turbulent eddies on the formation and growth of murine embryonic stem cell aggregates. We found a correlation between average eddy size and aggregate size, which depended on bioreactor agitation rates. By relating these computational and biological variables, CFD modeling can predict optimal agitation rates to grow embryonic stem cell aggregates in stirred suspension bioreactors. To examine the effect of hydrodynamics on pluripotency, mESCs cultured in bioreactors under various agitation rates were tested for SSEA-1, Sox-2, and Nanog expression. Cells maintained a minimum of 95% positive expression with no change in the intensity distribution pattern between the different bioreactor conditions. This indicates that the average level of pluripotency marker expression is independent of changes in the hydrodynamic profile and resulting aggregate size distribution. The findings here can be further extended to other cell types that grow as aggregates in stirred suspension bioreactors and offer important insights necessary to realize cell therapies.

Improved expansion of equine cord blood derived mesenchymal stromal cells by using microcarriers in stirred suspension bioreactors.

Equine mesenchymal stromal cells (MSCs) are increasingly investigated for their clinical therapeutic utility. Such cell-based treatments can require cell numbers in the millions or billions, with conventional expansion methods using static T-flasks typically inefficient in achieving these cell numbers. Equine cord blood-derived MSCs (eCB-MSCs), are promising cell candidates owing to their capacity for chondrogenic differentiation and immunomodulation. Expansion of eCB-MSCs in stirred suspension bioreactors with microcarriers as an attachment surface has the potential to generate clinically relevant numbers of cells while decreasing cost, time and labour requirements and increasing reproducibility and yield when compared to static expansion. As eCB-MSCs have not yet been expanded in stirred suspension bioreactors, a robust protocol was required to expand these cells using this method. This study outlines the development of an expansion bioprocess, detailing the inoculation phase, expansion phase, and harvesting phase, followed by phenotypic and trilineage differentiation characterization of two eCB-MSC donors. The process achieved maximum cell densities up to 75,000 cells/cm2 corresponding to 40 million cells in a 100 mL bioreactor, with a harvesting efficiency of up to 80%, corresponding to a yield of 32 million cells from a 100 mL bioreactor. When compared to cells grown in static T-flasks, bioreactor-expanded eCB-MSC cultures did not change in surface marker expression or trilineage differentiation capacity. This indicates that the bioreactor expansion process yields large quantities of eCB-MSCs with similar characteristics to conventionally grown eCB-MSCs.

GPIHBP1 autoantibodies in a patient with unexplained chylomicronemia.

BACKGROUND: GPIHBP1, a glycolipid-anchored protein of capillary endothelial cells, binds lipoprotein lipase (LPL) in the interstitial spaces and transports it to the capillary lumen. GPIHBP1 deficiency prevents LPL from reaching the capillary lumen, resulting in low intravascular LPL levels, impaired intravascular triglyceride processing, and severe hypertriglyceridemia (chylomicronemia). A recent study showed that some cases of hypertriglyceridemia are caused by autoantibodies against GPIHBP1 ("GPIHBP1 autoantibody syndrome"). OBJECTIVE: Our objective was to gain additional insights into the frequency of the GPIHBP1 autoantibody syndrome in patients with unexplained chylomicronemia. METHODS: We used enzyme-linked immunosorbent assays to screen for GPIHBP1 autoantibodies in 33 patients with unexplained chylomicronemia and then used Western blots and immunocytochemistry studies to characterize the GPIHBP1 autoantibodies. RESULTS: The plasma of 1 patient, a 36-year-old man with severe hypertriglyceridemia, contained GPIHBP1 autoantibodies. The autoantibodies, which were easily detectable by Western blot, blocked the ability of GPIHBP1 to bind LPL. The plasma levels of LPL mass and activity were low. The patient had no history of autoimmune disease, but his plasma was positive for antinuclear antibodies. CONCLUSIONS: One of 33 patients with unexplained chylomicronemia had the GPIHBP1 autoantibody syndrome. Additional studies in large lipid clinics will be helpful for better defining the frequency of this syndrome and for exploring the best strategies for treatment.

Mutating a conserved cysteine in GPIHBP1 reduces amounts of GPIHBP1 in capillaries and abolishes LPL binding.

Mutation of conserved cysteines in proteins of the Ly6 family cause human disease-chylomicronemia in the case of glycosylphosphatidylinositol-anchored HDL binding protein 1 (GPIHBP1) and paroxysmal nocturnal hemoglobinuria in the case of CD59. A mutation in a conserved cysteine in CD59 prevented the protein from reaching the surface of blood cells. In contrast, mutation of conserved cysteines in human GPIHBP1 had little effect on GPIHBP1 trafficking to the surface of cultured CHO cells. The latter findings were somewhat surprising and raised questions about whether CHO cell studies accurately model the fate of mutant GPIHBP1 proteins in vivo. To explore this concern, we created mice harboring a GPIHBP1 cysteine mutation (p.C63Y). The p.C63Y mutation abolished the ability of mouse GPIHBP1 to bind LPL, resulting in severe chylomicronemia. The mutant GPIHBP1 was detectable by immunohistochemistry on the surface of endothelial cells, but the level of expression was ∼70% lower than in WT mice. The mutant GPIHBP1 protein in mouse tissues was predominantly monomeric. We conclude that mutation of a conserved cysteine in GPIHBP1 abolishes the ability of GPIHBP1 to bind LPL, resulting in mislocalization of LPL and severe chylomicronemia. The mutation reduced but did not eliminate GPIHBP1 on the surface of endothelial cells in vivo.