ABSTRACT
Pancreatitis is a life-threatening inflammatory disease of the pancreas. In 2019, 34.8 out of 100 000 people suffered from acute pancreatitis globally. In humans, the level of α-amylase increases three times the normal value during pancreatitis. α-Amylase is an enzyme that hydrolyses α-1,4 glycosidic bonds of starch. In this study, we investigated a novel distance-based sensing method. We exploited the existing starch triiodide method, where the blue colour of starch-triiodide fades away and becomes colourless when α-amylase breaks the starch chain at the α-1-4 glycosidic bond. A hydrophilic channel was made on paper using a simple laser printer to create hydrophobic barriers. This channel was impregnated with starch triiodide, where α-amylase can turn it colourless. This distance covered by the change in colour is directly proportional to the concentration of α-amylase in a sample. Simulated samples with different concentrations of porcine α-amylase and pancreatin were used for testing using the developed paper-based chemometer device. The paper-based chemometer device was also tested with artificial blood serum with different concentrations of α-amylase. The R 2 of this device was found to be 0.9905, and the accuracy of the device when compared with a 2-chloro-4-nitrophenyl-α-d-maltotrioside method was found to be 95.54% with a sensitivity of 0.131 U L-1 mm-1. Correlation test also showed that the paper-based chemometer device for α-amylase can be used as a testing device for artificial blood serum. This is a preliminary investigation that shows promising results. The chemometer devices stored in air-tight packets at 4-8 °C in a refrigerator did not lose the colour intensity until day 90 and retained an accuracy of 94.5%. However, the device needs to be evaluated in clinical settings prior to using it for measuring α-amylase in patients.
ABSTRACT
One of the most common problems many babies encounter is neonatal jaundice. The symptoms are yellowing of the skin or eyes because of bilirubin (from above 2.0 to 2.5 mg/dL in the blood). If left untreated, it can lead to serious neurological complications. Traditionally, jaundice detection has relied on invasive blood tests, but developing non-invasive biosensors has provided an alternative approach. This systematic review aims to assess the advancement of these biosensors. This review discusses the many known invasive and non-invasive diagnostic modalities for detecting neonatal jaundice and their limitations. It also notes that the recent research and development on non-invasive biosensors for neonatal jaundice diagnosis is still in its early stages, with the majority of investigations being in vitro or at the pre-clinical level. Non-invasive biosensors could revolutionize neonatal jaundice detection; however, a number of issues still need to be solved before this can happen. These consist of in-depth validation studies, affordable and user-friendly gadgets, and regulatory authority approval. To create biosensors that meet regulatory requirements, additional research is required to make them more precise and affordable.
Subject(s)
Biosensing Techniques , Jaundice, Neonatal , Humans , Jaundice, Neonatal/diagnosis , Infant, Newborn , Bilirubin/analysisABSTRACT
Three-dimensional (3D) printing in tissue engineering and biosensing of analytes by using biocompatible materials or modifying surface structures is an upcoming area of study. This review discusses three common surface modification techniques, viz. alkaline hydrolysis, UV light photografting, and plasma treatment. Alkaline hydrolysis involves the reaction of an alkaline solution with the surface of a material, causing the surface to develop carboxyl and hydroxyl groups. This technique can enhance the biocompatibility, surface wettability, adhesion, printability, and dyeability of materials, such as acrylonitrile butadiene styrene (ABS), polycarbonate, and polylactic acid (PLA). This review also mentions details about some of the surface-modified 3D-printed diagnostic devices. Although most of the devices are modified using chemical processes, there are always multiple techniques involved while designing a diagnostic device. We have, therefore, mentioned some of the devices based on the materials used instead of categorising them as per modification techniques. 3D printing helps in the design of sophisticated shapes and structures using multiple materials. They can, therefore be used even in the design of microfluidic devices that are very useful for biosensing. We have also mentioned a few materials for printing microfluidic devices.