ABSTRACT
Southern California experienced unprecedented megadrought between 2012 and 2018. During this time, Malosma laurina, a chaparral species normally resilient to single-year intense drought, developed extensive mortality exceeding 60% throughout low-elevation coastal populations of the Santa Monica Mountains. We assessed the physiological mechanisms by which the advent of megadrought predisposed M. laurina to extensive shoot dieback and whole-plant death. We found that hydraulic conductance of stem xylem (Ks, native ) was reduced seven to 11-fold in dieback adult and resprout branches, respectively. Staining of stem xylem vessels revealed that dieback plants experienced 68% solid-blockage, explaining the reduction in water transport. Following Koch's postulates, persistent isolation of a microorganism in stem xylem of dieback plants but not healthy controls indicated that the causative agent of xylem blockage was an opportunistic endophytic fungus, Botryosphaeria dothidea. We inoculated healthy M. laurina saplings with fungal isolates and compared hyphal elongation rates under well-watered, water-deficit, and carbon-deficit treatments. Relative to controls, we found that both water deficit and carbon-deficit increased hyphal extension rates and the incidence of shoot dieback.
Subject(s)
Droughts , Water , Xylem/physiology , CarbonABSTRACT
Plants can detect herbivore-induced plant volatiles (HIPVs) from their damaged neighbours and respond by enhancing or priming their defenses against future herbivore attack. Plant communication and defense priming by volatile cues has been well documented, however, the extent to which plants are able to perceive and respond to these cues across different environmental contexts remains poorly understood. We investigated how abiotic changes that modulate stomatal conductance and/or defense signalling affect the ability of maize plants to perceive HIPVs and respond by priming their defenses. During light exposure, when stomata were open and conditions allowed for defense signal biosynthesis, the individual compounds indole and (Z)-3-hexenyl acetate primed maize defenses. Neither compound primed defenses under environmental conditions that closed stomata and/or altered defense signalling. Moreover, plants were not primed when exposed to indole or (Z)-3-hexenyl acetate in darkness (while stomata were closed) and then subjected to simulated herbivory in the light, to ensure defense induction. The full blend of HIPVs primed maize defenses in light conditions but suppressed defense induction during dark exposure and wounding. These findings indicate that environmental context is important for plant communication and defense priming and suggest that stomata play a role in plant perception of HIPVs.
Subject(s)
Volatile Organic Compounds , Plants , Acetates , Herbivory , IndolesABSTRACT
PURPOSE: This article describes our experience in implementation of superficial radiation therapy (SRT) using SRT-100 Vision™ for non-melanoma skin cancer. METHODS: Following the American Association of Physicists in Medicine Task Group-61 protocol, absolute output (absorbed dose to water at surface (cGy/min)) was measured for three energies (50, 70, and 100 kV) and for six applicators (1.5-5.0 cm in diameter). Percent depth dose (PDD) and profiles were also measured. Timer testing and ultrasound testing were performed. A treatment time calculation worksheet was created. Quality assurance (QA) of SRT-100 Vision was implemented. After treatment workflow for our clinic was developed, end-to-end (E2E) testing was performed using a Rando phantom. Considerations for treatment using SRT-100 Vision were made. RESULTS: Absolute output (cGy/min) decreases as energy increases and applicator size decreases. Due to scatter from the applicator, PDD at depths ≤5 mm does not follow conventional trends but PDD at depths ≥15 mm increases with increasing applicator size. Profiles for the 5 cm applicator do not have strong dependence on depth except profiles at 5 mm for 50 kV. Timer/end errors are negligible for all three energies. Ultrasound images confirm allowed field of view and depth as well as no image artifacts and spatial integrity. Daily, monthly and annual QA of SRT-100 Vision implemented in our clinic is listed in a table format. E2E testing results (<1%) demonstrate the functionality and performance of our treatment workflow. Our considerations for SRT treatment include patient, applicator size and energy selections, patient setup, and shields. CONCLUSIONS: This article is expected to serve as guidance for Radiation Oncology and/or Dermatology clinics aspiring to initiate an SRT program in their clinics.
Subject(s)
Radiation Oncology , Skin Neoplasms , Humans , Radiotherapy Dosage , Phantoms, Imaging , Skin Neoplasms/radiotherapy , Radiometry/methodsABSTRACT
The purpose of this report is to provide detailed guidance on the dosimetry of the INTRABEAM® (Carl Zeiss Medical AG, Jena, Germany) electronic brachytherapy (eBT) system as it stands at the present time. This report has been developed by the members of American Association of Physicists in Medicine (AAPM) Task Group 292 and endorsed by the AAPM. Members of AAPM Task Group 292 on Electronic-Brachytherapy Dosimetry have reviewed pertinent publications and user manuals regarding the INTRABEAM system dosimetry and manufacturer-supplied dose calculation protocols. Formal written correspondence with Zeiss has also provided further clarification. Dose-rate calculations for the INTRABEAM system are highly dependent on choice of dosimetry protocol. Even with careful protocol selection, large uncertainties remain due to the incomplete characterization of the ionization chambers used for verification with respect to their energy dependence as well as manufacturing variations. There are two distinct sets of dose-rate data provided by Zeiss for the INTRABEAM system. One dataset (Calibration V4.0) is representative of the physical dose surrounding the source and the other dataset (TARGIT) has been adjusted to be consistent with a clinical trial named TARGIT (TARGeted Intraoperative RadioTherapy). The adjusted TARGIT doses are quite dissimilar to the physical doses, with differences ranging from 14% to 30% at the surface of a spherical applicator, depending on its diameter, and up to a factor of two at closer distances with the smaller needle applicators. In addition, ion chamber selection and associated manufacturing tolerances contribute to significant additional uncertainties. With these substantial differences in dose rates and their associated uncertainties, it is important for users to be aware of how each value is calculated and whether it is appropriate to be used for the intended treatment. If users intend to deliver doses that are the same as they were in 1998 at the onset of the TARGIT trial, then the TARGIT dose-rate tables should be used. The Calibration V4.0 dose rates may be more appropriate to use for applications other than TARGIT trial treatments, since they more closely represent the physical doses being delivered. Users should also be aware of the substantial uncertainties associated with the provided dose rates, which are due to beam hardening, chamber geometry, and selection of the point-of-measurement for a given ionization chamber. This report serves to describe the details and implications of the manufacturer-recommended dosimetry formalism for users of the INTRABEAM system.
Subject(s)
Brachytherapy , Calibration , Electronics , Germany , Radiometry , Radiotherapy Dosage , United StatesABSTRACT
Desiccation-tolerant (DT) organisms can lose nearly all their water without dying. Desiccation tolerance allows organisms to survive in a nearly completely dehydrated, dormant state. At the cellular level, sugars and proteins stabilize cellular components and protect them from oxidative damage. However, there are few studies of the dynamics and drivers of whole-plant recovery in vascular DT plants. In vascular DT plants, whole-plant desiccation recovery (resurrection) depends not only on cellular rehydration, but also on the recovery of organs with unequal access to water. In this study, in situ natural and artificial irrigation experiments revealed the dynamics of desiccation recovery in two DT fern species. Organ-specific irrigation experiments revealed that the entire plant resurrected when water was supplied to roots, but leaf hydration alone (foliar water uptake) was insufficient to rehydrate the stele and roots. In both species, pressure applied to petioles of excised desiccated fronds resurrected distal leaf tissue, while capillarity alone was insufficient to resurrect distal pinnules. Upon rehydration, sucrose levels in the rhizome and stele dropped dramatically as starch levels rose, consistent with the role of accumulated sucrose as a desiccation protectant. These findings provide insight into traits that facilitate desiccation recovery in dryland ferns associated with chaparral vegetation of southern California.
Subject(s)
Plant Roots/physiology , Pteridaceae/physiology , Water/physiology , Desiccation , Rain , Sucrose/metabolismABSTRACT
The persistence of college students in STEM majors after their first-year of college is approximately 50%, with underrepresented populations displaying even higher rates of departure. For many undergraduates, their first-year in college is defined by large class sizes, poor access to research faculty, and minimal standing in communities of scholars. Pepperdine University and Whittier College, funded by a National Science Foundation award to Improve Undergraduate Stem Education (NSF IUSE), partnered in the development of first-year classes specifically geared to improve student persistence in STEM and academic success. This Students as Scholars Program (SAS) engaged first-year undergraduates in scholarly efforts during their first semester in college with a careful approach to original research design and mentoring by both faculty and upperclassmen experienced in research. Courses began by introducing hypothesis formulation and experimental design partnered with the scientific focus of each course (ecological, biochemical, microbiological). Students split into research teams, explored the primary literature, designed research projects, and executed experiments over a 6-7 week period, collecting, analyzing, and interpreting data. Microbiology-specific projects included partnerships with local park managers to assess water quality and microbial coliform contamination at specified locations in a coastal watershed. In addition, students explored the impact of soil salinity on microbial community structure. Analysis of these samples included next-generation sequencing and microbiome compositional analysis via collaboration with students from an upper division microbiology course. This cross-course collaboration facilitated additional student mentoring opportunities between upperclassmen and first-year students. This approach provided first-year students an introduction to the analysis of complex data sets using bioinformatics and statistically reliable gas-exchange replicates. Assessment of the impact of this program revealed students to view the research as challenging, but confidence building as they take their first steps as biology majors. In addition, the direct mentorship of first-year students by upperclassmen and faculty was viewed positively by students. Ongoing assessments have revealed SAS participants to display a 15% increased persistence rate in STEM fields when compared to non-SAS biology majors.
ABSTRACT
Desiccation-tolerant (DT) plants can dry past -100 MPa and subsequently recover function upon rehydration. Vascular DT plants face the unique challenges of desiccating and rehydrating complex tissues without causing structural damage. However, these dynamics have not been studied in intact DT plants. We used high resolution micro-computed tomography (microCT), light microscopy, and fluorescence microscopy to characterize the dynamics of tissue desiccation and rehydration in petioles (stipes) of intact DT ferns. During desiccation, xylem conduits in stipes embolized before cellular dehydration of living tissues within the vascular cylinder. During resurrection, the chlorenchyma and phloem within the stipe vascular cylinder rehydrated before xylem refilling. We identified unique stipe traits that may facilitate desiccation and resurrection of the vascular system, including xylem conduits containing pectin (which may confer flexibility and wettability); chloroplasts within the vascular cylinder; and an endodermal layer impregnated with hydrophobic substances that impede apoplastic leakage while facilitating the upward flow of water within the vascular cylinder. Resurrection ferns are a novel system for studying extreme dehydration recovery and embolism repair in the petioles of intact plants. The unique anatomical traits identified here may contribute to the spatial and temporal dynamics of water movement observed during desiccation and resurrection.
Subject(s)
Adaptation, Physiological , Desiccation , Ferns/physiology , Plant Leaves/physiology , Water , X-Ray Microtomography , Dehydration , Plant Vascular Bundle/anatomy & histologyABSTRACT
Given increasing water deficits across numerous ecosystems world-wide, it is urgent to understand the sequence of failure of leaf function during dehydration. We assessed dehydration-induced losses of rehydration capacity and maximum quantum yield of the photosystem II (Fv /Fm ) in the leaves of 10 diverse angiosperm species, and tested when these occurred relative to turgor loss, declines of stomatal conductance gs , and hydraulic conductance Kleaf , including xylem and outside xylem pathways for the same study plants. We resolved the sequences of relative water content and leaf water potential Ψleaf thresholds of functional impairment. On average, losses of leaf rehydration capacity occurred at dehydration beyond 50% declines of gs , Kleaf and turgor loss point. Losses of Fv /Fm occurred after much stronger dehydration and were not recovered with leaf rehydration. Across species, tissue dehydration thresholds were intercorrelated, suggesting trait co-selection. Thresholds for each type of functional decline were much less variable across species in terms of relative water content than Ψleaf . The stomatal and leaf hydraulic systems show early functional declines before cell integrity is lost. Substantial damage to the photochemical apparatus occurs at extreme dehydration, after complete stomatal closure, and seems to be irreversible.
Subject(s)
Photochemical Processes , Plant Stomata/cytology , Plant Stomata/physiology , Water , Adaptation, Physiological , Chlorophyll/metabolism , Dehydration , Droughts , Fluorescence , Magnoliopsida/physiology , Photosystem II Protein Complex/metabolism , Quantum TheoryABSTRACT
PREMISE OF THE STUDY: California experienced severe drought between 2012 and 2016. During this period, we compared seasonal changes in tissue-water relations among eight fern species in the Santa Monica Mountains of southern California to elucidate differential mechanisms of drought survival and physiological performance during extreme water deficits. METHODS: We monitored seasonal changes in water potential (Ψmd) and dark-adapted chlorophyll fluorescence (Fv/Fm), assessed tissue-water relations including osmotic potential at saturation and the turgor loss point (Ψπ, sat and Ψπ, tlp), and measured, for two evergreen species, xylem-specific and leaf-specific hydraulic conductivity (Ks and Kl) and vulnerability of stem xylem to water stress-induced embolism (water potential at 50% loss hydraulic conductivity, Ψ50). KEY RESULTS: Species grew in either riparian or chaparral understory. The five chaparral species had a wider range of seasonal water potentials, root depths, and frond phenological traits, including one evergreen, two summer-deciduous, and two desiccation-tolerant (resurrection) species. Evergreen species were especially diverse, with an evergreen riparian species maintaining seasonal water potentials above -1.3 MPa, while an evergreen chaparral species had seasonal water potentials below -8 MPa. In those two species the Ψ50 values were -2.5 MPa and -4.3 MPa, respectively. CONCLUSIONS: Observed differences in physiological performance among eight fern species reflected niche partitioning in water utilization and habitat preference associated with distinct phenological traits. We predict differential survival among fern species as future drought events in California intensify, with desiccation-tolerant resurrection ferns being the most resistant.
Subject(s)
Climate Change , Droughts , Ferns/metabolism , California , Desiccation , Ecosystem , Seasons , Species Specificity , Water/metabolismABSTRACT
Chaparral is the most abundant vegetation type in California and current climate change models predict more frequent and severe droughts that could impact plant community structure. Understanding the factors related to species-specific drought mortality is essential to predict such changes. We predicted that life history type, hydraulic traits, and plant size would be related to the ability of species to survive drought. We evaluated the impact of these factors in a mature chaparral stand during the drought of 2014, which has been reported as the most severe in California in the last 1,200 years. We measured tissue water potential, native xylem specific conductivity, leaf specific conductivity, percentage loss in conductivity, and chlorophyll fluorescence for 11 species in February 2014, which was exceptionally dry following protracted drought. Mortality among the 11 dominant species ranged from 0 to 93%. Total stand density was reduced 63.4% and relative dominance of species shifted after the drought. Mortality was negatively correlated with water potential, native xylem specific conductivity, and chlorophyll fluorescence, but not with percent loss in hydraulic conductivity and leaf specific conductivity. The model that best explained mortality included species and plant size as main factors and indicated that larger plants had greater survival for 2 of the species. In general, species with greater resistance to water-stress induced cavitation showed greater mortality levels. Despite adult resprouters typically being more vulnerable to cavitation, results suggest that their more extensive root systems enable them to better access soil moisture and avoid harmful levels of dehydration. These results are consistent with the hypothesis that short-term high intensity droughts have the strongest effect on mature plants of shallow-rooted dehydration tolerant species, whereas deep-rooted dehydration avoiding species fare better in the short-term. Severe droughts can drive changes in chaparral structure as a result of the differential mortality among species.
Subject(s)
Droughts , California , Chlorophyll/metabolism , Plant Leaves/metabolism , Plant Stems/metabolism , Plant Stems/physiology , Plant Transpiration/physiology , Xylem/metabolism , Xylem/physiologyABSTRACT
Water plays a central role in plant biology and the efficiency of water transport throughout the plant affects both photosynthetic rate and growth, an influence that scales up deterministically to the productivity of terrestrial ecosystems. Moreover, hydraulic traits mediate the ways in which plants interact with their abiotic and biotic environment. At landscape to global scale, plant hydraulic traits are important in describing the function of ecological communities and ecosystems. Plant hydraulics is increasingly recognized as a central hub within a network by which plant biology is connected to palaeobiology, agronomy, climatology, forestry, community and ecosystem ecology and earth-system science. Such grand challenges as anticipating and mitigating the impacts of climate change, and improving the security and sustainability of our food supply rely on our fundamental knowledge of how water behaves in the cells, tissues, organs, bodies and diverse communities of plants. A workshop, 'Emerging Frontiers in Plant Hydraulics' supported by the National Science Foundation, was held in Washington DC, 2015 to promote open discussion of new ideas, controversies regarding measurements and analyses, and especially, the potential for expansion of up-scaled and down-scaled inter-disciplinary research, and the strengthening of connections between plant hydraulic research, allied fields and global modelling efforts.
Subject(s)
Ecosystem , Trees/physiology , Water/physiology , Water CycleABSTRACT
Understanding and predicting plant response to disturbance is of paramount importance in our changing world. Resprouting ability is often considered a simple qualitative trait and used in many ecological studies. Our aim is to show some of the complexities of resprouting while highlighting cautions that need be taken in using resprouting ability to predict vegetation responses across disturbance types and biomes. There are marked differences in resprouting depending on the disturbance type, and fire is often the most severe disturbance because it includes both defoliation and lethal temperatures. In the Mediterranean biome, there are differences in functional strategies to cope with water deficit between resprouters (dehydration avoiders) and nonresprouters (dehydration tolerators); however, there is little research to unambiguously extrapolate these results to other biomes. Furthermore, predictions of vegetation responses to changes in disturbance regimes require consideration not only of resprouting, but also other relevant traits (e.g. seeding, bark thickness) and the different correlations among traits observed in different biomes; models lacking these details would behave poorly at the global scale. Overall, the lessons learned from a given disturbance regime and biome (e.g. crown-fire Mediterranean ecosystems) can guide research in other ecosystems but should not be extrapolated at the global scale.
Subject(s)
Germination , Internationality , Droughts , Models, Biological , PlantsABSTRACT
PURPOSE: The model S700 Axxent electronic brachytherapy source by Xoft, Inc., was characterized by Rivard et al. in 2006. Since then, the source design was modified to include a new insert at the source tip. Current study objectives were to establish an accurate source model for simulation purposes, dosimetrically characterize the new source and obtain its TG-43 brachytherapy dosimetry parameters, and determine dose differences between the original simulation model and the current model S700 source design. METHODS: Design information from measurements of dissected model S700 sources and from vendor-supplied CAD drawings was used to aid establishment of an updated Monte Carlo source model, which included the complex-shaped plastic source-centering insert intended to promote water flow for cooling the source anode. These data were used to create a model for subsequent radiation transport simulations in a water phantom. Compared to the 2006 simulation geometry, the influence of volume averaging close to the source was substantially reduced. A track-length estimator was used to evaluate collision kerma as a function of radial distance and polar angle for determination of TG-43 dosimetry parameters. Results for the 50 kV source were determined every 0.1 cm from 0.3 to 15 cm and every 1° from 0° to 180°. Photon spectra in water with 0.1 keV resolution were also obtained from 0.5 to 15 cm and polar angles from 0° to 165°. Simulations were run for 10(10) histories, resulting in statistical uncertainties on the transverse plane of 0.04% at r = 1 cm and 0.06% at r = 5 cm. RESULTS: The dose-rate distribution ratio for the model S700 source as compared to the 2006 model exceeded unity by more than 5% for roughly one quarter of the solid angle surrounding the source, i.e., θ ≥ 120°. The radial dose function diminished in a similar manner as for an (125)I seed, with values of 1.434, 0.636, 0.283, and 0.0975 at 0.5, 2, 5, and 10 cm, respectively. The radial dose function ratio between the current and the 2006 model had a minimum of 0.980 at 0.4 cm, close to the source sheath and for large distances approached 1.014. 2D anisotropy function ratios were close to unity for 50° ≤ θ ≤ 110°, but exceeded 5% for θ < 40° at close distances to the sheath and exceeded 15% for θ > 140°, even at large distances. Photon energy fluence of the updated model as compared to the 2006 model showed a decrease in output with increasing distance; this effect was pronounced at the lowest energies. A decrease in photon fluence with increase in polar angle was also observed and was attributed to the silver epoxy component. CONCLUSIONS: Changes in source design influenced the overall dose rate and distribution by more than 2% in several regions. This discrepancy is greater than the dose calculation acceptance criteria as recommended in the AAPM TG-56 report. The effect of the design change on the TG-43 parameters would likely not result in dose differences outside of patient applicators. Adoption of this new dataset is suggested for accurate depiction of model S700 source dose distributions.
Subject(s)
Brachytherapy/instrumentation , Electrical Equipment and Supplies , Plastics , Anisotropy , Electrodes , Epoxy Compounds , Monte Carlo Method , Photons , Radiometry , Uncertainty , WaterABSTRACT
While commissioning Varian's Portal Dose Image Prediction (PDIP) algorithm for portal dosimetry, an asymmetric radial response in the portal imager due to backscatter from the support arm was observed. This asymmetric response led to differences on the order of 2%-3% for simple square fields (< 20 × 20 cm2) when comparing the measured to predicted portal fluences. A separate problem was that discrepancies of up to 10% were seen in measured to predicted portal fluences at increasing off-axis distance (> 10 cm). We have modified suggested methods from the literature to provide a 1D correction for the off-axis response problem which adjusts the diagonal profile used in the portal imager calibration. This inherently cannot fix the 2D problem since the PDIP algorithm assumes a radially symmetric response and will lead to some uncertainty in portal dosimetry results. Varian has recently released generic "2D correction" files with their Portal Dosimetry Pre-configuration (PDPC) package, but no independent testing has been published. We present the comparison between QA results using the Varian correction method to results using our 1D profile correction method using the gamma passing rates with a 3%, 3 mm criterion. The average, minimum, and maximum gamma pass rates for nine fixed-field IMRT fields at gantry 0° using our profile correction method were 98.1%, 93.7%, and 99.8%, respectively, while the results using the PDPC correction method were 98.4%, 93.1%, and 99.8%. For four RapidArc fields, the average, minimum, and maximum gamma pass rates using our correction method were 99.6%, 99.4%, and 99.9%, respectively, while the results using the PDPC correction method were 99.8%, 99.5%, and 99.9%. The average gamma pass rates for both correction methods are quite similar, but both show improvement over the uncorrected results.
Subject(s)
Algorithms , Image Processing, Computer-Assisted/instrumentation , Radiometry/instrumentation , Radiotherapy Planning, Computer-Assisted/instrumentation , Radiotherapy, Intensity-Modulated , Calibration , Humans , Radiotherapy DosageABSTRACT
Image-guided radiation therapy using cone-beam computed tomography (CBCT) is becoming routine practice in modern radiation therapy. The purpose of this work was to develop an imaging QA program for CT and CBCT units in our department, based on the American College of Radiology (ACR) CT accreditation phantom. The phantom has four testing modules, permitting one to test CT number accuracy, slice width, low contrast resolution, image uniformity, in-plane distance accuracy, and high-contrast resolution reproducibly with suggested window/levels for image analysis. Additional tests for contrast-to-noise ratio (CNR) and noise were added using the polyethylene and acrylic plugs. Baseline values were obtained from CT simulator images acquired on a Phillips Brilliance Big Bore CT simulator and CBCT images acquired on three Varian CBCTs for the imaging protocols most used clinically. Images were then acquired quarterly over a period of two years. Images were exported via DICOM and analyzed manually using OsiriX. Baseline values were used to ensure that image quality remained consistent quarterly, and baselines were reset at any major maintenance or recalibration. Analysis of CT simulator images showed that image quality was within ACR guidelines for all tested scanning protocols. All three CBCT systems were unable to distinguish the low-contrast resolution plugs and had the same high-contrast resolution over all imaging protocols. Analysis of CBCT results over time determined a range of values that could be used to establish quantitative tolerance levels for image quality deterioration. While appropriate for the helical CT, the ACR phantom and guidelines could be modified to be more useful in evaluating CBCT systems. In addition, the observed values for the CT simulator were well within ACR tolerances.
Subject(s)
Accreditation , Cone-Beam Computed Tomography/standards , Image Processing, Computer-Assisted , Phantoms, Imaging , Quality Assurance, Health Care/standards , Radiotherapy, Image-Guided/standards , Tomography, X-Ray Computed/standards , Algorithms , Cone-Beam Computed Tomography/methods , Humans , Radiotherapy, Image-Guided/methods , Tomography, X-Ray Computed/methodsABSTRACT
PURPOSE: To describe our experience with a novel technique for total skin irradiation using helical TomoTherapy (Accuray, Sunnyvale, CA). METHODS AND MATERIALS: An infant with refractory acute myelogenous leukemia with extensive cutaneous involvement was given total skin irradiation using inverse-planned helical tomotherapy. Quality assurance tests to determine the deliverability of the technique and the accuracy of dose estimation at the superficial skin level were devised and performed. Daily megavoltage imaging, tomotherapy plan adaptive evaluation, in vivo skin dose measurements, and cumulative dose summation were tools employed to assess the quality of treatment and positioning reproducibility on a daily basis. RESULTS: The quality assurance checks showed that tomotherapy can indeed be used for total skin irradiation in cases where conventional electron treatment delivery is not possible. However, the overestimation of absorbed dose near surface by the treatment planning software must be quantified and taken into account using in-phantom and in vivo dosimetry techniques with appropriate detectors. Daily imaging allows for superior positioning, while daily plan adaptive and dose summations based on the plan adaptive calculations allow for evaluation of the treatment delivery. CONCLUSIONS: An infant has been treated successfully using helical TomoTherapy for total skin irradiation prior to allogeneic stem cell transplant. The course of treatment was uncomplicated and the patient is doing well more than 15 months following therapy.
Subject(s)
Exanthema/radiotherapy , Radiotherapy Planning, Computer-Assisted , Radiotherapy, Intensity-Modulated , Humans , Infant , Male , Organs at Risk , Patient Positioning , Phantoms, Imaging , Prognosis , Radiotherapy Dosage , SoftwareABSTRACT
PURPOSE: To measure the 2D dose distributions with submillimeter resolution for (131)Cs (model CS-1 Rev2) and (125)I (model 6711) seeds in a Solid Water phantom using radiochromic EBT film for radial distances from 0.06cm to 5cm. To determine the TG-43 dosimetry parameters in water by applying Solid Water to liquid water correction factors generated from Monte Carlo simulations. METHODS: Each film piece was positioned horizontally above and in close contact with a (131)Cs or (125)I seed oriented horizontally in a machined groove at the center of a Solid Water phantom, one film at a time. A total of 74 and 50 films were exposed to the (131)Cs and (125)I seeds, respectively. Different film sizes were utilized to gather data in different distance ranges. The exposure time varied according to the seed air-kerma strength and film size in order to deliver doses in the range covered by the film calibration curve. Small films were exposed for shorter times to assess the near field, while larger films were exposed for longer times in order to assess the far field. For calibration, films were exposed to either 40kV (M40) or 50kV (M50) x-rays in air at 100.0cm SSD with doses ranging from 0.2Gy to 40Gy. All experimental, calibration and background films were scanned at a 0.02cmpixel resolution using a CCD camera-based microdensitometer with a green light source. Data acquisition and scanner uniformity correction were achieved with Microd3 software. Data analysis was performed using ImageJ, FV, IDL and Excel software packages. 2D dose distributions were based on the calibration curve established for 50kV x-rays. The Solid Water to liquid water medium correction was calculated using the MCNP5 Monte Carlo code. Subsequently, the TG-43 dosimetry parameters in liquid water medium were determined. RESULTS: Values for the dose-rate constants using EBT film were 1.069±0.036 and 0.923±0.031cGyU(-1)h(-1) for (131)Cs and (125)I seed, respectively. The corresponding values determined using the Monte Carlo method were 1.053±0.014 and 0.924±0.016cGyU(-1)h(-1) for (131)Cs and (125)I seed, respectively. The radial dose functions obtained with EBT film measurements and Monte Carlo simulations were plotted for radial distances up to 5cm, and agreed within the uncertainty of the two methods. The 2D anisotropy functions obtained with both methods also agreed within their uncertainties. CONCLUSION: EBT film dosimetry in a Solid Water phantom is a viable method for measuring (131)Cs (model CS-1 Rev2) and (125)I (model 6711) brachytherapy seed dose distributions with submillimeter resolution. With the Solid Water to liquid water correction factors generated from Monte Carlo simulations, the measured TG-43 dosimetry parameters in liquid water for these two seed models were found to be in good agreement with those in the literature.
Subject(s)
Brachytherapy/instrumentation , Cesium Radioisotopes/chemistry , Film Dosimetry/instrumentation , Iodine Radioisotopes/chemistry , Prostheses and Implants , Radiotherapy Planning, Computer-Assisted/methods , Biomimetic Materials/chemistry , Biomimetic Materials/radiation effects , Cesium Radioisotopes/analysis , Equipment Design , Equipment Failure Analysis , Iodine Radioisotopes/analysis , Radiation Dosage , Radiopharmaceuticals/analysis , Radiopharmaceuticals/chemistry , Reproducibility of Results , Sensitivity and Specificity , Water/chemistryABSTRACT
We examined postfire regeneration of chaparral shrubs during an intense drought. This study focused on the demography and physiology of shrub species that resprout from a basal lignotuber following fire. We found significant levels of resprout mortality when intense drought occurred in the year following fire during the period of shrub recovery. Three of the seven sampled resprouting species had the greatest or near greatest levels of mortality ever recorded when compared to previous studies. Most shrub mortality occurred during the drought after individuals had resprouted (i.e. individuals survived fire, resprouted and then subsequently died). Physiological measurements of species with high mortality suggested that resprout stems were highly embolized and xylem hydraulic conductivities were close to zero during the peak of the drought. In addition, lignotubers of two of the three species experiencing high mortality were depleted of starch. Population densities of most shrub species declined after the drought compared with their prefire levels, with the exception of one drought tolerant obligate seeding species. Resprouting shrub species may deplete their carbohydrate reserves during the resprouting process, making them particularly vulnerable to drought because of the need to transpire water to acquire the CO2 that is used to supply energy to a large respiring root system. Drought appears to interact with fire by altering postfire shrub recovery and altering species abundances and composition of chaparral communities.
Subject(s)
Droughts , Fires , Plant Physiological Phenomena , California , Carbohydrate Metabolism , Plant Stomata/metabolism , Plant Tubers/metabolism , Water/metabolism , Xylem/physiologyABSTRACT
Remote afterloading devices used for high-dose-rate (HDR) brachytherapy may be supplied with different sources, and these sources typically have differing initial source strengths. In addition, the proposed frequency for source changes may also vary, depending upon the source type. Dosimetric parameters unique to each source are often used to compare source types. However, when considering the relative dosimetric efficiency between two HDR sources, the combined effect of source type, initial source strength, and source change scheme must be considered. A method of quantifying this combined effect by calculating mean dose rate from specific dosimetric source data is discussed. This method suggests an objective manner of comparing source scheme equivalency to facilitate performing a cost ratio analysis between different HDR sources and source change schemes.
Subject(s)
Brachytherapy , Cobalt Radioisotopes , Iridium Radioisotopes , Neoplasms/radiotherapy , Radiometry , Humans , Monte Carlo Method , Prognosis , Radiotherapy DosageABSTRACT
PREMISE OF THE STUDY: Microsatellite (simple sequence repeat [SSR]) markers were developed for Ceanothus megacarpus, a chaparral species endemic to coastal southern California, to investigate potential processes (e.g., fragmentation, genetic drift, and interspecific hybridization) responsible for the genetic structure within and among populations distributed throughout mainland and island populations. ⢠METHODS AND RESULTS: Four SSR-enriched libraries were used to develop and optimize 10 primer sets of microsatellite loci containing either di-, tri-, or tetranucleotide repeats. Levels of variation at these loci were assessed for two populations of C. megacarpus. Observed heterozygosity ranged from 0.250 to 0.885, and number of alleles ranged between four and 21 per locus. Eight to nine loci also successfully amplified in three other species of Ceanothus. ⢠CONCLUSIONS: These markers should prove useful for evaluating the influence of recent and historical processes on genetic variation in C. megacarpus and related species.