ABSTRACT
Aim: To assess the impact of experimental conditions on free serum concentrations as determined by ultrafiltration and HPLC-DAD analysis in a wide range of antibiotics. Materials & methods: Relative centrifugation force (RCF), temperature, pH and buffer were varied and the results compared with the standard protocol (phosphate buffer pH 7.4, 37°C, 1000 × g). Results: Generally, at 10,000 × g the unbound fraction (fu) decreased with increasing molecular weight, and was lower at 22°C. In unbuffered serum, the fu of flucloxacillin or valproic acid was increased, that of basic or amphoteric drugs considerably decreased. Comparable results were obtained using phosphate or HEPES buffer except for drugs which form metal chelate complexes. Conclusion: Maintaining a physiological pH is more important than strictly maintaining body temperature.
[Box: see text].
ABSTRACT
Accurate assessment of renal function is of great clinical and scientific importance, as it is an important pharmacokinetic covariate of pivotal drugs. The iohexol clearance is nearly identical to the glomerular filtration rate, but its determination usually requires an intravenous injection and therefore bears intrinsic risks. This motivates to showcase an "en passant" approach to quantification of renal function without additional risk or blood sampling beyond routine care using real-world data. We enrolled 37 intensive care patients who received high doses of iohexol for computed tomography imaging, and quantified series of iohexol plasma concentrations by high-performance liquid chromatography (HPLC-UV). Iohexol clearance was derived by both log-linear regression and nonlinear least squares fitting and compared to glomerular filtration rate estimated by the CKD-EPI-2021 formulas. Nonlinear fitting not only turned out to be more accurate but also more robust in handling the irregularly timed data points. Concordance of iohexol clearance against estimations based on both creatinine and cystatin C showed a slightly higher bias (-3.44 mL/min/1.73 m2) compared to estimations based on creatinine alone (-0.76 mL/min/1.73 m2), but considerably narrower limits of agreement (±42.8 vs. 56 mL/min/1.73 m2) and higher Lin's correlation (0.84 vs. 0.72). In summary, we have demonstrated the feasibility and performance of the "en passant" variant of the iohexol method in intensive care medicine and described a working protocol for its application in clinical practice and pharmacologic studies.
ABSTRACT
BACKGROUND: Scientometric analyses characterize the output of research publications using quantitative methods. While it has been reported that the number of publications in anesthesiology has been increasing for years, the global research activity in pediatric anesthesiology and its landscape is largely unknown. AIMS: To examine the activity, developmental dynamics, and collaboration landscape of research publications in pediatric anesthesiology over the past two decades. METHODS: PubMed and WebOfScience were searched for pediatric anesthesiology publications published between 2001 and 2020. The identified publications were exported into a database, matched, curated, and then assigned to one or more countries according to their affiliation field(s). The primary outcome was the publication activity and its growth rate. Secondary outcomes included the geographical distribution, the evolution of international collaborations (as indicated by articles affiliated with more than one country), and the main sources. RESULTS: Thirty-four thousand, three hundred and forty-three pediatric anesthesiology publications were retrieved. The compound annual growth rate over the study period was +7.6%. The highest annual growth rate was +20.6% from 2019 to 2020. Corresponding authors were most often affiliated with USA (32.5%), Germany (5.5%), and China (5.5%). China (+22.9%), Iran (+21.7%), and India (+16.1%) had the highest compound annual growth rates. 6001 (17.5%) articles involved international collaboration, with a compound annual growth rate of +13.1%. The most frequent collaboration was between USA and Canada (716 articles together). The most prominent source was Pediatric Anesthesia (10.0%). CONCLUSIONS: Publication activity in pediatric anesthesiology has increased from 2001 to 2020 and has become more geographically diverse. With the volume of international collaborations even outpacing this growth, it is hoped that this will gradually lead to a larger evidence base in pediatric anesthesia.
Subject(s)
Anesthesiology , Humans , Child , China , Germany , Databases, Factual , CanadaABSTRACT
OBJECTIVE: To evaluate, under replicable, blinded and standardised conditions, the effect of acute exposure to hypobaric hypoxia (HH) (equivalent to 200 or 3000 or 5000 m above sea level (asl)) on selected cognitive domains and physiological parameters in personnel of helicopter emergency medical service (HEMS). METHODS: We conducted a randomized clinical trial using a single-blind crossover design in an environmental chamber (terraXcube) to induce HH in 48 HEMS personnel. Participants performed cognitive tests (CT) before the ascent, after 5 min at altitude, and after simulated cardiopulmonary resuscitation (SCR). CT evaluated: sustained attention using the psychomotor vigilance test (PVT) that included measurement of reaction time (RT); risky decision making using the balloon analogue risk task (BART), and attention and speed of processing using the digit symbol substitution test (DSST). CT performance was subjectively rated with a visual analogue scale (VAS). Physiological data were recorded with a physiological monitoring system. Data were analysed using a linear mixed model and correlation analysis. RESULTS: Mean reaction time was significantly slower (p = 0.002) at HH (5000 m asl), but there were no independent effects of HH on the other parameters of the PVT, BART or DSST. Participants did not detect subjectively the slower RT at altitude since VAS performance results showed a positive correlation with mean RT (p = 0.009). DSST results significantly improved (p = 0.001) after SCR. CONCLUSION: Acute exposure of HEMS personnel to HH induced a slower RT but no changes in any other investigated measures of cognition. The reduced RT was not detected subjectively by the participants. Trial number 3489044136, ClinicalTrials.gov trial registration.
ABSTRACT
BACKGROUND: The ongoing SARS-COV-2 pandemic has severe implications for people and healthcare systems everywhere. In Germany, worry about the consequences of the pandemic led to the deferral of non-emergency surgeries. Tumor surgery accounts for a large volume in the field of visceral surgery and cannot be considered purely elective. It is not known how the SARS-COV-2 pandemic has changed the surgical volume in tumor patients. METHODS: Retrospective analysis of the amount of oncological surgeries in three academic visceral surgery departments in Bavaria, Germany, in 2020. Procedures were split into subgroups: Upper Gastrointestinal (Upper GI), Colorectal, Hepato-Pancreato-Biliary (HPB), Peritoneal and Endocrine. Procedures in 2020 were compared to a reference period from January 1st, 2017 to December 31st 2019. Surgical volume was graphically merged with SARS-COV-2 incidence and the number of occupied ICU beds. RESULTS: Surgical volume decreased by 7.6% from an average of 924 oncologic surgeries from 2017 to 2019 to 854 in 2020. The decline was temporally associated with the incidence of infections and ICU capacity. Surgical volume did not uniformly increase to pre-pandemic levels in the months following the first pandemic wave with lower SARS-COV-2 incidence and varied according to local incidence levels. The decline was most pronounced in colorectal surgery where procedures declined on average by 26% following the beginning of the pandemic situation. CONCLUSION: The comparison with pre-pandemic years showed a decline in oncologic surgeries in 2020, which could have an impact on lost life years in non-COVID-19 patients. This decline was very different in subgroups which could not be solely explained by the pandemic.
Subject(s)
COVID-19 , SARS-CoV-2 , Germany/epidemiology , Humans , Pandemics , Retrospective StudiesABSTRACT
Background Helicopter emergency medical services personnel operating in mountainous terrain are frequently exposed to rapid ascents and provide cardiopulmonary resuscitation (CPR) in the field. The aim of the present trial was to investigate the quality of chest compression only (CCO)-CPR after acute exposure to altitude under repeatable and standardized conditions. Methods and Results Forty-eight helicopter emergency medical services personnel were divided into 12 groups of 4 participants; each group was assigned to perform 5 minutes of CCO-CPR on manikins at 2 of 3 altitudes in a randomized controlled single-blind crossover design (200, 3000, and 5000 m) in a hypobaric chamber. Physiological parameters were continuously monitored; participants rated their performance and effort on visual analog scales. Generalized estimating equations were performed for variables of CPR quality (depth, rate, recoil, and effective chest compressions) and effects of time, altitude, carryover, altitude sequence, sex, qualification, weight, preacclimatization, and interactions were analyzed. Our trial showed a time-dependent decrease in chest compression depth (P=0.036) after 20 minutes at altitude; chest compression depth was below the recommended minimum of 50 mm after 60 to 90 seconds (49 [95% CI, 46-52] mm) of CCO-CPR. Conclusions This trial showed a time-dependent decrease in CCO-CPR quality provided by helicopter emergency medical services personnel during acute exposure to altitude, which was not perceived by the providers. Our findings suggest a reevaluation of the CPR guidelines for providers practicing at altitudes of 3000 m and higher. Mechanical CPR devices could be of help in overcoming CCO-CPR quality decrease in helicopter emergency medical services missions. Registration URL: https://www.clinicaltrials.gov; Unique identifier: NCT04138446.
Subject(s)
Aircraft , Altitude , Cardiopulmonary Resuscitation , Emergency Medical Services , Quality of Health Care , Cardiopulmonary Resuscitation/methods , Cardiopulmonary Resuscitation/standards , Cross-Over Studies , Emergency Medical Services/standards , Humans , Single-Blind MethodABSTRACT
Nowadays, the assessment of the mechanical competence of tissue engineering scaffolds based on computer simulations is a well-accepted technology. Typically, such simulations are performed by means of the Finite Element (FE) method, with the underlying structural model being created based on micro-computed tomography (microCT). Here, this analysis modality is applied to a new, ternary composite, consisting of PHBV, i.e. poly(3-hydroxybutyrate-co-3-hydroxyvalerate), PLGA, i.e. poly(lactic-co-glycolide), as well as of TCP, i.e. tricalcium phosphate hydrate. The studied scaffold structure is made up by fibers of this new composite material, manufactured by means of the rapid prototyping method. The data collected from microCT is utilized for adequately defining the mechanical properties of the FE model. In particular, the three-dimensional field of grey values is interpreted in terms of the underlying field of attenuation coefficients, taking into account the photon energy employed in microCT imaging, eventually allowing for calculation of the three-dimensionally distributed, voxel-specific composition of the studied material. For the sake of keeping the FE simulations as efficient as possible, groups of voxels are combined into one finite element; the grey value of the latter is obtained by volume averaging. Employing a two-step micromechanical homogenization scheme, the experimentally accessible stiffness of the three constituents (PHBV, PLGA, and TCP) is then, finite element by finite element, upscaled to the composition-dependent stiffness of the composite material. The plausibility and adequacy of the FE model is demonstrated by simulating the effects of uniaxial compression on the scaffold structure, in terms of resulting stress and strain fields, highlighting the importance of the fiber junctions (as they are the mechanically most stressed regions), and that neglecting the material heterogeneity would lead to a potentially significant underestimation of stresses and strains. Finally, a comparison is made of the employed analysis modality of microCT data with a previously pursued, simplified analysis strategy, highlighting the conceptual superiority of the former, and pointing out the application limits of the latter.
Subject(s)
Polylactic Acid-Polyglycolic Acid Copolymer/chemistry , Tissue Engineering/methods , Finite Element Analysis , Tissue Scaffolds/chemistry , X-Ray MicrotomographyABSTRACT
While micro-FE simulations have become a standard tool in computational biomechanics, the choice of appropriate material properties is still a relevant topic, typically involving empirical grey value-to-elastic modulus relations. We here derive the voxel-specific volume fractions of mineral, collagen, and water, from tissue-independent bilinear relations between mineral and collagen content in extracellular bone tissue (J. Theor. Biol. 287: 115, 2011), and from the measured X-ray attenuation information quantified in terms of grey values. The aforementioned volume fractions enter a micromechanics representation of bone tissue, as to deliver voxel-specific stiffness tensors. In order to check the relevance of this strategy, we convert a micro Computer Tomograph of a mouse femur into a regular Finite Element mesh, apply forces related to the dead load of a standing mouse, and then compare simulation results based on voxel-specific heterogeneous elastic properties to results based on homogeneous elastic properties related to the spatial average over the solid bone matrix compartment, of the X-ray attenuation coefficients. The element-specific strain energy density illustrates that use of homogeneous elastic properties implies overestimation of the organ stiffness. Moreover, the simulation reveals large tensile normal stresses throughout the femur neck, which may explain the mouse femur neck's trabecular morphology being quite different from the human case, where the femur neck bears compressive forces and bending moments.
Subject(s)
Collagen/metabolism , Elasticity/physiology , Femur Neck/diagnostic imaging , Femur Neck/physiology , Finite Element Analysis , Models, Biological , X-Ray Microtomography , Animals , Biomechanical Phenomena , Humans , Mice , Weight-Bearing/physiologyABSTRACT
Hundred micrometers-sized porous hydroxyapatite globules have proved as a successful tissue engineering strategy for bone defects in vivo, as was shown in studies on human mandibles. These granules need to provide enough porous space for bone ingrowth, while maintaining sufficient mechanical competence (stiffness and strength) in this highly load-bearing organ. This double challenge motivates us to scrutinize more deeply the micro- and nanomechanical characteristics of such globules, as to identify possible optimization routes. Therefore, we imaged such a (pre-cracked) granule in a microCT scanner, transformed the attenuation coefficients into voxel-specific nanoporosities, from which we determined, via polycrystal micromechanics, voxel-specific (heterogeneous) elastic properties. The importance of the latter and of the presence of one to several hundred micrometers-sized cracks for realistically estimating the load-carrying behavior of the globule under a typical two-point compressive loading (as in a "splitting" test) is shown through results of large-scale Finite Element analyses, in comparison to analytical results for a sphere loaded at its poles: Use of homogeneous instead of heterogeneous elastic properties would overestimate the structure's stiffness by 5% (when employing a micromechanics-based process as to attain homogeneous properties)-the cracks, in comparison, weaken the structure by one to two orders of magnitudes.