ABSTRACT
Practice at our Center shows that approach using 3D surface imaging for morphometric comparison of patterned injuries does not always lead to accurate conclusions. We decided to evaluate whether a selection protocol focused on analysis phase could enable us to form an early assessment of the outcome of a comparison process, and then to select lesions likely to lead to a probative conclusion. 23 blunt objects were used to create 65 patterned injuries on an experimental model simulating human skin. A blinded analysis and a comparison were conducted on photographs and 3D models of the lesions. Statement of analysis phase was consistent with comparison results in most cases, enabling correct identification of the responsible object or at least keeping it as possibly responsible among 2 to 3 objects. Our protocol has been demonstrated to improve ability to exploit patterned injuries from surface imaging, despite certain limiting factors.
ABSTRACT
3D-printed firearms, an emerging category of privately made firearms (PMF) produced beyond government control, have become increasingly prevalent due to technological advancements. They are now emerging as a cost-effective and reliable alternative to conventional firearms. Raised to public awareness following the 2013 release of the 3D-printed Liberator, these firearms are now more commonly encountered by police forces. This article analyses various reports involving 3D-printed firearms, reflecting the increasing encounters by law enforcement agencies. It examines 186 cases involving 3D-printed firearms, primarily from North America, Europe, and Oceania, highlighting a significant rise in incidents since 2021. These incidents include seizures, illicit uses, and online sales, with the firearms typically being hybrid models, Parts Kit Completions/Conversions (PKC), or firearm components such as auto sears. The study underscores the use of affordable equipment and materials for production, emphasizing the accessibility and potential risks of these firearms.
ABSTRACT
The release of the plans of the 3D-printed Liberator firearm sparked a wave of new designs from creators worldwide, resulting in an extensive collection of 3D-printed firearm plans, in particular blueprints, and parts available for almost unrestricted download on the internet. Identifying and categorizing the diverse range of 3D-printed firearms and components pose a challenge due to the abundance of designs available. Between 2021 and April 2023, data was collected on over 2,100 3D-printed firearm plans. While blueprints of fully 3D-printed firearms initially dominated the scene, hybrid designs and parts kit completions / conversions (PKC) have gained popularity for their improved reliability and performance. The now highly networked community offers considerable support with detailed instructions and procedures, providing precise guidance for construction. This systematic classification, grouping and structuration of the recorded data on the Clear Web supported the identification of patterns of the main threat trends related to 3D-printed firearms.
ABSTRACT
Deteriorated elements of ammunition can be found while investigating different types of events. Exposure to adverse environmental conditions may lead to metal alteration (corrosion) or organic material deposition (contaminations) on the exposed elements of ammunition. From a forensic perspective, both types of deterioration pose challenges when observing marks left by the firearms used to discharge the corresponding ammunition (e.g. firing pin, extractor). The longer the time of exposure to the adverse environmental conditions, the more challenging the observation of such marks. A literature review highlighted three previously published restorative methods used to clean deteriorated elements of ammunition. The aim of this research is to develop a cleaning procedure applicable to cartridge cases exposed to adverse environmental conditions, while avoiding the degradation of marks left by the firearms used to discharge the corresponding ammunition. A first batch of 21 brass cartridge cases dating back to the Second World War (WWII) was used to develop a cleaning sequence involving the three methods. The efficiency of each restorative method was qualitatively assessed using optical macroscopy and the Evofinder® ballistic identification system. The developed sequence relies on successive applications of Tickopur® TR 7 (a diluted soft metal cleaner), sulfuric acid and finally Aqua Regia (HCl 37% and HNO3 75%), all of them involving ultrasonic baths. The resulting cleaning sequence was subsequently applied to three batches of Second World War cartridge cases discovered in France and Russia. This sequential procedure allows the effective cleaning of WWII brass cartridge cases while highlighting different marks left by firing pins, extractors, ejectors, and breech faces. Applying a forensic analysis and comparison process to the marks highlighted on these elements of ammunition can support the verification of historical facts when reconstructing events which took place more than seventy years ago.
ABSTRACT
Since the blueprints of the Liberator were published and successfully tested, countless new designs for said 3D-printed firearms and 3D-printed firearm components have been created and made publicly available. These new 3D-printed firearms, which are praised by their designers as ever more reliable, can be found on the Internet with little effort. Press reports have shown that various models of 3D-printed firearms have already been confiscated by law enforcement services around the world. So far, forensic studies have addressed this set of problems relatively little, whereby for the most part only the Liberator has been examined in detail and three other designs were only included a few times. The rapid pace of this development poses new challenges for forensic investigations and unveil new spheres of investigation regarding 3D-printed firearms. This research initiative aims to determine whether the results from previous studies on Liberators, are also reproducible and observable when using other models of 3D-printed firearms. In this respect six fully 3D-printed firearms - PM422 Songbird, PM522 Washbear, TREVOR, TESSA, Marvel Revolver and Grizzly - were produced on a material extrusion type Prusa i3 MK3S using PLA as the material. Test firings of these 3D-printed firearms have shown that they are indeed functional, but that, depending on the model, they suffer different levels of damage when fired. However, they were all rendered inoperative after one discharge and could not be used for further discharges unless the broken pieces were replaced. As in other studies, the firing process and the resulting ruptures on the 3D-printed firearm, projected polymer parts and fragments of different sizes and in different quantities into the immediate environment. The parts could be physically matched, allowing the reconstruction and identification of the 3D-printed firearms. Elements of ammunition also showed traces of melted polymer on the surface and cartridge cases bore tears or swellings.
ABSTRACT
Fire incidents are amongst the most destructive events an investigator might encounter, completely transforming a scene with most of the objects left in ashes or highly damaged. Until now, fire investigations relied heavily on burn patterns and electrical artifacts to find possible starting locations, as well as witness statements and more recently witness imagery. As Internet of Things (IoT) devices, often seen as connected smart devices, become more common, the various sensors embedded within them provide a novel source of traces about the environment and events within. They collect and store information in different locations, often not touched by the event, such as remote servers (cloud) or companion smartphones, widening the investigation field for fire incidents. This work presents two controlled fire incidents in apartments that we furnished, equipped with IoT devices, and subsequently burnt. We studied the traces retrievable from the objects themselves after the incident, the companion smartphone apps, and the cloud and assessed the value of the information they conveyed. This research highlighted the pertinence to consider traces from IoT devices in the forensic process of fire investigation.
ABSTRACT
Forensic practice is the concluding practical course of the forensic science bachelor program at the School of Criminal Justice of the University of Lausanne. Learning activities are constructed around five main objectives for the resolution of simulated forensic case problems: 1) select relevant traces and items to be collected at the scene and perceive their potential value in the reconstruction process, 2) apply appropriate detection techniques in sequence to obtain clues of good quality, 3) process traces using Analysis, Comparison, Evaluation and Verification (ACE-V) methodology, 4) produce and summarise information in oral and written forms to help an investigation, and 5) work collaboratively to benefit from the diversity of group members. Simulating and supervising realistic activities is a complex task that became more and more challenging with a continuously increasing number of students over the years (from ca. 30 in 2016 to more than 60 in 2021). Thus, an educational innovation project was launched and aimed at implementing digital technologies to support the teaching staff. A computer-based crime scene simulation tool (allowing students to visualize 360° crime scenes and relevant items) and a communication tool (to simplify and centralise the communication between the students and the teaching staff) were implemented. This article describes the implementation, added value and limitations of these digital technologies in problem-based learning activities. Prior to 2020, the practical course forensic practice was delivered entirely on-site without specific technologies, and entirely on-line in 2020 (due to the sanitary restrictions related to the COVID-19 pandemic). Finally, in 2021, on-line and on-site activities were implemented with success, combining the best of both approaches in a blended teaching mode. An overall increase in the satisfaction of students and teaching staff was observed with the implementation of these tools. Limiting presence on-site allowed students to take a step back from the activities and collected items. This promoted critical thinking, and together with an increase in structured (on-line and on-site) interactions allowed for a positive, continuous learning experience. While the evaluations of these novel technologies were very positive, students still expressed their willingness to perform certain tasks on-site and a preference for face-to-face interactions.
Subject(s)
COVID-19 , Problem-Based Learning , Humans , Digital Technology , Pandemics , Forensic MedicineABSTRACT
Following a chemical incident involving chemical warfare agents or more broadly, chemical weapons, there are two possible approaches in dealing with the traditional forensic analysis of contaminated exhibits. The first is to analyze the contaminated items under safe conditions (i.e. in laboratories dedicated to the handling of such substances), while the second relies on item decontamination prior to processing them in traditional forensic laboratories. One of the main limitations of the latter is the possible degradation or destruction of traces caused by the decontamination process. Hence, it is crucial to have as much information as possible on the impact of different decontamination agents and procedures on traces. This research presents experimental results on the recovery of fingermarks on glass after the application of decontaminants typically used in case of chemical incidents. The impact of 11 decontaminants on fingermarks deposited on glass and on the subsequent enhancement with cyanoacrylate and Small Particle Reagent (SPR) was evaluated (by visual examination) by four evaluators. The results of the study demonstrated that the persistence of fingermarks on glass is highly dependent on the type of decontaminant used. Decontamination agents based on the principle of nucleophilic substitution to neutralize toxic chemicals allowed good subsequent development of fingermarks with SPR. Powdered decontaminants did not show any indication of alteration of fingermarks, whereas decontamination with oxidants leads to variable results.
Subject(s)
Chemical Warfare Agents , Chemical Warfare Agents/toxicity , Decontamination/methods , Glass , Cyanoacrylates , Forensic Medicine , Indicators and Reagents , DermatoglyphicsABSTRACT
Since its introduction in 1986, 3D printing technology is in constant development. 3D printers are becoming more and more performant and accessible. In 2013, the Liberator blueprints are released online. This single-shot pistol can be entirely manufactured using a 3D printer, except for the firing pin and the ammunition. First, this research aims at establishing an overview of all the elements and traces potentially present when a 3D-printed firearm is involved, whether it is fired or not. In the second part, we study these elements for exploitability to obtain information about the manufacture of the firearm (printing processes, 3D printers and polymers). For this purpose, a total of 36 Liberators were manufactured using different printing conditions (i.e., printing processes, printers, polymers and parameters). The tested printing processes were based on the principles of Material Extrusion (ME), Vat Photopolymerization (VP) and Powder Bed Fusion (PBF). All 3D-printed firearms manufactured via ME and PBF were able to fire whereas Liberators manufactured by VP printing could not be fired. This could be explained by the lack of precision of the prints making it impossible to assemble some of the Liberators, or by the fact that the polymer was not suitable to produce the springs. All the barrels were broken by the discharge, projecting polymer pieces or fragments into the environment. These polymer pieces or fragments were examined to determine which printing process was used as well as other elements related to printing parameters and conditions (e.g., layer height, filling pattern and infill density). This information is useful to determine whether a certain command file, slicer or 3D printer could be at the source of a questioned 3D-printed firearm. Melted polymer or polymer particles on elements of ammunition may also be present after the firing process. However, the examination of these particles does not allow inferring other information, except the possible use of a 3D-printed polymer firearm.
ABSTRACT
The use of ion mobility separations (IMSs) in metabolomics approaches has started to be deeply explored in the last years. In this work, the use of liquid chromatography (LC) coupled to IMS-quadrupole time-of-flight mass spectrometry (QTOF MS) has been evaluated in a metabolomics experiments using single injection of the samples. IMS has allowed obtaining cleaner fragmentation spectra, of nearly tandem MS quality, in data-independent acquisition mode. This is much useful in this research area as a second injection, generally applied in LC-QTOF MS workflows to obtain tandem mass spectra, is not necessary, saving time and evading possible compound degradation. As a case study, the smoke produced after combustion of herbal blends used to spray synthetic cannabinoids has been selected as study matrix. The smoke components were trapped in carbon cartridges, desorbed and analyzed by LC-IMS-QTOF MS using different separation mechanisms (reversed phase and HILIC) and acquiring in both positive and negative mode to widen the chemical domain. Partial Least Squares-Discriminant Analysis highlighted several compounds, and ratio between N-Isopropyl-3-(isoquinolinyl)-2-propen-1-amine and quinoline allowed differentiating between tobacco and herbal products. These two compounds were tentatively identified using the cleaner fragmentation spectra from a single injection in the IMS-QTOF MS, with additional confidence obtained by retention time (Rt) and collisional cross section (CCS) prediction using artificial neural networks. Data from this work show that LC-IMS-QTOF is an efficient technique in untargeted metabolomics, avoiding re-injection of the samples for elucidation purposes. In addition, the prediction models for Rt and CCS resulted of help in the elucidation process of potential biomarkers.
ABSTRACT
Arsonists may use ignitable liquids to start, accelerate and amplify fires. The sampling of volatiles present on the hands of suspected arsonists is therefore sometimes carried out in the course of the investigation of (possible) deliberate fires. Several collection protocols have been proposed, relying on the concentration of volatiles by the transfer on PVC gloves and further passive headspace extraction with Activated Charcoal Strips (ACS). Previous research findings assessing the use of Activated Carbon Cloth (ACC) - initially developed for the adsorption of gas in military applications - opens the path to new perspectives regarding the extraction and the concentration of ignitable liquid residues in general, and for the sampling on hands in particular. Five alternative methods (four relying on the use of ACC and one on ACS) were considered for the collection of gasoline traces present on the hands and their subsequent analysis by gas chromatography - mass spectrometry. Gasoline was deposited onto the palms of volunteers to study the differences between the collection method using ACS and those using ACC. For the latter, either the volunteer hands were placed in nylon bags with an ACC on the palm or suspended, or, powder-free latex gloves were used, with an ACC on the palm or in a separate extraction, with the glove in a nylon bag and the ACC suspended. The results showed that the background contamination was not distinguishable between ACS and ACC and their sampling ability was comparable. The two methods relying on the deposition of ACC directly on the surface of the palm where gasoline was deposited showed significantly higher collection capacity than other methods, provided that the ACC was in direct contact with the contaminated zone. The results showed that three main factors affected the collection of gasoline on the hands: the distance between the skin and the sorbent (ACC or ACS) in case of direct concentration of volatiles on the sorbent, the exposure time, and the space between the hand and the glove or bag (i.e. the headspace volume). This research opens new perspectives for the sampling of ignitable liquid residues through the use of ACC. It corroborates the perceived potential of ACC for the extraction and concentration of volatile compounds, particularly for fire debris analysis purposes. While the experiments were focused on the collection of gasoline on hands, the results provide valuable information in a more general way for the sampling of fire debris.
ABSTRACT
The technique of fire investigation is a forensic domain in which expertise and analogies play a central role. To learn how fire investigators use these analogies to support their work, we conducted an ethnographic study in a Swiss forensic police department. To propose a suitable knowledge-management strategy, we also evaluated the knowledge conservation and sharing within the department. Our results highlighted that actionable knowledge is registered mainly in the investigators' memories of a few, very experienced, individuals. Without experience with fire-incident investigations, an agent generally requires help from a more experienced colleague, who will then use his memory to find a similar case, which can contribute to the solution of the ongoing one. The research also established that knowledge is exchanged orally during on-site investigations and that knowledge receivers are generally those who are present on the scene. Using these findings, we suggest building a case library to support the externalisation and sharing of knowledge.
Subject(s)
Fires , Police , Forensic Medicine , Forensic Sciences , HumansABSTRACT
This article describes the application of a recently proposed framework for deploying wastewater-based epidemiology (WBE) to monitor illicit drug use within festivals (Benaglia et al., 2019). The festival under study was a week-long music festival in Switzerland (Swiss Festival) which attracted around 50,000 people daily. Wastewater sampling was performed during its 2014 and 2015 editions. As the Swiss Festival's wastewater is conveyed to the sewage treatment plant (STP) of the nearby city, to assess illicit drug use when there is no festival (i.e. the background consumption) wastewater sampling was also carried out during an off-festival week in 2015. During the 2014 and 2015 editions of the Swiss Festival, WBE highlighted that the most consumed illicit drugs were cannabis, MDMA, cocaine and amphetamine. Excluding cannabis, the means per capita loads of all illicit drugs were not statistically different between both editions of the Swiss Festival. The results were then compared to those of an Australian festival which had also been subject of a quantitatively assessed illicit drug use study (Lai et al., 2013). This comparison confirmed that MDMA is highly prevalent, as well as amphetamine, although to a lesser extent. Consumption of cocaine (in Switzerland) and methamphetamine (in Australia) is also high, but their use seems to be related to their availability (i.e. to the country where the festival takes place). Furthermore, it was observed that MDMA and amphetamine are more consumed during the festival compared to normal times, when there is no festival. This might suggest that their availability is increased and therefore, that a market for these substances potentially exists during the festival. This last hypothesis was assessed by consulting drug seizures made by the police during the 2015 Swiss Festival. Despite very limited data, police records suggested that most of the drugs were purchased at the festival, which supports the previous hypothesis. Results validate, on the one hand, WBE as a useful indicator to monitor illicit drug use within festivals and on the other hand, the suggested framework for deploying WBE in such environment. In addition, this study suggests the need for prevention and harm reduction measures targeted on MDMA and amphetamine during the Swiss Festival, such as drug checking laboratories.
Subject(s)
Illicit Drugs/chemistry , Music , Substance-Related Disorders/epidemiology , Wastewater/chemistry , Forensic Sciences , Humans , Substance Abuse Detection , Switzerland/epidemiologyABSTRACT
BACKGROUND AND AIMS: Wastewater-based epidemiology is an additional indicator of drug use that is gaining reliability to complement the current established panel of indicators. The aims of this study were to: (i) assess spatial and temporal trends of population-normalized mass loads of benzoylecgonine, amphetamine, methamphetamine and 3,4-methylenedioxymethamphetamine (MDMA) in raw wastewater over 7 years (2011-17); (ii) address overall drug use by estimating the average number of combined doses consumed per day in each city; and (iii) compare these with existing prevalence and seizure data. DESIGN: Analysis of daily raw wastewater composite samples collected over 1 week per year from 2011 to 2017. SETTING AND PARTICIPANTS: Catchment areas of 143 wastewater treatment plants in 120 cities in 37 countries. MEASUREMENTS: Parent substances (amphetamine, methamphetamine and MDMA) and the metabolites of cocaine (benzoylecgonine) and of Δ9 -tetrahydrocannabinol (11-nor-9-carboxy-Δ9 -tetrahydrocannabinol) were measured in wastewater using liquid chromatography-tandem mass spectrometry. Daily mass loads (mg/day) were normalized to catchment population (mg/1000 people/day) and converted to the number of combined doses consumed per day. Spatial differences were assessed world-wide, and temporal trends were discerned at European level by comparing 2011-13 drug loads versus 2014-17 loads. FINDINGS: Benzoylecgonine was the stimulant metabolite detected at higher loads in southern and western Europe, and amphetamine, MDMA and methamphetamine in East and North-Central Europe. In other continents, methamphetamine showed the highest levels in the United States and Australia and benzoylecgonine in South America. During the reporting period, benzoylecgonine loads increased in general across Europe, amphetamine and methamphetamine levels fluctuated and MDMA underwent an intermittent upsurge. CONCLUSIONS: The analysis of wastewater to quantify drug loads provides near real-time drug use estimates that globally correspond to prevalence and seizure data.
Subject(s)
Environmental Monitoring/methods , Illicit Drugs , Spatio-Temporal Analysis , Substance Abuse Detection/methods , Wastewater/chemistry , Amphetamine/analysis , Chromatography, Liquid , Cocaine/analogs & derivatives , Cocaine/analysis , Humans , Internationality , Methamphetamine/analysis , N-Methyl-3,4-methylenedioxyamphetamine/analysis , Tandem Mass SpectrometryABSTRACT
A collaborative study conducted by three police forensic units, a DNA laboratory, and a forensic academic institute was undertaken in order to compare the performance of four different swabs in controlled and quasi-operational conditions. For this purpose, a reference swab (Prionics cardboard evidence collection kit) currently used within the police forensic units and 3 challenger swabs (COPAN 4N6FLOQSwabs™ (Genetics variety), Puritan FAB-MINI-AP and Sarstedt Forensic Swab) were used for collecting DNA traces from previously used items (referred as "touch DNA" in this article) including on 60 collars, 60 screwdrivers and 60 steering wheels obtained from volunteers. For each comparison, the surface considered was divided into two equal components; one was sampled with the reference swab and the other with one of the three challenger swabs. This lead to a total of 360 samples. Conclusions were consistent within the four operational partners. From a practical point of view, the COPAN 4N6FLOQSwabs™ (Genetics variety) was judged the most convenient to use. Furthermore, it allowed the recovery of significantly more DNA from collars (0.65 vs 0.13â¯ng/µL) and steering wheels (2.82 vs 1.77â¯ng/µL), and a similar amount of DNA from screwdrivers (0.032 vs 0.026â¯ng/µL) compared with the Prionics reference swab. The two other challenger swabs provided results that were not significantly different from the reference swab, except for the Puritan swab, whose performance was significantly lower for steering wheels (0.37 vs 0.58â¯ng/µL). As part of a conservation study, 50⯵L of a blood dilution (1/4 with PBS) was deposited on a total of 105 COPAN (Genetics and Crime Scene varieties), Prionics and Sarstedt swabs. They were stored within a cupboard at room temperature. The integrity of the recovered DNA was evaluated with NGM SElect™ DNA profiles after different time-spans ranging from 1 day to 12 months by comparing the height difference of the peaks occurring at the shortest and longest loci, respectively. DNA seemed to remain stable, except when using the COPAN 4N6FLOQSwabs™ treated with an antimicrobial agent (Crime scene variety), which resulted in significant DNA degradation. Following these tests, the COPAN 4N6FLOQSwabs™ (Genetics variety), a model with a desiccant, was selected for further testing in fully operational conditions.
Subject(s)
DNA/analysis , Specimen Handling/instrumentation , Touch , DNA Fingerprinting , Humans , Preservation, Biological , Real-Time Polymerase Chain ReactionABSTRACT
Wastewater analysis offers objective and complementary information to illicit drug agencies by monitoring patterns of illicit drug consumption. In this study, wastewater samples from three different wastewater treatment plants in Sydney, Australia were collected in March 2016. Ten targeted drugs were analysed and temporal and geographical analyses were performed to obtain a better understanding of the type and amount of illicit drugs consumed in Sydney in comparison with similar studies conducted around Australia and in Europe. Among the targeted drugs, methamphetamine was consumed the most, followed by cocaine and 3,4-methylenedioxymethamphetamine (MDMA). Weekly patterns were observed where a peak during the weekend was present. The geographical analysis showed differences between the regions targeted. This observation may be related to socio-demographic aspects. The comparison of our study to other data sources from Australia showed a high consumption of methamphetamine in Sydney and Western Australia. The comparison between Sydney and different European cities revealed a difference in consumption, which is in line with traditional market indicators. The information obtained through wastewater analysis provides complementary information regarding illicit drug consumption, the size, and the evolution of the illicit drug market. This, ultimately, will assist authorities in making informed decisions.
ABSTRACT
Counterfeit luxury fashion goods have rarely been the subject of scientific studies. Very little is known about the mechanisms of this illicit market despite the apparent prevalence and their adverse consequences. Counterfeit watches remain one of the preferred targets in the luxury goods segment. The study of marks or traces in a forensic intelligence perspective can contribute to an improved understanding of the phenomenon. The aim of our research was to highlight different types of links that can be drawn between specimens of counterfeit watches, to carry out a thorough study of the information conveyed by the revealed links, to study their complementarity and to get an understanding of the intelligence that can be produced from these pieces of information. Thirty-five counterfeit watches of a commonly counterfeit watch brand including seven popular models were studied in this research. Chemical and physical links were found that corroborated existing knowledge and also revealed new connections between different seizures or specimens. The comparison of chemical and physical features combined with spatiotemporal information on the seized watches enabled us to produce intelligence disclosing possible aspects of the structure and the organisation of production and distribution channels. We were able to reveal or confirm links between watches that were previously unknown or uncertain and demonstrated the interconnection of all watches on a chemical and/or physical level, suggesting an overhead organised network with substructures. Despite the limited set of specimens that was considered, this study illustrates that forensic intelligence on this illicit market can be used to support consistent decision-making from all the key-players involved in the anti-counterfeiting process.
ABSTRACT
Between 1920 and 1967, approximatively 8200 tons of ammunition waste were dumped into some Swiss lakes. This study is part of the extensive historical and technical investigations performed since 1995 by Swiss authorities to provide a risk assessment. It aims to assess whether explosive monitoring by passive sampling is feasible in lake-bottom waters. Polar organic chemical integrative sampler (POCIS) and Chemcatcher were first calibrated in a channel system supplied with continuously refreshed lake water spiked with two nitroamines (HMX and RDX), one nitrate ester (PETN), and six nitroaromatics (including TNT). Exposure parameters were kept as close as possible to the ones expected at the bottom of two affected lakes. Sixteen POCIS and Chemcatcher were simultaneously deployed in the channel system and removed in duplicates at 8 different intervals over 21 days. Sorbents and polyethersulfone (PES) membranes were separately extracted and analyzed by UPLC-MS/MS. When possible, a three-compartment model was used to describe the uptake of compounds from water, over the PES membrane into the sorbent. Uptake of target compounds by sorbents was shown not to approach equilibrium during 21 days. However, nitroaromatics strongly accumulated in PES, thus delaying the transfer of these compounds to sorbents (lag-phase up to 9 days). Whereas sampling rate (RS) of nitroamines were in the range of 0.06-0.14â¯L day-1, RS of nitroaromatics were up to 10 times lower. As nitroaromatic accumulation in PES was integrative over 21 days, PES was used as receiving phase for these compounds. The samplers were then deployed at lake bottoms. To ensure that exposure conditions were similar between calibration and field experiments, low-density polyethylene strips spiked with performance reference compounds were co-deployed in both experiments and dissipation data were compared. Integrative concentrations of explosives measured in the lakes confirmed results obtained by previous studies based on grab sampling.
Subject(s)
Azocines/analysis , Environmental Monitoring/methods , Explosive Agents/analysis , Triazines/antagonists & inhibitors , Trinitrotoluene/analysis , Water Pollutants, Chemical/analysis , Calibration , Chromatography, Liquid , Kinetics , Lakes/chemistry , Organic Chemicals/analysis , Polymers/chemistry , Sulfones/chemistry , Tandem Mass Spectrometry , Water/chemistryABSTRACT
Deliberate fires are a very common problem affecting all countries around the world. They create a high sense of insecurity within communities, consuming and straining many resources (human and financial). Yet, despite various attempts, significantly tackling and reducing deliberate fires has remained largely ineffective, mainly due to the case-by-case approach implemented in responding to these incidents. Drawing on the repetitive nature of some types of deliberate fires, it was shown that adopting an intelligence-based approach is promising in tackling and reducing repetitive deliberate fires. This paper presents a two-fold procedure developed to produce intelligence on a dataset of fire events that were either deliberate or unknown in origin. Firstly, through the creation of a relevant dataset (which is a peculiar problem due to the specificities of the event of fire) and secondly through the application of specific analyses. This procedure was implemented on a dataset of fire events collated from a nine-year period in the State of Geneva, Switzerland. Results show that rudimentary data and simple processing can already generate valuable intelligence, often unsuspected until then. These results provide responding agencies with a clearer understanding of the problem, which can also support their decision-making process. This study proposes the basis for the development of an integrated real-time intelligence process. Such a process would allow the systematic and real-time monitoring of fire events in general and deliberate fires in particular by providing an immediate view of the problem, detecting recurrent events and revealing linkages between cases indicating repetitions. In terms of policies and governance, such a study should encourage institutions that deal with fires to collectively reshape their objectives, share data and analyses, and coordinate their actions to reduce harm.
ABSTRACT
Counterfeit watches are products of illicit activity and contain traces of their production and distribution. Traces provide pertinent information through one of their fundamental characteristics: the ability to reveal links between specimens or cases. The aim of this study was to develop an analytical strategy to obtain the elemental composition of watchcases, by analysing a selection of 35 counterfeit watches. We propose a methodology based on multivariate statistical analysis of chemical results that discriminates between watches from common and different origins, and, ultimately, classifies them into chemical groups. All watchcases were analysed using inductively coupled plasma mass spectrometry (ICP-MS), providing representative descriptive data on the composition of watchcases. Several multivariate approaches were assessed, considering different scenarios, each using a different set of variables. It appeared that the model that performed best in terms of classification criteria could be misleading, especially in an exploratory context that focuses on the production of intelligence. At the end of the day, hierarchical cluster analysis (HCA) allowed us to classify the specimens into 14 chemical classes. Information gained through chemical analysis revealed several links between the specimens. This initial study was performed on a very limited number of watches. Although still in the developmental stage, our approach exhibits promising capabilities and encourages chemical profiling of counterfeit watches on larger scale.