ABSTRACT
PURPOSE: To study the feasibility of using the Integral Quality Monitoring (IQM) system for routine quality assurance (QA) of photon beams. METHODS: The IQM system is a commercially available dose delivery verification tool, which consists of a spatially sensitive large area transmission ion chamber, mounted on the Linac collimator, and a calculation algorithm to predict the signals in response to radiation beams. By comparing the measured and predicted signals the system verifies the accuracy of beam delivery. The ion chamber unit is a battery powered system including a dual-electrometer, temperature and pressure sensors, and inclinometers. The feasibility of using the IQM system for routine QA tests was investigated by measuring constancy values of beam parameters, with specially designed tests fields, and comparing them with those determined by a conventional system. RESULTS: The sensitivity of the beam output constancy measurements by the IQM system was found to agree with those measured by a Farmer type ion chamber placed in water phantoms to within 0.1% for typical daily output variation of ± 0.5% and ± 1%. The beam symmetry was measured with a 4 cm × 4 cm aperture at multiple off-axis distances and was found to have a highly linear relationship with those measured in a water phantom scan for intentionally introduced asymmetry between -3% and +3%. The beam flatness was measured with a two-field ratio method and was found to be linearly correlated with those measured by water phantom scan. The dosimetric equivalent of a picket fence test performed by the IQM system can serve as a constancy check of the multileaf collimator (MLC) bank positioning test. CONCLUSIONS: The IQM system has been investigated for constancy measurements of various beam parameters for photon beams. The results suggest that the system can be used for most of the routine QA tests effectively and efficiently.
Subject(s)
Particle Accelerators , Quality Assurance, Health Care , Humans , Feasibility Studies , Radiometry , WaterABSTRACT
Introduction: X-ray Velocimetry (XV) ventilation analysis is a 4-dimensional imaging-based method for quantifying regional ventilation, aiding in the assessment of lung function. We examined the performance characteristics of XV ventilation analysis by examining correlation to spirometry and measurement repeatability. Methods: XV analysis was assessed in 27 patients receiving thoracic radiotherapy for non-lung cancer malignancies. Measurements were obtained pre-treatment and at 4 and 12-months post-treatment. XV metrics such as ventilation defect percent (VDP) and regional ventilation heterogeneity (VH) were compared to spirometry at each time point, using correlation analysis. Repeatability was assessed between multiple runs of the analysis algorithm, as well as between multiple breaths in the same patient. Change in VH and VDP in a case series over 12 months was used to determine effect size and estimate sample sizes for future studies. Results: VDP and VH were found to significantly correlate with FEV1 and FEV1/FVC (range: -0.36 to -0.57; p < 0.05). Repeatability tests demonstrated that VDP and VH had less than 2% variability within runs and less than 8% change in metrics between breaths. Three cases were used to illustrate the advantage of XV over spirometry, where XV indicated a change in lung function that was either undetectable or delayed in detection by spirometry. Case A demonstrated an improvement in XV metrics over time despite stable spirometric values. Case B demonstrated a decline in XV metrics as early as 4-months, although spirometric values did not change until 12-months. Case C demonstrated a decline in XV metrics at 12 months post-treatment while spirometric values remained normal throughout the study. Based on the effect sizes in each case, sample sizes ranging from 10 to 38 patients would provide 90% power for future studies aiming to detect similar changes. Conclusions: The performance and safety of XV analysis make it ideal for both clinical and research applications across most lung indications. Our results support continued research and provide a basis for powering future studies using XV as an endpoint to examine lung health and determine therapeutic efficacy.
ABSTRACT
Tools available for reproducible, quantitative assessment of brain correspondence have been limited. We previously validated the anatomical fiducial (AFID) placement protocol for point-based assessment of image registration with millimetric (mm) accuracy. In this data descriptor, we release curated AFID placements for some of the most commonly used structural magnetic resonance imaging datasets and templates. The release of our accurate placements allows for rapid quality control of image registration, teaching neuroanatomy, and clinical applications such as disease diagnosis and surgical targeting. We release placements on individual subjects from four datasets (N = 132 subjects for a total of 15,232 fiducials) and 14 brain templates (4,288 fiducials), totalling more than 300 human rater hours of annotation. We also validate human rater accuracy of released placements to be within 1 - 2 mm (using more than 45,000 Euclidean distances), consistent with prior studies. Our data is compliant with the Brain Imaging Data Structure allowing for facile incorporation into neuroimaging analysis pipelines.
Subject(s)
Magnetic Resonance Imaging , Neuroimaging , Humans , Brain/diagnostic imaging , Quality ControlABSTRACT
PURPOSE: To provide a systematic review of the applications of 3D printing in gynecological brachytherapy. METHODS: Peer-reviewed articles relating to additive manufacturing (3D printing) from the 34 million plus biomedical citations in National Center for Biotechnology Information (NCBI/PubMed), and 53 million records in Web of Science (Clarivate) were queried for 3D printing applications. The results were narrowed sequentially to, (1) all literature in 3D printing with final publications prior to July 2022 (in English, and excluding books, proceedings, and reviews), and then to applications in, (2) radiotherapy, (3) brachytherapy, (4) gynecological brachytherapy. Brachytherapy applications were reviewed and grouped by disease site, with gynecological applications additionally grouped by study type, methodology, delivery modality, and device type. RESULTS: From 47,541 3D printing citations, 96 publications met the inclusion criteria for brachytherapy, with gynecological clinical applications compromising the highest percentage (32%), followed by skin and surface (19%), and head and neck (9%). The distribution of delivery modalities was 58% for HDR (Ir-192), 35% for LDR (I-125), and 7% for other modalities. In gynecological brachytherapy, studies included design of patient specific applicators and templates, novel applicator designs, applicator additions, quality assurance and dosimetry devices, anthropomorphic gynecological applicators, and in-human clinical trials. Plots of year-to-year growth demonstrate a rapid nonlinear trend since 2014 due to the improving accessibility of low-cost 3D printers. Based on these publications, considerations for clinical use are provided. CONCLUSIONS: 3D printing has emerged as an important clinical technology enabling customized applicator and template designs, representing a major advancement in the methodology for implantation and delivery in gynecological brachytherapy.
Subject(s)
Brachytherapy , Iodine Radioisotopes , Humans , Radiotherapy Dosage , Brachytherapy/methods , Printing, Three-DimensionalABSTRACT
PURPOSE: There are no agreed upon measures to comprehensively determine the quality of radiation oncology (RO) care delivered for prostate cancer. Consequently, it is difficult to assess the implementation of scientific advances and adherence to best practices in routine clinical practice. To address this need, the US Department of Veterans Affairs (VA) National Radiation Oncology Program established the VA Radiation Oncology Quality Surveillance (VA ROQS) Program to develop clinical quality measures to assess the quality of RO care delivered to Veterans with cancer. This article reports the prostate cancer consensus measures. METHODS AND MATERIALS: The VA ROQS Program contracted with the American Society for Radiation Oncology to commission a Blue Ribbon Panel of prostate cancer experts to develop a set of evidence-based measures and performance expectations. From February to June 2021, the panel developed quality, aspirational, and surveillance measures for (1) initial consultation and workup, (2) simulation, treatment planning, and delivery, and (3) follow-up. Dose-volume histogram (DVH) constraints to be used as quality measures for definitive and post-prostatectomy radiation therapy were selected. The panel also identified the optimal Common Terminology Criteria for Adverse Events, version 5.0 (CTCAE V5.0), toxicity terms to assess in follow-up. RESULTS: Eighteen prostate-specific measures were developed (13 quality, 2 aspirational, and 3 surveillance). DVH metrics tailored to conventional, moderately hypofractionated, and ultrahypofractionated regimens were identified. Decision trees to determine performance for each measure were developed. Eighteen CTCAE V5.0 terms were selected in the sexual, urinary, and gastrointestinal domains as highest priority for assessment during follow-up. CONCLUSIONS: This set of measures and DVH constraints serves as a tool for assessing the comprehensive quality of RO care for prostate cancer. These measures will be used for ongoing quality surveillance and improvement among veterans receiving care across VA and community sites. These measures can also be applied to clinical settings outside of those serving veterans.
Subject(s)
Prostatic Neoplasms , Radiation Oncology , Veterans , Male , Humans , United States , Quality Indicators, Health Care , Consensus , Prostatic Neoplasms/radiotherapyABSTRACT
PURPOSE: There is a paucity of data analyzing the anatomic locations and dose volume metrics achieved for surgically transposed ovaries in patients desiring fertility or hormonal preservation receiving pelvic radiation therapy (RT), which were examined herein. METHODS AND MATERIALS: This is a retrospective study including women who underwent ovarian transposition before pelvic RT between 2010 to 2020. The craniocaudal (CC) distance of the ovary centroid to the (1) plane of the sacral promontory, (2) iliac crest, and (3) the nearest distance between the ovary edge and RT planning target volume (PTV) were measured (cm). The area under the receiver operating characteristic curve and cut-point analysis estimating ovary location outside the PTV was performed. RESULTS: Thirty-one ovaries were analyzed from 18 patients. Thirteen (72.2%) were treated with intensity modulated RT, and 5 (27.8%) were treated with 3-dimensional conformal radiation therapy. Most ovaries were located above the sacral promontory (64.5%, n = 20), below the iliac crest (96.8%, n = 30), and outside the PTV (64.5%, n = 20). The median distance from the ovaries to the sacral promontory, iliac crest, and PTV was 0.8 cm (interquartile range [IQR], -0.83 to 1.59 cm), -3.22 cm (IQR, -5.12 to -1.84 cm), and 0.9 cm (IQR, -1.0 to 1.9 cm), respectively. The area under the receiver operating characteristic curve and cut-point analysis demonstrated that distance from the iliac crest predicted an ovary to be outside the PTV with an optimal cut-point of -3.0 cm (C-index = 0.82). The median mean and maximum (Dmax) ovary doses were 15.5 Gy (IQR, 9.6-20.2 Gy) and 32.2 Gy (IQR 24.8-46.5 Gy), respectively. CONCLUSIONS: Despite most transposed ovaries being located outside the PTV, nearly all remained below the iliac crest and received RT doses associated with a high risk of ovarian failure. These findings deepen our understanding of the spatial relationship between transposed ovaries and dose to inform surgical and pre-RT planning and suggest that more aggressive ovary-sparing strategies are warranted.
ABSTRACT
PURPOSE: Brachytherapy (BT) after surgical resection of keloids reduces the risk of local recurrence, but standardization of dose/technique is lacking. Typical keloid BT treatment utilizes a single-channel source prescribed to 5-mm depth. We investigated the dosimetry of a volume-based target definition for interstitial high-dose-rate BT treatment of keloids. METHODS AND MATERIALS: We retrospectively identified consecutive 14 patients who had a total of 20 keloids treated with interstitial high-dose-rate BT for keloids at our institution between 2004 and 2014. Keloids were treated with a single 8 Gy fraction prescribed to 5 mm beneath the scar within 36 h of surgery. Retrospectively, a 3-mm skin high-risk clinical target volume (HR-CTV) was contoured under the scar for volume-based dose calculations. RESULTS: Mean (SD) HR-CTV was 3.91 cm3 (3.1) and mean (SD) HR-CTV dose was 11.3 Gy (3.6). Mean D90 (SD) was 62.9% (25.8) and mean V100 (SD) was 56.5% (26.4). The mean V150 (SD), V200 (SD), and V300 (SD) were as follows: 37.6% (19.9), 25.1% (14.4), and 11.3% (6.5), respectively. No local failures were reported at 9 months median followup. There were no Grade 2 or higher late toxicities. CONCLUSIONS: Using a volume-based target definition, a wide range of target coverage was observed. This is likely a consequence of the curvature of the skin and the challenges of keeping the catheter equidistant from the skin across the target. Additional data are needed to define the potential clinical impact on outcomes/toxicities of dosimetric correlates with single-catheter BT keloid treatment.
Subject(s)
Brachytherapy , Keloid , Brachytherapy/methods , Humans , Keloid/radiotherapy , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted , Retrospective StudiesABSTRACT
PURPOSE: We sought to develop a quality surveillance program for approximately 15,000 US veterans treated at the 40 radiation oncology facilities at the Veterans Affairs (VA) hospitals each year. METHODS AND MATERIALS: State-of-the-art technologies were used with the goal to improve clinical outcomes while providing the best possible care to veterans. To measure quality of care and service rendered to veterans, the Veterans Health Administration established the VA Radiation Oncology Quality Surveillance program. The program carries forward the American College of Radiology Quality Research in Radiation Oncology project methodology of assessing the wide variation in practice pattern and quality of care in radiation therapy by developing clinical quality measures (QM) used as quality indices. These QM data provide feedback to physicians by identifying areas for improvement in the process of care and identifying the adoption of evidence-based recommendations for radiation therapy. RESULTS: Disease-site expert panels organized by the American Society for Radiation Oncology (ASTRO) defined quality measures and established scoring criteria for prostate cancer (intermediate and high risk), non-small cell lung cancer (IIIA/B stage), and small cell lung cancer (limited stage) case presentations. Data elements for 1567 patients from the 40 VA radiation oncology practices were abstracted from the electronic medical records and treatment management and planning systems. Overall, the 1567 assessed cases passed 82.4% of all QM. Pass rates for QM for the 773 lung and 794 prostate cases were 78.0% and 87.2%, respectively. Marked variations, however, were noted in the pass rates for QM when tumor site, clinical pathway, or performing centers were separately examined. CONCLUSIONS: The peer-review protected VA-Radiation Oncology Surveillance program based on clinical quality measures allows providers to compare their clinical practice to peers and to make meaningful adjustments in their personal patterns of care unobtrusively.
Subject(s)
Cancer Care Facilities/standards , Hospitals, Veterans/standards , Program Development , Quality Assurance, Health Care/standards , Radiation Oncology/standards , Carcinoma, Non-Small-Cell Lung/radiotherapy , Evidence-Based Medicine/standards , Humans , Lung Neoplasms/radiotherapy , Male , Peer Review , Program Evaluation/standards , Prostatic Neoplasms/radiotherapy , Quality Assurance, Health Care/methods , Quality Improvement/standards , Quality Indicators, Health Care/standards , Small Cell Lung Carcinoma/radiotherapy , Societies, Medical/standards , United States , VeteransABSTRACT
PURPOSE: The American Brachytherapy Society (ABS) consensus guidelines for high-dose-rate (HDR) prostate brachytherapy suggest 11 different dose constraints for the urethra. The purpose of this study is to evaluate whether a single urethral constraint of D0.1 cm3 < 110% could meet all the proposed ABS urethral constraints and to evaluate the heterogeneity and similarities of other portions of the dose-volume histogram (DVH) when only optimizing to a single constraint. METHODS: This is a retrospective study of 18 consecutively treated HDR prostate brachytherapy patients treated between May 2018 to November 2018. Nine patients underwent HDR brachytherapy combined with external beam radiation therapy, and nine underwent HDR brachytherapy as monotherapy. Additional DVH values were extracted for the whole, proximal, middle, and distal urethra and compared for differences. RESULTS: None of the ABS suggested constraints were violated when optimizing the urethra D0.1 cm3 dose to be less than 110% of the prescription. An evaluation of the DVHs for the whole, proximal, middle, and distal urethra showed a large variation in the shape of the remainder of the DVH for all parts of the urethra. The largest standard deviations in dose to the whole and middle urethra were at the V14 dose level, and that to the proximal and distal urethra were at the V10 dose level. CONCLUSION: A single urethral dose constraint of D0.1 cm3 < 110% can meet all the proposed ABS constraints. There is high variability in other parts of the urethra DVH when only using a single constraint. Additional data is needed to determine ideal constraints for the entirety of the urethra DVH.
Subject(s)
Brachytherapy/adverse effects , Prostatic Neoplasms/radiotherapy , Radiation Dosage , Urethra , Aged , Humans , Male , Middle Aged , Organs at Risk , Practice Guidelines as Topic , Radiometry , Radiotherapy Dosage , Retrospective StudiesABSTRACT
Accurate spatial correspondence between template and subject images is a crucial step in neuroimaging studies and clinical applications like stereotactic neurosurgery. In the absence of a robust quantitative approach, we sought to propose and validate a set of point landmarks, anatomical fiducials (AFIDs), that could be quickly, accurately, and reliably placed on magnetic resonance images of the human brain. Using several publicly available brain templates and individual participant datasets, novice users could be trained to place a set of 32 AFIDs with millimetric accuracy. Furthermore, the utility of the AFIDs protocol is demonstrated for evaluating subject-to-template and template-to-template registration. Specifically, we found that commonly used voxel overlap metrics were relatively insensitive to focal misregistrations compared to AFID point-based measures. Our entire protocol and study framework leverages open resources and tools, and has been developed with full transparency in mind so that others may freely use, adopt, and modify. This protocol holds value for a broad number of applications including alignment of brain images and teaching neuroanatomy.
Subject(s)
Brain/anatomy & histology , Fiducial Markers , Image Processing, Computer-Assisted/methods , Magnetic Resonance Imaging/methods , Neuroimaging/methods , HumansABSTRACT
PURPOSE: Developing automated methods to identify task-driven quality assurance (QA) procedures is key toward increasing safety, efficacy, and efficiency. We investigate the use of machine learning (ML) methods for possible visualization, automation, and targeting of QA, and assess its performance using multi-institutional data. METHODS: To enable automated analysis of QA data given its higher dimensional nature, we used nonlinear kernel mapping with support vector data description (SVDD) driven approaches. Instead of using labeled data as in typical support vector machine (SVM) applications, which requires exhaustive annotation, we applied a clustering extension of SVDD, which identifies the minimal enclosing hypersphere in the feature space defined by a kernel function separating normal operations from possible failures (i.e., outliers). In our case, QA test data are mapped by a Gaussian kernel to a higher dimensional feature space and then the minimal enclosing sphere was identified. This sphere, when mapped back to the input data space along the principal components, can separate the data into several components, each enclosing a separate cluster of QA points that could be used to evaluate tolerance boundaries and test reliability. We evaluated this approach for gantry sag, radiation field shift, and [multileaf collimator (MLC)] offset data acquired using electronic portal imaging devices (EPID), as representative examples. RESULTS: Data from eight LINACS and seven institutions (n = 119) were collected. A standardized EPID image of a phantom with fiducials provided deviation estimates between the radiation field and phantom center at four cardinal gantry angles. Deviation measurements in the horizontal direction (0°, 180°) were used to determine the gantry sag and deviations in the vertical direction (90°, 270°) were used to determine the field shift. These measurements were fed into the SVDD clustering algorithm with varying hypersphere radii (Gaussian widths). For gantry sag analysis, two clusters were identified one of which contained 2.5% of the outliers and also exceeded the 1 mm tolerance set by TG-142. In the case of field shifts, SVM clustering identified two distinct classes of measurements primarily driven by variations in the second principal component at 270°. Results from MLC analysis identified one outlier cluster (0.34%) along Leaf offset Constancy (LoC) axis that coincided with TG-142 limits. CONCLUSION: Machine learning methods based on SVDD clustering are promising for developing automated QA tools and providing insights into their reliability and reproducibility.
Subject(s)
Machine Learning , Neoplasms/radiotherapy , Particle Accelerators/standards , Phantoms, Imaging , Quality Assurance, Health Care/standards , Algorithms , Automation , Electrical Equipment and Supplies , Humans , Particle Accelerators/instrumentation , Radiotherapy DosageABSTRACT
PURPOSE: Currently, available Computed Tomography dose metrics are mostly based on fixed tube current Monte Carlo (MC) simulations and/or physical measurements such as the size specific dose estimate (SSDE). In addition to not being able to account for Tube Current Modulation (TCM), these dose metrics do not represent actual patient dose. The purpose of this study was to generate and evaluate a dose estimation model based on the Generalized Linear Model (GLM), which extends the ability to estimate organ dose from tube current modulated examinations by incorporating regional descriptors of patient size, scanner output, and other scan-specific variables as needed. METHODS: The collection of a total of 332 patient CT scans at four different institutions was approved by each institution's IRB and used to generate and test organ dose estimation models. The patient population consisted of pediatric and adult patients and included thoracic and abdomen/pelvis scans. The scans were performed on three different CT scanner systems. Manual segmentation of organs, depending on the examined anatomy, was performed on each patient's image series. In addition to the collected images, detailed TCM data were collected for all patients scanned on Siemens CT scanners, while for all GE and Toshiba patients, data representing z-axis-only TCM, extracted from the DICOM header of the images, were used for TCM simulations. A validated MC dosimetry package was used to perform detailed simulation of CT examinations on all 332 patient models to estimate dose to each segmented organ (lungs, breasts, liver, spleen, and kidneys), denoted as reference organ dose values. Approximately 60% of the data were used to train a dose estimation model, while the remaining 40% was used to evaluate performance. Two different methodologies were explored using GLM to generate a dose estimation model: (a) using the conventional exponential relationship between normalized organ dose and size with regional water equivalent diameter (WED) and regional CTDIvol as variables and (b) using the same exponential relationship with the addition of categorical variables such as scanner model and organ to provide a more complete estimate of factors that may affect organ dose. Finally, estimates from generated models were compared to those obtained from SSDE and ImPACT. RESULTS: The Generalized Linear Model yielded organ dose estimates that were significantly closer to the MC reference organ dose values than were organ doses estimated via SSDE or ImPACT. Moreover, the GLM estimates were better than those of SSDE or ImPACT irrespective of whether or not categorical variables were used in the model. While the improvement associated with a categorical variable was substantial in estimating breast dose, the improvement was minor for other organs. CONCLUSIONS: The GLM approach extends the current CT dose estimation methods by allowing the use of additional variables to more accurately estimate organ dose from TCM scans. Thus, this approach may be able to overcome the limitations of current CT dose metrics to provide more accurate estimates of patient dose, in particular, dose to organs with considerable variability across the population.
Subject(s)
Radiometry/methods , Tomography, X-Ray Computed , Adult , Child , Female , Humans , Linear Models , Male , Monte Carlo Method , Radiometry/standards , Reference StandardsABSTRACT
Purpose: In diabetes, pancreatic beta cell mass declines significantly prior to onset of fasting hyperglycemia. This decline may be due to endoplasmic reticulum (ER) stress, and the system L amino acid transporter LAT1 may be a biomarker of this process. In this study, we used 5-(2- 18F-fluoroethoxy)-L-tryptophan ( 18F-L-FEHTP) to target LAT1 as a potential biomarker of beta cell function in diabetes. Procedures: Uptake of 18F-L-FEHTP was determined in wild-type C57BL/6 mice by ex vivo biodistribution. Both dynamic and static positron emission tomography (PET) images were acquired in wild-type and Akita mice, a model of ER stress-induced diabetes, as well as in mice treated with streptozotocin (STZ). LAT1 expression in both groups of mice was evaluated by immunofluorescence microscopy. Results: Uptake of 18F-L-FEHTP was highest in the pancreas, and static PET images showed highly specific pancreatic signal. Time-activity curves showed significantly reduced 18F-L-FEHTP uptake in Akita mice, and LAT1 expression was also reduced. However, mice treated with STZ, in which beta cell mass was reduced by 62%, showed no differences in 18F-L-FEHTP uptake in the pancreas, and there was no significant correlation of 18F-L-FEHTP uptake with beta cell mass. Conclusions:18F-L-FEHTP is highly specific for the pancreas with little background uptake in kidney or liver. We were able to detect changes in LAT1 in a mouse model of diabetes, but these changes did not correlate with beta cell function or mass. Therefore, 18F-L-FEHTP PET is not a suitable method for the noninvasive imaging of changes in beta cell function during the progression of diabetes.
ABSTRACT
PURPOSE: Clinical data that are generated through routine radiation therapy procedures can be leveraged as a source of knowledge to provide evidence-based decision support for future patients. Treatment planning in radiation therapy often relies on trial-and-error iterations, experience, judgment calls and general guidelines. The authors present a knowledge-driven decision support system that assists clinicians by reducing some of the uncertainties associated with treatment planning and provides quantified empirical estimates to help minimize the radiation dose to healthy critical structures surrounding the tumor. METHODS: A database of retrospective DICOM RT data fuels a decision support engine, which assists clinicians in selecting dose constraints and assessing dose distributions. The first step is to quantify the spatial relationships between the tumor and surrounding critical structures through features that account for distance, volume, overlap, location, shape and orientation. These features are used to identify database cases that are anatomically similar to the new patient. The dose profiles of these database cases can help clinicians to estimate an acceptable dose distribution for the new case, based on empirical evidence. Since database diversity is essential for good system performance, an infrastructure for multi-institutional collaboration was also conceptualized in order to pave the way for data sharing of protected health information. RESULTS: A set of 127 retrospective test cases was collected from a single institution in order to conduct a leave-one-out evaluation of the decision support module. In 72 % of these retrospective test cases, patients with similar tumor anatomy were also found to exhibit similar radiation dose distributions. This demonstrates the system's ability to successfully extract retrospective database cases that can estimate the new patient's dose distribution. CONCLUSION: The radiation therapy treatment planning decision support system presented here can assist clinicians in determining good dose constraints and assessing dose distributions by using knowledge gained from retrospective treatment plans.
Subject(s)
Head and Neck Neoplasms/diagnostic imaging , Radiotherapy Planning, Computer-Assisted/methods , Databases, Factual , Decision Support Techniques , Head and Neck Neoplasms/radiotherapy , Humans , Radiotherapy Dosage , Retrospective StudiesABSTRACT
PURPOSE: The purpose of this study was 2-fold. One purpose was to develop an automated, streamlined quality assurance (QA) program for use by multiple centers. The second purpose was to evaluate machine performance over time for multiple centers using linear accelerator (Linac) log files and electronic portal images. The authors sought to evaluate variations in Linac performance to establish as a reference for other centers. METHODS: The authors developed analytical software tools for a QA program using both log files and electronic portal imaging device (EPID) measurements. The first tool is a general analysis tool which can read and visually represent data in the log file. This tool, which can be used to automatically analyze patient treatment or QA log files, examines the files for Linac deviations which exceed thresholds. The second set of tools consists of a test suite of QA fields, a standard phantom, and software to collect information from the log files on deviations from the expected values. The test suite was designed to focus on the mechanical tests of the Linac to include jaw, MLC, and collimator positions during static, IMRT, and volumetric modulated arc therapy delivery. A consortium of eight institutions delivered the test suite at monthly or weekly intervals on each Linac using a standard phantom. The behavior of various components was analyzed for eight TrueBeam Linacs. RESULTS: For the EPID and trajectory log file analysis, all observed deviations which exceeded established thresholds for Linac behavior resulted in a beam hold off. In the absence of an interlock-triggering event, the maximum observed log file deviations between the expected and actual component positions (such as MLC leaves) varied from less than 1% to 26% of published tolerance thresholds. The maximum and standard deviations of the variations due to gantry sag, collimator angle, jaw position, and MLC positions are presented. Gantry sag among Linacs was 0.336 ± 0.072 mm. The standard deviation in MLC position, as determined by EPID measurements, across the consortium was 0.33 mm for IMRT fields. With respect to the log files, the deviations between expected and actual positions for parameters were small (<0.12 mm) for all Linacs. Considering both log files and EPID measurements, all parameters were well within published tolerance values. Variations in collimator angle, MLC position, and gantry sag were also evaluated for all Linacs. CONCLUSIONS: The performance of the TrueBeam Linac model was shown to be consistent based on automated analysis of trajectory log files and EPID images acquired during delivery of a standardized test suite. The results can be compared directly to tolerance thresholds. In addition, sharing of results from standard tests across institutions can facilitate the identification of QA process and Linac changes. These reference values are presented along with the standard deviation for common tests so that the test suite can be used by other centers to evaluate their Linac performance against those in this consortium.
Subject(s)
Particle Accelerators/standards , Automation , Electrical Equipment and Supplies , Phantoms, Imaging , Quality Control , SoftwareABSTRACT
PURPOSE: To develop a practical workflow for retrospectively analyzing target and normal tissue dose-volume endpoints for various intensity modulated radiation therapy (IMRT) delivery techniques; to develop technique-specific planning goals to improve plan consistency and quality when feasible. METHODS AND MATERIALS: A total of 165 consecutive head-and-neck patients from our patient registry were selected and retrospectively analyzed. All IMRT plans were generated using the same dose-volume guidelines for TomoTherapy (Tomo, Accuray), TrueBeam (TB, Varian) using fixed-field IMRT (TB_IMRT) or RAPIDARC (TB_RAPIDARC), or Siemens Oncor (Siemens_IMRT, Siemens). A MATLAB-based dose-volume extraction and analysis tool was developed to export dosimetric endpoints for each patient. With a fair stratification of patient cohort, the variation of achieved dosimetric endpoints was analyzed among different treatment techniques. Upon identification of statistically significant variations, technique-specific planning goals were derived from dynamically accumulated institutional data. RESULTS: Retrospective analysis showed that although all techniques yielded comparable target coverage, the doses to the critical structures differed. The maximum cord doses were 34.1 ± 2.6, 42.7 ± 2.1, 43.3 ± 2.0, and 45.1 ± 1.6 Gy for Tomo, TB_IMRT, TB_RAPIDARC, and Siemens_IMRT plans, respectively. Analyses of variance showed significant differences for the maximum cord doses but no significant differences for other selected structures among the investigated IMRT delivery techniques. Subsequently, a refined technique-specific dose-volume guideline for maximum cord dose was derived at a confidence level of 95%. The dosimetric plans that failed the refined technique-specific planning goals were reoptimized according to the refined constraints. We observed better cord sparing with minimal variations for the target coverage and other organ at risk sparing for the Tomo cases, and higher parotid doses for C-arm linear accelerator-based IMRT and RAPIDARC plans. CONCLUSION: Patient registry-based processes allowed easy and systematic dosimetric assessment of treatment plan quality and consistency. Our analysis revealed the dependence of certain dosimetric endpoints on the treatment techniques. Technique-specific refinement of planning goals may lead to improvement in plan consistency and plan quality.
Subject(s)
Head and Neck Neoplasms/radiotherapy , Organ Sparing Treatments/methods , Organs at Risk/radiation effects , Radiotherapy Planning, Computer-Assisted/methods , Radiotherapy, Intensity-Modulated/methods , Analysis of Variance , Cochlea/radiation effects , Feasibility Studies , Humans , Mandible/radiation effects , Parotid Gland/radiation effects , Quality of Health Care , Radiation Injuries/prevention & control , Radiotherapy Dosage , Radiotherapy Planning, Computer-Assisted/standards , Radiotherapy, Intensity-Modulated/standards , Radiotherapy, Intensity-Modulated/statistics & numerical data , Retrospective Studies , Spinal Cord/radiation effectsABSTRACT
PURPOSE: Task Group 204 introduced effective diameter (ED) as the patient size metric used to correlate size-specific-dose-estimates. However, this size metric fails to account for patient attenuation properties and has been suggested to be replaced by an attenuation-based size metric, water equivalent diameter (DW). The purpose of this study is to investigate different size metrics, effective diameter, and water equivalent diameter, in combination with regional descriptions of scanner output to establish the most appropriate size metric to be used as a predictor for organ dose in tube current modulated CT exams. METHODS: 101 thoracic and 82 abdomen/pelvis scans from clinically indicated CT exams were collected retrospectively from a multidetector row CT (Sensation 64, Siemens Healthcare) with Institutional Review Board approval to generate voxelized patient models. Fully irradiated organs (lung and breasts in thoracic scans and liver, kidneys, and spleen in abdominal scans) were segmented and used as tally regions in Monte Carlo simulations for reporting organ dose. Along with image data, raw projection data were collected to obtain tube current information for simulating tube current modulation scans using Monte Carlo methods. Additionally, previously described patient size metrics [ED, DW, and approximated water equivalent diameter (DWa)] were calculated for each patient and reported in three different ways: a single value averaged over the entire scan, a single value averaged over the region of interest, and a single value from a location in the middle of the scan volume. Organ doses were normalized by an appropriate mAs weighted CTDIvol to reflect regional variation of tube current. Linear regression analysis was used to evaluate the correlations between normalized organ doses and each size metric. RESULTS: For the abdominal organs, the correlations between normalized organ dose and size metric were overall slightly higher for all three differently (global, regional, and middle slice) reported DW and DWa than they were for ED, but the differences were not statistically significant. However, for lung dose, computed correlations using water equivalent diameter calculated in the middle of the image data (DW,middle) and averaged over the low attenuating region of lung (DW,regional) were statistically significantly higher than correlations of normalized lung dose with ED. CONCLUSIONS: To conclude, effective diameter and water equivalent diameter are very similar in abdominal regions; however, their difference becomes noticeable in lungs. Water equivalent diameter, specifically reported as a regional average and middle of scan volume, was shown to be better predictors of lung dose. Therefore, an attenuation-based size metric (water equivalent diameter) is recommended because it is more robust across different anatomic regions. Additionally, it was observed that the regional size metric reported as a single value averaged over a region of interest and the size metric calculated from a single slice/image chosen from the middle of the scan volume are highly correlated for these specific patient models and scan types.
Subject(s)
Radiation Dosage , Tomography, X-Ray Computed , Adult , Female , Humans , Male , Monte Carlo Method , Phantoms, Imaging , Radiography, Abdominal , Radiography, Thoracic , RadiometryABSTRACT
PURPOSE: The purpose of this study was to assess the accuracy of a Monte Carlo simulation-based method for estimating radiation dose from multidetector computed tomography (MDCT) by comparing simulated doses in ten patients to in-vivo dose measurements. METHODS: MD Anderson Cancer Center Institutional Review Board approved the acquisition of in-vivo rectal dose measurements in a pilot study of ten patients undergoing virtual colonoscopy. The dose measurements were obtained by affixing TLD capsules to the inner lumen of rectal catheters. Voxelized patient models were generated from the MDCT images of the ten patients, and the dose to the TLD for all exposures was estimated using Monte Carlo based simulations. The Monte Carlo simulation results were compared to the in-vivo dose measurements to determine accuracy. RESULTS: The calculated mean percent difference between TLD measurements and Monte Carlo simulations was -4.9% with standard deviation of 8.7% and a range of -22.7% to 5.7%. CONCLUSIONS: The results of this study demonstrate very good agreement between simulated and measured doses in-vivo. Taken together with previous validation efforts, this work demonstrates that the Monte Carlo simulation methods can provide accurate estimates of radiation dose in patients undergoing CT examinations.
Subject(s)
Monte Carlo Method , Multidetector Computed Tomography , Humans , Phantoms, Imaging , Radiation Dosage , Radiometry , Reproducibility of ResultsABSTRACT
PURPOSE: Monte Carlo (MC) simulation methods have been widely used in patient dosimetry in computed tomography (CT), including estimating patient organ doses. However, most simulation methods have undergone a limited set of validations, often using homogeneous phantoms with simple geometries. As clinical scanning has become more complex and the use of tube current modulation (TCM) has become pervasive in the clinic, MC simulations should include these techniques in their methodologies and therefore should also be validated using a variety of phantoms with different shapes and material compositions to result in a variety of differently modulated tube current profiles. The purpose of this work is to perform the measurements and simulations to validate a Monte Carlo model under a variety of test conditions where fixed tube current (FTC) and TCM were used. METHODS: A previously developed MC model for estimating dose from CT scans that models TCM, built using the platform of mcnpx, was used for CT dose quantification. In order to validate the suitability of this model to accurately simulate patient dose from FTC and TCM CT scan, measurements and simulations were compared over a wide range of conditions. Phantoms used for testing range from simple geometries with homogeneous composition (16 and 32 cm computed tomography dose index phantoms) to more complex phantoms including a rectangular homogeneous water equivalent phantom, an elliptical shaped phantom with three sections (where each section was a homogeneous, but different material), and a heterogeneous, complex geometry anthropomorphic phantom. Each phantom requires varying levels of x-, y- and z-modulation. Each phantom was scanned on a multidetector row CT (Sensation 64) scanner under the conditions of both FTC and TCM. Dose measurements were made at various surface and depth positions within each phantom. Simulations using each phantom were performed for FTC, detailed x-y-z TCM, and z-axis-only TCM to obtain dose estimates. This allowed direct comparisons between measured and simulated dose values under each condition of phantom, location, and scan to be made. RESULTS: For FTC scans, the percent root mean square (RMS) difference between measurements and simulations was within 5% across all phantoms. For TCM scans, the percent RMS of the difference between measured and simulated values when using detailed TCM and z-axis-only TCM simulations was 4.5% and 13.2%, respectively. For the anthropomorphic phantom, the difference between TCM measurements and detailed TCM and z-axis-only TCM simulations was 1.2% and 8.9%, respectively. For FTC measurements and simulations, the percent RMS of the difference was 5.0%. CONCLUSIONS: This work demonstrated that the Monte Carlo model developed provided good agreement between measured and simulated values under both simple and complex geometries including an anthropomorphic phantom. This work also showed the increased dose differences for z-axis-only TCM simulations, where considerable modulation in the x-y plane was present due to the shape of the rectangular water phantom. Results from this investigation highlight details that need to be included in Monte Carlo simulations of TCM CT scans in order to yield accurate, clinically viable assessments of patient dosimetry.