Synthesis of cobalt phosphide hybrid for simultaneous electrochemical detection of ascorbic acid, dopamine, and uric acid.

Ascorbic acid (AA), dopamine (DA), and uric acid (UA) are important biomarkers for the clinical screening of diseases. However, the simultaneous determination of these three analytes is still challenging. Herein, we report a facile metal-organic framework (MOF)-derived method to synthesize a cobalt phosphide (Co2P) hybrid for the simultaneous electrochemical detection of AA, DA and UA. The introduction of highly dispersed Co2P nanoparticles onto a P, N-doped porous carbon matrix is responsible for providing abundant active sites and facilitating electron transfer, thereby contributing to the improved electrocatalytic performance of the hybrid. Well-resolved oxidation peaks and an enhanced current response for the simultaneous oxidation of AA, DA, and UA were achieved using a Co2P hybrid-modified screen-printed electrode (Co2P hybrid-SPE) with the differential pulse voltammetry (DPV) method. The detection limits for AA, DA, and UA in simultaneous detection were calculated as 17.80 µM, 0.018 µM, and 0.068 µM (S/N = 3), respectively. Furthermore, the feasibility of using Co2P hybrid-SPE for the simultaneous detection of AA, DA, and UA in real serum samples was also confirmed.

Microarray Chip and Method for Simultaneous and Highly Consistent Electroporation of Multiple Cells of Different Sizes.

Cell electroporation is an important cell manipulation technology to artificially transfer specific extracellular components into cells. However, the consistency of substance transport during the electroporation process is still an issue due to the wide size distribution of the natural cells. In this study, a cell electroporation microfluidic chip based on a microtrap array is proposed. The microtrap structure was optimized for single-cell capture and electric field focusing. The effects of the cell size on the cell electroporation in the microchip were investigated through simulation and experiment methods using the giant unilamellar vesicle as the simplified cell model, and a numerical model of a uniform electric field was used as a comparison. Compared with the uniform electric field, a lower threshold electric field is required to induce electroporation and produces a higher transmembrane voltage on the cell under a specific electric field in the microchip, showing an improvement in cell viability and electroporation efficiency. The larger perforated area produced on the cells in the microchip under a specific electric field allows a higher substance transfer efficiency, and the electroporation results are less affected by the cell size, which is beneficial for improving substance transfer consistency. Furthermore, the relative perforation area increases with the decrease of the cell diameter in the microchip, which is exactly opposite to that in a uniform electric field. By manipulating the electric field applied to the microtrap individually, a consistent proportion of substance transfer during electroporation of cells with different sizes can be achieved.

Studying the roles of salt ions in the pore initiation and closure stages in the biomembrane electroporation.

Electroporation shows great potential in biology and biomedical applications. However, there is still a lack of reliable protocol for cell electroporation to achieve a high perforation efficiency due to the unclear influence mechanism of various factors, especially the salt ions in buffer solution. The tiny membrane structure of a cell and the electroporation scale make it difficult to monitor the electroporation process. In this study, we used both molecular dynamics (MD) simulation and experimental methods to explore the influence of salt ions on the electroporation process. Giant unilamellar vesicles (GUVs) were constructed as the model, and sodium chloride (NaCl) was selected as the representative salt ion in this study. The results show that the electroporation process follows lag-burst kinetics, where the lag period first appears after applying the electric field, followed by a rapid pore expansion. For the first time, we find that the salt ion plays opposite roles in different stages of the electroporation process. The accumulation of salt ions near the membrane surface provides an extra potential to promote the pore initiation, while the charge screening effect of the ions within the pore increases the line tension of the pore to induce the instability of the pore and lead to the closure. The GUV electroporation experiments obtain qualitatively consistent results with MD simulations. This work can provide guidance for the selection of parameters for cell electroporation process.

Trapping and releasing of single microparticles and cells in a microfluidic chip.

A microfluidic device was designed and fabricated to capture single microparticles and cells by using hydrodynamic force and selectively release the microparticles and cells of interest via negative dielectrophoresis by activating selected individual microelectrodes. The trap microstructure was optimized based on numerical simulation of the electric field as well as the flow field. The capture and selective release functions of the device were verified by multi-types microparticles with different diameters and K562 cells. The capture efficiencies/release efficiencies were 95.55% ± 0.43%/96.41% ± 1.08% and 91.34% ± 0.01%/93.67% ± 0.36% for microparticles and cells, respectively. By including more traps and microelectrodes, the device can achieve high throughput and realize the visual separation of microparticles/cells of interest in a large number of particle/cell groups.

Applications of Microfluidics in Liquid Crystal-Based Biosensors.

Liquid crystals (LCs) with stimuli-responsive configuration transition and optical anisotropic properties have attracted enormous interest in the development of simple and label-free biosensors. The combination of microfluidics and the LCs offers great advantages over traditional LC-based biosensors including small sample consumption, fast analysis and low cost. Moreover, microfluidic techniques provide a promising tool to fabricate uniform and reproducible LC-based sensing platforms. In this review, we emphasize the recent development of microfluidics in the fabrication and integration of LC-based biosensors, including LC planar sensing platforms and LC droplets. Fabrication and integration of LC-based planar platforms with microfluidics for biosensing applications are first introduced. The generation and entrapment of monodisperse LC droplets with different microfluidic structures, as well as their applications in the detection of chemical and biological species, are then summarized. Finally, the challenges and future perspectives of the development of LC-based microfluidic biosensors are proposed. This review will promote the understanding of microfluidic techniques in LC-based biosensors and facilitate the development of LC-based microfluidic biosensing devices with high performance.

Microsphere-Based Microfluidic Device for Plasma Separation and Potential Biochemistry Analysis Applications.

The development of a simple, portable, and cost-effective plasma separation platform for blood biochemical analysis is of great interest in clinical diagnostics. We represent a plasma separation microfluidic device using microspheres with different sizes as the separation barrier. This plasma separation device, with 18 capillary microchannels, can extract about 3 µL of plasma from a 50 µL blood sample in about 55 min. The effects of evaporation and the microsphere barrier on the plasma biochemical analysis results were studied. Correction factors were applied to compensate for these two effects. The feasibility of the device in plasma biochemical analysis was validated with clinical blood samples.

A Continuous Cell Separation and Collection Approach on a Microfilter and Negative Dielectrophoresis Combined Chip.

Cell separation plays an important role in the fields of analytical chemistry and biomedicine. To solve the blockage problem and improve the separation throughput in the traditional microstructure filtration-based separation approach, a continuous cell separation and collection approach via micropost array railing on a microfilter and negative dielectrophoresis combined chip is proposed. By tilting the micropost array at a certain angle, microparticles or cells enter the collection area under micropost array railing. The effects of the inclination angle of the micropost array and the electrode distance on the microparticle collection efficiency were investigated. Based on the optimized microfluidic chip structure, 37- and 16.3-µm particles were collected with 85% and 89% efficiencies, respectively. Additionally, algal cells were separated and collected by using the optimized microchip. The chip also had good separation and collection effects on biological samples, which effectively solved the blockage problem and improved the separation throughput, laying a foundation for subsequent microstructure filtration separation-based research and application.

Multi-channel surface plasmon resonance biosensor using prism-based wavelength interrogation.

A portable multi-channel surface plasmon resonance (SPR) biosensor device using prism-based wavelength interrogation is presented. LEDs were adopted as a simple and inexpensive light source, providing a stable spectrum bandwidth for the SPR system. The parallel light was obtained by a collimated unit and illuminated on the sensing chip at a specific angle. A simple, compact and cost-effective spectrometer part constituted of a series of lenses and a prism was designed for the collection of reflected light. Using the multi-channel microfluidic chip as the sensing component, spectral images of multiple tests could be acquired simultaneously, improving the signal processing and detection throughput. Different concentrations of sodium chloride aqueous solution were used to calibrate the device. The linear detection range was 4.32 × 10-2 refractive index units (RIU) and the limit of detection was 6.38 × 10-5 RIU. Finally, the performance of the miniaturized SPR system was evaluated by the detection of immunoglobulin G (IgG).

Deterministic Lateral Displacement-Based Separation of Magnetic Beads and Its Applications of Antibody Recognition.

This work presents a magnetic-driven deterministic lateral displacement (m-DLD) microfluidic device. A permanent magnet located at the outlet of the microchannel was used to generate the driving force. Two stages of mirrored round micropillar array were designed for the separation of magnetic beads with three different sizes in turn. The effects of the forcing angle and the inlet width of the micropillar array on the separating efficiency were studied. The m-DLD device with optimal structure parameters shows that the separating efficiencies for the 10 µm, 20 µm and 40 µm magnetic beads are 87%, 89% and 94%, respectively. Furthermore, this m-DLD device was used for antibody recognition and separation among a mixture solution of antibodies. The trajectories of different kinds of magnetic beads coupled with different antigens showed that the m-DLD device could realize a simple and low-cost diagnostic test.

An ultra-low frictional interface combining FDTS SAMs with molybdenum disulfide.

Interfacial friction is of crucial importance to ensure the friction-reducing and anti-wear properties of mechanical microstructures in micro/nanoelectromechanical systems (MEMS/NEMS). An ultra-low frictional interface combining hydrophobic 1H,1H,2H,2H-perfluorodecyltrichlorosilane (FDTS) self-assembled monolayers (SAMs) coated on an AFM tip with mechanically exfoliated molybdenum disulfide (MoS2) nanosheets deposited on a planar Si/SiO2 substrate was achieved. The FDTS SAMs/MoS2 interface between the FDTS SAMs and the MoS2 nanosheets exhibits an ultra-low friction force that is independent of the relative humidity. The incommensurate contact with ultra-low energy dissipation between FDTS and MoS2 nanosheets and hydrophobic surface properties lead to this ultra-low frictional FDTS SAMs/MoS2 interface. Also, the MoS2 nanosheets have a high elastic modulus, which gives them a smaller contact area than the FDTS SAMs and contributes to the low friction. The excellent hydrophobic properties of both the FDTS SAMs and MoS2 enable them to be unaffected by the relative humidity by preventing the capillary interaction. This study paves the way for extensive applications in reducing the friction of nanoscale contact interfaces.

Liquid Crystal Droplet-Embedded Biopolymer Hydrogel Sheets for Biosensor Applications.

The development of simple, portable, and low-cost biosensing platforms is of great interest in the clinical diagnosis of disease. Here, we report liquid crystal (LC) droplet-embedded chitosan (CHI) hydrogel films formed by the Ag(+) ion-triggered fast gelation of the CHI/surfactant complex-stabilized LC emulsion which is cast on substrates. The small sheets cut from the LC droplet-embedded hydrogel films combine the advantages of both hydrogels and LC droplets, offering a portable and label-free sensing platform for the real-time detection of bile acids in a small amount of solution. We find that the response time and detection limit of LC droplet-embedded hydrogel sheets for bile acids depend on their chemical structures.

Design of ß-CD-surfactant complex-coated liquid crystal droplets for the detection of cholic acid via competitive host-guest recognition.

ß-CD-C14TAB complex-coated 5CB droplets are designed by the adsorption of ß-CD-C14TAB complexes at the 5CB/aqueous interface. We show that the 5CB droplets can be used as an optical probe for the selective detection of cholic acid in aqueous solution containing uric acid and urea via competitive host-guest recognition.

Protein-induced configuration transitions of polyelectrolyte-modified liquid crystal droplets.

Liquid crystal (LC) droplets dispersed in aqueous solution have emerged as an optical probe for sensing the adsorption and interaction of biological species at the LC/aqueous interface. In this paper, we modify the surface of 4-n-pentyl-4'-cyanobiphenyl (5CB) LC droplets by the adsorption of positively charged poly(diallyldimethylammonium chloride) (PDADMAC) and poly(ethylenimine) (PEI) with different molecular weights at the 5CB/water interface. The PDADMAC and PEI-modified 5CB droplets show a radial director configuration in aqueous solution with salt concentrations above 150 mM. The adsorption of negatively charged bovine serum albumin (BSA) on the positively charged PDADMAC and PEI-modified 5CB droplets through electrostatic interaction can induce the radial-to-bipolar configuration transition of the 5CB inside the droplets. We find that the concentration of BSA required to induce the configuration transition increases linearly with the decrease of the molecular weight of PDAMAC and PEI. Our results highlight the capability of the director configuration of LC droplets as an optical probe for sensing the interaction between proteins and polyelectrolytes at the LC/aqueous interface.