S-Block Metal Mg-Mediated Co─N─C as Efficient Oxygen Electrocatalyst for Durable and Temperature-Adapted Zn-Air Batteries.

In the quest to enhance Zn-air batteries (ZABs) for operating across a wide spectrum of temperatures, synthesizing robust oxygen electrocatalysts is paramount. Conventional strategies focusing on orbital hybridization of d-d and p-d aim to moderate the excessive interaction between the d-band of the transition metal active site and oxygen intermediate, yet often yield suboptimal performance. Herein, an innovative s-block metal modulation is reported to refine the electronic structure and catalytic behavior of Co─NC catalysts. Employing density functional theory (DFT) calculations, it is revealed that incorporating Mg markedly depresses the d-band center of Co sites, thereby fine-tuning the adsorption energy of the oxygen reduction reaction (ORR) intermediate. Consequently, the Mg-modified Co─NC catalyst (MgCo─NC) unveils remarkable intrinsic ORR activity with a significantly reduced activation energy (Ea) of 10.0 kJ mol-1, outstripping the performance of both Co─NC (17.6 kJ mol-1), benchmark Pt/C (15.9 kJ mol-1), and many recent reports. Moreover, ZABs outfitted with the finely tuned Mg0.1Co0.9─NC realize a formidable power density of 157.0 mW cm-2, paired with an extremely long cycle life of 1700 h, and an exceptionally minimal voltage gap decay rate of 0.006 mV h-1. Further, the Mg0.1Co0.9─NC-based flexible ZAB presents a mere 2% specific capacity degradation when the temperature fluctuates from 25 to -20 °C, underscoring its robustness and suitability for practical deployment in diverse environmental conditions.

Kanatzidisite: A Natural Compound with Distinctive van der Waals Heterolayered Architecture.

New minerals have long been a source of inspiration for the design and discovery. Many quantum materials, including superconductors, quantum spin liquids, and topological materials, have been unveiled through mineral samples with unusual structure types. In this report, we present kanatzidisite, a new naturally occurring material with formula [BiSbS3]2[Te2] and monoclinic symmetry (space group of P21/m) with lattice parameters a = 4.0021(5) Å, b = 3.9963(5) Å, c = 21.1009(10) Å, and ß = 95.392(3)°. The mineral exhibits a unique structure consisting of alternating BiSbS3 double van der Waals layers and distorted [Te] square nets essentially forming an array of parallel zigzag Te chains. Our theoretical calculations suggest that the band structure of kanatzidisite may exhibit topological features characteristic of a Dirac semimetal.

Atomistic Insights into the Origin of High-Performance Thermoelectric Response in Hybrid Perovskites.

Due to their tantalizing prospect of heat-electricity interconversion, hybrid organic-inorganic perovskites have sparked considerable research interests recently. Nevertheless, understanding their complex interplay between the macroscopic properties, nonintuitive transport processes, and basic chemical structures still remains far from completion, although it plays a fundamental role in systematic materials development. On the basis of multiscale first-principles calculations, this understanding is herein advanced by establishing a comprehensive picture consisting of atomic and charge dynamics. It is unveiled that the ultralow room-temperature lattice thermal conductivity (≈0.20 W m-1 K-1 ) of hybrid perovskites is critical to their decent thermoelectric figure of merit (≈0.34), and such phonon-glass behavior stems from not only the inherent softness but also the strong anharmonicity. It is identified that the 3D electrostatic interaction and hydrogen-bonded networks between the PbI3- cage and embedded cations result in the strongly coupled motions of inorganic framework and cation, giving rise to their high degree of anharmonicity. Furthermore, such coupled motions bring about low-frequency optical vibrational modes, which leads to the dominant role of electron scattering with optical phonons in charge transport. It is expected that these new atomistic-level insights offer a standing point where the performance of thermoelectric perovskites can be further enhanced.

Three-Component Donor-π-Acceptor Covalent-Organic Frameworks for Boosting Photocatalytic Hydrogen Evolution.

Two-dimensional covalent-organic frameworks (2D COFs) have recently emerged as great prospects for their applications as new photocatalytic platforms in solar-to-hydrogen conversion; nevertheless, their inefficient solar energy capture and fast charge recombination hinder the improvement of photocatalytic hydrogen production performance. Herein, two photoactive three-component donor-π-acceptor (TCDA) materials were constructed using a multicomponent synthesis strategy by introducing electron-deficient triazine and electron-rich benzotrithiophene moieties into frameworks through sp2 carbon and imine linkages, respectively. Compared with two-component COFs, the novel TCDA-COFs are more convenient in regulating the inherent photophysical properties, thereby realizing outstanding photocatalytic activity for hydrogen evolution from water. Remarkably, the first sp2 carbon-linked TCDA-COF displays an impressive hydrogen evolution rate of 70.8 ± 1.9 mmol g-1 h-1 with excellent reusability in the presence of 1 wt % Pt under visible-light illumination (420-780 nm). Utilizing the combination of diversified spectroscopy and theoretical prediction, we show that the full π-conjugated linkage not only effectively broadens the visible-light harvesting of COFs but also enhances charge transfer and separation efficiency.

Application of ARE-reporter systems in drug discovery and safety assessment.

The human body is continuously exposed to xenobiotics and internal or external oxidants. The health risk assessment of exogenous chemicals remains a complex and challenging issue. Alternative toxicological test methods have become an essential strategy for health risk assessment. As a core regulator of constitutive and inducible expression of antioxidant response element (ARE)-dependent genes, nuclear factor erythroid 2-related factor 2 (Nrf2) plays a critical role in maintaining cellular redox homeostasis. Consistent with the properties of Nrf2-mediated antioxidant response, Nrf2-ARE activity is a direct indicator of oxidative stress and thus has been used to identify and characterize oxidative stressors and redox modulators. To screen and distinguish chemicals or environmental insults that affect the cellular antioxidant activity and/or induce oxidative stress, various in vitro cell models expressing distinct ARE reporters with high-throughput and high-content properties have been developed. These ARE-reporter systems are currently widely applied in drug discovery and safety assessment. In the present review, we provide an overview of the basic structures and applications of various ARE-reporter systems employed for discovering Nrf2-ARE modulators and characterizing oxidative stressors.

Photocatalytic Hydrogen Production on a sp2 -Carbon-Linked Covalent Organic Framework.

Two-dimensional covalent organic frameworks (2D-COFs) have emerged as attractive platforms for solar-to-chemical energy conversion. In this study, we have implemented a gradient heating strategy to synthesize a sp2 -carbon-linked triazine-based COF, COF-JLU100, exhibiting high crystallinity, large surface area, good durability and carrier mobility for solar-driven photocatalytic hydrogen evolution. The Pt-doped COF-JLU100 demonstrated a high hydrogen evolution rate of over 100 000 µmol g-1 h-1 for water splitting under visible-light illumination (λ>420 nm). Experimental and theoretical studies corroborate that the cyano-vinylene segments in COF-JLU100 extend the π-delocalization and enable fast charge transfer and separation rates as well as good dispersion in water. Moreover, COF-JLU100 can be prepared by low-cost and easily available monomers and has excellent stability, which is desirable for practical solar-driven hydrogen production.

Neutral Antiaromatic Bis(1,2-dithiolene)-Chelated Nickel Complexes Bearing Multiradical Characters.

Metal-organic complexes with radical characteristics are unique species attracting immense attention in recent years due to their peculiar properties and promising applicability in a wide variety of innovative research fields. However, the reported complexes typically do not exceed diradicality. This study systematically investigates a series of square planar neutral Ni-bis(1,2-dithiolene) and Ni-bis(1,2-dioxolene) complexes with linear, branched, and macrocyclic configurations via ab initio calculations. The linear Ni-complexes display strong singlet diradical characters, while their branched counterparts can also exhibit moderate singlet multiradical characters. Importantly, the macrocyclic Ni-complexes can possess extremely strong singlet multiradical characters up to dodeca-radicality along with their global antiaromaticity and hence strong induced ring current in the presence of an external magnetic field, ascribed to the localization of unpaired α and ß electrons residing in the highest few molecular orbitals at different molecular sites, minimizing their coupling and annihilation. Our work represents the first indication in the rational design of novel multiradical neutral antiaromatic macrocyclic complexes for potential applications in molecular machines and electronic devices.

Gate-Defined Quantum Confinement in CVD 2D WS2.

Temperature-dependent transport measurements are performed on the same set of chemical vapor deposition (CVD)-grown WS2 single- and bilayer devices before and after atomic layer deposition (ALD) of HfO2 . This isolates the influence of HfO2 deposition on low-temperature carrier transport and shows that carrier mobility is not charge impurity limited as commonly thought, but due to another important but commonly overlooked factor: interface roughness. This finding is corroborated by circular dichroic photoluminescence spectroscopy, X-ray photoemission spectroscopy, cross-sectional scanning transmission electron microscopy, carrier-transport modeling, and density functional modeling. Finally, electrostatic gate-defined quantum confinement is demonstrated using a scalable approach of large-area CVD-grown bilayer WS2 and ALD-grown HfO2 . The high dielectric constant and low leakage current enabled by HfO2 allows an estimated quantum dot size as small as 58 nm. The ability to lithographically define increasingly smaller devices is especially important for transition metal dichalcogenides due to their large effective masses, and should pave the way toward their use in quantum information processing applications.

Electronic transport descriptors for the rapid screening of thermoelectric materials.

The discovery of novel materials for thermoelectric energy conversion has potential to be accelerated by data-driven screening combined with high-throughput calculations. One way to increase the efficacy of successfully choosing a candidate material is through its evaluation using transport descriptors. Using a data-driven screening, we selected 12 potential candidates in the trigonal ABX2 family, followed by charge transport property simulations from first principles. The results suggest that carrier scattering processes in these materials are dominated by ionised impurities and polar optical phonons, contrary to the oft-assumed acoustic-phonon-dominated scattering. Using these data, we further derive ground-state transport descriptors for the carrier mobility and the thermoelectric powerfactor. In addition to low carrier mass, high dielectric constant was found to be an important factor towards high carrier mobility. A quadratic correlation between dielectric constant and transport performance was established and further validated with literature. Looking ahead, dielectric constant can potentially be exploited as an independent criterion towards improved thermoelectric performance. Combined with calculations of thermal conductivity including Peierls and inter-branch coherent contributions, we conclude that the trigonal ABX2 family has potential as high performance thermoelectrics in the intermediate temperature range for low grade waste heat harvesting.

Designing Intrinsic Topological Insulators in Two-Dimensional Metal-Organic Frameworks.

The connection between electronic structures of metal-organic frameworks (MOFs) and their building subunits is a key cornerstone for rational MOF material design. Some two-dimensional conjugated MOFs were reported to be topological insulators. However, many of them are not intrinsic as the Fermi levels are far from the topological gaps. The subunit-to-MOF electronic orbital correspondence should be established to bridge their chemical structure and physical properties, thus understanding the design rules toward intrinsic topological insulators. Herein we reveal the fundamental role of the subunit-to-MOF symmetry relation in determining their orbital interaction and hybridization and, consequently, topological characteristics. In particular, such honeycomb-kagome MOFs possess delocalized symmetry-enforced nonbonding electronic states with the topological spin-orbit gap. The nonbonding nature of these states allows tailored band structure modulation through molecular structure and strain engineering, with the potential realization of an intrinsic metal-organic topological insulator.

Boosting Electrocatalytic Activity of 3d-Block Metal (Hydro)oxides by Ligand-Induced Conversion.

The 3d-transition-metal (hydro)oxides belong to a group of highly efficient, scalable and inexpensive electrocatalysts for widespread energy-related applications that feature easily tailorable crystal and electronic structures. We propose a general strategy to further boost their electrocatalytic activities by introducing organic ligands into the framework, considering that most 3d-metal (hydro)oxides usually exhibit quite strong binding with reaction intermediates and thus compromised activity due to the scaling relations. Involving weakly bonded ligands downshifts the d-band center, which narrows the band gap, and optimizes the adsorption of these intermediates. For example, the activity of the oxygen evolution reaction (OER) can be greatly promoted by ≈5.7 times over a NiCo layered double hydroxide (LDH) after a terephthalic acid (TPA)-induced conversion process, arising from the reduced energy barrier of the deprotonation of OH* to O*. Impressively, the proposed ligand-induced conversion strategy is applicable to a series of 3d-block metal (hydro)oxides, including NiFe2 O4 , NiCo2 O4 , and NiZn LDH, providing a general structural upgrading scheme for existing high-performance electrocatalytic systems.

Enabling Superior Sodium Capture for Efficient Water Desalination by a Tubular Polyaniline Decorated with Prussian Blue Nanocrystals.

The application of electrochemical energy storage materials to capacitive deionization (CDI), a low-cost and energy-efficient technology for brackish water desalination, has recently been proven effective in solving problems of traditional CDI electrodes, i.e., low desalination capacity and incompatibility in high salinity water. However, Faradaic electrode materials suffer from slow salt removal rate and short lifetime, which restrict their practical usage. Herein, a simple strategy is demonstrated for a novel tubular-structured electrode, i.e., polyaniline (PANI)-tube-decorated with Prussian blue (PB) nanocrystals (PB/PANI composite). This composite successfully combines characteristics of two traditional Faradaic materials, and achieves high performance for CDI. Benefiting from unique structure and rationally designed composition, the obtained PB/PANI exhibits superior performance with a large desalination capacity (133.3 mg g-1 at 100 mA g-1 ), and ultrahigh salt-removal rate (0.49 mg g-1 s-1 at 2 A g-1 ). The synergistic effect, interfacial enhancement, and desalination mechanism of PB/PANI are also revealed through in situ characterization and theoretical calculations. Particularly, a concept for recovery of the energy applied to CDI process is demonstrated. This work provides a facile strategy for design of PB-based composites, which motivates the development of advanced materials toward high-performance CDI applications.

The Effect of Interleukin-6 (IL-6), Interleukin-11 (IL-11), Signal Transducer and Activator of Transcription 3 (STAT3), and AKT Signaling on Adipocyte Proliferation in a Rat Model of Polycystic Ovary Syndrome.

BACKGROUND Polycystic ovary syndrome (PCOS) is associated with low-grade inflammation, adipocyte hypertrophy, hyperglycemia, increased serum testosterone levels, and reduced lipolysis. This study aimed to investigate the role of interleukin-6 (IL-6) and IL-11 in the pathophysiology of adipocyte hypertrophy in a rat model of PCOS. MATERIAL AND METHODS The rat model of PCOS was developed using a subcutaneous injection of dehydroepiandrosterone (DHEA). Histology of the rat ovaries was used to confirm the development of PCOS. Serum levels of testosterone and glucose were measured. Immunohistochemistry, immunofluorescence, quantitative real-time polymerase chain reaction (qRT-PCR), and Western blot were performed to measure IL-6 and IL-11 in the rat model of PCOS. Cell proliferation was measured using the cell counting kit-8 (CCK-8) assay. RESULTS Serum levels of testosterone and glucose and the expression of IL-6 and IL-11 were significantly increased in the rat model of PCOS via the activation of AKT/STAT3 signaling. Following IL-6 and IL-11 stimulation of mesenchymal adipocytes isolated from adipose tissue, IL-6 and IL-11 induced cell proliferation through the STAT3/AKT signaling pathway. CONCLUSIONS In a rat model of PCOS, increased expression of IL-6 and IL-11 was associated with the AKT/STAT3 pathway. Increased levels of IL-6 and IL-11 stimulated adipocytes from adipose tissue of the rat model, which promoted cell proliferation by activating AKT/STAT3 signaling.

Unprecedented Enhancement of Thermoelectric Power Factor Induced by Pressure in Small-Molecule Organic Semiconductors.

Establishing the relationship between pressure and heat-electricity interconversion in van der Waals bonded small-molecule organic semiconductors is critical not only in designing flexible thermoelectric materials, but also in developing organic electronics. Here, based on first-principles calculations and using naphthalene as a case study, an unprecedented elevation of p-type thermoelectric power factor induced by pressure is demonstrated; and the power factor increases by 267% from 159.5 µW m-1 K-2 under ambient conditions to 585.8 µW m-1 K-2 at 2.1 GPa. The underlying mechanism is attributed to the dramatic inhibition of lattice-vibration-caused electronic scattering. Furthermore, it is revealed that both restraining low-frequency intermolecular vibrational modes and increasing intermolecular electronic coupling are two essential factors that effectively suppress the electron-phonon scattering. From the standpoint of molecular design, these two conditions can be achieved by extending the π-conjugated backbones, introducing long alkyl sidechains to the π-cores, and substituting heteroatoms in the π-cores.

Orbital-Engineering-Based Screening of π-Conjugated d8 Transition-Metal Coordination Polymers for High-Performance n-Type Thermoelectric Applications.

Extraordinary progress has been achieved in polymer-based thermoelectric materials in recent years. New emerging π-conjugated transition-metal coordination polymers are one of the best n-type polymer-based thermoelectric materials. However, the microscopic descriptions on geometric structures, orbital characteristics, and most importantly, thermoelectric properties remain elusive, which has seriously hampered the experimentalists to draw a straightforward design strategy for new n-type polymer-based thermoelectric materials. Herein, we assess the n-type thermoelectric properties of 20 π-conjugated d8 metal center coordination polymers and rationalize their thermoelectric properties in terms of molecular geometry, orbital nature, and electron-phonon coupling based on first-principles calculations. An explicit screening rule for high-performance n-type π-conjugated transition-metal coordination polymeric thermoelectric materials was found, i.e., smaller metal center d orbital component ratio in the conduction band minimum, weaker electron-phonon coupling, higher intrinsic mobility, and thereby higher thermoelectric power factor can be achieved. Guided by this rule, poly(Pd-C2S4) and poly(Ni-C2Se4) show very high power factors. We built a map of high-performance π-conjugated transition-metal coordination polymers for n-type thermoelectric applications, which will help to accelerate the screening and design of innovative n-type thermoelectric polymers.

Orbital-dependent Electron-Hole Interaction in Graphene and Associated Multi-Layer Structures.

We develop an orbital-dependent potential to describe electron-hole interaction in materials with structural 2D character, i.e. quasi-2D materials. The modulated orbital-dependent potentials are also constructed with non-local screening, multi-layer screening, and finite gap due to the coupling with substrates. We apply the excitonic Hamiltonian in coordinate-space with developed effective electron-hole interacting potentials to compute excitons' binding strength at M (π band) and Γ (σ band) points in graphene and its associated multi-layer forms. The orbital-dependent potential provides a range-separated property for regulating both long- and short-range interactions. This accounts for the existence of the resonant π exciton in single- and bi-layer graphenes. The remarkable strong electron-hole interaction in σ orbitals plays a decisive role in the existence of σ exciton in graphene stack at room temperature. The interplay between gap-opening and screening from substrates shed a light on the weak dependence of σ exciton binding energy on the thickness of graphene stacks. Moreover, the analysis of non-hydrogenic exciton spectrum in quasi-2D systems clearly demonstrates the remarkable comparable contribution of orbital dependent potential with respect to non-local screening process. The understanding of orbital-dependent potential developed in this work is potentially applicable for a wide range of materials with low dimension.