ABSTRACT
In this work, we propose a new protocol for producing model microplastics from an industrial polymer and compare it to a conventional method, cryomilling. Polypropylene industrial pellets were chosen due to their widespread production and frequent presence in the environment, making them a notable source of microplastics. Both protocols start with aging under Ultra-Violet light of the pellets but differ in the subsequent mechanical stress applied-strong vs. soft-to break down the photodegraded pellets into microplastics. All generated particles were fully characterized in terms of size, shape, oxidation rate, and stability in aqueous media. Microplastics produced via cryomilling exhibited significant size and oxidation heterogeneity and tended to aggregate in water. Although the new protocol involving soft mechanical stress required a longer preparation time, it simulated more accurately the environmental degradation of raw plastic. This method successfully produced oxidized microplastics with a controlled size distribution centered around 50⯵m which remained stable in water without stabilizers.
ABSTRACT
Biobased waterborne latexes were synthesized by miniemulsion radical copolymerization of a biosourced ß-myrcene (My) terpenic monomer and styrene (S). Biobased amphiphilic copolymers were designed to act as stabilizers of the initial monomer droplets and the polymer colloids dispersed in the water phase. Two types of hydrophilic polymer backbones were hydrophobically modified by terpene molecules to synthesize two series of amphiphilic copolymers with various degrees of substitution. The first series consists of poly(acrylic acid) modified with tetrahydrogeraniol moieties (PAA-g-THG) and the second series is based on the polysaccharide carboxymethylpullulan amino-functionalized with dihydromyrcenol moieties (CMP-g-(NH-DHM)). The produced waterborne latexes with diameters between 160 and 300 nm and were composed of polymers with varying glass transition temperatures (Tg, PMy = -60 °C, Tg, P(My-co-S) = -14 °C, Tg, PS = 105 °C) depending on the molar fraction of biobased ß-myrcene (fMy,0 = 0, 0.43, or 1). The latexes successfully stabilized dodecane-in-water and water-in-dodecane emulsions for months at all compositions. The waterborne latexes composed of low Tg poly(ß-myrcene) caused interesting different behavior during drying of the emulsions compared to polystyrene latexes.
Subject(s)
Latex , Polymers , Acyclic Monoterpenes , Alkenes , Emulsifying Agents , Emulsions , Excipients , WaterABSTRACT
Development of carbon neutral and sustainable energy sources should be considered as a top priority solution for the growing worldwide energy demand. Photovoltaics are a strong candidate, more specifically, organic photovoltaics (OPV), enabling the design of flexible, lightweight, semitransparent, and low-cost solar cells. However, the active layer of OPV is, for now, mainly deposited from chlorinated solvents, harmful for the environment and for human health. Active layers processed from health and environmentally friendly solvents have over recent years formed a key focus topic of research, with the creation of aqueous dispersions of conjugated polymer nanoparticles arising. These nanoparticles are formed from organic semiconductors (molecules and macromolecules) initially designed for organic solvents. The topic of nanoparticle OPV has gradually garnered more attention, up to a point where in 2018 it was identified as a "trendsetting strategy" by leaders in the international OPV research community. Hence, this review has been prepared to provide a timely roadmap of the formation and application of aqueous nanoparticle dispersions of active layer components for OPV. We provide a thorough synopsis of recent developments in both nanoprecipitation and miniemulsion for preparing photovoltaic inks, facilitating readers in acquiring a deep understanding of the crucial synthesis parameters affecting particle size, colloidal concentration, ink stability, and more. This review also showcases the experimental levers for identifying and optimizing the internal donor-acceptor morphology of the nanoparticles, featuring cutting-edge X-ray spectromicroscopy measurements reported over the past decade. The different strategies to improve the incorporation of these inks into OPV devices and to increase their efficiency (to the current record of 7.5%) are reported, in addition to critical design choices of surfactant type and the advantages of single-component vs binary nanoparticle populations. The review naturally culminates by presenting the upscaling strategies in practice for this environmentally friendly and safer production of solar cells.
ABSTRACT
High molar masses homopolymers of both acrylamide (AM) and 2-acrylamido-2-methylpropanesulfonate (AMPS) as well as poly(AM-stat-AMPS) exhibiting a large range copolymer composition has been obtained via the optimization of a purely adiabatic gel process. Monomer concentrations ranging from 2.0 to 3.47 M have been successfully tested while keeping the control of the molar masses up to 5 × 106 g mol-1. The products have been characterized in terms of molecular mass and viscosimetric properties.
ABSTRACT
The present study aims in the understanding of the effect of oligo(ethylene glycol)-based biocompatible microgels inner structure on the encapsulation/release mechanisms of different types of cosmetic active molecules. For that, multi-responsive microgels were synthesized using three types of cross-linkers: ethylene glycol dimethacrylate (EGDMA), oligo(ethylene glycol) diacrylate (OEGDA) and N,N-methylenebisacrylamide (MBA). The inner morphology of the microgels synthesized was studied by 1H-nuclear magnetic resonance (1H NMR) and small-angle neutron scattering (SANS) techniques and no effect of cross-linker type on microgel microstructure was observed in the case of analysing purified microgel dispersions. Moreover, all the microgels synthesized presented conventional swelling/de-swelling behavior as a function of temperature and pH. Two hydrophobic, one hydrophilic, and one macromolecule as cosmetic active molecules were effectively loaded into different microgel particles via hydrophobic interactions and hydrogen-bonding interactions between -OH groups of active molecules and ether oxygens of different microgel particles. Their release profiles as a function of cross-linker type used and encapsulated amounts were studied by Peppas-Sahlin model. No effect of the cross-linker type was observed due to the similar inner structure of all the microgels synthesized.
Subject(s)
Biocompatible Materials/chemistry , Cosmetics/metabolism , Ethylene Glycol/chemistry , Gels/chemistry , Macromolecular Substances/metabolism , Cross-Linking Reagents/chemistry , HumansABSTRACT
In the last 10 years, asymmetrical flow field flow fractionation (AF4) has been one of the most promising approaches to characterize colloidal particles. Nevertheless, despite its potentialities, it is still considered a complex technique to set up, and the theory is difficult to apply for the characterization of complex samples containing submicron particles and nanoparticles. In the present work, we developed and propose a simple analytical strategy to rapidly determine the presence of several submicron populations in an unknown sample with one programmed AF4 method. To illustrate this method, we analyzed polystyrene particles and fullerene aggregates of size covering the whole colloidal size distribution. A global and fast AF4 method (method O) allowed us to screen the presence of particles with size ranging from 1 to 800 nm. By examination of the fractionating power F d, as proposed in the literature, convenient fractionation resolution was obtained for size ranging from 10 to 400 nm. The global F d values, as well as the steric inversion diameter, for the whole colloidal size distribution correspond to the predicted values obtained by model studies. On the basis of this method and without the channel components or mobile phase composition being changed, four isocratic subfraction methods were performed to achieve further high-resolution separation as a function of different size classes: 10-100 nm, 100-200 nm, 200-450 nm, and 450-800 nm in diameter. Finally, all the methods developed were applied in characterization of nanoplastics, which has received great attention in recent years. Graphical Absract Characterization of the nanoplastics by asymmetrical flow field flow fractionation within the colloidal size range.