A recipe for plastic: Expert insights on plastic additives in the marine environment.

The production and consumption of plastic products had been steadily increasing over the years, leading to more plastic waste entering the environment. Plastic pollution is ubiquitous and comes in many types and forms. To enhance or modify their properties, chemical additives are added to plastic items during manufacturing. The presence and leakage of these additives, from managed and mismanaged plastic waste, into the environment are of growing concern. In this study, we gauged, via an online questionnaire, expert knowledge on the use, characteristics, monitoring and risks of plastic additives to the marine environment. We analysed the survey results against actual data to identify and prioritise risks and gaps. Participants also highlighted key factors for future consideration, including gaining a deeper understanding of the use and types of plastic additives, how they leach throughout the entire lifecycle, their toxicity, and the safety of alternative options. More extensive chemical regulation and an evaluation of the essentiality of their use should also be considered.

A comprehensive assessment of plastic remediation technologies.

The global presence of plastic litter and its accumulation in the environment has become an issue of concern to the public and policymakers. This concern has triggered innovators in past decades to design and develop a multitude of remediation technologies to prevent plastic from entering the environment, or to clean up legacy litter. This study aims to (i) systematically review the current scientific literature on plastic remediation technologies, (ii) create a 'plastic clean-up and prevention overview' illustrating 124 remediation technologies and 29 characteristics, (iii) qualitatively analyse their key characteristics (e.g., fields of application, targeted plastic), and (iv) investigate challenges and opportunities of clean-up technologies for inland waterways (e.g., canals, rivers) and ports. We identified 61 scientific publications on plastic remediation technologies, until June 2022. Thirty-four of these studies were published within the last three years, demonstrating a growing interest. The presented overview indicates that inland waterways are, so far, the preferred field of application, with 22 technologies specifically designed for cleaning up plastics from inland waterways, and 52 additional ones with the potential to be installed in these locations. Given the importance of clean-up technologies in inland waterways, we highlighted their strengths, weaknesses, opportunities, and threats (SWOT). Our results indicate that, despite the challenges, these technologies provide essential prospects, from improving the environmental quality to raising awareness. Our study is instrumental as it illustrates an up-to-date overview and provides a comprehensive analysis of current in design phase, testing, and in use plastic remediation technologies.

Explorative study on scale cortisol accumulation in wild caught common dab (Limanda limanda).

BACKGROUND: Flatfish live in a diverse marine ecosystem that is changing due to natural variations and anthropogenic influences. These changes can evoke a stress response mainly resulting in production of the glucocorticoid cortisol, which mediates effects on various levels of biological organization. The finding that cortisol accumulates in fish scales, offering a retrospective view on cortisol production, provides opportunities to use this matrix for chronic stress assessment. The present study is the first to gather information on scale cortisol concentration in wild-caught common dab (Limanda limanda), based on a two-pronged approach using (1) field measurements and (2) a laboratory in vivo-study where wild-caught dab were fed by cortisol-spiked feed during 30 or 90 days to demonstrate the possible accumulation of cortisol in the scales and to evaluate its impact on fish health. RESULTS: Based on the field measurements, the average scale cortisol concentration in wild-caught fish was 0.0034 ± 0.0046 µg kg-1 scale (n = 67). This indicates that wild common dab is indeed able to incorporate cortisol in the scales. Based on the experimental data, the cortisol-fed fish showed an increased plasma cortisol concentration (80.16 ± 82.58 µg L-1) compared to the control group (4.54 ± 9.57 µg L-1) after 30 days of cortisol feeding. The increase in plasma cortisol concentration was positively correlated with an increased cortisol concentration in the scale after 30 days of cortisol-spiked feeding. This correlation was, however, no longer observed after 90 days of cortisol-spiked feeding. Interestingly, cortisol concentration of the scales on the pigmented side was significantly higher compared to the non-pigmented side. Some health parameters such as epidermal thickness, body condition and Ichthyobodo sp. parasitic infection showed a correlation with scale cortisol concentration after 30 days. CONCLUSIONS: We have demonstrated that common dab is able to accumulate cortisol in its scales. This seems to occur proportionally to circulating concentrations of plasma cortisol in fish fed with cortisol supplemented feed after 30 days.

Microplastic detection and identification by Nile red staining: Towards a semi-automated, cost- and time-effective technique.

Microplastic pollution is an issue of concern due to the accumulation rates in the marine environment combined with the limited knowledge about their abundance, distribution and associated environmental impacts. However, surveying and monitoring microplastics in the environment can be time consuming and costly. The development of cost- and time-effective methods is imperative to overcome some of the current critical bottlenecks in microplastic detection and identification, and to advance microplastics research. Here, an innovative approach for microplastic analysis is presented that combines the advantages of high-throughput screening with those of automation. The proposed approach used Red Green Blue (RGB) data extracted from photos of Nile red-fluorescently stained microplastics (50-1200 µm) to train and validate a 'Plastic Detection Model' (PDM) and a 'Polymer Identification Model' (PIM). These two supervised machine learning models predicted with high accuracy the plastic or natural origin of particles (95.8%), and the polymer types of the microplastics (88.1%). The applicability of the PDM and the PIM was demonstrated by successfully using the models to detect (92.7%) and identify (80%) plastic particles in spiked environmental samples that underwent laboratorial processing. The classification models represent a semi-automated, high-throughput and reproducible method to characterize microplastics in a straightforward, cost- and time-effective yet reliable way.

Plastic pollution pathways from marine aquaculture practices and potential solutions for the North-East Atlantic region.

Aquaculture practices at sea are far from impact neutral and remain an important source of marine plastic pollution. With projected rapid continual growth in the sector, if left unmanaged, aquaculture pollution can have detrimental environmental and social implications. Using the DPSIR framework, the paper examines current practices and pathways of plastic pollution from marine aquaculture in the NE-Atlantic, drawing on findings from literature, stakeholder consultations and beach litter assessments. Pathways for aquaculture-related litter identified include rough weather, farmer behavior, inadequate access to recycling facilities, low price of consumable plastics and high cost of recycling. Beach litter analyses conducted as part of the study exposed serious issues of under quantification, resulting from difficulties in source identification and a lack of detailed categorization in official monitoring systems. The paper makes recommendations to improve litter quantification and waste management, including the use of local knowledge and experts to identify sources of marine litter.

INFLUENCE OF PATHOGENS, FISH-RELATED CHARACTERISTICS, AND ENVIRONMENTAL FACTORS ON THE DEVELOPMENT OF SKIN ULCERATIONS IN WILD COMMON DAB (LIMANDA LIMANDA) FROM THE NORTH SEA.

Environmental changes or stressors can result in the development of diseases. Through regular fish disease surveys in the Belgian part of the North Sea, attention was drawn to a sudden increase of skin ulceration prevalence between 2011 and 2014 in common dab (Limanda limanda). Information on prevalence, ulceration, bacteriology, fish-related (e.g., length, age, and sex) and (spatial and temporal) environmental factors, and fishing intensity were gathered. This detailed investigation was framed within a long-term monitoring program, executed every spring-autumn from 2000 to present. Ulcerations were observed in 1.3% of fish (n=3,999). Spatial and temporal differences were evident, and highest prevalence was found in summer. Vibrio was the dominant cultivated bacterial genus present in the lesions. Skin ulcerations appeared to be correlated with length and body condition of the fish, as well as with temperature and pH of the seawater and fishing vessel density. Our research suggested the involvement of multiple factors in the development of skin ulcerations in common dab and endorsed the effects of changing environment and human influence on the marine ecosystem through activities such as fishing.

Fragmentation of plastic objects in a laboratory seawater microcosm.

We studied the fragmentation of conventional thermoplastic and compostable plastic items in a laboratory seawater microcosm. In the microcosm, polyurethane foams, cellulose acetate cigarette filters, and compostable polyester and polylactic acid items readily sank, whereas polyethylene air pouches, latex balloons, polystyrene foams and polypropylene cups remained afloat. Microbial biofilms dominated by Cyanobacteria, Proteobacteria, Planctomycetes and Bacteriodetes grew on the plastics, and caused some of the polyethylene items to sink to the bottom. Electrical resistances (ER) of plastic items decreased as function of time, an indication that seawater had penetrated into microscopic crevices in the plastic that had developed over time. Rate constants for ER decrease in polyethylene items in the microcosm were similar to tensile elongation decrease of polyethylene sheets floating in sea, measured previously by others. Weight loss of plastic items was ≤ 1% per year for polyethylene, polystyrene and polypropylene, 3-5% for latex, polyethylene terephthalate and polyurethane, 15% for cellulose acetate, and 7-27% for polyester and polylactic acid compostable bags. The formation of microplastics observed in the microcosm was responsible for at least part of the weight loss. This study emphasizes the need to obtain experimental data on plastic litter degradation under conditions that are realistic for marine environments.

Reporting Guidelines to Increase the Reproducibility and Comparability of Research on Microplastics.

The ubiquitous pollution of the environment with microplastics, a diverse suite of contaminants, is of growing concern for science and currently receives considerable public, political, and academic attention. The potential impact of microplastics in the environment has prompted a great deal of research in recent years. Many diverse methods have been developed to answer different questions about microplastic pollution, from sources, transport, and fate in the environment, and about effects on humans and wildlife. These methods are often insufficiently described, making studies neither comparable nor reproducible. The proliferation of new microplastic investigations and cross-study syntheses to answer larger scale questions are hampered. This diverse group of 23 researchers think these issues can begin to be overcome through the adoption of a set of reporting guidelines. This collaboration was created using an open science framework that we detail for future use. Here, we suggest harmonized reporting guidelines for microplastic studies in environmental and laboratory settings through all steps of a typical study, including best practices for reporting materials, quality assurance/quality control, data, field sampling, sample preparation, microplastic identification, microplastic categorization, microplastic quantification, and considerations for toxicology studies. We developed three easy to use documents, a detailed document, a checklist, and a mind map, that can be used to reference the reporting guidelines quickly. We intend that these reporting guidelines support the annotation, dissemination, interpretation, reviewing, and synthesis of microplastic research. Through open access licensing (CC BY 4.0), these documents aim to increase the validity, reproducibility, and comparability of studies in this field for the benefit of the global community.

Effect of xenon and dexmedetomidine as adjuncts for general anesthesia on postoperative emergence delirium after elective cardiac catheterization in children: study protocol for a randomized, controlled, pilot trial.

BACKGROUND: Emergence delirium, a manifestation of acute postoperative brain dysfunction, is frequently observed after pediatric anesthesia and has been associated with the use of sevoflurane. Both xenon and dexmedetomidine possess numerous desirable properties for the anesthesia of children with congenital heart disease, including hemodynamic stability, lack of neurotoxicity, and a reduced incidence of emergence delirium. Combining both drugs has never been studied as a balanced-anesthesia technique. This combination allows the provision of anesthesia without administering anesthetic drugs against which the Food and Drug Administration (FDA) issued a warning for the use in young children. METHODS/DESIGN: In this phase-II, mono-center, prospective, single-blinded, randomized, controlled pilot trial, we will include a total of 80 children aged 0-3 years suffering from congenital heart disease and undergoing general anesthesia for elective diagnostic and/or interventional cardiac catheterization. Patients are randomized into two study groups, receiving either a combination of xenon and dexmedetomidine or mono-anesthesia with sevoflurane for the maintenance of anesthesia. The purpose of this study is to estimate the effect size for xenon-dexmedetomidine versus sevoflurane anesthesia with respect to the incidence of emergence delirium in children. We will also describe group differences for a variety of secondary outcome parameters including peri-interventional hemodynamics, emergence characteristics, incidence of postoperative vomiting, and the feasibility of a combined xenon-dexmedetomidine anesthesia in children. DISCUSSION: Sevoflurane is the most frequently used anesthetic in young children, but has been indicated as an independent risk factor in the development of emergence delirium. Xenon and dexmedetomidine have both been associated with a reduction in the incidence of emergence delirium. Combining xenon and dexmedetomidine has never been described as a balanced-anesthesia technique in children. Our pilot study will therefore deliver important data required for future prospective clinical trials. TRIAL REGISTRATION: EudraCT, 2018-002258-56. Registered on 20 August 2018. https://www.clinicaltrialsregister.eu.

Pinpointing the role of Aeromonas salmonicida in the development of skin ulcerations in common dab (Limanda limanda).

Aeromonas salmonicida was isolated from ulcerations in common dab (Limanda limanda). An experiment was performed to pinpoint its role in ulceration development, considering the importance of the skin barrier and the pigmented and non-pigmented sides. The skin of dab was treated in three zones, one where scales and epidermis were removed, one where mucus was discarded and one non-treated zone. Fish were tagged to allow individual identification and challenged with A. salmonicida. Mortality and severity of the developing lesions were recorded for 21 days post-inoculation. Starting 12 days post-inoculation, mortality occurred gradually in challenged fish; however, no direct cause could be established. Both control fish and challenged fish developed ulcerations containing A. salmonicida. Sequencing of vapA gene revealed that isolates retrieved from both groups were distinct, suggesting the presence of A. salmonicida prior to the trial. Most ulcerations developed in zones where skin was removed, suggesting that abrasion might be a predisposing factor in ulceration development. Ulcerations were also observed at the insertion site of the tag, where exposed muscle tissue might have favoured the development of ulcerations. In conclusion, A. salmonicida seems to be involved in the development of skin ulcerations in dab, although the exact pathogenesis needs to be elucidated.

Scrutinizing the triad of Vibrio tapetis, the skin barrier and pigmentation as determining factors in the development of skin ulcerations in wild common dab (Limanda limanda).

Recently, Vibrio tapetis was isolated for the first time from skin ulcerations in wild-caught common dab (Limanda limanda). To further examine its role in the development of these skin lesions, an in vivo experiment was performed. The significance of the skin barrier and in addition the difference between pigmented and non-pigmented side were investigated. Hence, the skin of common dab was treated in three different ways on both the pigmented and non-pigmented side. On a first "treatment zone", the scales and overlying epidermal tissue were removed whereas in a second zone only the mucus was discarded. The third zone served as a non-treated zone. Thereafter, fish were challenged with V. tapetis. The control group was sham treated. Mortality, clinical signs, severity and size of the developing lesions were recorded. All animals were sacrificed and sampled 21 days post-inoculation. Significantly more fish of the group challenged with V. tapetis died compared to the control group with the highest incidence occurring 4 days post-inoculation. Fish challenged with V. tapetis developed more severe skin ulcerations. In zones where scales and epidermal tissue were removed, the ulcerations were more severe compared to zones where only mucus was eliminated. Ulcerations occurred more frequently, were more severe and larger on the pigmented side. Our data represents prove of V. tapetis as causative agent of ulcerative skin lesions although prior damage of the skin seems to be a major contributing factor. Furthermore, the pigmented side seemed predisposed to the development of skin ulcerations.

Bioaccumulation of PCBs from microplastics in Norway lobster (Nephrops norvegicus): An experimental study.

Plastic debris acts as a sorbent phase for hydrophobic organic compounds like polychlorinated biphenyls (PCBs). Chemical partitioning models predict that the ingestion of microplastics with adsorbed chemicals in the field will tend not to result in significant net desorption of the chemical to the organism's tissues. This is expected due to the often limited differences in fugacity of the chemical between the indigestible plastic materials and the tissues, which are typically already exposed in the same environment to the same chemicals as the plastic. However laboratory trials validating these model predictions are scarce. In this study, PCB-loaded microplastics were offered to field-collected Norway lobsters (Nephrops norvegicus) during in vivo feeding laboratory experiments. Each ingestion experiment was repeated with and without loading a mixture of ten PCB congeners onto plastic microspheres (MS) made of polyethylene (PE) and polystyrene (PS) with diameters of either 500-600 µm or 6 µm. We observed that the presence of chemicals adsorbed to ingested microplastics did not lead to significant bioaccumulation of the chemicals in the exposed organisms. There was a limited uptake of PCBs in Nephrops tail tissue after ingestion of PCB-loaded PE MS, while almost no PCBs were detected in animals exposed to PS MS. In general, our results demonstrated that after 3 weeks of exposure the ingestion of plastic MS themselves did not affect the nutritional state of wild Nephrops.

Temporal Dynamics of Bacterial and Fungal Colonization on Plastic Debris in the North Sea.

Despite growing evidence that biofilm formation on plastic debris in the marine environment may be essential for its biodegradation, the underlying processes have yet to be fully understood. Thus, far, bacterial biofilm formation had only been studied after short-term exposure or on floating plastic, yet a prominent share of plastic litter accumulates on the seafloor. In this study, we explored the taxonomic composition of bacterial and fungal communities on polyethylene plastic sheets and dolly ropes during long-term exposure on the seafloor, both at a harbor and an offshore location in the Belgian part of the North Sea. We reconstructed the sequence of events during biofilm formation on plastic in the harbor environment and identified a core bacteriome and subsets of bacterial indicator species for early, intermediate, and late stages of biofilm formation. Additionally, by implementing ITS2 metabarcoding on plastic debris, we identified and characterized for the first time fungal genera on plastic debris. Surprisingly, none of the plastics exposed to offshore conditions displayed the typical signature of a late stage biofilm, suggesting that biofilm formation is severely hampered in the natural environment where most plastic debris accumulates.

Chemical analyses of dredged spoil disposal sites at the Belgian part of the North Sea.

The chemical status of five dredged spoil disposal sites in the Belgian Part of the North Sea is evaluated. A linear mixed-effect model was applied to PCB, PAH and heavy metal data from 2005 to 2014. No decrease in PCB concentrations was found, with even an increase at two disposal sites. Hg/AL ratios increased with 62% at one disposal site (BR&WS2) from 2005 to 2006 to 2013-2014. Cu and Zn concentrations increased at two disposal sites. Additional harbour sampling suggests that the latter is possibly linked to antifouling paints. Based on OSPAR environmental assessment criteria, the current chemical status of the sites suggests no chronic effect of dredged spoil disposal. However, increasing time trend data for PCB, Hg, Cu and Zn demonstrate the importance of monitoring to identify adverse trends.

Microplastic contamination in brown shrimp (Crangon crangon, Linnaeus 1758) from coastal waters of the Southern North Sea and Channel area.

This study assessed the capability of Crangon crangon (L.), an ecologically and commercially important crustacean, of consuming plastics as an opportunistic feeder. We therefore determined the microplastic content of shrimp in shallow water habitats of the Channel area and Southern part of the North Sea. Synthetic fibers ranging from 200µm up to 1000µm size were detected in 63% of the assessed shrimp and an average value of 0.68±0.55microplastics/g w. w. (1.23±0.99microplastics/shrimp) was obtained for shrimp in the sampled area. The assessment revealed no spatial patterns in plastic ingestion, but temporal differences were reported. The microplastic uptake was significantly higher in October compared to March. The results suggest that microplastics >20µm are not able to translocate into the tissues.

A critical view on microplastic quantification in aquatic organisms.

Microplastics, plastic particles and fragments smaller than 5mm, are ubiquitous in the marine environment. Ingestion and accumulation of microplastics have previously been demonstrated for diverse marine species ranging from zooplankton to bivalves and fish, implying the potential for microplastics to accumulate in the marine food web. In this way, microplastics can potentially impact food safety and human health. Although a few methods to quantify microplastics in biota have been described, no comparison and/or intercalibration of these techniques have been performed. Here we conducted a literature review on all available extraction and quantification methods. Two of these methods, involving wet acid destruction, were used to evaluate the presence of microplastics in field-collected mussels (Mytilus galloprovincialis) from three different "hotspot" locations in Europe (Po estuary, Italy; Tagus estuary, Portugal; Ebro estuary, Spain). An average of 0.18±0.14 total microplastics g(-1) w.w. for the Acid mix Method and 0.12±0.04 total microplastics g(-1) w.w. for the Nitric acid Method was established. Additionally, in a pilot study an average load of 0.13±0.14 total microplastics g(-1) w.w. was recorded in commercial mussels (Mytilus edulis and M. galloprovincialis) from five European countries (France, Italy, Denmark, Spain and The Netherlands). A detailed analysis and comparison of methods indicated the need for further research to develop a standardised operating protocol for microplastic quantification and monitoring.

Bacterial Community Profiling of Plastic Litter in the Belgian Part of the North Sea.

Bacterial colonization of marine plastic litter (MPL) is known for over four decades. Still, only a few studies on the plastic colonization process and its influencing factors are reported. In this study, seafloor MPL was sampled at different locations across the Belgian part of the North Sea to study bacterial community structure using 16S metabarcoding. These marine plastic bacterial communities were compared with those of sediment and seawater, and resin pellets sampled on the beach, to investigate the origin and uniqueness of plastic bacterial communities. Plastics display great variation of bacterial community composition, while each showed significant differences from those of sediment and seawater, indicating that plastics represent a distinct environmental niche. Various environmental factors correlate with the diversity of MPL bacterial composition across plastics. In addition, intrinsic plastic-related factors such as pigment content may contribute to the differences in bacterial colonization. Furthermore, the differential abundance of known primary and secondary colonizers across the various plastics may indicate different stages of bacterial colonization, and may confound comparisons of free-floating plastics. Our studies provide insights in the factors that shape plastic bacterial colonization and shed light on the possible role of plastic as transport vehicle for bacteria through the aquatic environment.

A qualitative screening and quantitative measurement of organic contaminants on different types of marine plastic debris.

Chemical compounds present on plastic were characterised on different types of plastic litter and beached pellets, using a general GC-MS screening method. A variety of plastic related compounds, such as building blocks, antioxidants, additives and degradation products, were identified next to diverse environmental pollutants and biofilm compounds. A validated method for the analysis of PAHs and PCBs on beached pellets at the Belgian Coast, showed concentrations of ∑ 16 EPA-PAHs of 1076-3007 ng g(-1) plastic, while the concentrations of ∑ 7 OSPAR-PCBs ranged from 31 to 236 ng g(-1) plastic. The wide variety of plastic compounds retrieved in the general screening showed the importance of plastic as a potential source of contaminants and their degradation products.

Microplastics in sediments: A review of techniques, occurrence and effects.

Microplastics are omnipresent in the marine environment and sediments are hypothesized to be major sinks of these plastics. Here, over 100 articles spanning the last 50 year are reviewed with following objectives: (i) to evaluate current microplastic extraction techniques, (ii) to discuss the occurrence and worldwide distribution of microplastics in sediments, and (iii) to make a comprehensive assessment of the possible adverse effects of this type of pollution to marine organisms. Based on this review we propose future research needs and conclude that there is a clear need for a standardized techniques, unified reporting units and more realistic effect assessments.

Characterization of the dominant bacterial communities during storage of Norway lobster and Norway lobster tails (Nephrops norvegicus) based on 16S rDNA analysis by PCR-DGGE.

The aim of this study was to investigate the microbial quality of whole Norway lobster (Nephrops norvegicus) and Norway lobster tails to optimize handling conditions. This was done by assessing the total viable count (TVC) and characterizing the dominant microbiota. The cultivable microorganisms were quantified via classical microbiological plating methods. To characterize as many bacterial species present as possible, we performed advanced molecular identification techniques (PCR-DGGE). The initial TVC of fresh Norway lobster meat was high (3.0 log cfu/g) as compared to fish. No significant difference between whole Norway lobster and Norway lobster tails could be found during the storage period. From day 6 of storage, a significant difference between Plate Count Agar (PCA) and Marine Agar (MA) was observed. The microbiota of Norway lobster was dominated by members of the Gram-negative genera such as Psychrobacter spp., Pseudoalteromonas spp., Pseudomonas spp., Luteimonas spp., and Aliivibrio spp. From these bacteria, mainly Psychrobacter spp. and Pseudomonas spp. remained present until the end of the storage period. These are known spoilage organisms in fishery products. Other known spoilage organisms of crustaceans such as Photobacterium spp. could not be identified.