ABSTRACT
Efficient doubled haploid (DH) plant production is of great interest in the plant breeding industry and research because homozygous lines are obtained within a single generation shortening the breeding cycle substantially. DH protocol development can be a time- and resource-consuming process due to numerous factors affecting its success and efficiency. Here we present concepts and examples about how critical success factors can be identified throughout a DH protocol and an early microspore response monitored by simple impedance flow cytometry (IFC) measurements, which will help to optimize each step of an androgenesis-based DH protocol.
Subject(s)
Flow Cytometry/methods , Technology/methods , Electric Impedance , Haploidy , Plant Breeding/methods , Plants/geneticsABSTRACT
Impedance flow cytometry (IFC) is a versatile lab-on-chip technology which enables fast and label-free analysis of pollen grains in various plant species, promising new research possibilities in agriculture and plant breeding. Hazelnut is a monoecious, anemophilous species, exhibiting sporophytic self-incompatibility. Its pollen is dispersed by wind in midwinter when temperatures are still low and relative humidity is usually high. Previous research found that hazelnut can be characterized by high degrees of pollen sterility following a reciprocal chromosome translocation occurring in some cultivated genotypes. In this study, IFC was used for the first time to characterize hazelnut pollen biology. IFC was validated via dye exclusion in microscopy and employed to (i) follow pollen hydration over time to define the best pre-hydration treatment for pollen viability evaluation; (ii) test hazelnut pollen viability and sterility on 33 cultivars grown in a collection field located in central Italy, and two wild hazelnuts. The accessions were also characterized by their amount and distribution of catkins in the tree canopy. Pollen sterility rate greatly varied among hazelnut accessions, with one main group of highly sterile cultivars and a second group, comprising wild genotypes and the remaining cultivars, producing good quality pollen. The results support the hypothesis of recurring reciprocal translocation events in Corylus avellana cultivars, leading to the observed gametic semi-sterility. The measured hazelnut pollen viability was also strongly influenced by pollen hydration (R adj 2 = 0.83, P ≤ 0.0001) and reached its maximum at around 6 h of pre-hydration in humid chambers. Viable and dead pollen were best discriminated at around the same time of pollen pre-hydration, suggesting that high humidity levels are required for hazelnut pollen to maintain its functionality. Altogether, our results detail the value of impedance flow cytometry for high throughput phenotyping of hazelnut pollen. Further research is required to clarify the causes of pollen sterility in hazelnut, to confirm the role of reciprocal chromosome translocations and to investigate its effects on plant productivity.
ABSTRACT
The determination of cell viability is essential to many areas of life sciences and biotechnology. Typically, cell viability measurements are based on the optical analysis of stained cells, which requires additional labeling steps and is hard to implement online. Frequency-dependent impedance flow cytometry (IFC) provides a label-free, fast, and reliable alternative to determine cell viability at the single cell level based on the Coulter principle. Here, we describe the application of IFC to eukaryotic cell cultures and compare the results to commonly used staining methods. Yeast cell parameters were assessed in normal and heat-inactivated cells as well as in alcoholic fermentation and long-term batch cultures providing a precise and fast determination of the cell viability and further quantitative measures of the cell culture status. As an important new application, we have investigated recombinant protein production in the widely used baculovirus insect cell expression system. The IFC analysis revealed the presence of a subpopulation of cells, which correlates with the protein expression yield, but it is not detectable with conventional optical cell counters. We tentatively identify this subpopulation as cells in the late phase of infection. Their detection can serve as a predictor for the optimal time point of harvest. The IFC technique should be generally applicable to many eukaryotic cell cultures in suspension, possibly also implemented online.
Subject(s)
Cell Culture Techniques/methods , Cell Survival , Electric Impedance , Eukaryotic Cells/physiology , Flow Cytometry/methods , Animals , Cells, Cultured , Insecta , Saccharomyces cerevisiae , Time FactorsABSTRACT
Analyzing pollen quality in an efficient and reliable manner is of great importance to the industries involved in seed and fruit production, plant breeding, and plant research. Pollen quality parameters, viability and germination capacity, are analyzed by various staining methods or by in vitro germination assays, respectively. These methods are time-consuming, species-dependent, and require a lab environment. Furthermore, the obtained viability data are often poorly related to in vivo pollen germination and seed set. Here, we describe a quick, label-free method to analyze pollen using microfluidic chips inserted into an impedance flow cytometer (IFC). Using this approach, pollen quality parameters are determined by a single measurement in a species-independent manner. The advantage of this protocol is that pollen viability and germination can be analyzed quickly by a reliable and standardized method.
Subject(s)
Flow Cytometry/methods , Pollen/physiology , Germination/physiology , Lab-On-A-Chip Devices , Pollination/physiologyABSTRACT
INTRODUCTION: An efficient and reliable method to estimate plant cell viability, especially of pollen, is important for plant breeding research and plant production processes. Pollen quality is determined by classical methods, like staining techniques or in vitro pollen germination, each having disadvantages with respect to reliability, analysis speed, and species dependency. Analysing single cells based on their dielectric properties by impedance flow cytometry (IFC) has developed into a common method for cellular characterisation in microbiology and medicine during the last decade. The aim of this study is to demonstrate the potential of IFC in plant cell analysis with the focus on pollen. METHOD: Developing and mature pollen grains were analysed during their passage through a microfluidic chip to which radio frequencies of 0.5 to 12 MHz were applied. The acquired data provided information about the developmental stage, viability, and germination capacity. The biological relevance of the acquired IFC data was confirmed by classical staining methods, inactivation controls, as well as pollen germination assays. RESULTS: Different stages of developing pollen, dead, viable and germinating pollen populations could be detected and quantified by IFC. Pollen viability analysis by classical FDA staining showed a high correlation with IFC data. In parallel, pollen with active germination potential could be discriminated from the dead and the viable but non-germinating population. CONCLUSION: The presented data demonstrate that IFC is an efficient, label-free, reliable and non-destructive technique to analyse pollen quality in a species-independent manner.
Subject(s)
Flow Cytometry/methods , Germination , Pollen/cytology , Single-Cell Analysis/methods , Capsicum/cytology , Capsicum/growth & development , Cell Survival , Cucumis sativus/cytology , Cucumis sativus/growth & development , Electric Impedance , Lab-On-A-Chip Devices , Radio Waves , Solanum/cytology , Solanum/growth & development , Nicotiana/cytology , Nicotiana/growth & developmentABSTRACT
When examined, the expansion of many stem cell classes has been shown to be facilitated by mechanically-regulated calcium entry from the extracellular space that also helps direct their developmental programs towards mechanosensitive tissues such as muscle, bone, and connective tissues. Cation channels of the transient receptor potential C class (TRPC) are the predominant conduit for calcium entry into proliferating myoblasts. Nonetheless, methods to non-invasively study this calcium-entry pathway are still in their infancy. Here we show that a microfluidic configuration of impedance-based flow cytometry (IFC) provides a method to detect TRP channel expression in cells at high throughput. Using this technology we discern changes in the IFC signal that correlates with the functional expression of TRPC1 channels and coincides with cell proliferation. Pharmacological agents, mechanical conditions or malignant states that alter the expression of TRPC1 channels are reflected in the IFC signal accordingly, whereas pharmacological agents that alter cation-permeation through TRPC1 channels, or ionophores that independently increase calcium entry across the membrane, have little effect. Our results suggest that IFC detects changes in whole-cell membrane organization associated with TRPC1 activation and surface expression, rather than cation permeation through the channel per se. IFC-based technologies thus have the potential to identify living stem cells in their earliest stages of expansion without staining or chemical fixation.
Subject(s)
Cell Proliferation/genetics , Flow Cytometry/methods , Neoplasms/pathology , TRPC Cation Channels/biosynthesis , Calcium/chemistry , Calcium/metabolism , Cell Differentiation/genetics , Cell Proliferation/drug effects , Electric Impedance , Gene Expression Regulation, Neoplastic/drug effects , Humans , Myoblasts/metabolism , Neoplasms/diagnosis , Stem Cells/pathology , TRPC Cation Channels/geneticsABSTRACT
Free-standing lipid bilayers in nano- and micro-pores are interesting membrane models and attractive for biotechnological applications. We describe here the controlled preparation of proteo-lipid mono- and bilayers using the Langmuir-Schaefer transfer or Langmuir-Blodgett technique, respectively on hydrophobic and hydrophilic surfaces. We demonstrate the formation of suspended proteo-lipid layers by Transmission Electron Microscopy (TEM) and in situ Atomic Force Microscopy (AFM) imaging. Using Annexin-A5 as a membrane-associated protein, continuous proteo-lipid mono- and bilayers were formed, which span pore arrays over areas of several square-micrometers. The 2D organization of proteins associated to lipid monolayer is well preserved during the transfer process and the protein association is Ca(2+)-dependent and therefore reversible. The simple formation and reliable transfer of stabilized free-standing lipid films is a first crucial step to create biomimetic membranes for biotechnological applications and membrane protein research.
Subject(s)
Annexin A5/chemistry , Lipid Bilayers/chemistry , Hydrophobic and Hydrophilic Interactions , Microscopy, Atomic Force , Microscopy, Electron, TransmissionABSTRACT
Impedance flow cytometry (IFC) was evaluated as a possible alternative to fluorescence-based methods for on-line quality monitoring of hybridoma cells. Hybridoma cells were cultured at different cell densities and viability was estimated by means of IFC and fluorescence-based flow cytometry (FCM). Cell death was determined by measuring the impedance phase value at high frequency in low conductivity buffer. IFC data correlate well with reference FCM measurements using AnnexinV and 7-AAD staining. Hybridoma cells growing at different densities in cell culture revealed a density-dependent subpopulation pattern. Living cells of high density cultures show reduced impedance amplitudes, indicating particular cellular changes. Dead cell subpopulations become evident in cultures with increasing cell densities. In addition, a novel intermediate subpopulation, which most probably represents apoptotic cells, was identified. These results emphasize the extraordinary sensitivity of high frequency impedance measurements and their suitability for hybridoma cell culture quality control.
Subject(s)
Cell Culture Techniques/methods , Flow Cytometry/methods , Hybridomas/pathology , Microfluidic Analytical Techniques/methods , Animals , Cell Culture Techniques/instrumentation , Cell Death , Flow Cytometry/instrumentation , Fluorescence , Mice , Microfluidic Analytical Techniques/instrumentation , Quality Control , SoftwareABSTRACT
Microfabricated flow cytometers can detect, count, and analyze cells or particles using microfluidics and electronics to give impedance-based characterization. Such systems are being developed to provide simple, low-cost, label-free, and portable solutions for cell analysis. Recent work using microfabricated systems has demonstrated the capability to analyze micro-organisms, erythrocytes, leukocytes, and animal and human cell lines. Multifrequency impedance measurements can give multiparametric, high-content data that can be used to distinguish cell types. New combinations of microfluidic sample handling design and microscale flow phenomena have been used to focus and position cells within the channel for improved sensitivity. Robust designs will enable focusing at high flowrates while reducing requirements for control over multiple sample and sheath flows. Although microfluidic impedance-based flow cytometers have not yet or may never reach the extremely high throughput of conventional flow cytometers, the advantages of portability, simplicity, and ability to analyze single cells in small populations are, nevertheless, where chip-based cytometry can make a large impact.