Determination of plastic polyester oligomers in real samples and their bioeffects.

Plastics are ubiquitously, becoming part of our everyday life. Recently, the issue of human exposure to micro- and nanoplastic particles and potentially resulting toxicological consequences has been broached, triggered by the discovery of microplastics in foodstuff and dietary exposure via contaminated food and beverages. Within this EU-FORA fellowship project, a determination and quantification of plastic polyester plastics oligomers in food samples was performed to assess exposure at these categories of 'nanoplastics', evaluating them as potential contaminants or as indicators and marker compounds of the exposure to specific nanoplastics/microplastics from polyesters, such as polyethylene terephthalate (PET) and polybutylene terephthalate (PBT). UHPLC-TOF-MS/MS analysis has been set-up for 10 PET and PBT oligomers and analysis has been performed in foods and drinks. Moreover, the project focused also on the effects of these oligomers in in vitro and ex vivo experiments. These data would be combined with EFSA Comprehensive Food Consumption Database, for the exposure and risk assessment of these 'Nanoplastics'.

Nano- and microplastics commonly cause adverse impacts on plants at environmentally relevant levels: A systematic review.

Over the last years there has been significant research on the presence and effects of plastics in terrestrial systems. Here we summarize current research findings on the effects of nano- and microplastics (NMPs) on terrestrial plants, with the aim to determine patterns of response and sensitive endpoints. We conducted a systematic review (based on 78 studies) on the effects of NMPs on germination, plant growth and biochemical biomarkers. This review highlights that the majority of studies to date have used pristine polystyrene or polyethylene particles, either in a hydroponic or pot-plant setup. Based on these studies we found that effects on plants are widespread. We noted similar responses between and within monocots and dicots to NMPs, except for consistent lower germination seen in dicots exposed to NMPs. During early development, germination and root growth are more strongly affected compared to shoot growth. NMPs induced similar adverse growth effects on plant biomass and length in the most tested plant species (lettuce, wheat, corn, and rice) irrespective of the polymer type and size used. Moreover, biomarker responses were consistent across species; chlorophyll levels were commonly negatively affected, while stress indicators (e.g., ROS or free radicals) and stress respondents (e.g., antioxidant enzymes) were consistently upregulated. In addition, effects were commonly observed at environmentally relevant levels. These findings provide clear evidence that NMPs have wide-ranging impacts on plant performance. However, as most studies have been conducted under highly controlled conditions and with pristine plastics, there is an urgent need to test under more environmentally realistic conditions to ensure the lab-based studies can be extrapolated to the field.

Joint optimization of land carbon uptake and albedo can help achieve moderate instantaneous and long-term cooling effects.

Both carbon dioxide uptake and albedo of the land surface affect global climate. However, climate change mitigation by increasing carbon uptake can cause a warming trade-off by decreasing albedo, with most research focusing on afforestation and its interaction with snow. Here, we present carbon uptake and albedo observations from 176 globally distributed flux stations. We demonstrate a gradual decline in maximum achievable annual albedo as carbon uptake increases, even within subgroups of non-forest and snow-free ecosystems. Based on a paired-site permutation approach, we quantify the likely impact of land use on carbon uptake and albedo. Shifting to the maximum attainable carbon uptake at each site would likely cause moderate net global warming for the first approximately 20 years, followed by a strong cooling effect. A balanced policy co-optimizing carbon uptake and albedo is possible that avoids warming on any timescale, but results in a weaker long-term cooling effect.

Non-Thermal Plasma Treatment Influences Shoot Biomass, Flower Production and Nutrition of Gerbera Plants Depending on Substrate Composition and Fertigation Level.

Non-thermal plasma (NTP) appears a promising strategy for supporting crop protection, increasing yield and quality, and promoting environmental safety through a decrease in chemical use. However, very few NTP applications on containerized crops are reported under operational growing conditions and in combination with eco-friendly growing media and fertigation management. In this work, NTP technology is applied to the nutrient solution used for the production of gerbera plants grown in peat or green compost, as an alternative substrate to peat, and with standard or low fertilization. NTP treatment promotes fresh leaf and flower biomass production in plants grown in peat and nutrient adsorption in those grown in both substrates, except for Fe, while decreasing dry plant matter. However, it causes a decrease in the leaf and flower biomasses of plants grown in compost, showing a substrate-dependent effect under a low fertilization regime. In general, the limitation in compost was probably caused by the high-substrate alkalinization that commonly interferes with gerbera growth. Under low fertilization, a reduction in the photosynthetic capacity further penalizes plant growth in compost. A lower level of fertilization also decreases gerbera quality, highlighting that Ca, Mg, Mn, and Fe could be reduced with respect to standard fertilization.

The role of emissions and meteorology in driving CO2 concentrations in urban areas.

A multi-year dataset of measurements of CO2 concentrations, eddy covariance fluxes, and meteorological parameters over the city centre of Florence (Italy) has been analysed to assess the role of anthropogenic emissions and meteorology in controlling urban CO2 concentrations. The latter exhibited a negative correlation with air temperature, wind speed, solar radiation, and sensible heat flux and a positive one with relative humidity and emissions. A linear and an artificial neural network (ANN) model have been developed and validated for short-term modelling of 3-h CO2 concentrations. The ANN model performed better, with mean bias of 0.58 ppm, root mean square error within 30 ppm, and r2=0.49. Data clustering through the self-organized maps allowed to disentangle the role played by emissions and meteorological parameters in influencing CO2 concentrations. Sensitivity analysis of CO2 concentrations revealed a primary role played by the meteorological parameters, particularly wind speed. These results highlighted that (i) emission reduction actions at local urban scale should be better tied to actual and expected meteorological conditions and (ii) those actions alone have limited effects (e.g. a 20% emission reduction would result in a 3% CO2 concentrations reduction). For all these reasons, large-scale policies would be needed.

Composition and emission of VOC from biogas produced by illegally managed waste landfills in Giugliano (Campania, Italy) and potential impact on the local population.

The composition in Volatile Organic Compounds (VOC) of the biogas produced by seven landfills of Giugliano (Naples, Campania, Italy) was determined and VOC emission rates assessed to verify if these compounds represent a potential threat to the population living nearby. VOC composition in the biogas could not be predicted, as heterogeneous waste was dumped from the late 1980s to the early 2000s and then underwent biological degradation. No data are available on the amount and composition of VOC in the biogas before the landfills closure as no operational biogas collection system was present. In this study, VOC composition was determined by gas chromatography-mass spectrometry (GC-MS), after collecting samples from collection pipes and from soil fractures in cover soil or capping. Individual VOC were quantified and data compared with those collected at two landfills in Latium, when they were still in operation. Relevant differences were observed, mainly due to waste aging, but no specific VOC revealing toxic waste dumping was found, although the concurrent presence of certain compounds suggested that dumping of industrial wastes might have occurred. The average VOC emission was assessed and a dispersion model was run to find out if the emitted plume could affect the health of population. The results suggested that fugitive emissions did not represent a serious danger, since the concentrations simulated at the neighboring cities were below the threshold limits for acute and chronic diseases. However, VOC plume could cause annoyance at night when the steady state conditions of the atmosphere enhance pollutants accumulation in the lower layers. In addition, some of the emitted VOC, such as alkylbenzenes and monoterpenes, can contribute to tropospheric ozone formation.

Influence of road traffic, residential heating and meteorological conditions on PM10 concentrations during air pollution critical episodes.

The importance of road traffic, residential heating and meteorological conditions as major drivers of urban PM10 concentrations during air pollution critical episodes has been assessed in the city of Florence (Italy) during the winter season. The most significant meteorological variables (wind speed and atmospheric stability) explained 80.5-85.5% of PM10 concentrations variance, while a marginal role was played by major emission sources such as residential heating (12.1%) and road traffic (5.7%). The persistence of low wind speeds and unstable atmospheric conditions was the leading factor controlling PM10 during critical episodes. A specific PM10 critical episode was analysed, following a snowstorm that caused a "natural" scenario of 2-day dramatic road traffic abatement (-43%), and a massive (up to +48%) and persistent (8 consecutive days) increase in residential heating use. Even with such a strong variability in local PM10 emissions, the role of meteorological conditions was prominent, revealing that short-term traffic restrictions are insufficient countermeasures to reduce the health impacts and risks of PM10 critical episodes, while efforts should be made to anticipate those measures by linking them with air quality and weather forecasts.

[Policies for the promotion of sustainable mobility and the reduction of traffic-related air pollution in the cities participating in the EpiAir2 project]. / Le politiche per la promozione della mobilità sostenibile e la riduzione dell'inquinamento atmosferico causato dal traffico veicolare nelle città partecipanti allo studio EpiAir2.

OBJECTIVE: to describe transport policies adopted in recent years (2006-2010) by some Italian municipalities and their effectiveness. DESIGN AND SETTING: survey data refer to fifteen cities participating in the EpiAir2 project: Torino, Milano, Venezia, Bologna, Firenze, Pisa, Roma, Taranto, Palermo, Cagliari, Trieste, Genova, Ancona, Napoli, and Bari. RESULTS: this survey revealed strengths and weaknesses of the way in which these Italian cities address the promotion of sustainable mobility. As a general rule, the vehicle fleets have been renewed with a reduction of old-emission-standard vehicles. Italian cities reported a considerable delay in the development of underground and tram systems, and suburban rail networks, compared to other European urban areas. Regarding other aspects of urban mobility (supply/demand for public transport, low traffic and pedestrian zones, bike paths, car and bike sharing), this survey highlighted a great heterogeneity among Italian cities. CONCLUSION: differences between Italian cities are partly explained by structural and cultural features and also by local governance, specifically the political capability to design and adopt effective policies concerning urban transportation systems and their environmental impact. Various and fragmented initiatives are signs that Italy has not formulated a comprehensive and integrated strategy about sustainable mobility in urban areas yet.

Exploring the metal phytoremediation potential of three Populus alba L. clones using an in vitro screening.

PURPOSE: This work was planned for providing a useful screening tool for the selection of Populus alba clones suitable for phytoremediation techniques. To this aim, we investigated variation in arsenic, cadmium, copper, and zinc tolerance, accumulation and translocation in three poplar clones through an in vitro screening. Poplars have been widely proposed for phytoremediation, as they are adaptable to grow on contaminated areas and able to accumulate metals. The investigation of possible differences among poplar clones in metal tolerance and accumulation deserves to be deeply studied and exploited for the selection of the more suitable tool for phytoremediation purposes. METHODS: In vitro multiplied microshoots of a commercial and two autochthonous P. alba clones were subcultured on hormone-free WPM medium for 1 month and then transferred for 2 weeks onto media containing different concentrations of the metals investigated. At the end of the treatments, plantlets were sampled, weighed, and mineralised by wet ashing. Metal concentrations were determined by ICP-OES. RESULTS: For the metal concentration used in the experiments, our clones of P. alba showed variation in metal tolerance, metal accumulation and content. The fast-growing commercial clone, even if rarely showing the highest plant metal concentration, displayed the highest metal content, suggesting biomass production as the key factor in evaluating the phytoextraction capacity of P. alba clones for the metals studied. CONCLUSIONS: Data demonstrated that in vitro screening of cuttings represents a valuable way of assessing the ability of different poplar clones to take up, tolerate and survive metal stress.