Computer-aided design and computer-aided manufacturer indirect versus direct composite restorations: A randomized clinical trial.

OBJECTIVE: This study compared the clinical performance of large indirect restorations (IRs) versus direct restorations (DRs) in posterior teeth. METHODS: Thirty subjects received two class II restorations (n = 60), one fabricated from a precured composite block (Grandio Blocs, VOCO) for the indirect technique (IT) and the other with light-cured composite (GrandioSO, VOCO) for the direct technique (DT). For IT, the restoration was created using the computer-aided design and computer-aided manufacturer (CAD/CAM) system. For DT, the material was applied light-cured by using a layering technique. All restorations were evaluated by using the World Dental Federation criteria. RESULTS: Twenty-three subjects attended the 2-year recall, and 46 restorations were evaluated. No significant differences were detected between the techniques for most parameters analyzed (p > 0.05). For "color match" at 7 days and 6 months, better results were observed for the DT. In relation to the overall scores, all restorations were esthetically acceptable after 2 years, while 93.3% of DT and 90% of IT showed acceptable function. For biological scores, 96.67% of DRs and 100% of IRs was acceptable after 24 months. Considering all properties, the success rates were 93.3% for DRs and 90% for IRs. CONCLUSIONS: After 2 years, both restorations presented similar and good clinical behavior for all the properties analyzed. CLINICAL SIGNIFICANCE: Light-cured direct posterior composite restorations may perform similarly to indirect composite restorations made with precured CAD/CAM composite blocks up to 2 years.

Bulk-fill versus layering pure ormocer posterior restorations: A randomized split-mouth clinical trial.

PURPOSE: To evaluate the clinical performance of Class II restorations made with bulk-fill or layering pure ormocer materials, as well as the time necessary to fill the preparations. METHODS: After ethics approval, a randomized controlled split-mouth clinical trial was performed. 30 subjects were selected according to the inclusion/exclusion criteria, and two restorations were randomly performed in each first or second molar that presented caries, fracture, or cosmetic needs. One restoration was done with the bulk-fill material Admira Fusion x-tra, applied with increments up to 4 mm (intervention group), while the second was performed with the regular Admira Fusion, applied by a 2 mm layering technique (control group). The universal adhesive system Futurabond U was used for both groups. The subjects and examiners were blinded, and the examiners were previously calibrated. The restorations were evaluated according to FDI criteria, after 7 days, 6, 12 and 24 months, and the outcome was success rate based on esthetic, functional and biological properties. The time necessary for application of both materials into the preparations was also measured. RESULTS: After 24 months, 26 patients attended the recall and 52 restorations were evaluated. The Fisher's statistical analysis (α= 5%) showed non-significant differences between techniques for esthetic, biological and functional properties in all evaluations (P> 0.05). After 2 years, 96% of the subjects for both groups did not show any sign of post-operative sensitivity and 100% of the teeth were vital and without secondary caries. Around 70% of the restorations received score excellent for surface luster, more than 83% for surface staining and 63% for color match. In relation to marginal adaptation and marginal staining, more than 80% for the layering material and 63% for the bulk showed excellent scores. Only three restorations of the 60 performed showed small fractures, although not affecting the esthetics or function. The time for composite application was significantly shorter for the bulk material (P= 0.0454). After 24 months of intraoral service, the restorations made with both materials presented similar and excellent clinical performance for all parameters analyzed. The bulk-fill material required significantly less chair time to apply than the layering one, simplifying and accelerating the restorative technique. CLINICAL SIGNIFICANCE: The bulk-fill ormocer-based composite was an appropriate alternative to the conventional layering material, since similar clinical performance was observed after 2 years, with the advantage of shorter chair time, due to simplified operative procedures.

The influence of a liner on deep bulk-fill restorations: Randomized clinical trial.

OBJECTIVE: The aim of this study was to evaluate the influence of a liner on the clinical performance of deep posterior restorations performed with bulk-fill composite. METHODS: 30 subjects received two restorations on deep preparations in posterior teeth, without pulpal exposure, after selective carious-tissue removal in one-stage. The internal walls reached the inner quarter of dentin, but with a radiographically detectable zone of firm dentin remaining. The pulpal protection using a layer of glass ionomer composite liner (Ionoseal, Voco) was applied in just one preparation. The adhesive system Futurabond U (Voco) was applied in all preparations, which were restored with the bulk-fill pure Ormocer nanohybrid composite (Admira Fusion Xtra - Voco), in up to 4 mm thick increments. All restorations were evaluated using the FDI criteria after 7 days, 6, 12 and 24 months postoperatively. RESULTS: After 24-months, 25 patients attended the recall and 50 restorations were evaluated. The Fisher's statistical analysis (5%) showed no difference between the techniques for the esthetic, functional and biological properties. No postoperative sensitivity was reported for both groups. CONCLUSION: The application of a liner did not influence the clinical performance of deep restorations with bulk-fill Ormocer composite. CLINICAL RELEVANCE: The application of a liner with a GIC-based material did not have a significant effect on the clinical performance of bulk-fill restorations and seems to be unnecessary for the material tested.

A randomized clinical trial of class II composite restorations using direct and semidirect techniques.

OBJECTIVE: This prospective study evaluated the clinical performance of large class II restorations made with different techniques over 24 months. MATERIALS AND METHODS: Thirty patients received two class II restorations (n = 60) using a nanohybrid composite and different restorative techniques (direct (DT), semidirect (SDT)), in a split-mouth randomized design. The same adhesive system was applied for all restorations. For DT, the restorative material was applied directly inside the tooth preparation. For SDT, a tooth preparation impression was obtained using alginate and a silicone flexible die was prepared. The restoration was made chairside on the model and additionally light cured. After that, it was cemented in preparation using resinous cement. All restorations were evaluated using the FDI criteria after 7 days, 6, 12, and 24 months postoperatively. RESULTS: After 24 months, 24 patients attended the recall and 48 restorations were evaluated. Fisher's statistical analysis (5%) showed no difference between the techniques. Nevertheless, Friedman's test showed significant differences for some criteria after 12 months of evaluation for both techniques. Postoperative sensitivity was reported in one DT restoration. Also, after 24 months, one SDT restoration presented marginal fracture, which was deemed unsatisfactory. CONCLUSIONS: After a 24-month follow-up, no significant difference between the tested techniques was detected. The restorations performed with both techniques produced clinically acceptable restorations. CLINICAL RELEVANCE: This study demonstrated the viability of applying two different operatory techniques (direct and semidirect) for class II resin composite restorations.

Effect of the restorative technique on load-bearing capacity, cusp deflection, and stress distribution of endodontically-treated premolars with MOD restoration.

OBJECTIVES: To evaluate the influence of the restorative technique on the mechanical response of endodontically-treated upper premolars with mesio-occluso-distal (MOD) cavity. MATERIALS AND METHODS: Forty-eight premolars received MOD preparation (4 groups, n = 12) with different restorative techniques: glass ionomer cement + composite resin (the GIC group), a metallic post + composite resin (the MP group), a fiberglass post + composite resin (the FGP group), or no endodontic treatment + restoration with composite resin (the CR group). Cusp strain and load-bearing capacity were evaluated. One-way analysis of variance and the Tukey test were used with α = 5%. Finite element analysis (FEA) was used to calculate displacement and tensile stress for the teeth and restorations. RESULTS: MP showed the highest cusp (p = 0.027) deflection (24.28 ± 5.09 µm/µm), followed by FGP (20.61 ± 5.05 µm/µm), CR (17.72 ± 6.32 µm/µm), and GIC (17.62 ± 7.00 µm/µm). For load-bearing, CR (38.89 ± 3.24 N) showed the highest, followed by GIC (37.51 ± 6.69 N), FGP (29.80 ± 10.03 N), and MP (18.41 ± 4.15 N) (p = 0.001) value. FEA showed similar behavior in the restorations in all groups, while MP showed the highest stress concentration in the tooth and post. CONCLUSIONS: There is no mechanical advantage in using intraradicular posts for endodontically-treated premolars requiring MOD restoration. Filling the pulp chamber with GIC and restoring the tooth with only CR showed the most promising results for cusp deflection, failure load, and stress distribution.

Influence of ethanol-wet dentin, adhesive mode of application, and aging on bond strength of universal adhesive.

The aim of this study was to evaluate the effect of ethanol on the bond longevity of a universal adhesive system to bovine dentin, under different modes of adhesive application and artificial aging. Bovine dentin was exposed, and the smear layer was standardized by sandpaper polishing. Specimens were randomly divided into 2 groups: ethanol (E) and non-ethanol (N). Groups were subdivided according to adhesive mode of application into etch-and-rinse (Er) and self-etching (S). Resin blocks were built onto the treated surface, and the specimens were stored in deionized water at 37°C for 48 h. Half of the specimens (n = 10) were subjected to thermomechanical aging (A for aged and Na for non-aged). Resin/dentin beams were obtained and subjected to microtensile test in a universal testing machine. Data were analyzed using a three-way ANOVA and Tukey's tests (α = 5%). There was interaction among the three factors (p=0.0003). The use of ethanol resulted in higher values, except for the Er and Na groups (E_Er_Na = N_Er_Na). The mode of application was similar, except for the N and A groups (N_S_A > N_Er_A). For the A groups, the values were lower, except in the cases using ethanol, in which the results were not affected. The study concluded that the use of ethanol resulted in higher microtensile bond strength values, even after aging. The mode of adhesive application did not influence the results.

Influence of ethanol-wet dentin, adhesive mode of application, and aging on bond strength of universal adhesive

Abstract The aim of this study was to evaluate the effect of ethanol on the bond longevity of a universal adhesive system to bovine dentin, under different modes of adhesive application and artificial aging. Bovine dentin was exposed, and the smear layer was standardized by sandpaper polishing. Specimens were randomly divided into 2 groups: ethanol (E) and non-ethanol (N). Groups were subdivided according to adhesive mode of application into etch-and-rinse (Er) and self-etching (S). Resin blocks were built onto the treated surface, and the specimens were stored in deionized water at 37°C for 48 h. Half of the specimens (n = 10) were subjected to thermomechanical aging (A for aged and Na for non-aged). Resin/dentin beams were obtained and subjected to microtensile test in a universal testing machine. Data were analyzed using a three-way ANOVA and Tukey's tests (α = 5%). There was interaction among the three factors (p=0.0003). The use of ethanol resulted in higher values, except for the Er and Na groups (E_Er_Na = N_Er_Na). The mode of application was similar, except for the N and A groups (N_S_A > N_Er_A). For the A groups, the values were lower, except in the cases using ethanol, in which the results were not affected. The study concluded that the use of ethanol resulted in higher microtensile bond strength values, even after aging. The mode of adhesive application did not influence the results.

Effect of green tea extract and mouthwash without alcohol on Candida albicans biofilm on acrylic resin.

OBJECTIVE: To evaluate the effect of aqueous extract of green tea and the oral antiseptic without alcohol, on Candida albicans biofilm formation to heat-curing acrylic resin plates. BACKGROUND: Candida is associated with oral candidiasis in poorly cleaned dentures. MATERIAL AND METHODS: Standardised specimens of heat-cured (Conv; n = 30) or microwave-cured acrylic resin (Mw; n = 30) were obtained and divided into six groups (n = 10): G1 = Conv resin and green tea aqueous extract, G2 = Conv resin and mouthwash, G3 = control of Conv resin, G4 = Mw resin and green tea aqueous extract, G5 = Mw resin and mouthwash and G6 = control of Mw-cured resin. The specimens were contaminated with 10 ml of Sabouraud dextrose broth inoculated with 0.1 ml of standard suspension containing 1 × 10(6) cells/ml of C. albicans and incubated for 24 h at 37°C. After this period, they were immersed in the aqueous extract or in mouthwash for 15 min. The control groups were treated with sterile distilled water. Aliquots of 0.1 ml were plated on Sabouraud dextrose agar and incubated at 37°C for 24 h. The numbers of colony-forming units per test specimen (CFU/TS) were calculated, and the results statistically analysed by two-way anova and Tukey's tests (5%). RESULTS: Statistically significant difference was observed for the aqueous extract groups (G1; 33.65%) and mouthwash (G2; 17.06%), when compared to control (G3; 100%), for Conv resin. For the Mw resin, there was significant difference between mouthwash (G5; 43.16%) and control (G6; 100%). CONCLUSION: The aqueous extract of green tea and mouthwash led to a reduction in the number of viable fungal cells in biofilm formed on acrylic resin.

Effects of thermomechanical and thermocycling on the shear bond strength of brackets to bovine enamel bonded with conventional and self-etching adhesive systems / Efeito da ciclagem térmica e térmico-mecânica na resistência adesiva ao cisalhamento de bráquetes aderidos ao esmalte bovino com sistema adesivo convencional e auto-condicionante

Muitos sistemas adesivos foram desenvolvidos na última década. O objetivo desse estudo foi avaliara resistência adesiva ao cisalhamaneto (RAC)de bráquetes ortodônticos aderidos com primer convencional (PC) ou primer auto-condicionante (PAC), submetidos à ciclagem térmica (CT) e ciclagem térmico-mecânica (CTM). Incisivos bovinos (n =90)foram randomicamente divididos em 2 grupos (n =45) para a colagem dos bráquetes: XT (Transbond XT, 3M-Unitek, CA, USA); SEP (Transbond Plus SEP,3M-Unitek, CA, USA). Após o procedimento adesivo os grupos forma subdivididos em 3 sub-grupos: SC(sem ciclagem) – 1 e 4 (n =15 cada); CTM (ciclagem térmico-mecânica)- 2 e 5 (n = 15 cada); CT (ciclagem térmica)- 3 e 6 (n = 15 cada). Um simulador de fadiga térmica foi usado para os subgrupos 3 e 6, que fioram submetidos a 500 ciclos térmicos entre 5 and 55 C (ISO 11405). Os subgrupos 2 e 5 foram submetidos à ciclagem térmico-mecânica em um simulador de fadiga. Os espécimes foram colocados em uma basede metal num ângulo de 45 e os braquetes receberam impulsos de 1 bar e 4 Hz de frequência, por uma agulha de metal de 2.5 mm de diâmetro fixada na haste superior do equipamento. Foram submetidos a 100.000 ciclos mecânicos e 500 ciclos térmicos entre 5 and 55 C. O teste de RAC foi realizado emuma máquina universal de testes (1mm/min). Após orompimento da união foi realizada uma avaliação emmicroscopia óptica para avaliar a penetração adesivae o Índice de Permanência do Adesivo (IPA) sobreo esmalte. Os resultados mostraram maiores valores de RAC (14,70 ± 4,85 MPa) para o SEP. A CT não influenciou os resultados para o XT (NC- 11,44 MPa;TC - 11,20 MPa; TMC - 11,19 MPa), enquanto para oSEP, a CTM mostrou maiores valores (16,84 MPa)...

Several adhesive systems have been developed in the last decade. The aim of the current studywas to evaluate the shear bond strength (SBS) of orthodontic brackets bonded with conventional primers (XT) or self-etching primers (SEP), by means of thermocycling (TC) and thermomechanical(TM) procedures. 90 bovine incisors were randomly divided into 2 groups (45 specimens each) for brackets bonding: XT (Transbond XT, 3M-Unitek,CA, USA); SEP (Transbond Plus SEP, 3M-Unitek,CA, USA). After bonding, groups were divided into 3subgroups: NC (no cycling)- 1 and 4 (n = 15 each),TMC – 2 and 5 (n =15 each); and TC- 3 and 6 (n=15 each). The fatigue simulator was used for thethermal fatigue test of groups 3 and 6, which were submitted to thermal variation cycles - 500 cyles were carried out in between 5 and 55 C ( ISO 11405). Groups 2 and 5 were submitted to thermomechanicaltests by using the mechanical fatigue simulator. Thespecimens were placed at a metal base at an angleof 45, in a way that the 2.5 mm diameter metalneedle was fixed in the upper part of the cyclingmachine and could induce impulses of 1 bar loadintensity and 4 Hz frequency (4 cycles per second)on the bracket. The samples were submitted to 100000 mechanical cycles and 500 thermal cycles which varied from 5C to 55C. The SBS test was performed in a universal testing machine (1 mm/min). Afterdebonding, optic microscopic evaluation for adhesive penetration and Adhesive Remaining Index (ARI)analyses in the enamel surface were performed.The results showed higher SBS (14.70 ± 4.85 MPa)values for SEP. The SBS remained similar despitecycling (NC-11.44 MPa; TC-11.20 MPa; TMC-11.19MPa) for XT, meanwhile for SEP, ...

A split-mouth randomized clinical trial of conventional and heavy flowable composites in class II restorations.

OBJECTIVE: The aim of this study was to evaluate the 2-year clinical performance of class II restorations made with a composite resin with two different viscosities. METHODS: 47 patients received two class II restorations (n=94), one made with GrandioSO (conventional viscosity - CV), and the other with GrandioSO Heavy Flow (flowable viscosity - FV), subjecting both materials to the same clinical conditions. The self-etching adhesive Futurabond M was used for all restorations. The composites were inserted using the incremental technique. The restorations were evaluated using the modified USPHS criteria according to the periods: baseline, 6 months, 1 year and 2 years after restorative procedures. RESULTS: After 24 months, 40 patients attended the recall and 78 restorations were evaluated. In all periods, no secondary caries was observed. After 6 months, there were slightly overall changes of scores for most parameters. After 24 months, the higher number of changes from score Alfa to Bravo was observed for marginal discolouration (32.5% - CV and 39.5% - FV) and colour match (15% - CV and 31.6% - FV), followed by proximal contact (25% - CV and 23.7% - FV) and marginal adaptation (20% - CV and 21.1% - FV). For wear, surface texture and postoperative sensitivity the changes were very small. Just two restorations were lost during the 24-month follow up. Less than 5% of all restorations showed postoperative sensitivity. Chi-square test showed no significant differences between the two materials for all parameters analysed. CONCLUSION: After 2 years of clinical service, no significant differences were observed between GrandioSO conventional and GrandioSO Heavy Flow for the parameters analysed. Both materials provided acceptable clinical behaviour in class II restorations. CLINICAL SIGNIFICANCE: This study presents the possibility of using a flowable composite with high filler content, for performing class II restorations.

Influence of CVD diamond tips and Er:YAG laser irradiation on bonding of different adhesive systems to dentin.

AIM: The aim of this study was to compare the microtensile bond strength of three adhesive systems, using different methods of dentin preparation. MATERIALS AND METHODS: A hundred and eight bovine teeth were used. The dentin from buccal face was exposed and prepared with three different methods, divided in 3 groups: Group 1 (DT)- diamond tip on a high-speed handpiece; Group 2 (CVD)-CVD tip on a ultrasonic handpiece; Group 3 (LA)-Er: YAG laser. The teeth were divided into 3 subgroups, according adhesive systems used: Subgroup 1-Adper Single Bond Plus/3M ESPE (SB) total-etch adhesive; Subgroup 2-Adper Scotchbond SE/3M ESPE (AS) selfetching adhesive; Subgroup 3-Clearfil SE Bond/Kuraray (CS) selfetching adhesive. Blocks of composite (Filtek Z250-3M ESPE) 4 mm high were built up and specimens were stored in deionized water for 24 hours at 37°C. Serial mesiodistal and buccolingual cuts were made and stick-like specimens were obtained, with transversal section of 1.0 mm(2). The samples were submitted to microtensile test at 1 mm/min and load of 10 kg in a universal testing machine. Data (MPa) were subjected to ANOVA and Tukey's tests (p < 0.05). RESULTS AND CONCLUSION: Surface treatment with Diamond or CVD tips associated with Clearfil SE Bond adhesive produced significantly lower bond strength values compared to other groups. Surface treatment with Er: YAG laser associated with Single Bond Plus or Clearfil SE Bond adhesives and surface treatment with CVD tip associated with Adper Scotchbond SE adhesive produced significantly lower bond strength values compared to surface treatment with diamond or CVD tips associated with Single Bond Plus or Adper Scotchbond SE adhesives. CLINICAL SIGNIFICANCE: Interactions between laser and the CVD tip technologies and the different adhesive systems can produce a satisfactory bonding strength result, so that these associations may be beneficial and enhance the clinical outcomes.

Cuspal deflection of directly or indirectly restored teeth / Deflexão cuspídea de dentes restaurados direta ou indiretamente

Objective: The aim of this study was to evaluate the cuspal deflection of teeth restored directly and indirectly. Material and Methods: Forty sound maxillary premolar teeth were restored with composite and different base materials. Wide mesial-occlusal-distal cavity preparations were performed, with isthmus width of one third of the distance between the cuspal tips, 3 mm occlusal and a 5 mm interproximal preparation height. The teeth were divided into 4 groups (n = 10), according to the restoration type: G1) GIC-DCR (1 mm glass ionomer cement base and direct restoration using nanoparticulate composite); G2) FL-DCR (1 mm base of flowable composite resin and direct restoration using nanoparticulate composite); G3) GIC-ICR (1 mm glass ionomer cement base and indirect restoration using nanoparticulate composite GIC base); G4) FL-ICR (1 mm base of flowable composite resin and indirect restoration using nanoparticulate composite). The specimens were submitted to compressive load of 50 N on the buccal and lingual cusps, in a universal testing machine. The lingual cusp microstrain (με) measurements were executed by strain gauges. Results: The Kruskal-Wallis (5%) test was used and showed there were no significant differences among the microstrain values for the four study groups (G1 = 1250; G2 = 1075; G3 = 1279; G4 = 937). Conclusion: It could be concluded that the restorative techniques and the bases employed did not show any influences in cuspal deflection

Objetivo: O objetivo deste trabalho foi avaliar, por meio de medidores de tensão, a deflexão cuspídea sofrida por dentes restaurados, direta e indiretamente, com resinas compostas e diferentes materiais de base. Material e Métodos: Para o preparo dos corpos-de-prova (CP) foram utilizados 28 dentes pré-molares humanos íntegros, extraídos por razões ortodônticas que tiveram suas raízes embutidas em poliuretano de densidade semelhante a do osso e suas raízes recobertas por um espaçador visando simular o espaço referente ao ligamento periodontal. Na etapa seguinte os dentes receberam preparos cavitários do tipo mésio-ocluso-distais amplos e então restaurados direta e indiretamente com resina composta e dois diferentes materiais de base/forramento, resina flow e cimento de ionômero de vidro. Para a realização das medidas de deflexão das cúspides foram utilizados extensômetros lineares elétricos colados à face lingual de cada dente e submetidos a uma carga de 50 N aplicada por uma ponta romba de diâmetro de 3,0 mm, que promoveu compressão simultânea nas vertentes triturantes das cúspides vestibular e lingual, numa máquina universal de ensaios. Resultados: Foi realizado o teste de Kruskall-Wallis (5%) de significância e não foram encontradas diferenças estatísticamente significantes entre os grupos (G1 – 1250; G2 = 1075; G3 = 1279; G4 = 937). Conclusão: Pode-se concluir que o tipo de restauração bem como o tipo de base empregados nesse estudo não alteram a deflexão cuspídea dos dentes com restaurações amplas.

In Vitro assessment of dentin erosion after immersion in acidic beverages: surface profile analysis and energy-dispersive X-ray fluorescence spectrometry study.

The aim of this study was to investigate the effects of some acidic drinks on dentin erosion, using methods of surface profile (SP) analysis and energy-dispersive X-ray fluorescence spectrometry (EDXRF). One hundred standardized dentin slabs obtained from bovine incisor roots were used. Dentin slabs measuring 5x5 mm were ground flat, polished and half of each specimen surface was protected with nail polish. For 60 min, the dentin surfaces were immersed in 50 mL of 5 different drinks (Gatorade®, Del Valle Mais orange juice®, Coca-Cola®, Red Bull® and white wine), 20 blocks in each drink. The pH of each beverage was measured. After the erosive challenge, the nail polish was removed and SP was analyzed. The mineral concentration of dentin surfaces was determined by means of EDXRF. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). SP analysis showed that Red-Bull had the highest erosive potential (p<0.05). EDXRF results exhibited a decrease in phosphate in the groups immersed in Red-Bull, orange juice and white wine (p<0.05), and no significant difference in calcium content between the reference surface and eroded surface. In conclusion, this study demonstrated that all studied beverages promoted erosion on root dentin and Red Bull had the highest erosive potential. There was no correlation between pH of beverages and their erosive potential and only the P content changed after erosive challenge.

In Vitro assessment of dentin erosion after immersion in acidic beverages: surface profile analysis and energy-dispersive X-ray fluorescence spectrometry study

The aim of this study was to investigate the effects of some acidic drinks on dentin erosion, using methods of surface profile (SP) analysis and energy-dispersive X-ray fluorescence spectrometry (EDXRF). One hundred standardized dentin slabs obtained from bovine incisor roots were used. Dentin slabs measuring 5x5 mm were ground flat, polished and half of each specimen surface was protected with nail polish. For 60 min, the dentin surfaces were immersed in 50 mL of 5 different drinks (Gatorade®, Del Valle Mais orange juice®, Coca-Cola®, Red Bull® and white wine), 20 blocks in each drink. The pH of each beverage was measured. After the erosive challenge, the nail polish was removed and SP was analyzed. The mineral concentration of dentin surfaces was determined by means of EDXRF. Data were analyzed statistically by ANOVA and Tukey's test (α=0.05). SP analysis showed that Red-Bull had the highest erosive potential (p<0.05). EDXRF results exhibited a decrease in phosphate in the groups immersed in Red-Bull, orange juice and white wine (p<0.05), and no significant difference in calcium content between the reference surface and eroded surface. In conclusion, this study demonstrated that all studied beverages promoted erosion on root dentin and Red Bull had the highest erosive potential. There was no correlation between pH of beverages and their erosive potential and only the P content changed after erosive challenge.

O objetivo deste estudo foi investigar os efeitos de algumas bebidas ácidas sobre a erosão da dentina, utilizando métodos de análise de perfil de superfície (SP) e espectrometria de energia dispersiva de fluorescência de raios X (EDXRF). Cem blocos de dentina padronizados obtidos de raízes de incisivos bovinos foram utilizados. Os blocos de dentina medindo 5x5 mm foram planificados, polidos e metade de cada superfície das amostras foram impermeabilizados com esmalte para unhas. Por 60 min, as superfícies de dentina foram imersas em 50 mL de 5 bebidas diferentes (Gatorade, suco de laranja, Coca-Cola, Red Bull e vinho branco), 20 blocos em cada bebida. O pH de cada bebida foi medido. Após o desafio erosivo, o esmalte de unha foi removido e SP foram analisados. A concentração de minerais das superfícies de dentina foi determinada por meio de EDXRF. Os dados foram analisados estatisticamente por ANOVA e teste de Tukey. (p<0,05). A análise SP mostrou que o Red-Bull apresentou o maior potencial erosivo. Os resultados do EDXRF apresentaram uma diminuição do fosfato dos grupos imersos no Red-Bull, suco de laranja e vinho branco, e não houve diferença significativa no teor de cálcio entre a superfície de referência e a superfície que sofreu erosão. O Red Bull apresentou o maior potencial erosivo sobre a dentina radicular. Não houve correlação entre o pH das bebidas e o seu potencial erosivo.

Retention mucocele on the lower lip associated with inadequate use of pacifier.

Mucocele forms because of salivary gland mucous extravasation or retention and is usually related to trauma in the area of the lower lips. Ruptured ducts release the mucous that accumulates into adjacent tissues, leading to swelling. This report describes a large mucocele involving the lower lip, which was produced in a child by incorrect use of a pacifier. A few important concepts are discussed to help clinicians in the diagnosis and treatment of this pathology.

Shear bond strength of orthodontic brackets bonded using halogen light and light-emitting diode at different debond times.

The aim of this in vitro study was to compare the photoactivation effects of QTH (Quartz-Tungsten-Halogen) and LED (Light-Emitting Diode) on the SBS (Shear Bond Strength) of orthodontic brackets at different debond times. Seventy-two bovine lower incisors were randomly divided into two groups according to the photoactivation system used (QTH or LED). The enamel surfaces were conditioned with Transbond self-etching primer, and APC (Adhesive Pre-Coated) brackets were used in all specimens. Group I was cured with QTH for 20 s and Group II with LED for 10 s. Both groups were subdivided according to the different experimental times after bonding (immediately, 24 h and 7 days). The specimens were tested for SBS and the enamel surfaces were analyzed according to the Adhesive Remnant Index (ARI). The statistical analysis included the Tukey's test to evaluate the main effects of photoactivation and debond time on SBS. The Chi-square test was used to compare the ARI values found for each group, and no statistically significant difference was observed. The debond time of 7 days for QTH photoactivation showed statistically greater values of SBS when compared to the immediate and 24 h periods. There was no statistically significant difference between the QTH and LED groups immediately and after the 24 h period. In conclusion, bonding orthodontic brackets with LED photoactivation for 10 s is suggested because it requires a reduced clinical chair time.

Shear bond strength of orthodontic brackets bonded using halogen light and light-emitting diode at different debond times

The aim of this in vitro study was to compare the photoactivation effects of QTH (Quartz-Tungsten-Halogen) and LED (Light-Emitting Diode) on the SBS (Shear Bond Strength) of orthodontic brackets at different debond times. Seventy-two bovine lower incisors were randomly divided into two groups according to the photoactivation system used (QTH or LED). The enamel surfaces were conditioned with Transbond self-etching primer, and APC (Adhesive Pre-Coated) brackets were used in all specimens. Group I was cured with QTH for 20 s and Group II with LED for 10 s. Both groups were subdivided according to the different experimental times after bonding (immediately, 24 h and 7 days). The specimens were tested for SBS and the enamel surfaces were analyzed according to the Adhesive Remnant Index (ARI). The statistical analysis included the Tukey's test to evaluate the main effects of photoactivation and debond time on SBS. The Chi-square test was used to compare the ARI values found for each group, and no statistically significant difference was observed. The debond time of 7 days for QTH photoactivation showed statistically greater values of SBS when compared to the immediate and 24 h periods. There was no statistically significant difference between the QTH and LED groups immediately and after the 24 h period. In conclusion, bonding orthodontic brackets with LED photoactivation for 10 s is suggested because it requires a reduced clinical chair time.

Microhardness of glass ionomer cements indicated for the ART technique according to surface protection treatment and storage time.

The aim of this study was to assess the microhardness of 5 glass ionomer cements (GIC) - Vidrion R (V, SS White), Fuji IX (F, GC Corp.), Magic Glass ART (MG, Vigodent), Maxxion R (MR, FGM) and ChemFlex (CF, Dentsply) - in the presence or absence of a surface protection treatment, and after different storage periods. For each GIC, 36 test specimens were made, divided into 3 groups according to the surface protection treatment applied - no protection, varnish or nail varnish. The specimens were stored in distilled water for 24 h, 7 and 30 days and the microhardness tests were performed at these times. The data obtained were submitted to the ANOVA for repeated measures and Tukey tests (alpha = 5%). The results revealed that the mean microhardness values of the GICs were, in decreasing order, as follows: F > CF = MR > MG > V; that surface protection was significant for MR, at 24 h, without protection (64.2 + or - 3.6a), protected with GIC varnish (59.6 + or - 3.4b) and protected with nail varnish (62.7 + or - 2.8ab); for F, at 7 days, without protection (97.8 + or - 3.7ab), protected with varnish (95.9 + or - 3.2b) and protected with nail varnish (100.8 + or - 3.4a); and at 30 days, for F, without protection (98.8 + or - 2.6b), protected with varnish (103.3 + or - 4.4a) and protected with nail varnish (101 + or - 4.1ab) and, for V, without protection (46 + or - 1.3b), protected with varnish (49.6 + or - 1.7ab) and protected with nail varnish (51.1 + or - 2.6a). The increase in storage time produced an increase in microhardness. It was concluded that the different GICs, surface protection treatments and storage times could alter the microhardness values.

Microhardness of glass ionomer cements indicated for the ART technique according to surface protection treatment and storage time

The aim of this study was to assess the microhardness of 5 glass ionomer cements (GIC) - Vidrion R (V, SS White), Fuji IX (F, GC Corp.), Magic Glass ART (MG, Vigodent), Maxxion R (MR, FGM) and ChemFlex (CF, Dentsply) - in the presence or absence of a surface protection treatment, and after different storage periods. For each GIC, 36 test specimens were made, divided into 3 groups according to the surface protection treatment applied - no protection, varnish or nail varnish. The specimens were stored in distilled water for 24 h, 7 and 30 days and the microhardness tests were performed at these times. The data obtained were submitted to the ANOVA for repeated measures and Tukey tests (á = 5 percent). The results revealed that the mean microhardness values of the GICs were, in decreasing order, as follows: F > CF = MR > MG > V; that surface protection was significant for MR, at 24 h, without protection (64.2 ± 3.6a), protected with GIC varnish (59.6 ± 3.4b) and protected with nail varnish (62.7 ± 2.8ab); for F, at 7 days, without protection (97.8 ± 3.7ab), protected with varnish (95.9 ± 3.2b) and protected with nail varnish (100.8 ± 3.4a); and at 30 days, for F, without protection (98.8 ± 2.6b), protected with varnish (103.3 ± 4.4a) and protected with nail varnish (101 ± 4.1ab) and, for V, without protection (46 ± 1.3b), protected with varnish (49.6 ± 1.7ab) and protected with nail varnish (51.1 ± 2.6a). The increase in storage time produced an increase in microhardness. It was concluded that the different GICs, surface protection treatments and storage times could alter the microhardness values.

Preparos cavitários com laser de Er:YAG ou alta rotação: estudo comparativo doselamento de restaurações diretas / Er:YAG laser or high speed turbine: comparative study of the sealament of direct restorations

O objetivo deste estudo in vitro foi avaliar o selamento de restaurações de resina composta e cimento de ionômero de vidro modificado por resina em cavidades de classe V de dentes bovinos diante das seguintes variáveis: preparo cavitário com turbina de alta rotação e preparo cavitário com laser de Er:YAG. Para tanto, foram selecionados 60 dentes bovinos hígidos, provenientes de animais com idade média de três anos. Metade dos espécimes (n=30) foi preparada com turbina de alta rotação e a outra metade (n=30) com laser de Er:YAG. Dos dentes preparados com turbina de alta rotação, metadeda amostra (n=15) foi restaurada com resina composta e o restante restaurado com CIV modificado por resina, ambosde acordo com as instruções do fabricante. O mesmo procedimento foi realizado com os dentes que foram preparados com laser de Er:YAG. Os dentes foram submetidos à metodologia de microinfiltração marginal, empregando como corante a solução aquosa de nitrato de prata. Cada dente foi seccionado em três fatias no sentido vestíbulo-lingual. As fatias foram coladas em lâmina de vidro e devidamente identificadas, para avaliação e mensuração do grau de infiltração marginal em estereomicroscópio- Karl Zeiss com auxílio do programa Image Tool- 3.0. Os resultados revelaram queindependentemente do material empregado, os dentes preparados com laser de Er:YAG apresentaram menores valores para microinfiltração marginal, sendo estes valores estatisticamente significantes.