Strong coupling between a microwave photon and a singlet-triplet qubit.

Combining superconducting resonators and quantum dots has triggered tremendous progress in quantum information, however, attempts at coupling a resonator to even charge parity spin qubits have resulted only in weak spin-photon coupling. Here, we integrate a zincblende InAs nanowire double quantum dot with strong spin-orbit interaction in a magnetic-field resilient, high-quality resonator. The quantum confinement in the nanowire is achieved using deterministically grown wurtzite tunnel barriers. Our experiments on even charge parity states and at large magnetic fields, allow us to identify the relevant spin states and to measure the spin decoherence rates and spin-photon coupling strengths. We find an anti-crossing between the resonator mode in the single photon limit and a singlet-triplet qubit with a spin-photon coupling strength of g/2π = 139 ± 4 MHz. This coherent coupling exceeds the resonator decay rate κ/2π = 19.8 ± 0.2 MHz and the qubit dephasing rate γ/2π = 116 ± 7 MHz, putting our system in the strong coupling regime.

Electrical control of spins and giant g-factors in ring-like coupled quantum dots.

Emerging theoretical concepts for quantum technologies have driven a continuous search for structures where a quantum state, such as spin, can be manipulated efficiently. Central to many concepts is the ability to control a system by electric and magnetic fields, relying on strong spin-orbit interaction and a large g-factor. Here, we present a mechanism for spin and orbital manipulation using small electric and magnetic fields. By hybridizing specific quantum dot states at two points inside InAs nanowires, nearly perfect quantum rings form. Large and highly anisotropic effective g-factors are observed, explained by a strong orbital contribution. Importantly, we find that the orbital contributions can be efficiently quenched by simply detuning the individual quantum dot levels with an electric field. In this way, we demonstrate not only control of the effective g-factor from 80 to almost 0 for the same charge state, but also electrostatic change of the ground state spin.

Vertical Gate-All-Around Nanowire GaSb-InAs Core-Shell n-Type Tunnel FETs.

Tunneling Field-Effect Transistors (TFET) are one of the most promising candidates for future low-power CMOS applications including mobile and Internet of Things (IoT) products. A vertical gate-all-around (VGAA) architecture with a core shell (C-S) structure is the leading contender to meet CMOS footprint requirements while simultaneously delivering high current drive for high performance specifications and subthreshold swing below the Boltzmann limit for low power operation. In this work, VGAA nanowire GaSb/InAs C-S TFETs are demonstrated experimentally for the first time with key device properties of subthreshold swing S = 40 mV/dec (Vd = 10 mV) and current drive up to 40 µA/wire (Vd = 0.3 V, diameter d = 50 nm) while dimensions including core diameter d, shell thickness and gate length are scaled towards CMOS requirements. The experimental data in conjunction with TCAD modeling reveal interface trap density requirements to reach industry standard off-current specifications.

Imaging Atomic Scale Dynamics on III-V Nanowire Surfaces During Electrical Operation.

As semiconductor electronics keep shrinking, functionality depends on individual atomic scale surface and interface features that may change as voltages are applied. In this work we demonstrate a novel device platform that allows scanning tunneling microscopy (STM) imaging with atomic scale resolution across a device simultaneously with full electrical operation. The platform presents a significant step forward as it allows STM to be performed everywhere on the device surface and high temperature processing in reactive gases of the complete device. We demonstrate the new method through proof of principle measurements on both InAs and GaAs nanowire devices with variable biases up to 4 V. On InAs nanowires we observe a surprising removal of atomic defects and smoothing of the surface morphology under applied bias, in contrast to the expected increase in defects and electromigration-related failure. As we use only standard fabrication and scanning instrumentation our concept is widely applicable and opens up the possibility of fundamental investigations of device surface reliability as well as new electronic functionality based on restructuring during operation.

Atomic scale surface structure and morphology of InAs nanowire crystal superlattices: the effect of epitaxial overgrowth.

While shell growth engineering to the atomic scale is important for tailoring semiconductor nanowires with superior properties, a precise knowledge of the surface structure and morphology at different stages of this type of overgrowth has been lacking. We present a systematic scanning tunneling microscopy (STM) study of homoepitaxial shell growth of twinned superlattices in zinc blende InAs nanowires that transforms {111}A/B-type facets to the nonpolar {110}-type. STM imaging along the nanowires provides information on different stages of the shell growth revealing distinct differences in growth dynamics of the crystal facets and surface structures not found in the bulk. While growth of a new surface layer is initiated simultaneously (at the twin plane interface) on the {111}A and {111}B nanofacets, the step flow growth proceeds much faster on {111}A compared to {111}B leading to significant differences in roughness. Further, we observe that the atomic scale structures on the {111}B facet is different from its bulk counterpart and that shell growth on this facet occurs via steps perpendicular to the ⟨112⟩B-type directions.

Time-resolved X-ray diffraction investigation of the modified phonon dispersion in InSb nanowires.

The modified phonon dispersion is of importance for understanding the origin of the reduced heat conductivity in nanowires. We have measured the phonon dispersion for 50 nm diameter InSb (111) nanowires using time-resolved X-ray diffraction. By comparing the sound speed of the bulk (3880 m/s) and that of a classical thin rod (3600 m/s) to our measurement (2880 m/s), we conclude that the origin of the reduced sound speed and thereby to the reduced heat conductivity is that the C44 elastic constant is reduced by 35% compared to the bulk material.

Atomic-scale variability and control of III-V nanowire growth kinetics.

In the growth of nanoscale device structures, the ultimate goal is atomic-level precision. By growing III-V nanowires in a transmission electron microscope, we measured the local kinetics in situ as each atomic plane was added at the catalyst-nanowire growth interface by the vapor-liquid-solid process. During growth of gallium phosphide nanowires at typical V/III ratios, we found surprising fluctuations in growth rate, even under steady growth conditions. We correlated these fluctuations with the formation of twin defects in the nanowire, and found that these variations can be suppressed by switching to growth conditions with a low V/III ratio. We derive a growth model showing that this unexpected variation in local growth kinetics reflects the very different supply pathways of the V and III species. The model explains under which conditions the growth rate can be controlled precisely at the atomic level.

Measurements of light absorption efficiency in InSb nanowires.

We report on measurements of the light absorption efficiency of InSb nanowires. The absorbed 70 fs light pulse generates carriers, which equilibrate with the lattice via electron-phonon coupling. The increase in lattice temperature is manifested as a strain that can be measured with X-ray diffraction. The diffracted X-ray signal from the excited sample was measured using a streak camera. The amount of absorbed light was deduced by comparing X-ray diffraction measurements with simulations. It was found that 3.0(6)% of the radiation incident on the sample was absorbed by the nanowires, which cover 2.5% of the sample.

Control and understanding of kink formation in InAs-InP heterostructure nanowires.

Nanowire heterostructures are of special interest for band structure engineering due to an expanded range of defect-free material combinations. However, the higher degree of freedom in nanowire heterostructure growth comes at the expense of challenges related to nanowire-seed particle interactions, such as undesired composition, grading and kink formation. To better understand the mechanisms of kink formation in nanowires, we here present a detailed study of the dependence of heterostructure nanowire morphology on indium pressure, nanowire diameter, and nanowire density. We investigate InAs-InP-InAs heterostructure nanowires grown with chemical beam epitaxy, which is a material system that allows for very abrupt heterointerfaces. Our observations indicate that the critical parameter for kink formation is the availability of indium, and that the resulting morphology is also highly dependent on the length of the InP segment. It is shown that kinking is associated with the formation of an inclined facet at the interface between InP and InAs, which destabilizes the growth and leads to a change in growth direction. By careful tuning of the growth parameters, it is possible to entirely suppress the formation of this inclined facet and thereby kinking at the heterointerface. Our results also indicate the possibility of producing controllably kinked nanowires with a high yield.

Direct imaging of atomic scale structure and electronic properties of GaAs wurtzite and zinc blende nanowire surfaces.

Using scanning tunneling microscopy and spectroscopy we study the atomic scale geometry and electronic structure of GaAs nanowires exhibiting controlled axial stacking of wurtzite (Wz) and zinc blende (Zb) crystal segments. We find that the nonpolar low-index surfaces {110}, {101[overline]0}, and {112[overline]0} are unreconstructed, unpinned, and without states in the band gap region. Direct comparison between Wz and Zb GaAs reveal a type-II band alignment and a Wz GaAs band gap of 1.52 eV.

The electrical and structural properties of n-type InAs nanowires grown from metal-organic precursors.

The electrical and structural properties of 111B-oriented InAs nanowires grown using metal-organic precursors have been studied. On the basis of electrical measurements it was found that the trends in carbon incorporation are similar to those observed in the layer growth, where an increased As/In precursor ratio and growth temperature result in a decrease in carbon-related impurities. Our results also show that the effect of non-intentional carbon doping is weaker in InAs nanowires compared to bulk, which may be explained by lower carbon incorporation in the nanowire core. We determine that differences in crystal quality, here quantified as the stacking fault density, are not the primary cause for variations in resistivity of the material studied. The effects of some n-dopant precursors (S, Se, Si, Sn) on InAs nanowire morphology, crystal structure and resistivity were also investigated. All precursors result in n-doped nanowires, but high precursor flows of Si and Sn also lead to enhanced radial overgrowth. Use of the Se precursor increases the stacking fault density in wurtzite nanowires, ultimately at high flows leading to a zinc blende crystal structure with strong overgrowth and very low resistivity.

Controlled polytypic and twin-plane superlattices in iii-v nanowires.

Semiconductor nanowires show promise for use in nanoelectronics, fundamental electron transport studies, quantum optics and biological sensing. Such applications require a high degree of nanowire growth control, right down to the atomic level. However, many binary semiconductor nanowires exhibit a high density of randomly distributed twin defects and stacking faults, which results in an uncontrolled, or polytypic, crystal structure. Here, we demonstrate full control of the crystal structure of InAs nanowires by varying nanowire diameter and growth temperature. By selectively tuning the crystal structure, we fabricate highly reproducible polytypic and twin-plane superlattices within single nanowires. In addition to reducing defect densities, this level of control could lead to bandgap engineering and novel electronic behaviour.

Precursor evaluation for in situ InP nanowire doping.

The use of tetraethyltin (TESn) and dimethylzinc (DMZn) as in situ n- and p-dopant precursors during particle-assisted growth of InP nanowires is reported. Gate voltage dependent transport measurements demonstrate that the nanowires can be predictably synthesized as either n- or p-type. These doped nanowires can be characterized based on their electric field response and we find that n-type doping scales over a range from 10(17) to 10(19) cm(-3) with increasing input TESn dopant molar fraction. On the other hand, the p-type doping using DMZn saturates at low levels, probably related to a strong increase in nanowire growth rate with increasing DMZn molar fractions. By optimizing growth conditions with respect to tapering, axial pn-junctions exhibiting rectifying behavior were fabricated. The pn-junctions can be operated as light emitting diodes.

Dominant non-coding repeat expansions in human disease.

The general model that dominant diseases are caused by mutations that result in a gain or change in function of the corresponding protein was challenged by the discovery that the myotonic dystrophy type 1 mutation is a CTG expansion located in the 3' untranslated portion of a kinase gene. The subsequent discovery that a similar transcribed but untranslated CCTG expansion in an intron causes the same multisystemic features in myotonic dystrophy type 2 (DM2), along with other developments in the DM1 field, demonstrate a mechanism in which these expansion mutations cause disease through a gain of function mechanism triggered by the accumulation of transcripts containing CUG or CCUG repeat expansions. A similar RNA gain of function mechanism has also been implicated in fragile X tremor ataxia syndrome (FXTAS) and may play a role in pathogenesis of other non-coding repeat expansion diseases, including spinocerebellar ataxia type 8 (SCA8), SCA10, SCA12 and Huntington disease-like 2.

Myotonic dystrophy type 2: molecular, diagnostic and clinical spectrum.

BACKGROUND: Myotonic dystrophy types 1 (DM1) and 2 (DM2/proximal myotonic myopathy PROMM) are dominantly inherited disorders with unusual multisystemic clinical features. The authors have characterized the clinical and molecular features of DM2/PROMM, which is caused by a CCTG repeat expansion in intron 1 of the zinc finger protein 9 (ZNF9) gene. METHODS: Three-hundred and seventy-nine individuals from 133 DM2/PROMM families were evaluated genetically, and in 234 individuals clinical and molecular features were compared. RESULTS: Among affected individuals 90% had electrical myotonia, 82% weakness, 61% cataracts, 23% diabetes, and 19% cardiac involvement. Because of the repeat tract's unprecedented size (mean approximately 5,000 CCTGs) and somatic instability, expansions were detectable by Southern analysis in only 80% of known carriers. The authors developed a repeat assay that increased the molecular detection rate to 99%. Only 30% of the positive samples had single sizeable expansions by Southern analysis, and 70% showed multiple bands or smears. Among the 101 individuals with single expansions, repeat size did not correlate with age at disease onset. Affected offspring had markedly shorter expansions than their affected parents, with a mean size difference of -17 kb (-4,250 CCTGs). CONCLUSIONS: DM2 is present in a large number of families of northern European ancestry. Clinically, DM2 resembles adult-onset DM1, with myotonia, muscular dystrophy, cataracts, diabetes, testicular failure, hypogammaglobulinemia, and cardiac conduction defects. An important distinction is the lack of a congenital form of DM2. The clinical and molecular parallels between DM1 and DM2 indicate that the multisystemic features common to both diseases are caused by CUG or CCUG expansions expressed at the RNA level.

Up-down photometers for auroral profile studies.

An ultraviolet rocket-borne photometer system currently under development is described which alternately measures zenith and nadir intensities at rocket altitude. This configuration allows calculation of total vertical column intensity of the features observed, and therefore provides information useful in separating temporal and spatial variations in intensities recorded by other instruments with fixed, forward rocket orientations. When it is possible to observe a single spectral feature, calculation of the volume emission rate is possible from the data. Several configurations have been flown which monitor a blend of lambda2972 [OI] ((1)S?(3)) and lambda2977 N(2) second positive (2,0) band, and reference is made to the results. Plans for a system involving also lambda3159 N(2) second positive (1,0) band are described.