In Situ Monitoring of Non-Thermal Plasma Cleaning of Surfactant Encapsulated Nanoparticles.

Surfactants are widely used in the synthesis of nanoparticles, as they have a remarkable ability to direct their growth to obtain well-defined shapes and sizes. However, their post-synthesis removal is a challenge, and the methods used often result in morphological changes that defeat the purpose of the initial controlled growth. Moreover, after the removal of surfactants, the highly active surfaces of nanomaterials may undergo structural reconstruction by exposure to a different environment. Thus, ex situ characterization after air exposure may not reflect the effect of the cleaning methods. Here, combining X-ray photoelectron spectroscopy, in situ infrared reflection absorption spectroscopy, and environmental transmission electron microscopy measurements with CO probe experiments, we investigated different surfactant-removal methods to produce clean metallic Pt nanoparticles from surfactant-encapsulated ones. It was demonstrated that both ultraviolet-ozone (UV-ozone) treatment and room temperature O2 plasma treatment led to the formation of Pt oxides on the surface after the removal of the surfactant. On the other hand, when H2 was used for plasma treatment, both the Pt0 oxidation state and nanoparticle size distribution were preserved. In addition, H2 plasma treatment can reduce Pt oxides after O2-based treatments, resulting in metallic nanoparticles with clean surfaces. These findings provide a better understanding of the various options for surfactant removal from metal nanoparticles and point toward non-thermal plasmas as the best route if the integrity of the nanoparticle needs to be preserved.

Plasma-Enabled Ligand Removal for Improved Catalysis: Furfural Conversion on Pd/SiO2.

A nonthermal, atmospheric He/O2 plasma (NTAP) successfully removed polyvinylpyrrolidone (PVP) from Pd cubic nanoparticles supported on SiO2 quickly and controllably. Transmission electron microscopy (TEM) revealed that the shape and size of Pd nanoparticles remain intact during plasma treatment, unlike mild calcination, which causes sintering and polycrystallinity. Using Fourier transform infrared (FTIR) spectroscopy and X-ray photoelectron spectroscopy (XPS), we demonstrate the quantitative estimation of the PVP plasma removal rate and control of the nanoparticle synthesis. First-principles calculations of the XPS and CO FTIR spectra elucidate electron transfer from the ligand to the metal and allow for estimates of ligand coverages. Reactivity testing indicated that PVP surface crowding inhibits furfural conversion but does not alter furfural selectivity. Overall, the data demonstrate NTAP as a more efficient method than traditional calcination for organic ligand removal in nanoparticle synthesis.

Enhanced Catalytic Hydrodeoxygenation of Activated Carbon-Supported Metal Catalysts via Rapid Plasma Surface Functionalization.

We employ a nonthermal, He/O2 atmospheric plasma as an efficient surface functionalization method of activated carbons. We show that plasma treatment rapidly increases the surface oxygen content from 4.1 to 23.4% on a polymer-based spherical activated carbon in 10 min. Plasma treatment is 3 orders of magnitude faster than acidic oxidation and introduces a diverse range of carbonyl (C═O) and carboxyl (O-C═O) functionalities that were not found with acidic oxidation. The increased oxygen functionalities reduce the particle size of a high 20 wt % loading Cu catalyst by >44% and suppress the formation of large agglomerates. Increased metal dispersion exposes additional active sites and improves the yield of hydrodeoxygenation of 5-hydroxymethyl furfural to 2,5-dimethyl furan, an essential compound for biofuel replacement, by 47%. Surface functionalization via plasma can advance catalysis synthesis while being rapid and sustainable.

Cold-atmospheric-plasma activated-ice as a cooling medium with antimicrobial properties: Case study on fish fillet preservation.

The efficacy and applicability of Plasma Activated Ice (PAI) -produced by cold atmospheric plasma (CAP) technology- on microorganisms and quality characteristics of perishable fresh sea bream (Sparus aurata) fillets, were evaluated. The changes in microbiological load and quality characteristics of fish fillets were investigated during storage with ice from deionized water (Control), PAI and ice from artificially produced water (Artificial) of H2O2 concentrations equal to those of PAI. Fresh sea bream fillets were packed under ice flakes (produced from PAI or Artificial or Control) on layers (as typically done in the relevant industry) and stored at 0.5 °C for 27 days. PAI application inhibited significantly the growth of microbial load of the fillets resulting in reduced growth rates while simultaneously significantly retarded the quality deterioration compared to the other disinfectant media. The use of PAI (with 10 mg/L H2O2) led to a 11-day and 6-day extension, i.e., 2-fold and a âˆ¼ 1.5-fold extension, of the fillets shelf-life compared to the samples treated with Control and Artificial ice, respectively. The results proved the efficiency of PAI in extending the shelf-life of perishable foods during storage (or/and transportation), by validating its antimicrobial properties and cooling capacity.

Microflow chemistry and its electrification for sustainable chemical manufacturing.

Sustainability is vital in solving global societal problems. Still, it requires a holistic view by considering renewable energy and carbon sources, recycling waste streams, environmentally friendly resource extraction and handling, and green manufacturing. Flow chemistry at the microscale can enable continuous sustainable manufacturing by opening up new operating windows, precise residence time control, enhanced mixing and transport, improved yield and productivity, and inherent safety. Furthermore, integrating microfluidic systems with alternative energy sources, such as microwaves and plasmas, offers tremendous promise for electrifying and intensifying modular and distributed chemical processing. This review provides an overview of microflow chemistry, electrification, their integration toward sustainable manufacturing, and their application to biomass upgrade (a select number of other processes are also touched upon). Finally, we identify critical areas for future research, such as matching technology to the scale of the application, techno-economic analysis, and life cycle assessment.

In Situ Tracking of Nonthermal Plasma Etching of ZIF-8 Films.

Surface characterization is critical for understanding the processes used for preparing catalysts, sorbents, and membranes. Nonthermal plasma (NTP) is a process that achieves high reactivity at low temperatures and is used to tailor the surface properties of materials. In this work, we combine the capabilities of infrared reflection absorption spectroscopy (IRRAS) with NTP for the in situ interrogation of zeolitic imidazolate framework-8 (ZIF-8) thin films to probe modifications in the material induced by oxygen and nitrogen plasmas. The IRRAS measurements in oxygen plasma reveal etching of organic ligands with sequential removal of the methyl group and imidazole ring and with the formation of carbonyl moieties (C═O). In contrast, nitrogen plasma induces mild etching and grafting of nitrile groups (-C≡N). Scanning electron microscopy imaging shows that oxygen plasma, at prolonged times, significantly degrades the ZIF-8 film at the grain boundaries. Treatment of ZIF-8 membranes using mild plasma conditions yields a fivefold enhancement for H2/N2 and CO2/CH4 ideal selectivities and an eightfold enhancement for CO2/N2 ideal selectivity. Additionally, the new tools described here can be used for spectroscopic in situ tracking of plasma-induced chemistry on thin films in general.

Food container employing a cold atmospheric plasma source for prolonged preservation of plant and animal origin food products.

Cold Atmospheric Plasma is a non-thermal processing technology with great potential for application to food products as it can effectively reduce the microbial load, leading to substantial shelf-life extension. Herein, we present an easy-to-build and cost-effective Surface Dielectric Barrier Discharge (SDBD) plasma source adjusted to the plastic lid of a common commercial food container made of transparent glass. Implementation and evaluation of plasma treatment in real perishable food products such as sea bream fillets, fresh-cut rocket salads and fresh whole strawberries showed that such device might be efficiently used in-storage for the extension of their shelf-life.•Easy-to-build and cost-effective SDBD plasma source adjusted in a food container for generation of antimicrobial RONS in proximity to treated food product•Treatment of perishable food products by reducing their initial microbial load•In-storage treatment efficient for perishable food products shelf-life extension.

Hydrophobic and superhydrophobic surfaces fabricated using atmospheric pressure cold plasma technology: A review.

Hydrophobic surfaces are often used to reduce wetting of surfaces by water. In particular, superhydrophobic surfaces are highly desired for several applications due to their exceptional properties such as self-cleaning, anti-icing, anti-friction and others. Such surfaces can be prepared via numerous methods including plasma technology, a dry technique with low environmental impact. Atmospheric pressure plasma (APP) has recently attracted significant attention as lower-cost alternative to low-pressure plasmas, and as a candidate for continuous rather than batch processing. Although there are many reviews on water-repellent surfaces, and a few reviews on APP technology, there are hardly any review works on APP processing for hydrophobic and superhydrohobic surface fabrication, a topic of high importance in nanotechnology and interface science. Herein, we critically review the advances on hydrophobic and superhydrophobic surface fabrication using APP technology, trying also to give some perspectives in the field. After a short introduction to superhydrophobicity of nanostructured surfaces and to APPs we focus this review on three different aspects: (1) The atmospheric plasma reactor technology used for fabrication of (super)hydrophobic surfaces. (2) The APP process for hydrophobic surface preparation. The hydrophobic surface preparation processes are categorized methodologically as: a) activation, b) grafting, c) polymerization, d) roughening and hydrophobization. Each category includes subcategories related to different precursors used. (3) One of the most important sections of this review concerns superhydrophobic surfaces fabricated using APP. These are methodologically characterized as follows: a) single step processes where micro-nano textured topography and low surface energy coating are created at the same time, or b) multiple step processes, where these steps occur sequentially in or out of the plasma. We end the review with some perspectives in the field. We aspire to address scientists, who will get involved in the fields of (super)hydrophobicity and/or in atmospheric pressure plasma processing.