Effects of Processing-Induced Contamination on Organic Electronic Devices.

Organic semiconductors are a family of pi-conjugated compounds used in many applications, such as displays, bioelectronics, and thermoelectrics. However, their susceptibility to processing-induced contamination is not well understood. Here, it is shown that many organic electronic devices reported so far may have been unintentionally contaminated, thus affecting their performance, water uptake, and thin film properties. Nuclear magnetic resonance spectroscopy is used to detect and quantify contaminants originating from the glovebox atmosphere and common laboratory consumables used during device fabrication. Importantly, this in-depth understanding of the sources of contamination allows the establishment of clean fabrication protocols, and the fabrication of organic field effect transistors (OFETs) with improved performance and stability. This study highlights the role of unintentional contaminants in organic electronic devices, and demonstrates that certain stringent processing conditions need to be met to avoid scientific misinterpretation, ensure device reproducibility, and facilitate performance stability. The experimental procedures and conditions used herein are typical of those used by many groups in the field of solution-processed organic semiconductors. Therefore, the insights gained into the effects of contamination are likely to be broadly applicable to studies, not just of OFETs, but also of other devices based on these materials.

Prevention of the foreign body response to implantable medical devices by inflammasome inhibition.

SignificanceImplantable electronic medical devices (IEMDs) are used for some clinical applications, representing an exciting prospect for the transformative treatment of intractable conditions such Parkinson's disease, deafness, and paralysis. The use of IEMDs is limited at the moment because, over time, a foreign body reaction (FBR) develops at the device-neural interface such that ultimately the IEMD fails and needs to be removed. Here, we show that macrophage nucleotide-binding oligomerization domain-like receptor family pyrin domain containing 3 (NLRP3) inflammasome activity drives the FBR in a nerve injury model yet integration of an NLRP3 inhibitor into the device prevents FBR while allowing full healing of damaged neural tissue to occur.

Semiconducting Polymers for Neural Applications.

Electronically interfacing with the nervous system for the purposes of health diagnostics and therapy, sports performance monitoring, or device control has been a subject of intense academic and industrial research for decades. This trend has only increased in recent years, with numerous high-profile research initiatives and commercial endeavors. An important research theme has emerged as a result, which is the incorporation of semiconducting polymers in various devices that communicate with the nervous system─from wearable brain-monitoring caps to penetrating implantable microelectrodes. This has been driven by the potential of this broad class of materials to improve the electrical and mechanical properties of the tissue-device interface, along with possibilities for increased biocompatibility. In this review we first begin with a tutorial on neural interfacing, by reviewing the basics of nervous system function, device physics, and neuroelectrophysiological techniques and their demands, and finally we give a brief perspective on how material improvements can address current deficiencies in this system. The second part is a detailed review of past work on semiconducting polymers, covering electrical properties, structure, synthesis, and processing.

Soft Polydimethylsiloxane-Supported Lipid Bilayers for Studying T Cell Interactions.

Much of what we know about the early stages of T cell activation has been obtained from studies of T cells interacting with glass-supported lipid bilayers that favor imaging but are orders of magnitude stiffer than typical cells. We developed a method for attaching lipid bilayers to polydimethylsiloxane polymer supports, producing "soft bilayers" with physiological levels of mechanical resistance (Young's modulus of 4 kPa). Comparisons of T cell behavior on soft and glass-supported bilayers revealed that whereas late stages of T cell activation are thought to be substrate-stiffness dependent, early calcium signaling was unaffected by substrate rigidity, implying that early steps in T cell receptor triggering are not mechanosensitive. The exclusion of large receptor-type phosphatases was observed on the soft bilayers, however, even though it is yet to be demonstrated at authentic cell-cell contacts. This work sets the stage for an imaging-based exploration of receptor signaling under conditions closely mimicking physiological cell-cell contact.

Rapid changes in tissue mechanics regulate cell behaviour in the developing embryonic brain.

Tissue mechanics is important for development; however, the spatio-temporal dynamics of in vivo tissue stiffness is still poorly understood. We here developed tiv-AFM, combining time-lapse in vivo atomic force microscopy with upright fluorescence imaging of embryonic tissue, to show that during development local tissue stiffness changes significantly within tens of minutes. Within this time frame, a stiffness gradient arose in the developing Xenopus brain, and retinal ganglion cell axons turned to follow this gradient. Changes in local tissue stiffness were largely governed by cell proliferation, as perturbation of mitosis diminished both the stiffness gradient and the caudal turn of axons found in control brains. Hence, we identified a close relationship between the dynamics of tissue mechanics and developmental processes, underpinning the importance of time-resolved stiffness measurements.

Effect of vital dyes on human corneal endothelium and elasticity of Descemet's membrane.

The purpose of this study was to evaluate the effects of vital dyes on human Descemet's membranes (DMs) and endothelia. DMs of 25 human cadaveric corneas with research consent were treated with dyes routinely used in Descemet membrane endothelial keratoplasty (DMEK), 0.05% Trypan blue (TB) or a combination of 0.15% Trypan blue, 0.025% Brilliant blue and 4% Polyethylene glycol (commercial name Membrane Blue Dual; MB). The effects of these two dyes on (i) endothelial cell viability, (ii) DM mechanical properties as assessed by atomic force microscopy, and iii) qualitative DM dye retention were tested for two varying exposure times (one or four minutes). No significant differences in cell toxicity were observed between treatments with TB and MB at the two different exposure times (P = 0.21). Further, both dyes led to a significant increase in DM stiffness: exposure to TB and MB for one minute increased the apparent elastic modulus of the DM by 11.2% (P = 8*10-3) and 17.7%, respectively (P = 4*10-6). A four-minute exposure led to an increase of 8.6% for TB (P = 0.004) and 13.6% for MB (P = 0.03). Finally, at 25 minutes, the dye retention of the DM was considerably better for MB compared to TB. Taken together, a one-minute exposure to MB was found to improve DM visibility compared to TB, with a significant increase in DM stiffness and without detrimental effects on endothelial cell viability. The use of MB could therefore improve (i) visibility of the DM scroll, and (ii) intraoperative unfolding, enhancing the probability of successful DMEK surgery.

The adsorption of quinizarin on boron-doped diamond.

The voltammetric response of the quinone species 'quinizarin' (QZ) and its electrocatalytic reduction of oxygen are studied at a boron doped diamond electrode (BDD). It is demonstrated that, contrary to the widespread belief that adsorption of organic molecules on BDD is minimal, not only does QZ readily adsorb to the electrodes surface but this adsorption is also influenced at low surface coverages by the pre-exposure of the electrode to organic solvents. Furthermore, the nature of this adsorbed QZ species is investigated and a potential dependent phase transition is observed. This is to the authors knowledge the first system to exhibit a phase transition of an adsorbed species on a boron doped diamond surface. At low scan rates the system is found to oscillate; these oscillations are ascribed to the presence of a 'negative differential resistance'.

The electrochemistry of quinizarin revealed through its mediated reduction of oxygen.

After 35 years the hunt for improved anthracycline antibiotics is unabated but has yet to achieve the levels of clinical success desired. Electrochemical techniques provide a large amount of kinetic and thermodynamic information, but the use of such procedures is hindered by issues of sensitivity and selectivity. This work demonstrates how by harnessing the mechanism of catalytic reduction of oxygen by the quinone functionality present within the anthracycline structure it is possible to study the reactive moiety in nanomolar concentration. This methodology allows electrochemical investigation of the intercalation of quinizarin into DNA and, in particular, the quinone oxidation and degradation mechanism. The reversible reduction of the quinizarin, which in the presence of oxygen leads to the formation of reactive oxygen species, is found to occur at -0.535 V (vs. SCE) pH 6.84 and the irreversible oxidation leading to the molecules degradation occurs at +0.386 V (vs. SCE) pH 6.84.