Strategic Design of Hemi-Isoindigo Polymer for a Highly Sensitive and Selective All-Printed Flexible Nitrogen Dioxide Chemiresistive Sensor.

The study has developed two hemi-isoindigo (HID)-based polymers for printed flexible resistor-type nitrogen oxide (NO2 ) sensors: poly[2-ethylhexyl 3-((3'",4'-bis(dodecyloxy)-3,4-dimethoxy-[2,2':5',2'"-terthiophen]-5-yl)methylene)-2-oxoindoline-1-carboxylate] (P1) and poly[2-ethylhexyl 2-oxo-3-((3,3'",4,4'-tetrakis(dodecyloxy)-[2,2':5',2'"-terthiophen]-5-yl)methylene)indoline-1-carboxylate] (P2). These polymers feature thermally removable carbamate side chains on the HID units, providing solubility and creating molecular cavities after thermal annealing. These cavities enhance NO2 diffusion, and the liberated unsubstituted amide ─C(═O)NH─ groups readily form robust double hydrogen bonds (DHB), as demonstrated by computer simulations. Furthermore, both polymers possess elevated highest occupied molecular orbital (HOMO) energy levels of -4.74 and -4.77 eV, making them highly susceptible to p-doping by NO2 . Gas sensors fabricated from P1 and P2 films, anneal under optimized conditions to partially remove carbamate side chains, exhibit remarkable sensitivities of +1400% ppm-1 and +3844% ppm-1 , and low detection limit (LOD) values of 514 ppb and 38.9 ppb toward NO2 , respectively. These sensors also demonstrate excellent selectivity for NO2 over other gases.

Silver Nanoparticles Anchored on Single-Walled Carbon Nanotubes via a Conjugated Polymer for Enhanced Sensing Applications.

Single-walled carbon nanotubes (SWCNTs) are candidate matrices for loading metal nanoparticles (NPs) for sensor and catalytic applications owing to their high electron conductivity and mechanical strength, larger surface area, excellent chemical stability, and ease of surface modification. The performance of the formed NP/SWCNT composites is dependent on the NP size, the physical and chemical interactions between the components, and the charge transfer capabilities. Anchoring metal complexes onto the surface of SWCNTs through noncovalent interactions is a viable strategy for achieving high-level metal dispersion and high charge transfer capacities between metal NPs and SWCNTs. However, traditional metal complexes have small molecular sizes, and their noncovalent interactions with SWCNTs are limited to provide excellent sensing and catalytic capability with restricted efficiency and durability. Here, we selected poly(9,9-di-n-dodecylfluorenyl-2,7-diyl-alt-2,2'-bipyridine-5,5') (PFBPy) to increase the noncovalent interactions between silver nanoparticles (AgNPs) and SWCNTs. A silver triflate (Ag-OTf) solution was added into a PFBPy-wrapped SWCNT solution to form Ag-PFBPy complexes on the nanotube surface, after which Ag+ was photoreduced to AgNPs to form a Ag-PFBPy/SWCNT composite in the solution. In various feeding molar ratios of Ag-OTf over the BPy unit (0.4-50), the size of the formed AgNPs may be well-controlled at sub-nm levels to provide them with an energy level comparable to that of the SWCNTs. Additionally, the 2,2'-bipyridine (BPy) unit of the polymer provided a coordinating interaction with Ag+ and the formed AgNPs as well. The 5,5'-linage of BPy with the fluorene unit in PFBPy ensured a straight main chain structure to retain strong π-π interactions with nanotubes before and after Ag+ chelation. All of these factors confirmed a tight contact between the formed AgNPs and SWCNTs, promoting the charge transfer between them and enhancing the sensing capabilities with a 5-fold increase in humidity sensing sensitivity.

Enrichment of Semiconducting Single-Walled Carbon Nanotubes with Indigo-Fluorene-Based Copolymers and Their Use in Printed Thin-Film Transistors and Carbon Dioxide Gas Sensors.

High-purity semiconducting single-walled carbon nanotubes (sc-SWCNTs) are promising for portable and high-sensitivity gas sensors because of their excellent physical and electrical properties. Here, we describe the synthesis of a novel indigo-fluorene-based copolymer (PFIDBoc) that has been designed to selectively enrich sc-SWCNTs with excellent purity (>99.9%) yet contain a latent function in the form of a tert-butoxy (t-BOC)-protected amine that can be later revealed and exploited for carbon dioxide (CO2) gas sensing. SWCNTs wrapped with the PFIDBoc polymer can be easily converted via an on-chip thermal process to reveal a vinylogous amide moiety with a secondary amine nitrogen within the indigo building block of the copolymer which is perfectly suited for CO2 recognition. Thin-film transistors and sensors were inkjet-printed onto rigid and flexible substrates, demonstrating the versatility of enriched PFIDBoc-derived sc-SWCNT dispersions. The printed transistors exhibited a mobility up to 9 cm2 V-1 s-1 and on/off current ratios >105. We further demonstrate herein a CO2 sensor for indoor air quality monitoring even in low humidity environments, possessing a linear response with up to ∼5.4% sensitivity and a dynamic range between 400 and 2000 ppm in air with a relative humidity of ∼ 40%.

Polymer Encapsulants for Threshold Voltage Control in Carbon Nanotube Transistors.

Although carbon nanotube transistors present outstanding performances based on key metrics, large-scale uniformity and repeatability required in printable electronics depend greatly on proper control of the electrostatic environment. Through a survey of polymer dielectric encapsulants compatible with printing processes, a simple correlation is found between the measured interfacial charge density and the onset of conduction in a transistor, providing a rational route to control the electrical characteristics of carbon nanotube transistors. Smooth and continuous balancing of the properties between unipolar p-type and n-type transport is achieved using a molar fraction series of poly(styrene-co-2-vinylpyridine) statistical copolymers combined with an electron-donating molecule. We further demonstrate the easy fabrication of a p-n diode which shows a modest rectification of 8:1.

Probing Ca2+-induced conformational change of calmodulin with gold nanoparticle-decorated single-walled carbon nanotube field-effect transistors.

Nanomaterials are ideal for electrochemical biosensors, with their nanoscale dimensions enabling the sensitive probing of biomolecular interactions. In this study, we compare field-effect transistors (FET) comprised of unsorted (un-) and semiconducting-enriched (sc-) single-walled carbon nanotubes (SWCNTs). un-SWCNTs have both metallic and semiconducting SWCNTs in the ensemble, while sc-SWCNTs have a >99.9% purity of semiconducting nanotubes. Both SWCNT FET devices were decorated with gold nanoparticles (AuNPs) and were then employed in investigating the Ca2+-induced conformational change of calmodulin (CaM) - a vital process in calcium signal transduction in the human body. Different biosensing behavior was observed from FET characteristics of the two types of SWCNTs, with sc-SWCNT FET devices displaying better sensing performance with a dynamic range from 10-15 M to 10-13 M Ca2+, and a lower limit of detection at 10-15 M Ca2+.

Sorting of Semiconducting Single-Walled Carbon Nanotubes in Polar Solvents with an Amphiphilic Conjugated Polymer Provides General Guidelines for Enrichment.

Conjugated polymer extraction (CPE) has been shown to be a highly effective method to isolate high-purity semiconducting single-walled carbon nanotubes (sc-SWCNTs). In both literature reports and industrial manufacturing, this method has enabled enrichment of sc-SWCNTs with high purity (≥99.9%). High selectivity is typically obtained in nonpolar aromatic solvents, yet polar solvents may provide process improvements in terms of yield, purity and efficiency. Using an amphiphilic fluorene-alt-pyridine conjugated copolymer with hydrophilic side chains, we have investigated the enrichment of sc-SWCNTs in polar solvents. Various conditions such as polymer/SWCNT ratio, solvent polarity, solvent dielectric constant as well as polymer solubility and SWCNT dispersibility were explored in order to optimize the purity and yield of the enriched product. Herein, we provide insights on CPE by demonstrating that a conjugated polymer having a hydrophobic backbone and hydrophilic oligo(ethylene oxide) side chains provides near full recovery (95%) of sc-SWCNTs using a multiextraction protocol. High purity is also obtained, and differences in chiral selectivity compared to analogous hydrophobic systems were confirmed by optical absorption and Raman spectroscopy as well as photoluminescence excitation mapping. Taking into consideration the solvent dielectric constant, polarity index as well as polymer solubility and SWCNT dispersibility provides a better understanding of structure-property effects on sc-SWCNT enrichment. The resulting hydrophilic SWCNT dispersions demonstrate long-term colloidal stability, making them suitable for ink formulation and high-performance thin-film transistors fabrication.

Dopant-Modulated Conjugated Polymer Enrichment of Semiconducting SWCNTs.

Conjugated polymer extraction (CPE) is a low-cost, scalable process that can enrich single-walled carbon nanotube (SWCNT) materials in organic media. For other separation methods in aqueous phases, redox chemistry and/or pH control dramatically affect the sorting process of the SWCNTs. We have previously determined that the CPE process can be fine-tuned by adjusting the pH on the tube surface. Here, we systematically studied the effect of redox chemistry on the CPE process by adding organic p-/n-dopants. At a very strong p-/n-doping level, static repulsions dominated the interactions between the tubes and the CPE lost selectivity. When the doping level changed from a medium p-doping to a neutral state, the yield of CPE increased and the selectivity was compromised. We also observed chiral selectivity when a weak p-dopant was used. A photoluminescence excitation mapping under different titration conditions provided more insight into the doping level of the tubes relative to their diameters, chiralities, and redox potentials. We proposed a mechanism for the CPE process. The semiconducting and metallic tubes are separated because of their different solubilities, which are determined by the bundling energy between the tubes and are related to their doping level in polymer solutions.

Determination of cyanocobalamin by isotope dilution LC-MS/MS.

Cyanocobalamin (CNCbl) is an active form of vitamin B12, commonly employed for the preparation of multivitamin supplements and fortified food. In this study, we present a novel analytical method for its determination based on stable isotope dilution liquid chromatography electrospray tandem mass spectrometry (ID LC-MS/MS). Isotopically enriched 13C15NCbl was synthesized in-house and used as internal standard. The method was validated using NIST SRM 3280 multivitamin reference material and by comparison with an independent methodology based on LC-ICPMS. The proposed method provided a detection limit of 57 pg/g and could be applied for the determination of trace level of CNCbl in multivitamin supplements with a relative standard uncertainty better than 3%. The novel ID LC-MS/MS is a primary ratio method that could become a reference for CNCbl determination in multivitamins and food supplements. The method was applied for the characterization of two NRC multivitamin tablet Certified Reference Material (CRM) candidates, VITA-1 and VITB-1 whose CNCbl levels were quantified as 2.64 ± 0.09 and 1.75 ± 0.12 µg/g, respectively.

High-Purity Semiconducting Single-Walled Carbon Nanotubes: A Key Enabling Material in Emerging Electronics.

Semiconducting single-walled carbon nanotubes (sc-SWCNTs) are emerging as a promising material for high-performance, high-density devices as well as low-cost, large-area macroelectronics produced via additive manufacturing methods such as roll-to-roll printing. Proof-of-concept demonstrations have indicated the potential of sc-SWCNTs for digital electronics, radiofrequency circuits, radiation hard memory, improved sensors, and flexible, stretchable, conformable electronics. Advances toward commercial applications bring numerous opportunities in SWCNT materials development and characterization as well as fabrication processes and printing technologies. Commercialization in electronics will require large quantities of sc-SWCNTs, and the challenge for materials science is the development of scalable synthesis, purification, and enrichment methods. While a few synthesis routes have shown promising results in making near-monochiral SWCNTs, gram quantities are available only for small-diameter sc-SWCNTs, which underperform in transistors. Most synthesis routes yield mixtures of SWCNTs, typically 30% metallic and 70% semiconducting, necessitating the extraction of sc-SWCNTs from their metallic counterparts in high purity using scalable postsynthetic methods. Numerous routes to obtain high-purity sc-SWCNTs from raw soot have been developed, including density-gradient ultracentrifugation, chromatography, aqueous two-phase extraction, and selective DNA or polymer wrapping. By these methods (termed sorting or enrichment), >99% sc-SWCNT content can be achieved. Currently, all of these approaches have drawbacks and limitations with respect to electronics applications, such as excessive dilution, expensive consumables, and high ionic impurity content. Excess amount of dispersant is a common challenge that hinders direct inclusion of sc-SWCNTs into electronic devices. At present, conjugated polymer extraction may represent the most practical route to sc-SWCNTs. By the use of polymers with a π-conjugated backbone, sc-SWCNTs with >99.9% purity can be dispersed in organic solvents via a simple sonication and centrifugation process. With 1000 times less excipient and the flexibility to accommodate a broad range of solvents via diverse polymer constructs, inks are readily deployable in solution-based fabrication processes such as aerosol spray, inkjet, and gravure. Further gains in sc-SWCNT purity, among other attributes, are possible with a better understanding of the structure-property relationships that govern conjugated polymer extraction. This Account covers three interlinked topics in SWCNT electronics: metrology, enrichment, and SWCNT transistors fabricated via solution processes. First, we describe how spectroscopic techniques such as optical absorption, fluorescence, and Raman spectroscopy are applied for sc-SWCNT purity assessment. Stringent requirements for sc-SWCNTs in electronics are pushing the techniques to new levels while serving as an important driver toward the development of quantitative metrology. Next, we highlight recent progress in understanding the sc-SWCNT enrichment process using conjugated polymers, with special consideration given to the effect of doping on the mechanism. Finally, developments in sc-SWCNT-based electronics are described, with emphasis on the performance of transistors utilizing random networks of sc-SWCNTs as the semiconducting channel material. Challenges and advances associated with using polymer-based dielectrics in the unique context of sc-SWCNT transistors are presented. Such transistor packages have enabled the realization of fully printed transistors as well as transparent and even stretchable transistors as a result of the unique and excellent electrical and mechanical properties of sc-SWCNTs.

Interaction Potency of Single-Walled Carbon Nanotubes with DNAs: A Novel Assay for Assessment of Hazard Risk.

Increasing use of single-walled carbon nanotubes (SWCNTs) necessitates a novel method for hazard risk assessment. In this work, we investigated the interaction of several types of commercial SWCNTs with single-stranded (ss) and double-stranded (ds) DNA oligonucleotides (20-mer and 20 bp). Based on the results achieved, we proposed a novel assay that employed the DNA interaction potency to assess the hazard risk of SWCNTs. It was found that SWCNTs in different sizes or different batches of the same product number of SWCNTs showed dramatically different potency of interaction with DNAs. In addition, the same SWCNTs also exerted strikingly different interaction potency with ss- versus ds- DNAs. The interaction rates of SWCNTs with DNAs were investigated, which could be utilized as the indicator of potential hazard for acute exposure. Compared to solid SWCNTs, the SWCNTs dispersed in liquid medium (2% sodium cholate solution) exhibited dramatically different interaction potency with DNAs. This indicates that the exposure medium may greatly influence the subsequent toxicity and hazard risk produced by SWCNTs. Based on the findings of dose-dependences and time-dependences from the interactions between SWCNTs and DNAs, a new chemistry based assay for hazard risk assessment of nanomaterials including SWCNTs has been presented.

Determination of chemical purity and isotopic composition of natural and carbon-13-labeled arsenobetaine bromide standards by quantitative(1)H-NMR.

In this study, we report the characterization of three arsenobetaine-certified reference materials by quantitative NMR. We have synthesized an arsenobetaine bromide high-purity standard of natural isotopic composition (ABET-1) and two carbon-13-labeled isotopic standards (BBET-1 and CBET-1). Assignments of the chemical purity and isotopic composition are not trivial in the case of arsenobetaine, and in this study we utilized quantitative(1)H-NMR techniques for the determination of the mass fractions (chemical purity). The isotopic purity of all three standards was also assessed by NMR from the carbon-13 satellite signals. The standards are non-hygroscopic, high-purity (ca. 0.99 g/g), and the carbon-13 enrichment for both isotopic standards is x((13)C)≈0.99. These standards are designed for use as primary calibrators for mass spectrometric determination of arsenobetaine in environmental samples.

A hybrid enrichment process combining conjugated polymer extraction and silica gel adsorption for high purity semiconducting single-walled carbon nanotubes (SWCNT).

A novel purification process for the enrichment of sc-SWCNTs that combines selective conjugated polymer extraction (CPE) with selective adsorption using silica gel, termed hybrid-CPE (h-CPE), has been developed, providing a high purity sc-SWCNT material with a significant improvement in process efficiency and yield. Using the h-CPE protocol, a greater than 5 fold improvement in yield can be obtained compared to traditional CPE while obtaining sc-SWCNT with a purity >99.9% as assessed by absorption spectroscopy and Raman mapping. Thin film transistor devices using the h-CPE derived sc-SWCNTs as the semiconductor possess mobility values ranging from 10-30 cm(2) V(-1) s(-1) and current ON/OFF ratio of 10(4)-10(5) for channel lengths between 2.5 and 20 µm.

Superhydrophobic stability of nanotube array surfaces under impact and static forces.

The surfaces of nanotube arrays were coated with poly(methyl methacrylate) (PMMA) using an imprinting method with an anodized alumina membrane as the template. The prepared nanotube array surfaces then either remained untreated or were coated with NH2(CH2)3Si(OCH3)3(PDNS) or CF3(CF2)7CH2CH2Si(OC2H5)3 (PFO). Thus, nanotube arrays with three different surfaces, PDNS, PMMA (without coating), and PFO, were obtained. All three surfaces (PDNS, PMMA, and PFO) exhibited superhydrophobic properties with contact angles (CA) of 155, 166, and 168°, respectively, and their intrinsic water contact angles were 30, 79, and 118°, respectively. The superhydrophobic stabilities of these three surfaces were examined under dynamic impact and static pressures in terms of the transition from the Cassie-Baxter mode to the Wenzel mode. This transition was determined by the maximum pressure (p(max)), which is dependent on the intrinsic contact angle and the nanotube density of the surface. A p(max) greater than 10 kPa, which is sufficiently large to maintain stable superhydrophobicity under extreme weather conditions, such as in heavy rain, was expected from the PFO surface. Interestingly, the PDNS surface, with an intrinsic CA of only 30°, also displayed superhydrophobicity, with a CA of 155°. This property was partially maintained under the dynamic impact and static pressure tests. However, under an extremely high pressure (0.5 MPa), all three surfaces transitioned from the Cassie-Baxter mode to the Wenzel mode. Furthermore, the lost superhydrophobicity could not be recovered by simply relieving the pressure. This result indicates that the best way to maintain superhydrophobicity is to increase the p(max) of the surface to a value higher than the applied external pressure by using low surface energy materials and having high-density binary nano-/microstructures on the surface.

Enrichment of large-diameter semiconducting SWCNTs by polyfluorene extraction for high network density thin film transistors.

A systematic study on the use of 9,9-dialkylfluorene homopolymers (PFs) for large-diameter semiconducting (sc-) single-walled carbon nanotube (SWCNT) enrichment is the focus of this report. The enrichment is based on a simple three-step extraction process: (1) dispersion of as-produced SWCNTs in a PF solution; (2) centrifugation at a low speed to separate the enriched sc-tubes; (3) filtration to collect the enriched sc-SWCNTs and remove excess polymer. The effect of the extraction conditions on the purity and yield including molecular weight and alkyl side-chain length of the polymers, SWCNT concentration, and polymer/SWCNT ratio have been examined. It was observed that PFs with alkyl chain lengths of C10, C12, C14, and C18, all have an excellent capability to enrich laser-ablation sc-SWCNTs when their molecular weight is larger than ∼10 000 Da. More detailed studies were therefore carried out with the C12 polymer, poly(9,9-di-n-dodecylfluorene), PFDD. It was found that a high polymer/SWCNT ratio leads to an enhanced yield but a reduced sc-purity. A ratio of 0.5-1.0 gives an excellent sc-purity and a yield of 5-10% in a single extraction as assessed by UV-vis-NIR absorption spectra. The yield can also be promoted by multiple extractions while maintaining high sc-purity. Mechanistic experiments involving time-lapse dispersion studies reveal that m-SWCNTs have a lower propensity to be dispersed, yielding a sc-SWCNT enriched material in the supernatant. Dispersion stability studies with partially enriched sc-SWCNT material further reveal that m-SWCNTs : PFDD complexes will re-aggregate faster than sc-SWCNTs : PFDD complexes, providing further sc-SWCNT enrichment. This result confirms that the enrichment was due to the much tighter bundles in raw materials and the more rapid bundling in dispersion of the m-SWCNTs. The sc-purity is also confirmed by Raman spectroscopy and photoluminescence excitation (PLE) mapping. The latter shows that the enriched sc-SWCNT sample has a narrow chirality and diameter distribution dominated by the (10,9) species with d = 1.29 nm. The enriched sc-SWCNTs allow a simple drop-casting method to form a dense nanotube network on SiO2/Si substrates, leading to thin film transistors (TFTs) with an average mobility of 27 cm(2) V(-1) s(-1) and an average on/off current ratio of 1.8 × 10(6) when considering all 25 devices having 25 µm channel length prepared on a single chip. The results presented herein demonstrate how an easily scalable technique provides large-diameter sc-SWCNTs with high purity, further enabling the best TFT performance reported to date for conjugated polymer enriched sc-SWCNTs.

Ice-phobic coatings based on silicon-oil-infused polydimethylsiloxane.

A simple and low-cost technique for the preparation of silicon-oil-infused polydimethylsiloxane (PDMS) coatings with different silicon oil contents have been developed and studied. This material is designed for ice-phobic applications, and thus a high hydrophobic property of PDMS is maintained by avoiding any polar groups such as C═O and OH in the structure. Therefore, the polymer main chain was attached with vinyl and Si-H groups to obtain a cross-linking capability, meanwhile to ensure a nonpolar chemical structure. Its ice-phobic property has been investigated in terms of ice adhesion strength (tensile and shear), water contact angle, icing dynamics using high-speed photography and morphology using TEM, SEM and AFM. The prepared coating surface shows a low surface energy and very low ice adhesion strength of 50 kPa, only about 3% of the value on a bare aluminum (Al) surface. In the silicon oil infused PDMS coatings, the low surface energy of the silicon oil and PDMS, and the high mobility of silicon oil played an important role on the ice-phobic property. Both of these factors offer the surface a large water contact angle and hence a small contact area, leading to the formation of a loose ice layer. In addition, the oil infused polymer structure significantly reduces the contact area of the ice with solid substrate since the ice mostly contacts with the mobile oil. This leads to a very weak interaction between the substrate and ice, consequently significantly reduces the ice adhesion strength on the surface. Therefore, such material could be a good candidate for ice-phobic coatings on which the accumulated ice may be easily removed by a nature force, such as wind, gravity, and vibration.

Verification of icephobic/anti-icing properties of a superhydrophobic surface.

Four aluminum surfaces with wettability varied from superhydrophilic to superhydrophobic were prepared by combining an etching and a coating process. The surface wettability was checked in terms of water contact angle (CA) and sliding angle (SA) under different humidity at -10 °C. High-speed photography was applied to study water droplet impact dynamics on these surfaces. It was found that single and successive water droplets could rebound on the superhydrophobic surface and roll off at a tilt angle larger than 30° under an extremely condensing weather condition (-10 °C and relative humidity of 85-90%). In addition, the superhydrophobic surface showed a strong icephobic property, the ice adhesion on this surface was only 13% of that on the superhydrophilic surface, though they had a similar nano/microtopological structure. Moreover, this superhydrophobic surface displayed an excellent durability of the icephobic property. The ice adhesion only increased to 20% and 16% of that on the superhydrophobic surface after the surface was undergone 20 icing/ice-breaking cycles and 40 icing/ice-melting cycles, respectively. Surface profile and XPS studies on these surfaces indicated a minor damage of the surface nano/microstructure and the coating layer upon these multiple ice-breaking and ice-melting processes. Therefore, this superhydrophobic surface could be a good candidate for icephobic applications.

Novel ethyl-derivatization approach for the determination of fluoride by headspace gas chromatography/mass spectrometry.

We report a novel derivatization chemistry for determination of fluoride based on the batch reaction of fluoride ions with triethyloxonium tetrachloroferrate(III) in a closed vessel to yield fluoroethane. Gaseous fluoroethane was readily separated from the matrix, sampled from the headspace, and determined by gas chromatography/mass spectrometry. The method was validated using rainwater certified reference material (IRMM CA408) and subsequently applied to the determination of fluoride in various matrixes, including tap water, seawater, and urine. An instrumental limit of detection of 3.2 µg/L with a linear range up to 50 mg/L was achieved. The proposed derivatization is a one-step reaction, requires no organic solvents, and is safe, as the derivatizing agent is nonvolatile. Determination of fluoride is affected by common fluoride-complexing agents, such as Al(III) and Fe(III). The effect of large amounts of these interferences was studied, and the adverse effect of these ions was eliminated by use of the method of standard additions.

Degradation mechanism of benzodithiophene-based conjugated polymers when exposed to light in air.

We report the investigation of the air photostability of benzo[1,2-b:4,5-b']dithiophene (BDT) based conjugated polymers using UV-visible spectroscopy, X-ray photoelectron spectroscopy, gel permeation chromatography, and nuclear magnetic resonance spectroscopy. Three low band gap alternating D-A copolymers consisting of 3-fluoro-2-heptylcarbonylthieno[3,4-b]thiophene and alkyl-substituted BDT, alkoxy-substituted BDT, or dithienosilole, respectively, were prepared for investigating their photovoltaic performance and photostability. After only two hours of simultaneous exposure to light and air, the main absorption peak of the polymer films containing BDT units blue-shifted and its intensity dramatically decreased. We demonstrated that the BDT unit underwent dramatic structural change under illumination in air by reacting with the oxygen molecules at the excited state, leading to the disruption of the main-chain conjugation of the polymer. As a result, the color of the alkyl-BDT based polymer film permanently changed from deep blue to light yellow. In contrast, the dithienosilole based polymer was quite stable when treated under the same condition with negligible change in the absorption spectrum.

Determination of arsenobetaine in fish tissue by species specific isotope dilution LC-LTQ-Orbitrap-MS and standard addition LC-ICPMS.

An accurate and precise method for the determination of arsenobetaine (AsB, (CH(3))(3)(+)AsCH(2)COO(-)) in fish samples using exact matching species specific isotope dilution (ID) liquid chromatography LTQ-Orbitrap mass spectrometry (LC-LTQ-Orbitrap-MS) and standard addition LC inductively coupled plasma mass spectrometry (LC-ICPMS) is described. Samples were extracted by sonication for 30 min with high purity deionized water. An in-house synthesized (13)C enriched AsB spike was used for species specific ID analysis whereas natural abundance AsB, synthesized and characterized by quantitative (1)H NMR (nuclear magnetic resonance spectroscopy), was used for reverse ID and standard addition LC-ICPMS. With the LTQ-Orbitrap-MS instrument in scan mode (m/z 170-190) and resolution set at 7500, the intensities of [M + H](+) ions at m/z of 179.0053 and 180.0087 were used to calculate the 179.0053/180.0087 ion ratio for quantification of AsB in fish tissues. To circumvent potential difficulty in mass bias correction, an exact matching approach was applied. A quantitatively prepared mixture of the natural abundance AsB standard and the enriched spike to give a ratio near one was used for mass bias correction. Concentrations of 9.65 ± 0.24 and 11.39 ± 0.39 mg kg(-1) (expanded uncertainty, k = 2) for AsB in two fish samples of fish1 and fish2, respectively, were obtained by ID LC-LTQ-Orbitrap-MS. These results are in good agreement with those obtained by standard addition LC-ICPMS, 9.56 ± 0.32 and 11.26 ± 0.44 mg kg(-1) (expanded uncertainty, k = 2), respectively. Fish CRM DORM-2 was used for method validation and measured results of 37.9 ± 1.8 and 38.7 ± 0.66 mg kg(-1) (expanded uncertainty, k = 2) for AsB obtained by standard addition LC-ICPMS and ID LC-LTQ-Orbitrap-MS, respectively, are in good agreement with the certified value of 39.0 ± 2.6 mg kg(-1) (expanded uncertainty, k = 2). Detection limits of 0.011 and 0.033 mg kg(-1) for AsB with LC-ICPMS and ID LC-LTQ-Orbitrap-MS, respectively, were obtained demonstrating that the technique is well suited to the determination AsB in fish samples. To the best of our knowledge, this is first application of species specific isotope dilution for the accurate and precise determination of AsB in biological tissues.

Bulk heterojunction solar cells using thieno[3,4-c]pyrrole-4,6-dione and dithieno[3,2-b:2',3'-d]silole copolymer with a power conversion efficiency of 7.3%.

A new alternating copolymer of dithienosilole and thienopyrrole-4,6-dione (PDTSTPD) possesses both a low optical bandgap (1.73 eV) and a deep highest occupied molecular orbital energy level (5.57 eV). The introduction of branched alkyl chains to the dithienosilole unit was found to be critical for the improvement of the polymer solubility. When blended with PC(71)BM, PDTSTPD exhibited a power conversion efficiency of 7.3% on the photovoltaic devices with an active area of 1 cm(2).