ABSTRACT
BACKGROUND: Organomodified nanoclays (ONC), two-dimensional montmorillonite with organic coatings, are increasingly used to improve nanocomposite properties. However, little is known about pulmonary health risks along the nanoclay life cycle even with increased evidence of airborne particulate exposures in occupational environments. Recently, oropharyngeal aspiration exposure to pre- and post-incinerated ONC in mice caused low grade, persistent lung inflammation with a pro-fibrotic signaling response with unknown mode(s) of action. We hypothesized that the organic coating presence and incineration status of nanoclays determine the inflammatory cytokine secretary profile and cytotoxic response of macrophages. To test this hypothesis differentiated human macrophages (THP-1) were acutely exposed (0-20 µg/cm2) to pristine, uncoated nanoclay (CloisNa), an ONC (Clois30B), their incinerated byproducts (I-CloisNa and I-Clois30B), and crystalline silica (CS) followed by cytotoxicity and inflammatory endpoints. Macrophages were co-exposed to lipopolysaccharide (LPS) or LPS-free medium to assess the role of priming the NF-κB pathway in macrophage response to nanoclay treatment. Data were compared to inflammatory responses in male C57Bl/6J mice following 30 and 300 µg/mouse aspiration exposure to the same particles. RESULTS: In LPS-free media, CloisNa exposure caused mitochondrial depolarization while Clois30B exposure caused reduced macrophage viability, greater cytotoxicity, and significant damage-associated molecular patterns (IL-1α and ATP) release compared to CloisNa and unexposed controls. LPS priming with low CloisNa doses caused elevated cathepsin B/Caspage-1/IL-1ß release while higher doses resulted in apoptosis. Clois30B exposure caused dose-dependent THP-1 cell pyroptosis evidenced by Cathepsin B and IL-1ß release and Gasdermin D cleavage. Incineration ablated the cytotoxic and inflammatory effects of Clois30B while I-CloisNa still retained some mild inflammatory potential. Comparative analyses suggested that in vitro macrophage cell viability, inflammasome endpoints, and pro-inflammatory cytokine profiles significantly correlated to mouse bronchioalveolar lavage inflammation metrics including inflammatory cell recruitment. CONCLUSIONS: Presence of organic coating and incineration status influenced inflammatory and cytotoxic responses following exposure to human macrophages. Clois30B, with a quaternary ammonium tallow coating, induced a robust cell membrane damage and pyroptosis effect which was eliminated after incineration. Conversely, incinerated nanoclay exposure primarily caused elevated inflammatory cytokine release from THP-1 cells. Collectively, pre-incinerated nanoclay displayed interaction with macrophage membrane components (molecular initiating event), increased pro-inflammatory mediators, and increased inflammatory cell recruitment (two key events) in the lung fibrosis adverse outcome pathway.
Subject(s)
Cathepsin B , Lipopolysaccharides , Male , Humans , Mice , Animals , Cathepsin B/metabolism , Cathepsin B/pharmacology , Lipopolysaccharides/pharmacology , High-Throughput Screening Assays , Inflammation/chemically induced , Inflammation/metabolism , Macrophages , Cytokines/metabolism , Interleukin-1beta/metabolismABSTRACT
Metal-organic frameworks (MOFs) are hybrids formed through the coordination of metal ions and organic linkers in organic solvents. The implementation of MOFs in biomedical and industrial applications has led to concerns regarding their safety. Herein, the profile of a selected MOF, a zeolitic imidazole framework, was evaluated upon exposure to human lung epithelial cells. The platform for evaluation was a real-time technique (i.e., electric cell-substrate impedance sensing [ECIS]). This study identifies and discusses some of the deleterious effects of the selected MOF on the exposed cells. Furthermore, this study demonstrates the benefits of using the real-time method versus other biochemical assays for comprehensive cell evaluations. The study concludes that observed changes in cell behavior could hint at possible toxicity induced upon exposure to MOFs of different physicochemical characteristics and the dosage of those frameworks being used. By understanding changes in cell behavior, one foresees the ability to improve safe-by-design strategies of MOFs to be used for biomedical applications by specifically tailoring their physicochemical characteristics.
Subject(s)
Metal-Organic Frameworks , Humans , Biological Assay , Electric Impedance , Electricity , Epithelial CellsABSTRACT
This chapter describes compiled methods for the formation and manipulation of microtubule-kinesin-carbon nanodots conjugates in user-defined synthetic environments. Specifically, by using inherited self-assembly and self-recognition properties of tubulin cytoskeletal protein and by interfacing this protein with lab synthesized carbon nanodots, bio-nano hybrid interfaces were formed. Further manipulation of such biohybrids under the mechanical cycle of kinesin 1 ATP-ase molecular motor led to their integration on user-controlled engineered surfaces. Presented methods are foreseen to lead to microtubule-molecular motor-hybrid based assemblies formation with applications ranging from biosensing, to nanoelectronics and single molecule printing, just to name a few.
Subject(s)
Biosensing Techniques , Quantum Dots , Carbon/metabolism , Kinesins , Microtubules/metabolismABSTRACT
Enzymes are proteins that control the efficiency and effectiveness of biological reactions and systems, as well as of engineered biomimetic processes. This review highlights current applications of a diverse range of enzymes for biofuel production, plastics, and chemical waste management, as well as for detergent, textile, and food production and preservation industries respectively. Challenges regarding the transposition of enzymes from their natural purpose and environment into synthetic practice are discussed. For example, temperature and pH-induced enzyme fragilities, short shelf life, low-cost efficiency, poor user-controllability, and subsequently insufficient catalytic activity were shown to decrease pertinence and profitability in large-scale production considerations. Enzyme immobilization was shown to improve and expand upon enzyme usage within a profit and impact-oriented commercial world and through enzyme-material and interfaces integration. With particular focus on the growing biomedical market, examples of enzyme immobilization within or onto hyaluronic acid (HA)-based complexes are discussed as a definable way to improve upon and/or make possible the next generation of medical undertakings. As a polysaccharide formed in every living organism, HA has proven beneficial in biomedicine for its high biocompatibility and controllable biodegradability, viscoelasticity, and hydrophilicity. Complexes developed with this molecule have been utilized to selectively deliver drugs to a desired location and at a desired rate, improve the efficiency of tissue regeneration, and serve as a viable platform for biologically accepted sensors. In similar realms of enzyme immobilization, HA's ease in crosslinking allows the molecule to user-controllably enhance the design of a given platform in terms of both chemical and physical characteristics to thus best support successful and sustained enzyme usage. Such examples do not only demonstrate the potential of enzyme-based applications but further, emphasize future market trends and accountability.
Subject(s)
Enzymes, Immobilized , Hyaluronic Acid , BiomimeticsABSTRACT
Properties such as large surface area, high pore volume, high chemical and thermal stability, and structural flexibility render zeolitic imidazolate frameworks (ZIFs) well-suited materials for gas separation, chemical sensors, and optical and electrical devices. For such applications, film processing is a prerequisite. Herein, matrix-assisted pulsed laser evaporation (MAPLE) was successfully used as a single-step deposition process to fabricate ZIF-8 films. By correlating laser fluency and controlling the specific transfer of lab-synthesized ZIF-8, films with user-controlled physical and chemical properties were obtained. Films' characteristics were evaluated by scanning electron microscopy (SEM), energy-dispersive X-ray (EDX) spectroscopy, X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, and X-ray photoelectron spectroscopy (XPS). The analysis showed that frameworks of ZIF-8 can be deposited successfully and controllably to yield polycrystalline films. The deposited films maintained the integrity of the individual ZIF-8 framework, while undergoing minor crystalline and surface chemistry changes. No significant changes in particle size were observed. Our study demonstrated control over both the MAPLE deposition conditions and the outcome, as well as the suitability of the listed deposition method to create composite architectures that could potentially be used in applications ranging from selective membranes to gas sensors.
ABSTRACT
Carbonic anhydrases are enzymes capable of transforming carbon dioxide into bicarbonate to maintain functionality of biological systems. Synthetic isolation and implementation of carbonic anhydrases into membrane have recently raised hopes for emerging and efficient strategies that could reduce greenhouse emission and the footprint of anthropogenic activities. However, implementation of such enzymes is currently challenged by the resulting membrane's wetting capability, overall membrane performance for gas sensing, adsorption and transformation, and by the low solubility of carbon dioxide in water, the required medium for enzyme functionality. We developed the next generation of enzyme-based interfaces capable to efficiently adsorb and reduce carbon dioxide at room temperature. For this, we integrated carbonic anhydrase with a hydrophilic, user-synthesized metal-organic framework; we showed how the framework's porosity and controlled morphology contribute to viable enzyme binding to create functional surfaces for the adsorption and reduction of carbon dioxide. Our analysis based on electron and atomic microscopy, infrared spectroscopy, and colorimetric assays demonstrated the functionality of such interfaces, while Brunauer-Emmett-Teller analysis and gas chromatography analysis allowed additional evaluation of the efficiency of carbon dioxide adsorption and reduction. Our study is expected to impact the design and development of active interfaces based on enzymes to be used as green approaches for carbon dioxide transformation and mitigation of global anthropogenic activities.
ABSTRACT
BACKGROUND: Cardiac glycosides (CGs), such as digitoxin, are traditionally used for treatment of congestive heart failure; recently they also gained attention for their anticancer properties. Previous studies showed that digitoxin and a synthetic L-sugar monosaccharide analog treatment decreases cancer cell proliferation, increases apoptosis, and pro-adhesion abilities; however, no reports are available on their potential to alter lung cancer cell cytoskeleton structure and reduce migratory ability. Herein, we investigated the anticancer effects of digitoxin and its analog, digitoxigenin-α-L-rhamnoside (D6MA), to establish whether cytoskeleton reorganization and reduced motility are drug-induced cellular outcomes. METHODS: We treated non-small cell lung carcinoma cells (NSCLCs) with sub-therapeutic, therapeutic, and toxic concentrations of digitoxin and D6MA respectively, followed by both single point and real-time assays to evaluate changes in cellular gene and protein expression, adhesion, elasticity, and migration. RESULTS: Digitoxin and D6MA induced a decrease in matrix metalloproteinases expression via altered focal adhesion signaling and a suppression of the phosphoinositide 3-kinases / protein kinase B pathway which lead to enhanced adhesion, altered elasticity, and reduced motility of NSCLCs. Global gene expression analysis identified dose-dependent changes to nuclear factor kappa-light-chain-enhancer, epithelial tumor, and microtubule dynamics signaling. CONCLUSIONS: Our study demonstrates that digitoxin and D6MA can target antitumor signaling pathways to alter NSCLC cytoskeleton and migratory ability to thus potentially reduce their tumorigenicity. SIGNIFICANCE: Discovering signaling pathways that control cancer's cell phenotype and how such pathways are affected by CG treatment will potentially allow for active usage of synthetic CG analogs as therapeutic agents in advanced lung conditions.
Subject(s)
Antineoplastic Agents/chemistry , Antineoplastic Agents/pharmacology , Carcinoma, Non-Small-Cell Lung/drug therapy , Digitoxin/analogs & derivatives , Digitoxin/pharmacology , Lung Neoplasms/drug therapy , Carcinoma, Non-Small-Cell Lung/pathology , Cell Line, Tumor , Cell Movement/drug effects , Cytoskeleton/drug effects , Cytoskeleton/pathology , Humans , Lung Neoplasms/pathologyABSTRACT
Advancing ultrahigh resolution (below 10 nm) direct writing technologies could lead to impacts in areas as diverse as disease detection, genetic analysis and nanomanufacturing. Current methods based on electron-beams and photo- or dip-pen nanolithography are laborious and lack flexibility when aiming to create single molecule patterns for application specific integration. We hypothesize that a novel strategy could be developed to allow for writing of parallel and yet individually addressable patterns of single molecules on user-controlled surfaces. The strategy is based on using in vitro self-recognition of tubulin protein to assemble rigid protofilaments of microtubules, with one such microtubule to be subsequently used as a "bio-pen" capable of writing "inks" of single kinesin molecules in user-defined environments. Our results show that single kinesin inks could be written under the energy of adenosine triphosphate hydrolysis and observed by both atomic force and optical microscopy. Upon extending ink functionalities, the integration of soft and hard materials for nanostructure assembly and complex single molecule pattern formation is envisioned.
ABSTRACT
Certain nanosized particles like carbon nanotubes (CNTs) are known to induce pulmonary fibrosis, but the underlying mechanisms are unclear, and efforts to prevent this disease are lacking. Fibroblast-associated stem cells (FSCs) have been suggested as a critical driver of fibrosis induced by CNTs by serving as a renewable source of extracellular matrix-producing cells; however, a detailed understanding of this process remains obscure. Here, we demonstrated that single-walled CNTs induced FSC acquisition and fibrogenic responses in primary human lung fibroblasts. This was indicated by increased expression of stem cell markers (e.g., CD44 and ABCG2) and fibrogenic markers (e.g., collagen and α-SMA) in CNT-exposed cells. These cells also showed increased sphere formation, anoikis resistance, and aldehyde dehydrogenase (ALDH) activities, which are characteristics of stem cells. Mechanistic studies revealed sex-determining region Y-box 2 (SOX2), a self-renewal associated transcription factor, as a key driver of FSC acquisition and fibrogenesis. Upregulation and colocalization of SOX2 and COL1 were found in the fibrotic lung tissues of CNT-exposed mice via oropharyngeal aspiration after 56 days. The knockdown of SOX2 by gene silencing abrogated the fibrogenic and FSC-inducing effects of CNTs. Chromatin immunoprecipitation assays identified SOX2-binding sites on COL1A1 and COL1A2, indicating SOX2 as a transcription factor in collagen synthesis. SOX2 was also found to play a critical role in TGF-ß-induced fibrogenesis through its collagen- and FSC-inducing effects. Since many nanomaterials are known to induce TGF-ß, our findings that SOX2 regulate FSCs and fibrogenesis may have broad implications on the fibrogenic mechanisms and treatment strategies of various nanomaterial-induced fibrotic disorders.
Subject(s)
Nanotubes, Carbon , Pulmonary Fibrosis , Animals , Fibroblasts , Lung , Mice , Nanotubes, Carbon/adverse effects , Pulmonary Fibrosis/chemically induced , Stem CellsABSTRACT
Graphene and carbon quantum dots (GQDs and CQDs) are relatively new nanomaterials that have demonstrated impact in multiple different fields thanks to their unique quantum properties and excellent biocompatibility. Biosensing, analyte detection and monitoring wherein a key feature is coupled molecular recognition and signal transduction, is one such field that is being greatly advanced by the use of GQDs and CQDs. In this review, recent progress on the development of biotransducers and biosensors enabled by the creative use of GQDs and CQDs is reviewed, with special emphasis on how these materials specifically interface with biomolecules to improve overall analyte detection. This review also introduces nano-enabled biotransducers and different biosensing configurations and strategies, as well as highlights key properties of GQDs and CQDs that are pertinent to functional biotransducer design. Following relevant introductory material, the literature is surveyed with emphasis on work performed over the last 5 years. General comments and suggestions to advance the direction and potential of the field are included throughout the review. The strategic purpose is to inspire and guide future investigations into biosensor design for quality and safety, as well as serve as a primer for developing GQD- and CQD-based biosensors.
ABSTRACT
Manufacturing, processing, use, and disposal of nanoclay-enabled composites potentially lead to the release of nanoclay particles from the polymer matrix in which they are embedded; however, exposures to airborne particles are poorly understood. The present study was conducted to characterize airborne particles released during sanding of nanoclay-enabled thermoplastic composites. Two types of nanoclay, Cloisite® 25A and Cloisite® 93A, were dispersed in polypropylene at 0%, 1%, and 4% loading by weight. Zirconium aluminum oxide (P100/P180 grits) and silicon carbide (P120/P320 grits) sandpapers were used to abrade composites in controlled experiments followed by real-time and offline particle analyses. Overall, sanding the virgin polypropylene with zirconium aluminum oxide sandpaper released more particles compared to silicon carbide sandpaper, with the later exhibiting similar or lower concentrations than that of polypropylene. Thus, a further investigation was performed for the samples collected using the zirconium aluminum oxide sandpaper. The 1% 25A, 1% 93A, and 4% 93A composites generated substantially higher particle number concentrations (1.3-2.6 times) and respirable mass concentrations (1.2-2.3 times) relative to the virgin polypropylene, while the 4% 25A composite produced comparable results, regardless of sandpaper type. It was observed that the majority of the inhalable particles were originated from composite materials with a significant number of protrusions of nanoclay (18-59%). These findings indicate that the percent loading and dispersion of nanoclay in the polypropylene modified the mechanical properties and thus, along with sandpaper type, affected the number of particles released during sanding, implicating the cause of potential adverse health effects.
ABSTRACT
INTRODUCTION: The flexibility and tunability of metal organic frameworks (MOFs), crystalline porous materials composed of a network of metal ions coordinated by organic ligands, confer their variety of applications as drug delivery systems or as sensing and imaging agents. However, such properties also add to the difficulty in ensuring their safe implementation when interaction with biological systems is considered. METHODS: In the current study, we used real-time sensorial strategies and cellular-based approaches to allow for fast and effective screening of two MOFs of prevalent use, namely, MIL-160 representative of a hydrophilic and ZIF-8 representative of a hydrophobic framework. The two MOFs were synthesized "in house" and exposed to human bronchial epithelial (BEAS-2B) cells, a pertinent toxicological screening model. RESULTS: Analysis allowed evaluation and differentiation of particle-induced cellular effects as well identification of different degrees and routes of toxicity, all in a high-throughput manner. Our results show the importance of performing screening toxicity assessments before introducing MOFs to biomedical applications. DISCUSSION: Our proposed screening assays could be extended to a wider variety of cell lines to allow for identification of any deleterious effects of MOFs, with the range of toxic mechanisms to be differentiated based on cell viability, morphology and cell-substrate interactions, respectively. CONCLUSION: Our analysis highlights the importance of considering the physicochemical properties of MOFs when recommending a MOF-based therapeutic option or MOFs implementation in biomedical applications.
Subject(s)
Epithelial Cells/pathology , Lung/pathology , Metal-Organic Frameworks/toxicity , Metal-Organic Frameworks/therapeutic use , Toxicity Tests , Cell Line , Cell Survival/drug effects , Epithelial Cells/drug effects , Humans , Metal-Organic Frameworks/ultrastructureABSTRACT
Acetylcholinesterase (AChE), an efficient biocatalyst known to hydrolyze the neurotransmitter acetylcholine, could be inactivated in the presence of insecticides, nerve agents or other drug inhibitors to thus result in disrupted neurotransmission. Improvement in the peripheral cholinergic function, as well as overall cognition and neuronal functions of an exposed system could be achieved if the mechanisms of inhibitions are deactivated in a controlled fashion and with rapid response time. Herein, we proposed to develop a simple AChE biosensor capable to realize the rapid detection of neurotoxins. Our approach uses a nanoporous gold film (NPGF) and reduced graphene oxide-tin dioxide nanoparticle (RGO-SnO2) nanocomposite to define the highly active electrode interface where the electrochemical monitoring of the interaction between AChE and its target molecule, fasciculin, could take place. Our results demonstrate that the established biosensor had the ability to monitor fasciculin concentrations at the ultra-low limit of detection of 8 pM, an inhibition rate of 8% and within only 30min of electrochemical exposure. Our study provides a convenient technology for the rapid and ultrasensitive detection of neurotoxins and has the potential for large applicability to other drugs or toxins screening.
Subject(s)
Elapid Venoms/analysis , Gold/chemistry , Nanopores , Neurotoxins/analysis , Electrochemical Techniques , Electrodes , Surface PropertiesABSTRACT
Cancer stem cells (CSCs) are a key driver of tumor formation and metastasis, but how they are affected by nanomaterials is largely unknown. The present study investigated the effects of different carbon-based nanomaterials (CNMs) on neoplastic and CSC-like transformation of human small airway epithelial cells and determined the underlying mechanisms. Using a physiologically relevant exposure model (long-term/low-dose) with system validation using a human carcinogen, asbestos, we demonstrated that single-walled carbon nanotubes, multi-walled carbon nanotubes, ultrafine carbon black, and crocidolite asbestos induced particle-specific anchorage-independent colony formation, DNA-strand break, and p53 downregulation, indicating genotoxicity and carcinogenic potential of CNMs. The chronic CNM-exposed cells exhibited CSC-like properties as indicated by 3D spheroid formation, anoikis resistance, and CSC markers expression. Mechanistic studies revealed specific self-renewal and epithelial-mesenchymal transition (EMT)-related transcription factors that are involved in the cellular transformation process. Pathway analysis of gene signaling networks supports the role of SOX2 and SNAI1 signaling in CNM-mediated transformation. These findings support the potential carcinogenicity of high aspect ratio CNMs and identified molecular targets and signaling pathways that may contribute to the disease development.
ABSTRACT
Photocatalytic properties of 2,5-furandicarboxylic acid (FDCA), a model organic molecule used for biopolymer production, are reported for the first time. Further integration of FDCA into metal-organic framework (MOF) structures and subsequent silver-based photoactivation leads to the next generation of hybrids with controlled morphologies, capable of forming sensorial platforms for prevalent phenol contaminant detection. The mechanisms that allow photocatalytic functionality are driven by the charge carrier generation in the organic molecule (either in its alone or integrated form) and depend on sample's physical and chemical properties as confirmed by scanning and transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and X-ray diffraction, respectively. Electrochemical analysis using cyclic voltammetry confirmed high sensitivity for p-nitrophenol (p-NP) detection as dictated by the selective electron migration at a user-controlled electrode interface. Considering the wide usage of p-NP and its increased discharge shown to lead to harmful effects on both the environment and biosystems, this new detection method is envisioned to allow effective control and regulation of such compound release, all under low-cost and environmentally friendly conditions.
ABSTRACT
Hydrophobicity indices for poly(HEMA)-based hydrogels: HEMA, AEMA, and DMAEMA calculated from two different methods: 1) Partition coefficients, and 2) Kyte-Doolittle scale are depicted. Thermograms from differential scanning calorimetry of poly(HEMA)-based hydrogels containing AEMA, DMAEMA, and a mixture of AEMA and DMAEMA are included to represent the glass transition temperature (Tg) values of the hydrogels. More information on the methodology to calculate the hydrophobicity indices using the aforementioned methods and the procedure for using a differential scanning calorimeter and analysis of a thermogram is described. Details of how the changes in the feed composition of poly(HEMA)-based hydrogels was made is provided in the research article 'MOLECULAR ENGINEERING OF POLY(HEMA-co-PEGMA)-BASED HYDROGELS: ROLE OF MINOR AEMA AND DMAEMA INCLUSION' (Bhat et al., 2019).[1].
ABSTRACT
Hydrogel membranes of in-dwelling pH-responsive devices are of interest for the development of biomedical sensors that must measure small changes in pH associated with tissue acidosis. Poly(2-hydroxyethyl methacrylate)-based hydrogels possessing minor amounts of the cationogenic N-(2-aminoethyl) methacrylamide (AEMA) (4â¯mol%) or a tertiary amine moiety, N,N-(2-dimethylamino)ethyl methacrylamide (DMAEMA) (4â¯mol%) or AEMA-DMAEMA (2â¯mol% each) were UV cross-linked with 1â¯mol% tetra(ethylene glycol) diacrylate (TEGDA) and the degree of hydration, free and bound water distribution, glass transition temperature, elastic modulus, membrane resistance and protein adsorption were studied. Correlation analysis reveals that each of these biotechnical properties is strongly anti-correlated with total hydration (-0.92) and that the bound water content dominates this anti-correlation (~-0.83). However, free water shows a direct, though only weak correlation with these properties (~+0.5). Thus, minor changes in the hydrogel composition (~4â¯mol%) can significantly influence biomaterials properties and may be useful in tailoring hydrogel properties for application in biosensors and engineered tissue scaffolds.
Subject(s)
Hydrogels/chemistry , Methacrylates/chemistry , Polyhydroxyethyl Methacrylate/chemistry , Polymers/chemistry , Adsorption , Biosensing Techniques , Hydrogen-Ion ConcentrationABSTRACT
This research proposed to create the next generation of versatile electrochemical-based biosensors capable of monitoring target capture and release as dictated by molecular binding or unbinding. The biosensor integrates cellular machines (i.e., microtubules, structural elements of cells and kinesin molecular motors involved in cellular transport) as functional units; its assembly is based on molecular self-assembly and self-recognition. Our results demonstrate that the designed biosensor was capable of allowing detection of binding and unbinding events based on redox reactions at user-controlled electrode interfaces. The analysis also showed that the sensitivity of the designed biosensor or its ability to record such events could be user-controlled at any given time by adjusting the energy source that "fuels" the system.
Subject(s)
Biosensing Techniques/instrumentation , Biosensing Techniques/methods , Adenosine Triphosphate , Electrochemical Techniques , Electrodes , Kinesins/chemistry , Kinesins/metabolism , Microtubules/chemistry , Microtubules/metabolism , Nanotechnology , Oxidation-Reduction , Protein BindingABSTRACT
Carbonic anhydrase (CA) was previously proposed as a green alternative for biomineralization of carbon dioxide (CO2). However, enzyme's fragile nature when in synthetic environment significantly limits such industrial application. Herein, we hypothesized that CA immobilization onto flexible and hydrated "bridges" that ensure proton-transfer at their interfaces leads to improved activity and kinetic behavior and potentially increases enzyme's feasibility for industrial implementation. Our hypothesis was formulated considering that water plays a key role in the CO2 hydration process and acts as both the reactant as well as the rate-limiting step of the CO2 capture and transformation process. To demonstrate our hypothesis, two types of user-synthesized organic metallic frameworks [metal-organic frameworks (MOFs), one hydrophilic and one hydrophobic] were considered as model supports and their surface characteristics (i.e., charge, shape, curvature, size, etc.) and influence on the immobilized enzyme's behavior were evaluated. Morphology, crystallinity and particle size, and surface area of the model supports were determined by scanning electron microscopy, dynamic light scattering, and nitrogen adsorption/desorption measurements, respectively. Enzyme activity, kinetics, and stability at the supports interfaces were determined using spectroscopical analyses. Analysis showed that enzyme functionality is dependent on the support used in the immobilization process, with the enzyme immobilized onto the hydrophilic support retaining 72% activity of the free CA, when compared with that immobilized onto the hydrophobic one that only retained about 28% activity. Both CA-MOF conjugates showed good storage stability relative to the free enzyme in solution, with CA immobilized at the hydrophilic support also revealing increased thermal stability and retention of almost all original enzyme activity even after heating treatment at 70 °C. In contrast, free CA lost almost half of its original activity when subject to the same conditions. This present work suggests that MOFs tunable hydration conditions allow high enzyme activity and stability retention. Such results are expected to impact CO2 storage and transformation strategies based on CA and potentially increase user-integration of enzyme-based green technologies in mitigating global warming.
Subject(s)
Carbon Dioxide/chemistry , Carbonic Anhydrases/chemistry , Enzymes, Immobilized/chemistry , Metal-Organic Frameworks/chemistry , KineticsABSTRACT
Fibroblast stem cells or stemlike cells (FSCs) are proposed to play a pivotal role in extracellular matrix (ECM) regeneration by serving as a key source of ECM-producing fibroblasts. We developed a mechanism-based in vitro model for fibrogenicity testing of nanomaterials based on their ability to induce FSCs. Using a FSC-enriched fibroblast focus model to mimic in vivo fibrogenic response, we demonstrated a dose-dependent increase in fibroblast focus formation and collagen production by primary lung fibroblasts treated with multiwalled carbon nanotubes (MWCNTs). The focus-forming cells exhibited stem properties as indicated by stem cell markers expression, sphere formation, and ALDH activity assays. Inhibition of ALDH activity diminished the focus and sphere formation as well as collagen production. In vivo animal studies supported the in vitro findings and indicated the potential utility of FSC-based assays as a rapid screening tool for fibrogenicity testing of nanomaterials. This study also unveils a novel mechanism of nanotube-induced fibrogenesis through ALDH-dependent FSC activation.