ABSTRACT
The feasibility of producing activated carbon (AC) from real Household Mixed Plastic Waste (HMPW) comprising of LDPE, HDPE, PP, PS, and PET for carbon capture via direct carbonisation followed by microwave-assisted or conventional thermally assisted chemical activation was investigated. A microwave-assisted activation procedure was adopted to assess the impact on the CO2 capture capacity of the resulting AC using both a lower temperature (400 °C vs. 700 °C) and a shorter duration (5 vs. 120 mins) than that required for conventional activation. The results obtained showed that the AC yield was 71 and 78% for the conventional and microwave-assisted samples, respectively. Microwave activation consumed five-fold less energy (0.19 kWh) than the conventional activation (0.98 kWh). Thermal stability results indicated total weight loss of 10.0 and 8.3 wt%, respectively, for conventional and microwave-activated samples over the temperature range of 25-1000 °C, with ACs from both activation routes displaying a type 1 nitrogen isotherm. The dynamic CO2 uptake capacity at 1 bar and 25 °C was 1.53 mmol/g, with maximum equilibrium uptake ranging between 1.32 and 2.39 mmol/g at temperatures (0-50 °C) and 1 bar for the conventionally activated AC. The analogous microwave-activated sample showed a higher dynamic CO2 uptake of 1.62 mmol/g and equilibrium uptake in the range 1.58-2.88 mmol/g under equivalent conditions. The results therefore indicate that microwave activation results in enhanced carbon capture potential. To the best of our knowledge, this is the first-time microwave heating has been employed to convert household mixed plastic wastes directly into ACs for carbon capture applications. This report therefore demonstrates that the management of mixed plastics could lead to the development of a circular economy through the conversion of waste into value-added materials.
Subject(s)
Carbon Dioxide , Charcoal , Feasibility Studies , Temperature , MicrowavesABSTRACT
The ocean absorbs a significant amount of carbon dioxide (CO2) from the atmosphere, helping regulate Earth's climate. However, our knowledge of ocean CO2 sink levels remains limited. This research focused on assessing daily changes in ocean CO2 sink levels and air-sea CO2 exchange, using a new technique. We used LiDAR technology, which provides continuous measurements during day and night, to estimate global ocean CO2 absorption over 23 years. Our model successfully reproduced sea surface partial pressure of CO2 data. The results suggest the total amount of CO2 absorbed by oceans is higher at night than during the day. This difference arises from a combination of factors like temperatures, winds, photosynthesis, and respiration. Understanding these daily fluctuations can improve predictions of ocean CO2 uptake. It may also help explain why current carbon budget calculations are not fully balanced-an issue scientists have grappled with. Overall, this pioneering study highlights the value of LiDAR's unique day-night ocean data coverage. The findings advance knowledge of ocean carbon cycles and their role in climate regulation. They underscore the need to incorporate day-night variability when assessing the ocean's carbon sink capacity.