p-Thiocresol Functionalized Cesium Lead Bromide (PTC@CsPbBr3): A Fluorometric Sensing Probe for the Detection of Cholesterol.

Inorganic halide-based perovskites (e.g., cesium lead bromide) are tremendously useful semiconducting materials due to their unique optoelectronic properties. However, degradation of these perovskites under humid conditions is one of the major drawbacks to prevent their wide applications. Herein, passivated cesium lead bromide nanoparticles are synthesized using p-thiocresol as a passivating ligand, and this stable version of perovskite is later applied successfully as a sensor probe towards cholesterol detection. The designed sensor can detect cholesterol with a lower detection limit of 0.24 ppm and a fast response time of 10 s. The mechanism of quenching PTC@CsPbBr3 upon the gradual addition of cholesterol is discussed. Further, the sensor is successfully applied in the detection of cholesterol in real samples (blood serum). This work presents PTC@CsPbBr3 as a novel sensing platform for detecting cholesterol well in biomedical applications.

Removal of oils and organic solvents from wastewater through swelling of porous crosslinked poly(ethylene-co-vinyl acetate): Preparation of adsorbent and their oil removal efficiency.

In this novel study, an attempt has been made to prepare porous crosslinked poly(ethylene-co-vinyl acetate) polymer (C-EVA). The porous C-EVA was prepared by grafting of maleic anhydride and cetyl alcohol onto the polymer backbone with addition of NaCl as porogen in the brabender mixture at 120 °C and 80 rpm. This was followed by leaching of NaCl with water extraction to generate a highly porous polymer structure which was evident from its SEM micrographs. The polymer was found to have excellent swelling capacity in various oils and organic solvents and showed good selective absorption capacity. The reusability of the synthesized polymer was studied and it was found that it could be reused for more than 30 absorption desorption cycles without undergoing much change in its absorption capacity. The cross-linked polymeric composite was further characterized by FTIR, TGA, XRD, and SEM.

Flexible Asymmetric Supercapacitor Based on Functionalized Reduced Graphene Oxide Aerogels with Wide Working Potential Window.

Flexible energy storage devices are in great demand since the advent of flexible electronics. Until now, flexible supercapacitors based on graphene analogues usually have had low operating potential windows. To this end, two dissimilar electrode materials with complementary potential ranges are employed to obtain an optimum cell voltage of 1.8 V. A low-temperature organic sol-gel method is used to prepare two different types of functionalized reduced graphene oxide aerogels (rGOA) where Ag nanorod functionalized rGOA acts as a negative electrode while polyaniline nanotube functionalized rGOA acts as a positive electrode. Both materials comprehensively exploit their unique properties to produce a device that has high energy and power densities. An assembled all-solid-state asymmetric supercapacitor gives a high energy density of 52.85 W h kg-1 and power density of 31.5 kW kg-1 with excellent cycling and temperature stability. The device also performs extraordinarily well under different bending conditions, suggesting its potential to meet the requirements for flexible electronics.