Design of Organic Cathode Material Based on Quinone and Pyrazine Motifs for Rechargeable Lithium and Zinc Batteries.

Despite the rapid expansion of the organic cathode materials field, we still face a shortage of materials obtained through simple synthesis that have stable cycling and high energy density. Herein, we report a two-step synthesis of a small organic molecule from commercially available precursors that can be used as a cathode material. Oxidized tetraquinoxalinecatechol (OTQC) was derived from tetraquinoxalinecatechol (TQC) by the introduction of additional quinone redox-active centers into the structure. The modification increased the voltage and capacity of the material. The OTQC delivers a high specific capacity of 327 mAh g-1 with an average voltage of 2.63 V vs Li/Li+ in the Li-ion battery. That corresponds to an energy density of 860 Wh kg-1 on the OTQC material level. Furthermore, the material demonstrated excellent cycling stability, having a capacity retention of 82% after 400 cycles. Similarly, the OTQC demonstrates increased average voltage and specific capacity in comparison with TQC in aqueous Zn-organic battery, reaching the specific capacity of 326 mAh g-1 with an average voltage of 0.86 V vs Zn/Zn2+. Apart from good electrochemical performance, this work provides an additional in-depth analysis of the redox mechanism and degradation mechanism related to capacity fading.

Organic Cathodes, a Path toward Future Sustainable Batteries: Mirage or Realistic Future?

Organic active materials are seen as next-generation battery materials that could circumvent the sustainability and cost limitations connected with the current Li-ion battery technology while at the same time enabling novel battery functionalities like a bioderived feedstock, biodegradability, and mechanical flexibility. Many promising research results have recently been published. However, the reproducibility and comparison of the literature results are somehow limited due to highly variable electrode formulations and electrochemical testing conditions. In this Perspective, we provide a critical view of the organic cathode active materials and suggest future guidelines for electrochemical characterization, capacity evaluation, and mechanistic investigation to facilitate reproducibility and benchmarking of literature results, leading to the accelerated development of organic electrode active materials for practical applications.

A phenazine-based conjugated microporous polymer as a high performing cathode for aluminium-organic batteries.

One of the possible solutions to circumvent the sluggish kinetics, low capacity, and poor integrity of inorganic cathodes commonly used in rechargeable aluminium batteries (RABs) is the use of redox-active polymers as cathodes. They are not only sustainable materials characterised by their structure tunability, but also exhibit a unique ion coordination redox mechanism that makes them versatile ion hosts suitable for voluminous aluminium cation complexes, as demonstrated by the poly(quinoyl) family. Recently, phenazine-based compounds have been found to have high capacity, reversibility and fast redox kinetics in aqueous electrolytes because of the presence of a CN double bond. Here, we present one of the first examples of a phenazine-based hybrid microporous polymer, referred to as IEP-27-SR, utilized as an organic cathode in an aluminium battery with an AlCl3/EMIMCl ionic liquid electrolyte. The preliminary redox and charge storage mechanism of IEP-27-SR was confirmed by ex situ ATR-IR and EDS analyses. The introduction of phenazine active units in a robust microporous framework resulted in a remarkable rate capability (specific capacity of 116 mA h g-1 at 0.5C with 77% capacity retention at 10C) and notable cycling stability, maintaining 75% of its initial capacity after 3440 charge-discharge cycles at 1C (127 days of continuous cycling). This superior performance compared to reported Al//n-type organic cathode RABs is attributed to the stable 3D porous microstructure and the presence of micro/mesoporosity in IEP-27-SR, which facilitates electrolyte permeability and improves kinetics.

A novel calcium fluorinated alkoxyaluminate salt as a next step towards Ca metal anode rechargeable batteries.

Ca metal anode rechargeable batteries are seen as a sustainable high-energy density and high-voltage alternative to the current Li-ion battery technology due to the low redox potential of Ca metal and abundance of Ca. Electrolytes are key enablers on the path towards next-generation battery systems. Within this work, we synthesize a new calcium tetrakis(hexafluoroisopropyloxy) aluminate salt, Ca[Al(hfip)4]2, and benchmark it versus the state-of-the-art boron analogue Ca[B(hfip)4]2. The newly developed aluminate-based electrolyte exhibits improved performance in terms of conductivity, Ca plating/stripping efficiency, and oxidative stability as well as Ca battery cell performance. A marked improvement of 0.5 V higher oxidative stability can pave the path towards high-voltage Ca batteries. A critical issue of solvent quality during salt synthesis is identified as well as solvent decomposition at the Ca metal/electrolyte interface, which leads to passivation of the Ca metal anode. However, the new aluminate salt with preferable electrochemical properties over the existing boron analogue opens up a new area for future Ca battery research based on aluminium compounds.

Correlating Structural Properties with Electrochemical Behavior of Non-graphitizable Carbons in Na-Ion Batteries.

We report on a detailed structural versus electrochemical property investigation of the corncob-derived non-graphitizable carbons prepared at different carbonization temperatures using a combination of structural characterization methodology unique to this field. Non-graphitizable carbons are currently the most viable option for the negative electrode in sodium-ion batteries. However, many challenges arise from the strong dependence of the precursor's choice and carbonization parameters on the evolution of the carbon matrix and its resulting electrochemistry. We followed structure development upon the increase in carbonization temperature with thorough structural characterization and electrochemical testing. With the increase of carbonization temperature from 900 to 1600 °C, our prepared materials exhibited a trend toward increasing structural order, an increase in the specific surface area of micropores, the development of ultramicroporosity, and an increase in conductivity. This was clearly demonstrated by a synergy of small- and wide-angle X-ray scattering, scanning transmission electron microscopy, and electron-energy loss spectroscopy techniques. Three-electrode full cell measurements confirmed incomplete desodiation of Na+ ions from the non-graphitizable carbons in the first cycle due to the formation of a solid-electrolyte interface and Na trapping in the pores, followed by a stable second cycle. The study of cycling stability over 100 cycles in a half-cell configuration confirmed the observed high irreversible capacity in the first cycle, which stabilized to a slow decrease afterward, with the Coulombic efficiency reaching 99% after 30 cycles and then stabilizing between 99.3 and 99.5%. Subsequently, a strong correlation between the determined structural properties and the electrochemical behavior was established.

On the nanoscale structural evolution of solid discharge products in lithium-sulfur batteries using operando scattering.

The inadequate understanding of the mechanisms that reversibly convert molecular sulfur (S) into lithium sulfide (Li2S) via soluble polysulfides (PSs) formation impedes the development of high-performance lithium-sulfur (Li-S) batteries with non-aqueous electrolyte solutions. Here, we use operando small and wide angle X-ray scattering and operando small angle neutron scattering (SANS) measurements to track the nucleation, growth and dissolution of solid deposits from atomic to sub-micron scales during real-time Li-S cell operation. In particular, stochastic modelling based on the SANS data allows quantifying the nanoscale phase evolution during battery cycling. We show that next to nano-crystalline Li2S the deposit comprises solid short-chain PSs particles. The analysis of the experimental data suggests that initially, Li2S2 precipitates from the solution and then is partially converted via solid-state electroreduction to Li2S. We further demonstrate that mass transport, rather than electron transport through a thin passivating film, limits the discharge capacity and rate performance in Li-S cells.

On the Practical Applications of the Magnesium Fluorinated Alkoxyaluminate Electrolyte in Mg Battery Cells.

High-performance electrolytes are at the heart of magnesium battery development. Long-term stability along with the low potential difference between plating and stripping processes are needed to consider them for next-generation battery devices. Within this work, we perform an in-depth characterization of the novel Mg[Al(hfip)4]2 salt in different glyme-based electrolytes. Specific importance is given to the influence of water content and the role of additives in the electrolyte. Mg[Al(hfip)4]2-based electrolytes exemplify high tolerance to water presence and the beneficial effect of additives under aggravated cycling conditions. Finally, electrolyte compatibility is tested with three different types of Mg cathodes, spanning different types of electrochemical mechanisms (Chevrel phase, organic cathode, sulfur). Benchmarking with an electrolyte containing a state-of-the-art Mg[B(hfip)4]2 salt exemplifies an improved performance of electrolytes comprising the Mg[Al(hfip)4]2 salt and establishes Mg[Al(hfip)4]2 as a new standard salt for the future Mg battery research.

Characterization of Electrochemical Processes in Metal-Organic Batteries by X-ray Raman Spectroscopy.

X-ray Raman spectroscopy (XRS) is an emerging spectroscopic technique that utilizes inelastic scattering of hard X-rays to study X-ray absorption edges of low Z elements in bulk material. It was used to identify and quantify the amount of carbonyl bonds in a cathode sample, in order to track the redox reaction inside metal-organic batteries during the charge/discharge cycle. XRS was used to record the oxygen K-edge absorption spectra of organic polymer cathodes from different multivalent metal-organic batteries. The amount of carbonyl bond in each sample was determined by modeling the oxygen K-edge XRS spectra with the linear combination of two reference compounds that mimicked the fully charged and the fully discharged phases of the battery. To interpret experimental XRS spectra, theoretical calculations of oxygen K-edge absorption spectra based on density functional theory were performed. Overall, a good agreement between the amount of carbonyl bond present during different stages of battery cycle, calculated from linear combination of standards, and the amount obtained from electrochemical characterization based on measured capacity was achieved. The electrochemical mechanism in all studied batteries was confirmed to be a reduction of double carbonyl bond and the intermediate anion was identified with the help of theoretical calculations. X-ray Raman spectroscopy of the oxygen K-edge was shown to be a viable characterization technique for accurate tracking of the redox reaction inside metal-organic batteries.

Sulfur valence-to-core X-ray emission spectroscopy study of lithium sulfur batteries.

In this work, valence-to-core (VtC) Kß sulfur X-ray emission spectroscopy (XES) was used to perform quantitative analysis of different sulfur compounds produced in a lithium sulfur (Li-S) battery during discharge. The analysis is based on the theoretical sulfur Kß XES spectra obtained from ab initio quantum chemical calculations based on density functional theory. The emphasis is given to the Kß sulfur XES spectra of the polysulfide molecules (Li2Sx, x = 2,,8) produced electrochemically within the Li-S battery. Ab initio molecular dynamics calculations are used further to calculate also the Kß spectra of Li2Sx dissolved in a model solvent. Calculated spectra were directly compared with the experimental ones collected with a Johansson type tender XES spectrometer on laboratory synthesized Li2Sx reference standards and pre-cycled battery cathodes. These results demonstrate that sulfur VtC XES can be used effectively to quantitatively analyze electrochemical sulfur conversion, also in a smaller laboratory without the need for large scale synchrotron facilities.

Characterization of Li-S Batteries Using Laboratory Sulfur X-ray Emission Spectroscopy.

Application of laboratory-based X-ray analytical techniques that are capable of a reliable characterization of the chemical state of sulfur within bulk battery cathode in parallel with electrochemical characterization is essential for further development of lithium-sulfur batteries. In this work, MeV proton-induced X-ray emission (XES) sulfur measurements were performed in ex situ mode on laboratory-synthesized sulfur standards and precycled battery cathodes. The average sulfur charge was determined from the energy shift of the Kα emission line and from the spectral shape of the Kß emission spectrum. Finally, operando Kα XES measurements were performed to monitor reduction of sulfur within battery cathode during discharge. The experimental approach presented here provides an important step toward more routine laboratory analysis of sulfur-based battery systems and also other sulfur-neighboring low-Z bulk materials with emission energies in the tender X-ray range.

Building Ab Initio Interface Pourbaix diagrams to Investigate Electrolyte Stability in the Electrochemical Double Layer: Application to Magnesium Batteries.

Insights into the electrochemical processes occurring at the electrode-electrolyte interface are a crucial step in most electrochemistry domains and in particular in the optimization of the battery technology. However, studying potential-dependent processes at the interface is one of the biggest challenges, both for theoreticians and experimentalists. The challenge is pushed further when stable species also depend on the concentration of specific ligands in the electrolyte, such as chlorides. Herein, we present a general theoretical ab initio methodology to compute a Pourbaix-like diagram of complex electrolytes as a function of electrode potential and anion's chemical potential, that is, concentration. This approach is developed not only for the bulk properties of the electrolytes but also for electrode-electrolyte interfaces. In the case of chlorinated magnesium complexes in dimethoxyethane, we show that the stability domains of the different species are strongly shifted at the interface compared to the bulk of the electrolyte because of the strong local electric fields and charges occurring in the double layer. Thus, as the interfacial stability domains are strongly modified, this approach is necessary to investigate all interface properties that often govern the reaction kinetics, such as solvent degradation at the electrode. Interface Pourbaix diagram is used to give some insights into the improved stability at the Mg anode induced by the addition of chloride. Because of its far-reaching insights, transferability, and wide applicability, the methodology presented herein should serve as a valuable tool not only for the battery community but also for the wider electrochemical one.

Electrolyte Reactivity in the Double Layer in Mg Batteries: An Interface Potential-Dependent DFT Study.

The electrochemical degradation of two solvent-based electrolytes for Mg-metal batteries is investigated through a grand canonical density functional theory (DFT) approach. Both electrolytes are highly reactive in the double layer region where the solvated species have no direct contact with the Mg-surface, hence emphasizing that surface reactions are not the only phenomena responsible for electrolyte degradation. Applied to dimethoxyethane (DME) and ethylene carbonate (EC), the present methodology shows that both solvents should thermodynamically decompose in the double layer prior to the Mg2+/Mg0 reduction, leading to electrochemically inactive reaction products. Based on thermodynamic considerations, Mg0 deposition should not be possible, which contrasts with experiments, at least for DME-based electrolytes. This apparent contradiction is here addressed through the rationalization of the electrochemical mechanism underlying solvent electroactivation. An extended operation potential window (OPW) is extracted, in which the Mg2+/Mg0 reduction can compete with electrolyte decomposition, thus enabling battery operation beyond the solvated species thermodynamic stability. The chemical study of the degradation products is in excellent agreement with experiments and offers rationale for the Mg-battery failure in EC electrolyte and capacity fade in DME electrolyte. The potential-dependent approach proposed herein is thus able to successfully tackle the challenging problem of interface electrochemistry. Being fully transferable to any other electrochemical systems, this methodology should provide rational guidelines for the development of viable electrolytes for multivalent batteries and, more generally, energy conversion and storage devices.

Morphology evolution of magnesium facets: DFT and KMC simulations.

One of the crucial steps for the development of batteries is understanding the interface stability and morphological changes occurring during continuous stripping and deposition. In order to investigate the dependence of morphology evolution on surface orientation, we examine the energetics and growth mechanism on magnesium (0001), (101[combining macron]0), (101[combining macron]1), (112[combining macron]0) and (112[combining macron]1) surface orientations using density functional theory and kinetic Monte Carlo simulations. Workfunctions, surface, adsorption and interaction energies, diffusion barriers and k-rates for diffusion via hopping and exchange mechanisms are studied. The results provide a comprehensive relationship between these properties and morphology evolution. The latter shows strong dependence on the surface orientation, demonstrating the need for all commonly present facets to be studied, instead of focusing only on the most stable surface orientation.

Impact of Structural Polymorphism on Ionic Conductivity in Lithium Copper Pyroborate Li6CuB4O10.

The search for high Li-ion conducting ceramics has regained tremendous interest triggered by the renaissance of the all-solid-state battery. Within this context we herein reveal the impact of structural polymorphism of lithium copper pyroborate Li6CuB4O10 on its ionic conductivity. Using combined in situ synchrotron X-ray and neutron powder diffraction, a structural and synthetic relationship between α- and ß-Li6CuB4O10 could be established and its impact on ionic conductivity evolution was followed using electrochemical impedance spectroscopy. We show that the high temperature form of Li6CuB4O10 exhibits a high Li-ion conductivity (2.7 mS cm-1 at 350 °C) and solve its crystal structure for the first time. Our results emphasize the significant impact of structural phase transitions on ionic conductivity and show possible high Li-ion mobility within borate based compounds.

Fluorinated reduced graphene oxide as a protective layer on the metallic lithium for application in the high energy batteries.

Metallic lithium is considered to be one of the most promising anode materials since it offers high volumetric and gravimetric energy densities when combined with high-voltage or high-capacity cathodes. However, the main impediment to the practical applications of metallic lithium is its unstable solid electrolyte interface (SEI), which results in constant lithium consumption for the formation of fresh SEI, together with lithium dendritic growth during electrochemical cycling. Here we present the electrochemical performance of a fluorinated reduced graphene oxide interlayer (FGI) on the metallic lithium surface, tested in lithium symmetrical cells and in combination with two different cathode materials. The FGI on the metallic lithium exhibit two roles, firstly it acts as a Li-ion conductive layer and electronic insulator and secondly, it effectively suppresses the formation of high surface area lithium (HSAL). An enhanced electrochemical performance of the full cell battery system with two different types of cathodes was shown in the carbonate or in the ether based electrolytes. The presented results indicate a potential application in future secondary Li-metal batteries.

Probing electrochemical reactions in organic cathode materials via in operando infrared spectroscopy.

Organic materials are receiving an increasing amount of attention as electrode materials for future post lithium-ion batteries due to their versatility and sustainability. However, their electrochemical reaction mechanism has seldom been investigated. This is a direct consequence of a lack of straightforward and broadly available analytical techniques. Herein, a straightforward in operando attenuated total reflectance infrared spectroscopy method is developed that allows visualization of changes of all infrared active bands that occur as a consequence of reduction/oxidation processes. In operando infrared spectroscopy is applied to the analysis of three different organic polymer materials in lithium batteries. Moreover, this in operando method is further extended to investigation of redox reaction mechanism of poly(anthraquinonyl sulfide) in a magnesium battery, where a reduction of carbonyl bond is demonstrated as a mechanism of electrochemical activity. Conclusions done by the in operando results are complemented by synthesis of model compound and density functional theory calculation of infrared spectra.

Electrochemical behavior of Bi4B2O9 towards lithium-reversible conversion reactions without nanosizing.

Conversion type materials, in particular metal fluorides, have emerged as attractive candidates for positive electrodes in next generation Li-ion batteries (LIBs). However, their practical use is being hindered by issues related to reversibility and large polarization. To minimize these issues, a few approaches enlisting the anionic network have been considered. We herein report the electrochemical properties of bismuth oxyborate Bi4B2O9 and show that this compound reacts with lithium via a conversion reaction leading to a sustained capacity of 140 mA h g-1 when cycled between 1.7 and 3.5 V vs. Li+/Li0 while having a surprisingly small polarization (∼300 mV) in the presence of solely 5% in weight of a carbon additive. These observations are rationalized in terms of charge transfer kinetics via complementary XRD, HRTEM and NMR measurements. This finding demonstrates that borate based conversion type materials display rapid charge transfer with limited carbon additives, hence offering a new strategy to improve their overall cycling efficiency.

Opportunities and Challenges in the Development of Cathode Materials for Rechargeable Mg Batteries.

Recent years have seen an intense and renewed interest in the Mg battery research, naming Mg-S the ≫Holy Grail≪ battery, and expectations that Mg battery system will be able to compete and surpass Li-ion batteries in a matter of years. Considerable progress has been achieved in the field of Mg electrolytes, where several new electrolytes with improved electrochemical performance and favorable chemical properties (non-corrosive, non-nucleophilic) were synthesized. Development in the field of cathodes remains a bit more elusive, with inorganic, sulfur, and organic cathodes all showing their upsides and downsides. This review highlights the recent progress in the field of Mg battery cathodes, paying a special attention to the performance and comparison of the different types of the cathodes. It also aims to define advantages and key challenges in the development of each type of cathodes and finally specific questions that should be addressed in the future research.