ABSTRACT
Steerable needles have the potential for accurate needle tip placement even when the optimal path to a target tissue is curvilinear, thanks to their ability to steer, which is an essential function to avoid piercing through vital anatomical features. Autonomous path-following controllers for steerable needles have already been studied, however they remain challenging, especially because of the complexities associated to needle localization. In this context, the advent of fiber Bragg Grating (FBG)-inscribed multicore fibers (MCFs) holds promise to overcome these difficulties. OBJECTIVE: In this study, a closed-loop, 3-D path-following controller for steerable needles is presented. METHODS: The control loop is closed via the feedback from FBG-inscribed MCFs embedded within the needle. The nonlinear guidance law, which is a well-known approach for path-following control of aerial vehicles, is used as the basis for the guidance method. To handle needle-tissue interactions, we propose using Active Disturbance Rejection Control (ADRC) because of its robustness within hard-to-model environments. We investigate both linear and nonlinear ADRC, and validate the approach with a Programmable Bevel-tip Steerable Needle (PBN) in both phantom tissue and ex vivo brain, with some of the experiments involving moving targets. RESULTS: The mean, standard deviation, and maximum absolute position errors are observed to be 1.79 mm, 1.04 mm, and 5.84 mm, respectively, for 3-D, 120 mm deep, path-following experiments. CONCLUSION: MCFs with FBGs are a promising technology for autonomous steerable needle navigation, as demonstrated here on PBNs. SIGNIFICANCE: FBGs in MCFs can be used to provide effective feedback in path-following controllers for steerable needles.
Subject(s)
Needles , Robotics , Phantoms, Imaging , Brain , FeedbackABSTRACT
A hybrid continuum robot design is introduced that combines a proximal tendon-actuated section with a distal telescoping section comprised of permanent-magnet spheres actuated using an external magnet. While, individually, each section can approach a point in its workspace from one or at most several orientations, the two-section combination possesses a dexterous workspace. The paper describes kinematic modeling of the hybrid design and provides a description of the dexterous workspace. We present experimental validation which shows that a simplified kinematic model produces tip position mean and maximum errors of 3% and 7% of total robot length, respectively.
ABSTRACT
Mechanics-based models have been developed to describe the shape of tendon-actuated continuum robots. Models have also been developed to describe the shape of concentric tube robots, i.e., nested combinations of precurved superelastic tubes. While an important class of continuum robots used in endoscopic and intracardiac medical applications combines these two designs, existing models do not cover this combination. Tendon-actuated models are limited to a single tube while concentric tube models do not include tendon-produced forces and moments. This paper derives a mechanics-based model for this hybrid design and assesses it using numerical and physical experiments involving a pair of tendon-actuated tubes. It is demonstrated that, similar to concentric tube robots, relative twisting between the tendon-actuated tubes is an important factor in determining overall robot shape.
ABSTRACT
Over the past 10 years, minimally invasive surgery (MIS) has shown significant benefits compared to conventional surgical techniques, with reduced trauma, shorter hospital stays, and shorter patient recovery times. In neurosurgical MIS procedures, inserting a straight tool (e.g. catheter) is common practice in applications ranging from biopsy and laser ablation, to drug delivery and fluid evacuation. How to handle tissue deformation, target migration and access to deep-seated anatomical structures remain an open challenge, affecting both the preoperative planning phase and eventual surgical intervention. Here, we present the first neurosurgical platform in the literature, able to deliver an implantable steerable needle for a range of diagnostic and therapeutic applications, with a short-term focus on localised drug delivery. This work presents the system's architecture and first in vivo deployment with an optimised surgical workflow designed for pre-clinical trials with the ovine model, which demonstrate appropriate function and safe implantation.
