An enantioselective fluorescent probe for detecting arginine and glutamic acids.

Amino acids are important chiral compounds in the human body, and are important basic components that make up the human body and play an important role in the human body. Among them, different enantiomers of an amino acid may have different roles, and different types of amino acids can be interconverted. However, the content of D-amino acids is much lower than that of L-amino acids, which is difficult to be detected. At present, many of the potential roles of D-amino acids, such as the conversion of D-amino acids to each other, have not yet been fully revealed. Hence, we synthesized fluorescent probe (R)-5 by condensation of 1,1'-Bi-2-naphthol (BINOL) and 2-(Aminomethyl)pyridine with Schiff base, which can recognize both D-arginine and D-glutamic acid at low concentrations. Meanwhile, (R)-5 can be applied to paper-based sensors for the detection of arginine and glutamate in living cells and for food amino acid detection.

A Functional Air-Stable Li9.8GeP1.7Sb0.3S11.8I0.2 Superionic Conductor for High-Performance All-Solid-State Lithium Batteries.

Solid-state electrolytes (SSEs) based on sulfides have become a subject of great interest due to their superior Li-ion conductivity, low grain boundary resistance, and adequate mechanical strength. However, they grapple with chemical instability toward moisture hypersensitivity, which decreases their ionic conductivity, leading to more processing requirements. Herein, a Li9.8GeP1.7Sb0.3S11.8I0.2 (LGPSSI) superionic conductor is designed with a Li+ conductivity of 6.6 mS cm-1 and superior air stability based on hard and soft acids and bases (HSAB) theory. The introduction of optimal antimony (Sb) and iodine (I) into the Li10GeP2S12 (LGPS) structure facilitates fast Li-ion migration with low activation energy (Ea) of 20.33 kJ mol-1. The higher air stability of LGPSSI is credited to the strategic substitution of soft acid Sb into (Ge/P)S4 tetrahedral sites, examined by Raman and X-ray photoelectron spectroscopy techniques. Relatively lower acidity of Sb compared to phosphorus (P) realizes a stronger Sb-S bond, minimizing the evolution of toxic H2S (0.1728 cm3 g-1), which is ∼3 times lower than pristine LGPS when LGPSSI is exposed to moist air for 120 min. The NCA//Li-In full cell with a LGPSSI superionic conductor delivered the first discharge capacity of 209.1 mAh g-1 with 86.94% Coulombic efficiency at 0.1 mA cm-2. Furthermore, operating at a current density of 0.3 mA cm-2, LiNbO3@NCA/LGPSSI/Li-In cell demonstrated an exceptional reversible capacity of 117.70 mAh g-1, retaining 92.64% of its original capacity over 100 cycles.

Review of calibration strategies for discrete element model in quasi-static elastic deformation.

This study first reviewed theories of the mechanical response of structures under loading, and the discrete element method provides a route for studying mechanical response including elastic deformation and structure failure. However, the direct acquisition of the microscopic parameters from the governing equations of the discrete element method via experiments encounters challenges. One possible strategy to obtain these microscopic parameters is parameter calibration that are widely used by researchers. Secondly, the governing equations and failure criterion of the discrete element method are summarized, and the microscopic parameters that would be calibrated are pinpointed. Next, the principles of classical calibration methods of discrete element method are explicated in detail, alongside the validation and discussion of their properties. Lastly, this study examined the applicability of calibrated parameters and points out that the size ratio, porosity, maximum radius, and minimum radius of particles should be identical in both the geometric calibration model and that for applications.

Rapid, enantioselective and colorimetric detection of D-arginine.

D-amino acids are of biological significance yet are not clearly understood due to the lack of powerful analytical tools for their identification. Thus, the specific detection of a single enantiomer of a particular amino acid remains a great challenge due to their structural similarity. Here, we report a strategy to incorporate multiple reaction sites on a chiral 1,1'-bi-2,2'-naphthol-based fluorescent probe. It can respond specifically to D-arginine, while producing no response when in contact with all other amino acids. The probe can report arginine's concentration, and enantiomeric configuration and colorimetric studies enable its qualitative determination.

Enhanced Air and Electrochemical Stability of Li7P2.9Ge0.05S10.75O0.1 Electrolytes with High Ionic Conductivity for Thiophosphate-Based All-Solid-State Batteries.

Sulfide solid electrolytes (SSEs) show tremendous potential to realize high-energy-density secondary batteries and offer distinguishing safety features over the traditional liquid-electrolyte-based system. However, their installation is hindered by the air sensitivity and substandard interfacial compatibility with Li-metal anodes. Herein, an aliovalent P5+/Ge4+ and isovalent S2-/O2- cosubstitution strategy increases the σLi+ to 4.77 mS cm-1, which is associated with the lowest activation energy (18.66 kJ mol-1). Impressively, with limited substitution of P/Ge and S/O in Li7P3S11, the derived electrolytes largely suppressed the structural hydrolysis in the air. Furthermore, the Li//Li cell with novel Li7P2.9Ge0.05S10.75O0.1 SSEs realized Li plating/stripping over 100 h at 0.1 mA cm-2/0.1 mAh cm-2 @ RT, with the lowest overpotential at ∼5 mV. Next, ex situ X-ray photoelectron spectroscopy (XPS) quantified the electrochemical decomposition of the Li7P3S11/LiNbO3@NCA interface during cell operation. XPS results confirmed better thermodynamic stability between LiNbO3@NCA and L7P3S11 after GeO2 substitution. Accordingly, the LiNbO3@NCA/Li7P2.9Ge0.05S10.75O0.1/Li-In cell performed remarkably; first discharge capacity, 158.9 mAh g-1; capacity retention, 89%; and Coulombic efficiency, ∼100% after 50 cycles @ 0.064 mA cm-2 and even at 0.3 mA cm-2 versus the first discharge capacity and retention (129.4 mAh g-1 and 75.73%) after 70 cycles @ RT. These remarkable results could be attributable to the excellent σLi+, chemical/electrochemical stability toward LiNbO3@NCA, and meager interfacial resistance, essential for the practical application of sulfide-based batteries.