ABSTRACT
BACKGORUND: The development of vibration-induced finger disorders is likely associated with combined static and dynamic responses of the fingers to vibration exposure. To study the mechanism of the disorders, a new rat-tail model has been established to mimic the finger vibration and pressure exposures. However, the mechanical behavior of the tail during compression needs to be better understood to improve the model and its applications. OBJECTIVE: To investigate the static and time-dependent force responses of the rat tail during compression. METHODS: Compression tests were conducted on Sprague-Dawley cadaver rat tails using a micromechanical system at three deformation velocities and three deformation magnitudes. Contact-width and the time-histories of force and deformation were measured. Additionally, force-relaxation tests were conducted and a Prony series was used to model the force-relaxation behavior of the tail. RESULTS: The rat tails' force-deformation and stiffness-deformation relationships were strongly nonlinear and time-dependent. Force/stiffness increased with an increase in deformation and deformation velocity. The time-dependent force-relaxation characteristics of the tails can be well described using a Prony series. CONCULSIONS: We successfully quantified the static and time-dependent force responses of rat tails under compression. The identified mechanical behavior of the tail can help improve the rat-tail model and its applications.
ABSTRACT
BACKGROUND: According to the US Bureau of Labor Statistics, musculoskeletal disorders (MSDs) accounted for 32% of all nonfatal injury and illness cases in 2014 among full-time workers. Our objective was to review and summarize the evidence linking occupational exposures to vibration and awkward posture with MSDs of the shoulder and neck. METHODS: A literature search was conducted using the terms musculoskeletal disorders, vibration, and awkward posture. All types of observational epidemiologic studies, with the exception of case reports, published during 1998-2015 were included. Databases searched were MEDLINE (Ovid), Embase (Ovid), Scopus, Ergonomic Abstracts, NIOSHTIC-2, and Health and Safety Science Abstracts. RESULTS: Occupational exposures to whole-body or hand-arm vibration were significantly associated with or resulted in MSDs of the shoulder and neck. Awkward postures while working were also associated with MSDs in these locations. These findings were consistent across study designs, populations, and countries. CONCLUSION: Occupational exposure to vibration and awkward posture are associated with shoulder and neck MSDs. Longitudinal studies are required to elucidate the mechanisms responsible for these associations, and intervention studies are warranted.
ABSTRACT
Roofers have long suffered from low back disorders (LBDs), which are a primary nonfatal injury in construction. Ergonomic studies have identified several risk factors associated with LBDs in workplaces and developed biomechanical models for general LBD risk assessments. However, these models cannot be directly used for assessments in roof workplaces because they are designed for general tasks without considering roofers' posture variance and effects of working on slanted roof surfaces. This paper examined the relationship between roofing work-related factors and LBD risk among roofers using a laboratory assessment. A pitch-configurable wood platform was built to mimic the rooftop. The maximum trunk flexion angle and normalized electromyography (EMG) signals were measured as indicators using a motion capture system and a skeletal muscle signal recording system under different settings, i.e., different roof slopes, postures, facing directions, and working paces. The results indicated the measured factors with significant effects on the LBD development and revealed unfavorable conditions (e.g., using a stooped posture to work on low-pitch rooftops at a fast pace) where the work on rooftops needs particular attention. Such information is useful for systematic understanding of roofing nonfatal LBD developments among construction professionals and may enable development of interventions and guidelines for reducing the prevalence of LBDs at roofing jobsites.
ABSTRACT
OBJECTIVE: The current study is intended to evaluate the stability of a scissor lift and the performance of various fall-arrest harnesses/lanyards during drop/fall-arrest conditions and to quantify the dynamic loading to the head/ neck caused by fall-arrest forces. BACKGROUND: No data exist that establish the efficacy of fall-arrest systems for use on scissor lifts or the injury potential from the fall incidents using a fall-arrest system. METHOD: The authors developed a multibody dynamic model of the scissor lift and a human lift operator model using ADAMS and LifeMOD Biomechanics Human Modeler. They evaluated lift stability for four fall-arrest system products and quantified biomechanical impacts on operators during drop/fall arrest, using manikin drop tests. Test conditions were constrained to flat surfaces to isolate the effect of manikin-lanyard interaction. RESULTS: The fully extended scissor lift maintained structural and dynamic stability for all manikin drop test conditions. The maximum arrest forces from the harnesses/lanyards were all within the limits of ANSI Z359.1. The dynamic loading in the lower neck during the fall impact reached a level that is typically observed in automobile crash tests, indicating a potential injury risk for vulnerable participants. CONCLUSION: Fall-arrest systems may function as an effective mechanism for fall injury protection for operators of scissor lifts. However, operators may be subjected to significant biomechanical loadings on the lower neck during fall impact. APPLICATION: Results suggest that scissor lifts retain stability under test conditions approximating human falls from predefined distances but injury could occur to vulnerable body structures.
