ABSTRACT
Background: Promising short- and midterm outcomes have been seen after anatomic coracoclavicular ligament reconstruction (ACCR) for chronic acromioclavicular joint (ACJ) injuries. Purpose/Hypothesis: To evaluate long-term outcomes and shoulder-related athletic ability in patients after ACCR for chronic type 3 and 5 ACJ injuries. It was hypothesized that these patients would maintain significant functional improvement and sufficient shoulder-sport ability at a long-term follow-up. Study Design: Case series; Level of evidence, 4. Methods: Included were 19 patients (mean age, 45.9 ± 11.2 years) who underwent ACCR for type 3 or 5 ACJ injuries between January 2003 and August 2014. Functional outcome measures included the American Shoulder and Elbow Surgeons (ASES), Rowe, Constant-Murley, Simple Shoulder Test (SST), and Single Assessment Numeric Evaluation (SANE) scores as well as the visual analog scale (VAS) for pain, which were collected preoperatively and at the final follow-up. Postoperative shoulder-dependent athletic ability was assessed using the Athletic Shoulder Outcome Scoring System (ASOSS). Shoulder activity level was evaluated using the Shoulder Activity Scale (SAS), while the Subjective Patient Outcome for Return to Sports (SPORTS) score was collected to assess the patients' ability to return to their preinjury sporting activity. Results: The mean follow-up time was 10.1 ± 3.8 years (range, 6.1-18.8 years). Patients achieved significant pre- to postoperative improvements on the ASES (from 54.2 ± 22.6 to 83.5 ± 23.1), Rowe (from 66.6 ± 18.1 to 85.3 ± 19), Constant-Murley (from 64.6 ± 20.9 to 80.2 ± 22.7), SST (from 7.2 ± 3.4 to 10.5 ± 2.7), SANE (from 30.1 ± 23.2 to 83.6 ± 26.3), and VAS pain scores (from 4.7 ± 2.7 to 1.8 ± 2.8) (P < .001 for all), with no significant differences between type 3 and 5 injuries. At the final follow-up, patients achieved an ASOSS of 80.6 ± 32, SAS level of 11.6 ± 5.1, and SPORTS score of 7.3 ± 4.1, with no significant differences between type 3 and 5 injuries. Four patients (21.1%) had postoperative complications. Conclusion: Patients undergoing ACCR using free tendon allografts for chronic type 3 and 5 ACJ injuries maintained significant improvements in functional outcomes at the long-term follow-up and achieved favorable postoperative shoulder-sport ability, activity, and return to preinjury sports participation.
ABSTRACT
INTRODUCTION: The incidence of reverse shoulder arthroplasty (RTSA) in the United States has increased. Patients under 60 years old with failed rotator cuff repairs or degenerative joint disease with glenoid deformity may be candidates for RTSA and contribute to this increase. The single assessment numeric evaluation (SANE) score is a reliable post-operative scoring technique when compared with other post-operative measures. This study aimed to compare the effect of age on the likelihood of reaching clinically significant SANE scores following RTSA. METHODS: A multicenter retrospective review was performed with a consecutive series of RTSA from December 2015 to September 2021. Patients were stratified into groups based on their age at the time of operation: (1) less than 60 years old, (2) 60-69 years old, (3) 70-79 years old, and (3) greater than 80 years old. The proportions of patients in all cohorts reaching and surpassing clinically significant thresholds at each visit were determined. Likelihood ratios were determined for each age cohort to compare the likelihood of reaching clinically significant SANE scores. RESULTS: A total of 292 of 885 (33%) patients had completed survey data over two years and were included in the study. The 70-79-year-old group was 3.152 (p=.035) times more likely to achieve minimal clinically important difference (MCID) and 2.125 (p=.048) times more likely to achieve patient-acceptable symptomatic state (PASS) compared with patients <60 years old. The cohort who was 80+ years old was also 4.867 (p=.045) times more likely to achieve MCID compared to the <60-year-old cohort. The <60 cohort had the lowest proportion of all patient cohorts achieving MCID. CONCLUSION: A lower proportion of patients younger than 60 years old undergoing RTSA achieved clinically significant post-operative SANE scores. The 70-79-year-old age group was more likely to reach MCID and PASS, and the patients who were 80+ years old were more likely to reach MCID compared to patients younger than 60 years old.
ABSTRACT
BACKGROUND: We aimed to biomechanically evaluate the distal pronator quadratus and compare two locations of distal transection on the strength of the subsequent repair. METHODS: Eighteen fresh-frozen cadaveric specimens were dissected to the pronator quadratus muscle. Specimens were randomly allocated for transection of the pronator quadratus at the myotendinous junction (red group) or parallel to the myotendinous junction at the midsection of the distal tendinous zone (white group). For both groups, repair of the muscle was performed using two figure-of-8 sutures. The radius and ulna were positioned in 90° of wrist extension. The proximal muscular pronator quadratus was fixed in a cryo-clamp. Load-to-failure testing of the repair was performed at 1 mm/s with maximum amount of force applied to the pronator quadratus recorded for each specimen. FINDINGS: The pronator quadratus had a mean width, height, and area of 31.41 ± 5.74 mm, 53.79 ± 7.46 mm, and 1604.27 ± 429.20 mm2 respectively. The pronator quadratus distal tendinous zone had a mean width, height, and area of 29.71 ± 5.83 mm, 12.22 ± 2.79 mm, 282.94 ± 148.30 mm2 respectively. There was no significant difference between the two groups for pronator quadratus height, width, total area, or tendinous zone height, width, or total area. The average load to failure for the white group was significantly higher than that of the red group (29.46 ± 4.24 N vs. 13.78 N ± 6.66 N). INTERPRETATION: Incision and repair of the pronator quadratus in the distal tendinous region is stronger than incision and repair at the red myotendinous junction of the distal PQ.
Subject(s)
Radius Fractures , Wrist Fractures , Humans , Bone Plates , Cadaver , Forearm , Fracture Fixation, Internal , Muscle, Skeletal/surgery , Radius Fractures/surgeryABSTRACT
Background: Failure of a subscapularis repair construct after anatomic total shoulder arthroplasty can result in difficulty with internal rotation and an increased likelihood of dislocation. Although suture tape has been demonstrated to be an efficacious augment for tendonous repairs elsewhere in the body, it has not been investigated as a method for augmenting subscapularis peel repairs. Purpose: To determine the biomechanical efficacy of suture tape augmentation for the repair of a subscapularis peel. Study Design: Controlled laboratory study. Methods: Twelve human cadaveric shoulders underwent a subscapularis peel. Specimens were randomly split into 2 groups: 6 specimens underwent repair using a transosseous bone tunnel technique with 3 high-strength sutures placed with a Mason-Allen configuration (control group), and 6 specimens underwent the control repair using augmentation with 2 suture tapes placed in an inverted mattress fashion and secured to the proximal humerus using a suture anchor (augmentation group). Shoulders underwent biomechanical testing to compare repair displacement with cyclic loading, load at ultimate failure, and construct stiffness. Results: There were no significant between-group differences in displacement after cyclic loading at the superior (P = .87), middle (P = .47), or inferior (P = .77) portions of the subscapularis tendon. Load to failure was significantly greater in the augmentation group (585.1 ± 97.4 N) than in the control group (358.5 ± 81.8 N) (P = .001). Stiffness was also greater in the augmentation group (71.8 ± 13.7 N/mm) when compared with the control group (48.7 ± 5.7 N/mm) (P = .003). Conclusion: Subscapularis peel repair with augmentation via 2 inverted mattress suture tapes secured with an anchor in the proximal humerus conferred significantly greater load at ultimate failure and construct stiffness when compared with a traditional repair using 3 Mason-Allen sutures. There was no difference in repair displacement with cyclic loading between the repair groups. Clinical Relevance: Suture tape augmentation of subscapularis peel repairs after shoulder arthroplasty provides an effective segment to the strength of the repair.
ABSTRACT
Background: A Substantial Clinical Benefit (SCB) value is the amount of change in a patient-reported outcome measure required for a patient to feel they significantly improved from an intervention. Previously published SCB values are often cited by researchers when publishing outcomes data. Where these SCB values are set can have a large impact on the conclusions drawn from a study citing them. As such, the goal of this study was to determine the generalizability of SCB values for a procedure when stratified by time from surgery and geographic region. Methods: A nationwide outcomes database was utilized to obtain preoperative, one-year, and two-year postoperative outcome measurements for patients who underwent anatomic total shoulder arthroplasty (TSA) or reverse TSA. The data were divided into three geographic regions: the South, the Midwest, and the West. An East region was not included due to its limited number of patients. SCB values were calculated for four outcomes measures: Single Assessment Numeric Evaluation score, American Shoulder Elbow Surgeons score, Visual Analog Scale, and Western Ontario Osteoarthritis of the Shoulder score. SCB values were calculated for each region, for each procedure, and at both one and two years postoperatively. To determine the variability of potential SCBs within each region, simulated datasets were created to determine a distribution of possible calculated SCBs. Results: A total of 380 anatomic TSA patients and 543 reverse TSA patients were included for analysis. There was a high degree of variability of SCB values when stratified by procedure, time, and region. While some simulated datasets did produce homogenous SCB distributions among regions, some outcome measures demonstrated a large heterogeneity in distribution among regions, with concomitant large distributions of values within individual regions. Conclusions: There is notable heterogeneity of SCB values when stratified by region or time. The current method of citing previously published SCB values for determining the efficacy of an intervention may be inappropriate. It is likely that this variability holds true in other areas of orthopedics.
ABSTRACT
Background: Despite advances in surgical management of acromioclavicular (AC) joint reconstruction, many patients fail to maintain sustained anatomic reduction postoperatively. Purpose: To determine the biomechanical support of the deltoid and trapezius on AC joint stability, focusing on the rotational stability provided by the muscles to posterior and anterior clavicular rotation. A novel technique was attempted to repair the deltoid and trapezius anatomically. Study Design: Controlled laboratory study. Methods: Twelve human cadaveric shoulders (mean ± SD age, 60.25 ± 10.25 years) underwent servohydraulic testing. Shoulders were randomly assigned to undergo serial defects to either the deltoid or trapezius surrounding the AC joint capsule, followed by a combined deltotrapezial muscle defect. Deltotrapezial defects were repaired with an all-suture anchor using an anatomic technique. The torque (N·m) required to rotate the clavicle 20° anterior and 20° posterior was recorded for the following conditions: intact (native), deltoid defect, trapezius defect, combined deltotrapezial defect, and repair. Results: When compared with the native condition, the deltoid defect decreased the torque required to rotate the clavicle 20° posteriorly by 7.1% (P = .206) and 20° anteriorly by 6.1% (P = .002); the trapezial defect decreased the amount of rotational torque posteriorly by 5.3% (P = .079) and anteriorly by 4.9% (P = .032); and the combined deltotrapezial defect decreased the amount of rotational torque posteriorly by 9.9% (P = .002) and anteriorly by 9.4% (P < .001). Anatomic deltotrapezial repair increased posterior rotational torque by 5.3% posteriorly as compared with the combined deltotrapezial defect (P = .001) but failed to increase anterior rotational torque (P > .999). The rotational torque of the repair was significantly lower than the native joint in the posterior (P = .017) and anterior (P < .001) directions. Conclusion: This study demonstrated that the deltoid and trapezius play a role in clavicular rotational stabilization. The proposed anatomic repair improved posterior rotational stability but did not improve anterior rotational stability as compared with the combined deltotrapezial defect; however, neither was restored to native stability. Clinical Relevance: Traumatic or iatrogenic damage to the deltotrapezial fascia and the inability to restore anatomic deltotrapezial attachments to the acromioclavicular joint may contribute to rotational instability. Limiting damage and improving the repair of these muscles should be a consideration during AC reconstruction.
ABSTRACT
BACKGROUND: Loss of initial reduction of the acromioclavicular joint after coracoclavicular (CC) ligament reconstruction remains a challenge for various repair techniques. Previous studies using polydioxanone suture cerclage augments for CC ligament reconstruction demonstrated poor clinical and biomechanical outcomes. Tape-style sutures have recently gained popularity because of their added stiffness and strength relative to traditional sutures. These tape cerclage systems have yet to be biomechanically studied in CC ligament reconstruction. PURPOSE: To determine the efficacy of a tape cerclage system as an augment to CC ligament reconstruction. STUDY DESIGN: Controlled laboratory study. METHODS: A total of 24 human cadaveric shoulders were utilized. These were divided into 4 repair groups: anatomic CC ligament reconstruction (ACCR), ACCR with a tape cerclage augment (ACCR + C), tendon graft sling with a cerclage augment (TGS + C), or tape cerclage sling alone (CS). The repairs underwent superior/inferior cyclic loading to evaluate for displacement. Specimens were visually inspected for cortical erosion by the tape cerclage after cyclic loading. Finally, the constructs underwent superior plane load-to-failure testing. RESULTS: Less displacement after cyclic loading was observed in the ACCR + C (mean ± SD, 0.42 ± 0.32 mm), TGS + C (0.92 ± 0.42 mm), and CS (0.93 ± 0.39 mm) groups as compared with the ACCR group (4.42 ± 3.40 mm; P = .002). ACCR + C (813.3 ± 257.5 N), TGS + C (558.0 ± 120.7 N), and CS (759.5 ± 173.7 N) demonstrated significantly greater load at failure relative to ACCR (329.2 ± 118.2 N) (P < .001). ACCR + C (60.88 ± 17.3 N/mm), TGS + C (44.97 ± 9.15 N/mm), and CS (54.52 ± 14.24 N/mm) conferred greater stiffness than ACCR (27.43 ± 6.94 N/mm) (P = .001). No cortical erosion was demonstrated in any specimen after cyclic loading. CONCLUSION: In a cadaveric model at time zero, repairs utilizing a tape cerclage system confer significantly greater load to failure and stiffness, as well as decreased displacement with cyclic loading, when compared with traditional ACCR repair. CLINICAL RELEVANCE: Tape cerclage augmentation may provide a useful augment for CC ligament reconstruction.
Subject(s)
Acromioclavicular Joint , Humans , Acromioclavicular Joint/surgery , Biomechanical Phenomena , Cadaver , Suture Techniques , Ligaments, Articular/surgeryABSTRACT
BACKGROUND: Subscapularis failure is a troublesome complication following anatomic total shoulder arthroplasty (aTSA). Commonly discarded during aTSA, the long head of the biceps tendon (LHBT) may offer an efficient and cheap autograft for the augmentation of the subscapularis repair during aTSA. The purpose of this study was to biomechanically compare a standard subscapularis peel repair to 2 methods of subscapularis peel repair augmented with LHBT. METHODS: 18 human cadaveric shoulders (61 ± 9 years of age) were used in this study. Shoulders were randomly assigned to biomechanically compare subscapularis peel repair with (1) traditional single-row repair, (2) single row with horizontal LHBT augmentation, or (3) single row with V-shaped LHBT augmentation. Shoulders underwent biomechanical testing on a servohydraulic testing system to compare cyclic displacement, load to failure, and stiffness. RESULTS: There were no significant differences in the cyclic displacement between the 3 techniques in the superior, middle, or inferior portion of the subscapularis repair (P > .05). The horizontal (436.7 ± 113.3 N; P = .011) and V-shape (563.3 ± 101.0 N; P < .001) repair demonstrated significantly greater load to failure compared with traditional repair (344.4 ± 82.4 N). The V-shape repair had significantly greater load to failure compared to the horizontal repair (P < .001). The horizontal (61.6 ± 8.4 N/mm; P < .001) and the V-shape (62.8 ± 6.1; P < .001) repairs demonstrated significantly greater stiffness compared to the traditional repair (47.6 ± 6.2 N). There was no significant difference in the stiffness of the horizontal and V-shape repairs (P = .770). CONCLUSIONS: Subscapularis peel repair augmentation with LHBT autograft following aTSA confers greater time zero load to failure and stiffness when compared to a standard subscapularis peel repair.
Subject(s)
Arthroplasty, Replacement, Shoulder , Shoulder Joint , Humans , Arthroplasty, Replacement, Shoulder/methods , Biomechanical Phenomena , Cadaver , Rotator Cuff/surgery , Shoulder Joint/surgery , Suture Techniques , Tendons/surgeryABSTRACT
PURPOSE: Despite their clinical importance in maintaining the stability of the pinch mechanism, injuries of the radial collateral ligament (RCL) of the index finger may be underrecognized and underreported. The purpose of this biomechanical study was to compare the repair of index finger RCL tears with either a standard suture anchor or suture tape augmentation. METHODS: The index fingers from 24 fresh-frozen human cadavers underwent repair of torn RCLs using either a standard suture anchor or suture tape augmentation. Following the repairs, the initial displacement of the repair with a 3-N ulnar deviating load was evaluated. Next, the change in displacement (cyclic deformation) of the repair after 1,000 cycles of 3 N of ulnar deviating force was calculated (displacement of the 1000th cycle - displacement of the first cycle). Finally, the amount of force required to cause clinical failure (30° ulnar deviation) of the repair was determined. RESULTS: Suture tape augmentation repairs displayed significantly less cyclic deformation (0.8 ± 0.5 mm) after cyclic loading than suture anchor repairs (1.8 ± 0.7 mm). There was no significant difference in the force required to cause the clinical failure of the repairs between the suture tape (35.1 ± 18.1 N) and suture anchor (24.5 ± 9.2 N) repairs. CONCLUSIONS: Index finger RCL repair with suture tape augmentation results in decreased deformation with repetitive motion compared with RCL repair alone. CLINICAL RELEVANCE: Suture tape augmentation may allow for early mobilization following index finger RCL repair by acting as a brace that protects the repaired ligament from deforming forces.
ABSTRACT
OBJECTIVES: Beginning January 1, 2021 total shoulder arthroplasty (TSA) was removed from the Medicare (U.S national healthcare for patients ≥ 65years of age) inpatient-only list. Furthermore, there is limited data comparing outpatient and inpatient TSA among recent contemporary large population databases. This study aimed to analyze shoulder arthroplasty outcomes between inpatient and outpatient procedures at the national level. METHODS: The American College of Surgeons National Surgical Quality Improvement Program (ACS-NSQIP) database was utilized (2015-2019). Cases with a current procedural terminology of 23472 indicative of primary TSA and reverse total shoulder arthroplasty were included (N = 22,452). Outcomes were then analyzed in two approaches: unmatched analysis and propensity score matched risk-adjusted analysis. RESULTS: Overall, 9.7% (N = 2,185) of cases were performed outpatient and 90.3% (N = 20,357) of cases were performed inpatient. The rate of outpatient procedures has been steadily increasing (2015: 8.3%, 2016: 14.7%, 2017: 15.8%, 2018: 26.5%, 2019: 34.6%; P < 0.001). Outpatients were more likely to be male (50.7% vs. 43.7%) and younger (age < 65; 37.0% vs. 27.9%) and less likely to be ASA class 3 or 4 (49.5% vs. 58.3%). Outpatients had fewer comorbidities including obesity (46.1% vs. 51.9%), hypertension (60.5% vs. 67.4%), diabetes (15.1 vs. 18.2%), chronic obstructive pulmonary disease (4.8% vs. 7.0%), bleeding disorders (1.3% vs. 2.5%), or chronic steroid use (3.5% vs. 5.0%; all P < 0.001). In a non-risk matched analysis of outcomes, outpatient procedures displayed lower rates of any adverse event (3.5% vs. 5.3%; P < 0.001), minor adverse events (1.5% vs. 3.0%; P = 0.001), and readmission (2.2% vs. 2.8%; P = 0.025). Following a propensity score matched analysis, two risk matched cohorts of outpatient (N = 2,172) and inpatient (N = 2,172) procedures were identified. Subsequent analysis of outcomes revealed no significant differences in outcome metrics between risk-matched outpatient and inpatient procedures. CONCLUSIONS: From 2015 to 2019, there has been a four-fold increase in the proportion of outpatient shoulder arthroplasty cases in the ACS-NSQIP database. This study shows that outpatient shoulder arthroplasty may be safely performed in a select cohort of patients without increased risk of adverse events. After adjusting for comorbidities, there were no differences in clinical outcomes or rates of adverse outcomes between inpatient and outpatient shoulder arthroplasty. LEVEL OF EVIDENCE: Retrospective Observational Study, Level IV.
Subject(s)
Arthroplasty, Replacement, Shoulder , Outpatients , Aged , Arthroplasty, Replacement, Shoulder/adverse effects , Female , Humans , Inpatients , Male , Medicare , Patient Readmission , Postoperative Complications/epidemiology , Propensity Score , United States/epidemiologyABSTRACT
Introduction: Traumatic shoulder dislocations in elderly patients can result in significant shoulder pathology. Rotator cuff tears and recurrent instability are common complications follow a dislocation event, while axillary nerve injury is less common. While there have been rare cases of recurrent shoulder instability with concomitant axillary nerve injury, there have been no prior cases, in which concurrent fracture fragmentation resulted in the initial gross instability. Case Report: A 68-year-old male with painful gross instability presents following a traumatic dislocation. The patient sustained an axillary nerve injury to the ipsilateral side resulting in a non-functioning deltoid. Pre-operative X-rays showed recurrent chronic glenohumeral dislocation, computerized tomography imaging showed a greater tuberosity fracture, and magnetic resonance imaging showed a massive cuff tear with retraction and atrophy. Given the level of instability and deltoid dysfunction, the patient was treated with shoulder arthrodesis. Intraoperatively, a large fragment of greater tuberosity with ligamentous attachments was found adhered to the anterior glenoid. After arthrodesis, the patient's pain and function improved significantly. Conclusion: When treating elderly patients with gross instability following a traumatic dislocation, surgeons should keep in mind the high likelihood of concomitant avulsion fracture, and that migratory cortical fragments can be a nidus for a patient's instability. When selected for appropriately, these patients can be effectively treated with shoulder arthrodesis with excellent improvements of pain and functionality.