Iron, Tungsten Dual-Doped Nickel Sulfide as Efficient Bifunctional Catalyst for Overall Water Splitting.

Developing low-cost and highly efficient bifunctional catalysts for both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER) is a challenging problem in electrochemical overall water splitting. Here, iron, tungsten dual-doped nickel sulfide catalyst (Fe/W-Ni3S2) is synthesized on the nickel foam, and it exhibits excellent OER and HER performance. As a result, the water electrolyze based on Fe/W-Ni3S2 bifunctional catalyst illustrates 10 mA cm-2 at 1.69 V (without iR-compensation) and highly durable overall water splitting over 100 h tested under 500 mA cm-2. Experimental results and DFT calculations indicate that the synergistic interaction between Fe doping and Ni vacancy induced by W leaching during the in situ oxidation process can maximize exposed OER active sites on the reconstructed NiOOH species for accelerating OER kinetics, while the Fe/W dual-doping optimizes the electronic structure of Fe/W-Ni3S2 and the binding strength of intermediates for boosting HER. This study unlocks the different promoting mechanisms of incorporating Fe and W for boosting the OER and HER activity of Ni3S2 for water splitting, which provides significant guidance for designing high-performance bifunctional catalysts for overall water splitting.

In-situ confining selenium within bubble - like carbon nanoshells for ultra-stable Li-Se batteries.

Lithium-selenium (Li-Se) batteries are promising energy storage devices. However, the long-term durability and high-rate performance of the Se cathode have been limited by significant volume expansion and the troublesome shuttle effect of polyselenides during repeated charging/discharging processes. To revolutionize these issues, we applied a top-down strategy through the in-situ trapping of amorphous Se within bubble-like carbon (BLC) frameworks, which can radically minimize the presence of surface-absorbed Se while enhancing Se loading capacity. This ingenious technique successfully encapsulates all Se species within carbon nanoshells, creating a distinct half-filled core-shell structure known as Se@void@BLC. This in-situ trapping approach ensures the efficient management of Se volume changes during repeated discharge and charge cycles. Moreover, an extraordinary Se loading capacity of up to 65.6 wt% is reached. Using the Se@void@BLC as cathode for Li-Se battery, we achieve a high initial Columbic efficiency of 84.2 %, a high reversible capacity of 585 mAh g-1, and an ultralow capacity decay of only 0.0037 % per cycle during 4000 cycles at 10 A g-1.

Hollow Carbon and MXene Dual-Reinforced MoS2 with Enlarged Interlayers for High-Rate and High-Capacity Sodium Storage Systems.

Sodium-ion batteries (SIBs) and sodium-ion capacitors (SICs) are promising candidates for cost-effective and large-scale energy storage devices. However, sluggish kinetics and low capacity of traditional anode materials inhibit their practical applications. Herein, a novel design featuring a layer-expanded MoS2 is presented that dual-reinforced by hollow N, P-codoped carbon as the inner supporter and surface groups abundant MXene as the outer supporter, resulting in a cross-linked robust composite (NPC@MoS2 /MXene). The hollow N, P-codoped carbon effectively prevents agglomeration of MoS2 layers and facilitates shorter distances between the electrolyte and electrode. The conductive MXene outer surface envelops the NPC@MoS2 units inside, creating interconnected channels that enable efficient charge transfer and diffusion, ensuring rapid kinetics and enhanced electrode utilization. It exhibits a high reversible capacity of 453 mAh g-1 , remarkable cycling stability, and exceptional rate capability with 54% capacity retention when the current density increases from 100 to 5000 mA g-1 toward SIBs. The kinetic mechanism studies reveal that the NPC@MoS2 /MXene demonstrates a pseudocapacitance dominated hybrid sodiation/desodiation process. Coupled with active carbon (AC), the NPC@MoS2 /MXene//AC SICs achieve both high energy density of 136 Wh kg-1 at 254 W kg-1 and high-power density of 5940 W kg-1 at 27 Wh g-1 , maintaining excellent stability.

Enabling Ultrafine Ru Nanoparticles with Tunable Electronic Structures via a Double-Shell Hollow Interlayer Confinement Strategy toward Enhanced Hydrogen Evolution Reaction Performance.

Engineering of the catalysts' structural stability and electronic structure could enable high-throughput H2 production over electrocatalytic water splitting. Herein, a double-shell interlayer confinement strategy is proposed to modulate the spatial position of Ru nanoparticles in hollow carbon nanoreactors for achieving tunable sizes and electronic structures toward enhanced H2 evolution. Specifically, the Ru can be anchored in either the inner layer (Ru-DSC-I) or the external shell (Ru-DSC-E) of double-shell nanoreactors, and the size of Ru is reduced from 2.2 to 0.9 nm because of the double-shell confinement effect. The electronic structures are efficiently optimized thereby stabilizing active sites and lowering the reaction barrier. According to finite element analysis results, the mesoscale mass diffusion can be promoted in the double-shell configuration. The Ru-DSC-I nanoreactor exhibits a much lower overpotential (η10 = 73.5 mV) and much higher stability (100 mA cm-2). Our work might shed light on the precise design of multishell catalysts with efficient refining electrostructures toward electrosynthesis applications.

Electrolyte and Additive Engineering for Zn Anode Interfacial Regulation in Aqueous Zinc Batteries.

Aqueous Zn-metal batteries (AZMBs) have gained great interest due to their low cost, eco-friendliness, and inherent safety, which serve as a promising complement to the existing metal-based batteries, e.g., lithium-metal batteries and sodium-metal batteries. Although the utilization of aqueous electrolytes and Zn metal anode in AZMBs ensures their improved safety over other metal batteries meanwhile guaranteeing their decent energy density at the cell level, plenty of challenges involved with metallic Zn anode still await to be addressed, including dendrite growth, hydrogen evolution reaction, and zinc corrosion and passivation. In the past years, several attempts have been adopted to address these problems, among which engineering the aqueous electrolytes and additives is regarded as a facile and promising approach. In this review, a comprehensive summary of aqueous electrolytes and electrolyte additives will be given based on the recent literature, aiming at providing a fundamental understanding of the challenges associated with the metallic Zn anode in aqueous electrolytes, meanwhile offering a guideline for the electrolytes and additives engineering strategies toward stable AZMBs in the future.

A quasi-solid polymer electrolyte initiated by two-dimensional functional nanosheets for stable lithium metal batteries.

Lithium-metal batteries (LMBs) are expected to serve as next-generation energy storage systems due to their high theoretical energy density. However, their practical application is largely impeded due to the safety risks that arise from the uncontrollable Li dendrite growth and the high reactivity between high flammability liquid organic electrolytes and metallic lithium. Here, we report a highly safe quasi-solid gel polymer electrolyte (GPE) to achieve stable cycling of lithium metal with high coulombic efficiency, and it is prepared by in situ polymerization of 1,3-dioxolane (DOL) assisted by multi-functional H3Sb3P2O14 sheets. H3Sb3P2O14 acts as an initiator and a functional additive simultaneously that promotes the formation of a stable solid electrolyte interface (SEI) layer, thereby regulating the uniform deposition of Li and improving the Li plating/stripping efficiency. The obtained quasi-solid GPE exhibits high ionic conductivity and enhanced oxidative stability, favoring a stabilized electrode/electrolyte interface. Using the GPE, the electrochemical performance of the quasi-solid-state LMB with a LiFePO4 cathode and a lithium metal anode is significantly improved, delivering a discharge capacity of 125.7 mA h g-1 even after 1000 cycles. Therefore, the high reversibility and remarkable battery cyclability suggest that such a GPE is a promising choice of electrolyte for LMBs, while its facile preparation makes its large-scale application possible in the future.

A 'Moore's law' for fibers enables intelligent fabrics.

Fabrics are an indispensable part of our everyday life. They provide us with protection, offer privacy and form an intimate expression of ourselves through their esthetics. Imparting functionality at the fiber level represents an intriguing path toward innovative fabrics with a hitherto unparalleled functionality and value. The fiber technology based on thermal drawing of a preform, which is identical in its materials and geometry to the final fiber, has emerged as a powerful platform for the production of exquisite fibers with prerequisite composition, geometric complexity and control over feature size. A 'Moore's law' for fibers is emerging, delivering higher forms of function that are important for a broad spectrum of practical applications in healthcare, sports, robotics, space exploration, etc. In this review, we survey progress in thermally drawn fibers and devices, and discuss their relevance to 'smart' fabrics. A new generation of fabrics that can see, hear and speak, sense, communicate, harvest and store energy, as well as store and process data is anticipated. We conclude with a critical analysis of existing challenges and opportunities currently faced by thermally drawn fibers and fabrics that are expected to become sophisticated platforms delivering value-added services for our society.

Edge-hosted Atomic Co-N4 Sites on Hierarchical Porous Carbon for Highly Selective Two-electron Oxygen Reduction Reaction.

Not only high efficiency but also high selectivity of the electrocatalysts is crucial for high-performance, low-cost, and sustainable energy storage applications. Herein, we systematically investigate the edge effect of carbon-supported single-atom catalysts (SACs) on oxygen reduction reaction (ORR) pathways (two-electron (2 e- ) or four-electron (4 e- )) and conclude that the 2 e- -ORR proceeding over the edge-hosted atomic Co-N4 sites is more favorable than the basal-plane-hosted ones. As such, we have successfully synthesized and tuned Co-SACs with different edge-to-bulk ratios. The as-prepared edge-rich Co-N/HPC catalyst exhibits excellent 2 e- -ORR performance with a remarkable selectivity of ≈95 % in a wide potential range. Furthermore, we also find that oxygen functional groups could saturate the graphitic carbon edges under the ORR operation and further promote electrocatalytic performance. These findings on the structure-property relationship in SACs offer a promising direction for large-scale and low-cost electrochemical H2 O2 production via the 2 e- -ORR.

Integrating Covalent Organic Framework with Transition Metal Phosphide for Noble-Metal-Free Visible-Light-Driven Photocatalytic H2 Evolution.

2D covalent organic frameworks (COFs) are considered as one kind of the most promising crystalline porous materials for solar-driven hydrogen production. However, adding noble metal co-catalysts into the COFs-based photocatalytic system is always indispensable. Herein, through a simple solvothermal synthesis method, TpPa-1-COF, a typical 2D COF, which displays a wide light absorption region, is rationally combined with transition metal phosphides (TMPs) to fabricate three TMPs/TpPa-1-COF hybrid materials, named Ni12 P5 (Ni2 P or CoP)/TpPa-1-COF. The incorporated TMPs can be served as electron collectors for accelerating the transfer of charges on TpPa-1-COF, thus the composites are demonstrated to be efficient photocatalysts for promoting water splitting. Benefitting from the richer surface reactive sites and lower H* formation energy barrier, the Ni12 P5 can most effectively improve the photocatalytic performance of the TpPa-1-COF, and the H2 evolution rate can reach up to 31.6 µmol h-1 , approximately 19 times greater than pristine TpPa-1-COF (1.65 µmol h-1 ), and is comparable to the Pt/TpPa-1-COF (38.8 µmol h-1 ). This work is the first example of combining COFs with TMPs to construct efficient photocatalysts, which may offer new insight for constructing noble-metal-free COF-based photocatalysts.

Hetero-Shelled Hollow Structure Coupled with Non-Thermal Plasma Inducing Spatial Charge Rearrangement for Superior NO Conversion and Sulfur Resistance.

Facilitating the mass transfer and spatial charge separation is a great challenge for achieving efficient oxidation of NO and outstanding sulfur resistance. Herein, a hydrothermal-assisted confinement growth technique is used to fabricate well-defined three-dimensional CuOx@MnOx hetero-shelled hollow-structure catalysts. By integrating the coupled plasma space reactor and the porous hierarchical structure of the catalyst, excellent stability (10 h) and high conversion of NO (93.86%) are reached under the concentration of SO2 (1000 mg m-3 ) and NO (200 mg m-3 ). Impressively, precise surface characterization and detailed density functional theory calculations show that the spatial hetero-shelled micro-reactor can orient the redox pairs transportation, facilitating the combination of NO with the surface coordinately unsaturated O atoms, and also prevent the poisoning of SO2 molecules due to the curvature and surface charge effect in the non-thermal plasma equipment.