Assessing petroleum contamination in parts of the Niger Delta based on a sub-catchment delineated field assessment.

The Niger Delta in Nigeria is a complex and heavily contaminated area with over 150,000 interconnected contaminated sites. This intricate issue is compounded by the region's strong hydrological processes and high-energy environment, necessitating a science-based approach for effective contamination assessment and management. This study introduces the concept of sub-catchment contamination assessment and management, providing an overarching perspective rather than addressing each site individually. A description of the sub-catchment delineation process using the digital elevation model data from an impacted area within the Delta is provided. Additionally, the contamination status from the delineated sub-catchment is reported. Sediment, surface water and groundwater samples from the sub-catchment were analyzed for total petroleum hydrocarbons (TPH) and polycyclic aromatic hydrocarbons (PAHs), respectively. Surface sediment TPH concentrations ranged from 129 to 20,600 mg/kg, with subsurface (2-m depth) concentrations from 15.5 to 729 mg/kg. PAHs in surface and subsurface sediment reached 9.55 mg/kg and 0.46 mg/kg, respectively. Surface water exhibited TPH concentrations from 10 to 620 mg/L, while PAHs ranged from below detection limits to 1 mg/L. Groundwater TPH concentrations spanned 3 to 473 mg/L, with total PAHs varying from below detection limits to 0.28 mg/L. These elevated TPH and PAH levels indicate extensive petroleum contamination in the investigated sediment and water environment. Along with severe impacts on large areas of mangroves and wetlands, comparison of TPH and PAH concentrations with sediment and water quality criteria found 54 to 100% of stations demonstrated exceedances, suggesting adverse biological effects on aquatic and sediment biota are likely occurring.

Immobilization effects of co-pyrolyzed neem seed mixed with poultry manure on potentially toxic elements in soil and the phytoremediation potentials of native Manihot esculenta and Jatropha curcas in ensuring sustainable land use.

This study evaluated the effects of neem seed biochar, poultry manure, and their combinations at varying rates of 15 and 25% (w/w) on potentially toxic elements (PTEs) in soils. Afterward, the suitability of Manihot esculenta and Jatropha curcas in removing Cd, As, Zn, Pb, and Hg from mine spoils were appraised in a 270-day outdoor pot experiment. Using ICP-Mass Spectrometry, the elemental contents of target PTE in the shoot, root, and soil specimens were determined for each treatment. The obtained average values were further subjected to a nonparametric test of samples using IBM SPSS Statistic 29. The applied organic amendments resulted in significant differences p < 0.05 in PTE availability for plant uptake after the Independent-Samples Kruskal-Wallis Test was made. Nonetheless, applying a 25% (w/w) mixture of neem seed biochar and poultry manure was efficient in immobilizing more PTEs in soils which caused lower PTEs presence in plants. Organic amendments further significantly enhanced the fertility of the mine soils leading to about a 6- 25.00% increase in the biomass yield (p < 0.05) of both plants. No significant difference (p > 0.05) was however observed between the phytoremediation potentials of both plants after the Independent-Sample Mann-Whitney U test. Even that, Manihot esculenta was averagely more efficient in PTE uptake than Jatropha curcas. Larger portions of the bioaccumulated PTEs were stored in the roots of both plants leading to high bioconcentration factors of 1.94- 2.47 mg/kg and 1.27- 4.70 mg/kg, respectively, for Jatropha curcas and Manihot esculenta. A transfer factor < 1 was achieved for all PTEs uptake by both plants and indicated their suitability for phytostabilization. Techniques for easy cultivation of root-storing PTEs are required to enhance their large-scale use as their biomass could further be used in clean energy production.

Artisanal gold mine spoil types within a common geological area and their variations in contaminant loads and human health risks.

This study answered the question of whether mine spoils occurring in a common geological location had similarities in their contaminant load and associated health risks. Using inductively coupled plasma mass spectrometry, the total contents of Cd, Pb, As, Hg, Zn, Fe, and Al were determined for 110 digested soil samples obtained from underground rock ore (URS), oxide ore (OXS), and alluvial ore (AVS) mine spoils. Independent sample Kruskal-Wallis test and pairwise comparisons of sources were used to ascertain the variation in elemental load between the mine spoil investigated. The results showed that mine spoil contaminations and their ecological and health risk significantly varied (p < 0.01) from each other and fell in the order OXS > URS > AVS > forest soils because of their geochemistry. Determined enrichment and geo-accumulation indices revealed that OXS and URS sites were severely-extremely polluted with Cd, Hg, and As, while AVS mine spoils were only moderately contaminated by Cd and As contents. Children had the highest tendency for developing noncarcinogenic health defects largely due to toxic contents of As, Cd, and Hg in soil materials near them than adult men and women would after obtaining a hazard index of 73.5 and 67.7 (unitless) at both OXS and URS sites. Mine spoils especially where hard rocks and oxide ores were processed are not fit for agricultural use or human habitation. The restriction of human access and sustainable remediation approaches are required to avert health defects. Even so, area-specific potentially toxic elements must be targeted during soil cleaning due to the significant variations in contaminant load between mined sites.

Assessment and abatement of the eco-risk caused by mine spoils in the dry subtropical climate.

The highly rugged mountainous land topography of the Novorossiysk industrial agglomeration (NW Caucasus, Krasnodar Krai, Russia) and arid climate limit the restoration abilities of disturbed mine lands. Abandoned waste-rock dumps of a marl quarry occupy an area of ca. 150,000 m2 next to the cement plant, residential districts, and a commercial seaport. To assess the eco-risk, topsoil horizons of urban and mine-site Technosols and background Rendzinas were sampled and analyzed; measurements of particulate matter fractions PM1, PM2.5, PM4, and PM10 were conducted throughout the agglomeration. Fugitive dust emission from the unreclaimed marl dumps raises the PM2.5 content in the air by a factor of 2.68 on average. The high sorption capacity of the fine eluvium results in the accumulation of urban emissions by the dust and contributes to the subsequent soil pollution; the Cumulative Pollution Index of pedochemical anomalies reaches the high-risk level over the areas of up to 5 km2. Environmental threats caused by the mine dumps can be assessed more reliably by means of land zoning based on accumulated environmental damage indicators and the debris flow and waterspout risk calculation. To abate the technogenic impact caused by the mine spoils, reclamation actions must be taken including soil stabilization on sensitive sites by application of geosynthetic cover, hydroseeding of the mixture of soil improvers and seeds of herbaceous plants on the slopes, and anti-erosion plantation of cades (Juniperus oxycedrus L.) and smoke trees (Cotinus coggygria Scop.) at subhorizontal surfaces.

Experimental Evaluation of Airlift Performance for Vertical Pumping of Water in Underground Mines.

This paper presents experimental studies on the optimization of air-water flow in an airlift pump. Airlift pumps use compressed gas to verticall transport liquids and slurries. Due to the lack of theoretical equations for designing and predicting flow regimes, experimental investigations must be carried out to find the best condition to operate an airlift pump at high efficiency. We used a new air injection system and different submergence ratios to evaluate the output of a simple pump for vertical displacement of water in an underground mine. The tests were carried out in a new device with 5.64 m height and 10.2 cm circular riser pipe. Three air-jacket pipes, at different gas flows in the range of 0.002-0.09 m3/s were investigated with eight submergence ratios. It was found that with the same air flow rate, the most efficient flow of water was achieved when an air jacket with 3 mm diameter holes was used with a submergence ratio between 0.6 and 0.75. In addition, a comparison of practical results with two theoretical models proposed by other investigators showed that neither was able to accurately predict airlift performance in air-water flow mode. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s10230-021-00807-w.

Este artículo presenta estudios experimentales sobre la optimización del flujo de aire-agua en una bomba airlift. Las bombas airlift utilizan gas comprimido para transportar verticalmente líquidos y lodos. Debido a la falta de ecuaciones teóricas para el diseño y la predicción de los regímenes de flujo, es necesario realizar investigaciones experimentales para encontrar las mejores condiciones de funcionamiento de una bomba airlift con alta eficiencia. Utilizamos un nuevo sistema de inyección de aire y diferentes relaciones de inmersión para evaluar el rendimiento de una bomba sencilla para el desplazamiento vertical de agua en una mina subterránea. Las pruebas se realizaron en un nuevo dispositivo de 5,64 m de altura y con un tubo ascendente circular de 10,2 cm. Se investigaron tres tuberías con camisa de aire, con diferentes caudales de gas en el rango de 0,002­0,09 m3/s y con ocho relaciones de inmersión. Se comprobó que, con el mismo caudal de aire, el flujo de agua más eficaz se conseguía cuando se utilizaba una camisa de aire con orificios de 3 mm de diámetro con una relación de inmersión entre 0,6 y 0,75. Además, la comparación de los resultados prácticos con dos modelos teóricos propuestos por otros investigadores demostró que ninguno de ellos era capaz de predecir con exactitud el rendimiento del transporte aéreo en el modo de flujo aire-agua.

Thermal desorption treatment of petroleum hydrocarbon-contaminated soils of tundra, taiga, and forest steppe landscapes.

The results of field, analytical, and experimental research at a number of production facilities reflect the properties of oil-contaminated soils in 3 landscapes: the permafrost treeless Arctic ecosystem, boreal forest, and temperate-climate grassland-woodland ecotone. Laboratory studies have revealed the concentrations of petroleum hydrocarbons in soils, ranging from medium levels of 2000-3000 mg/kg to critical figures over 5000 mg/kg, being 2-25 times higher than the permissible content of oil products in soils. The experimentally applied thermal effects for the oil products desorption from the soil allowed finding an optimal regime: the treatment temperature from 25 to 250 °C reduces the concentrations to an acceptable value. The conditions are environmentally sound, given that the complete combustion point of humates is ca. 450 °C. The outcomes suggest the eco-friendly solution for soil remediation, preserving the soil fertility in fragile cold environments and in more resilient temperate climates, where revitalized brownfields are essential for food production.

Occupational Respirable Mine Dust and Diesel Particulate Matter Hazard Assessment in an Underground Gold Mine in Ghana.

BACKGROUND: Underground miners can experience occupational health diseases due to exposure to particulate matter hazards. OBJECTIVES: The aim of the present study was to examine occupational exposures of underground miners to dust and diesel particulate matter and to identify exposure groups with high potential to develop associated health effects due to the presence of dust and diesel particulate matter (DPM) hazards in an underground gold mine in Ghana. METHODS: Purposive sampling was employed using gravimetric air samplers over an 8-hour time weighted average period. The National Institute for Occupational Safety and Health (NIOSH) analytical Chapter Q and 5040 were used in determining crystalline silica dust and diesel particulate matter fractions, respectively. Structured questionnaires were administered to gather data on workers' level of awareness to dust and DPM exposures. RESULTS: It was found that 41% of the sampled groups were exposed to higher crystalline silica levels above the (NIOSH) permissible exposure limit (PEL) level of 0.05 mg/m3. For DPM, 49% of these groups had exposures above the Mine Safety and Health Administration (MSHA) PEL level of 160 µg/m3. Among the 94 mine workers who responded to this study, 62% were found to be aware of the presence and hazardous nature of silica dust, 28% had minimal knowledge and the remaining were found to be unaware. CONCLUSIONS: There are varying levels of dust and DPM due to the presence of silica-bearing rocks, the production of diesel fumes and inefficiencies of available mitigation measures. Research carried out over the past decades has found confirmed cases of silicosis and lung cancer due to high dust exposure levels. Rock drillers, blast men and shotcrete operators were found to be exposed to higher levels of dust and diesel particulate matter and are at greater risk of silicosis. PARTICIPANT CONSENT: Obtained. ETHICS APPROVAL: This study was approved by the Ethics Committee of the Kwame Nkrumah University of Science and Technology, Ghana and carried out under full consent of the mining company under study. COMPETING INTERESTS: The authors declare no competing financial interests.

Hydro-geochemical paths of multi-layer groundwater system in coal mining regions - Using multivariate statistics and geochemical modeling approaches.

Groundwater is an important drinking water resource that requires protection in North China. Coal mining industry in the area may influence the water quality evolution. To provide primary characterization of the hydrogeochemical processes and paths that control the water quality evolution, a complex multi-layer groundwater system in a coal mining area is investigated. Multivariate statistical methods involving hierarchical cluster analysis (HCA) and principal component analysis (PCA) are applied, 6 zones and 3 new principal components are classified as major reaction zones and reaction factors. By integrating HCA and PCA with hydrogeochemical correlations analysis, potential phases, reactions and connections between various zones are presented. Carbonates minerals, gypsum, clay minerals as well as atmosphere gases - CO2, H2O and NH3 are recognized as major reactants. Mixtures, evaporation, dissolution/precipitation of minerals and cation exchange are potential reactions. Inverse modeling is finally used, and it verifies the detailed processes and diverse paths. Consequently, 4 major paths are found controlling the variations of groundwater chemical properties. Shallow and deep groundwater is connected primarily by the flow of deep groundwater up through fractures and faults into the shallow aquifers. Mining does not impact the underlying aquifers that represent the most critical groundwater resource. But controls should be taken to block the mixing processes from highly polluted mine water. The paper highlights the complex hydrogeochemical evolution of a multi-layer groundwater system under mining impact, which could be applied to further groundwater quality management in the study area, as well as most of the other coalfields in North China.