Mechanical evaluation of human cadaveric lumbar soft tissues suggests possible physiological stress shielding within musculoskeletal soft tissues by the thoracolumbar fascia.

OBJECTIVE: This study investigates the potential for stress shielding within musculoskeletal soft tissues through analysis of stress distributions between lumbar fascial and muscle tissues via mechanical testing. METHODS: Using a custom apparatus, 51 posterior thoracolumbar fascia (TLF) samples and 18 erector spinae (ES) cadaveric samples underwent tensile testing involving three loading-unloading cycles, followed by loading to 6% strain, to mechanically characterize samples. Parallel tensile testing using 20 pairs of two TLF samples, and seven pairs of TLF and ES samples was then conducted for stress distribution analysis between tissues. P<0.05 was deemed significant. RESULTS: The TLF and ES exhibited an average elastic modulus of 150.9MPa and 0.6MPa, respectively. At 6% strain, parallel testing of the TLF pairs yielded an average tensile stress of 8.4MPa and 1.7MPa (p<0.001) exhibited by the stiffer and less stiff TLF samples, respectively. Similarly, TLF-ES parallel testing resulted in average tensile stresses of 7.1MPa and 0.07MPa of the TLF and ES (p<0.002). CONCLUSION: Results suggest elevated loading towards stiffer TLF samples relative to less stiff TLF and ES samples. In soft tissues affected by LBP, skewed stress distributions may result in the TLF withstanding the majority of stress, yielding cyclical stress shielding that may contribute to and/or promote LBP. SIGNIFICANCE: This novel study demonstrates a potential load allocation bias towards the TLF, laying the foundation for stress shielding within lumbar musculoskeletal soft tissues affected by degenerative musculoskeletal conditions.

Improved DNA Extraction and Amplification Strategy for 16S rRNA Gene Amplicon-Based Microbiome Studies.

Next-generation sequencing technology has driven the rapid advancement of human microbiome studies by enabling community-level sequence profiling of microbiomes. Although all microbiome sequencing methods depend on recovering the DNA from a sample as a first critical step, lysis methods can be a major determinant of microbiome profile bias. Gentle enzyme-based DNA preparation methods preserve DNA quality but can bias the results by failing to open difficult-to-lyse bacteria. Mechanical methods like bead beating can also bias DNA recovery because the mechanical energy required to break tougher cell walls may shear the DNA of the more easily lysed microbes, and shearing can vary depending on the time and intensity of beating, influencing reproducibility. We introduce a non-mechanical, non-enzymatic, novel rapid microbial DNA extraction procedure suitable for 16S rRNA gene-based microbiome profiling applications that eliminates bead beating. The simultaneous application of alkaline, heat, and detergent ('Rapid' protocol) to milligram quantity samples provided consistent representation across the population of difficult and easily lysed bacteria equal to or better than existing protocols, producing sufficient high-quality DNA for full-length 16S rRNA gene PCR. The novel 'Rapid' method was evaluated using mock bacterial communities containing both difficult and easily lysed bacteria. Human fecal sample testing compared the novel Rapid method with a standard Human Microbiome Project (HMP) protocol for samples from lung cancer patients and controls. DNA recovered from both methods was analyzed using 16S rRNA gene sequencing of the V1V3 and V4 regions on the Illumina platform and the V1V9 region on the PacBio platform. Our findings indicate that the 'Rapid' protocol consistently yielded higher levels of Firmicutes species, which reflected the profile of the bacterial community structure more accurately, which was confirmed by mock community evaluation. The novel 'Rapid' DNA lysis protocol reduces population bias common to bead beating and enzymatic lysis methods, presenting opportunities for improved microbial community profiling, combined with the reduction in sample input to 10 milligrams or less, and it enables rapid transfer and simultaneous lysis of 96 samples in a standard plate format. This results in a 20-fold reduction in sample handling time and an overall 2-fold time advantage when compared to widely used commercial methods. We conclude that the novel 'Rapid' DNA extraction protocol offers a reliable alternative for preparing fecal specimens for 16S rRNA gene amplicon sequencing.

Face, content, and construct validity of a novel VR/AR surgical simulator of a minimally invasive spine operation.

Mixed-reality surgical simulators are seen more objective than conventional training. The simulators' utility in training must be established through validation studies. Establish face-, content-, and construct-validity of a novel mixed-reality surgical simulator developed by McGill University, CAE-Healthcare, and DePuy Synthes. This study, approved by a Research Ethics Board, examined a simulated L4-L5 oblique lateral lumbar interbody fusion (OLLIF) scenario. A 5-point Likert scale questionnaire was used. Chi-square test verified validity consensus. Construct validity investigated 276 surgical performance metrics across three groups, using ANOVA, Welch-ANOVA, or Kruskal-Wallis tests. A post-hoc Dunn's test with a Bonferroni correction was used for further analysis on significant metrics. Musculoskeletal Biomechanics Research Lab, McGill University, Montreal, Canada. DePuy Synthes, Johnson & Johnson Family of Companies, research lab. Thirty-four participants were recruited: spine surgeons, fellows, neurosurgical, and orthopedic residents. Only seven surgeons out of the 34 were recruited in a side-by-side cadaver trial, where participants completed an OLLIF surgery first on a cadaver and then immediately on the simulator. Participants were separated a priori into three groups: post-, senior-, and junior-residents. Post-residents rated validity, median > 3, for 13/20 face-validity and 9/25 content-validity statements. Seven face-validity and 12 content-validity statements were rated neutral. Chi-square test indicated agreeability between group responses. Construct validity found eight metrics with significant differences (p < 0.05) between the three groups. Validity was established. Most face-validity statements were positively rated, with few neutrally rated pertaining to the simulation's graphics. Although fewer content-validity statements were validated, most were rated neutral (only four were negatively rated). The findings underscored the importance of using realistic physics-based forces in surgical simulations. Construct validity demonstrated the simulator's capacity to differentiate surgical expertise.

Augmentation of musculoskeletal soft tissue morphology within low back pain patients may suggest the presence of physiological stress shielding: An in vivo study.

INTRODUCTION: The pathomechanism of low back pain (LBP) remains unknown. However, changes to mechanical properties of soft tissues affected by LBP may indicate the presence of stress shielding, which may manifest via tissue remodeling. This study investigates the potential for physiological stress shielding within the lumbar spine by examining differences within lumbar soft tissue morphology between control and LBP subjects. METHODS: Through MRI, the total and functional cross-sectional area (tCSA, fCSA) and fatty infiltration (FI) of the lumbar multifidus (MF), erector spinae (ES), quadratus lumborum (QL), psoas major (PM), and thoracolumbar fascia (TLF) were measured from the L1/L2 to L5/S1 intervertebral disc levels of 69 subjects (36 LBP and 33 control subjects). Statistical analysis was conducted using Mann-Whitney U. P < 0.05 denoted significance. RESULTS: Comparison of male LBP patients and male healthy controls yielded an increase in tCSA and fCSA within the L4/L5 PM (p < 0.01), and the L4/L5 ES (p = 0.02) and PM (p < 0.01), respectively, of LBP patients. Female LBP patients' FI compared to female controls increased within the L1/L2 MF (p = 0.03), L3/L4 MF (p = 0.04) and ES (p = 0.02), and L4/L5 QL (p = 0.01). The L3/L4 TLF also demonstrated an 8% increase in LBP subjects. CONCLUSION: Male patients' results suggest elevated tissue loading during motion yielding hypertrophy in the L4/L5 ES and PM fCSA, and PM tCSA. Female LBP patients' MF, ES, and PM at L3/L4 demonstrating elevated FI coupled with TLF tCSA hypertrophy may suggest irregular stress distributions and lay the foundation for stress shielding within musculoskeletal soft tissues.

Development and evaluation of sex-specific thoracolumbar spine finite element models to study spine biomechanics.

Musculoskeletal disorders and low back pain (LBP) are common global afflictions, with a higher prevalence observed in females. However, the cause of many LBP cases continues to elude researchers. Current approaches seldom consider differences in male and female spines. Thus, this study aimed to compare the load distribution between male and female spines through finite element modeling. Two finite element models of the spine, one male and one female, were developed, inclusive of sex-specific geometry and material properties. The models consisted of the vertebrae, intervertebral discs (IVD), tendons, surrounding spinal muscles, and thoracolumbar fascia and were subjected to loading conditions simulating flexion and extension. Following extensive validation against published literature, intersegmental rotation, IVD stress, and vertebral body stress were evaluated. The female model demonstrated increased magnitudes for rotation and stresses when compared to the male model. Results suggest that the augmented stresses in the female model indicate an increased load distribution throughout the spine compared to the male model. These findings may corroborate the higher prevalence of LBP in females. This study highlights the importance of using patient- and sex-specific models for patient analyses and care.

Numerical investigation of intra-abdominal pressure and spinal load-sharing upon the application of an abdominal belt.

Chronic low back pain patients may experience spinal instability. Abdominal belts (ABs) have been shown to improve spine stability, trunk stiffness, and resiliency to spinal perturbations. However, research on the contributing mechanisms is inconclusive. ABs may increase intra-abdominal pressure (IAP) and reduce paraspinal soft tissue contribution to spine stability without increasing spinal compressive loads. A finite element model (FEM) of the spine inclusive of the T1-S1 vertebrae, intervertebral discs (IVDs), ribcage, pelvis, soft tissues, and abdominal cavity, without active muscle forces was developed. An identical FEM with an AB was developed. Both FEMs underwent trunk flexion. Following validation, the models' intervertebral rotation (IVR), IAP, IVD pressure, and tensile stress in the multifidus (MF), erector spinae (ES), and thoracolumbar fascia (TLF) were compared. The inclusion of an AB resulted in a 3.8 kPa IAP increase, but a decreased average soft tissue tensile stress of 0.28 kPa. The TLF withstood the majority of tension being transferred across the paraspinal soft tissues (>70 %). The average IVR in the AB model decreased by 10 %, with the lumbar spine experiencing the largest reduction. The lumbar IVDs of the AB model likewise showed a 31 % reduction in average IVD pressure. Using an AB improved trunk bending stiffness, primarily in the lumbar spine. Wearing an AB had minimal effect on reducing tensile stress in theES. The skewed stress distribution towards the TLF suggests its large contribution to spine stability and the potential advantage in unloading the structure when wearing an AB, measured herein at8 %.

System identification and simulation of soft tissue force feedback in a spine surgical simulator.

Surgical simulators are being introduced as training modalities for surgeons. This paper aims to evaluate dynamic models used to convey force feedback from puncturing the soft tissue during a spine surgical simulation. The force feedback of the tissue is treated as a dynamic system. This is done by performing classical system identification across a bandwidth of frequencies on a tissue analogue and fitting that behaviour to dynamic viscoelastic models. The models that are tested are an inverted linear model, the Maxwell model, the Kelvin-Boltzmann (KB) model, and a higher-order blackbox (HO) model. Several error metrics such as percent variance accounted for (%VAF) are determined to measure solution accuracy. The force feedback models are programmed into a surgical simulator and tested with study participants who rated them based on how well the identified models match the behaviour of the rubber tissue analogue. The highest %VAF is 82.64% when the tissue is modelled as the HO model. Statistically significant differences (p < 0.05) are found between all model ratings from participants except between the HO model and the KB model. However, the HO model has the highest percentage (37.8%) of participants who rank its performance as the closest to the tissue analogue compared to the other force feedback models. The more accurately the dynamic behaviour resembles the tissue analogue, the higher the model was rated by study participants. This study highlights the importance of utilizing dynamic signals to generate dynamic models of soft tissue for spine surgical simulators.

Biomechanical evaluation of the thoracolumbar spine comparing healthy and irregular thoracic and lumbar curvatures.

BACKGROUND: The geometric alignment of the spine plays an integral role in stability, biomechanical loading, and consequently, pain, and a range of healthy sagittal curvatures has been identified. Spinal biomechanics when sagittal curvature is outside the optimal range remains a debate and may provide insight into the load distribution throughout the spinal column. METHOD: A thoracolumbar spine model (Healthy) was developed. Thoracic and lumbar curvatures were adjusted by 50% to create models with varying sagittal profiles: hypolordotic (HypoL), hyperlordotic (HyperL), hypokyphotic (HypoK), and hyperkyphotic (HyperK). In addition, lumbar spine models were constructed for the former three profiles. The models were subjected to loading conditions simulating flexion and extension. Following validation, intervertebral disc stresses, vertebral body stresses, disc heights, and intersegmental rotations were compared across all models. RESULTS: Overall trends demonstrated that HyperL and HyperK models had a noticeable reduction in disc height and greater vertebral body stresses compared to the Healthy model. In comparison, the HypoL and HypoK models displayed opposite trends. Considering the lumbar models, the HypoL model had reduced disc stresses and flexibility, while the contrary was observed in the HyperL model. Results indicate that the models with excessive curvature may be subjected to greater stress magnitudes, while the straighter spine models may reduce these stresses. CONCLUSIONS: Finite element modeling of spine biomechanics demonstrated that variations in sagittal profiles influence the load distribution and range of motion of the spine. Considering patient-specific sagittal profiles in finite element modeling may provide valuable insight for biomechanical analyses and targeted treatments.

High-resolution microbiome analysis reveals exclusionary Klebsiella species competition in preterm infants at risk for necrotizing enterocolitis.

Intestinal colonization with Klebsiella has been linked to necrotizing enterocolitis (NEC), but methods of analysis usually failed to discriminate Klebsiella species or strains. A novel ~ 2500-base amplicon (StrainID) that spans the 16S and 23S rRNA genes was used to generate amplicon sequence variant (ASV) fingerprints for Klebsiella oxytoca and Klebsiella pneumoniae species complexes (KoSC and KpSC, respectively) and co-occurring fecal bacterial strains from 10 preterm infants with NEC and 20 matched controls. Complementary approaches were used to identify cytotoxin-producing isolates of KoSC. Klebsiella species colonized most preterm infants, were more prevalent in NEC subjects versus controls, and replaced Escherichia in NEC subjects. Single KoSC or KpSC ASV fingerprinted strains dominated the gut microbiota, suggesting exclusionary Klebsiella competition for luminal resources. Enterococcus faecalis was co-dominant with KoSC but present infrequently with KpSC. Cytotoxin-producing KoSC members were identified in most NEC subjects and were less frequent in controls. Few Klebsiella strains were shared between subjects. We conclude that inter-species Klebsiella competition, within an environment of KoSC and E. faecalis cooperation, appears to be an important factor for the development of NEC. Preterm infants seem to acquire Klebsiella primarily through routes other than patient-to-patient transmission.

Examining impact forces during posterior spinal fusion to implement in a novel physics-driven virtual reality surgical simulator.

This study aims to understand the impact forces that surgeons apply to the human spine during a posterior spinal fusion procedure towards the development of a novel spine surgical simulator for training medical residents. The foci of this study are impact forces during graft placement and spinal interbody cage insertion. This study examined the lumbar intervertebral discs of two male cadaveric specimens. Impact forces were collected during graft and spinal cage insertion over multiple levels. An impulse hammer and a camera were used to collect impact forces and displacements, respectively. The results demonstrated a logarithmic relationship between impact forces and cumulative displacement during graft placement. This was also observed between cumulative displacement and number of impacts during spinal cage insertion. A linear relationship was observed for the impact forces and number of impacts during graft placement. Results suggest that surgeons rely on the feedback experienced from impact forces during graft insertion to gauge the amount of graft that was placed in a specific area of the disc. Impact forces during cage insertion provide information about any encountered obstacles. When developing surgical simulators, designing the force feedback system should require modelling these behaviors to effectively impart corresponding skills on a trainee.

Homozygous DBF4 mutation as a cause of severe congenital neutropenia.

BACKGROUND: Severe congenital neutropenia presents with recurrent infections early in life as a result of arrested granulopoiesis. Multiple genetic defects are known to block granulocyte differentiation; however, a genetic cause remains unknown in approximately 40% of cases. OBJECTIVE: We aimed to characterize a patient with severe congenital neutropenia and syndromic features without a genetic diagnosis. METHODS: Whole exome sequencing results were validated using flow cytometry, Western blotting, coimmunoprecipitation, quantitative PCR, cell cycle and proliferation analysis of lymphocytes and fibroblasts and granulocytic differentiation of primary CD34+ and HL-60 cells. RESULTS: We identified a homozygous missense mutation in DBF4 in a patient with mild extra-uterine growth retardation, facial dysmorphism and severe congenital neutropenia. DBF4 is the regulatory subunit of the CDC7 kinase, together known as DBF4-dependent kinase (DDK), the complex essential for DNA replication initiation. The DBF4 variant demonstrated impaired ability to bind CDC7, resulting in decreased DDK-mediated phosphorylation, defective S-phase entry and progression and impaired differentiation of granulocytes associated with activation of the p53-p21 pathway. The introduction of wild-type DBF4 into patient CD34+ cells rescued the promyelocyte differentiation arrest. CONCLUSION: Hypomorphic DBF4 mutation causes autosomal-recessive severe congenital neutropenia with syndromic features.

A Critical Comparison of Comparators Used to Demonstrate Credibility of Physics-Based Numerical Spine Models.

The ability of new medical devices and technology to demonstrate safety and effectiveness, and consequently acquire regulatory approval, has been dependent on benchtop, in vitro, and in vivo evidence and experimentation. Regulatory agencies have recently begun accepting computational models and simulations as credible evidence for virtual clinical trials and medical device development. However, it is crucial that any computational model undergo rigorous verification and validation activities to attain credibility for its context of use before it can be accepted for regulatory submission. Several recently published numerical models of the human spine were considered for their implementation of various comparators as a means of model validation. The comparators used in each published model were examined and classified as either an engineering or natural comparator. Further, a method of scoring the comparators was developed based on guidelines from ASME V&V40 and the draft guidance from the US FDA, and used to evaluate the pertinence of each comparator in model validation. Thus, this review article aimed to score the various comparators used to validate numerical models of the spine in order to examine the comparator's ability to lend credibility towards computational models of the spine for specific contexts of use.

The relationship between clinical examination measures and ultrasound measures of fascia thickness surrounding trunk muscles or lumbar multifidus fatty infiltrations: An exploratory study.

Patients with chronic low back pain (CLBP) exhibit remodelling of the lumbar soft tissues such as muscle fatty infiltrations (MFI) and fibrosis of the lumbar multifidus (LuM) muscles, thickness changes of the thoracolumbar fascia (TLF) and perimuscular connective tissues (PMCT) surrounding the abdominal lateral wall muscles. Rehabilitative ultrasound imaging (RUSI) parameters such as thickness and echogenicity are sensitive to this remodelling. This experimental laboratory study aimed to explore whether these RUSI parameters (LuM echogenicity and fascia thicknesses), hereafter called dependent variables (DV) were linked to independent variables (IV) such as (1) other RUSI parameters (trunk muscle thickness and activation) and (2) physical and psychological measures. RUSI measures, as well as a clinical examination comprising physical tests and psychological questionnaires, were collected from 70 participants with LBP. The following RUSI dependent variables (RUSI-DV), measures of passive tissues were performed bilaterally: (1) LuM echogenicity (MFI/fibrosis) at three vertebral levels (L3/L4, L4/L5 and L5/S1); (2) TLF posterior layer thickness, and (3) PMCT thickness of the fasciae between subcutaneous tissue thickness (STT) and external oblique (PMCTSTT/EO ), between external and internal oblique (PMCTEO/IO ), between IO and transversus abdominis (PMCTIO/TrA ) and between TrA and intra-abdominal content (PMCTTrA/IA ). RUSI measures of trunk muscle's function (thickness and activation), also called measures of active muscle tissues, were considered as independent variables (RUSI-IV), along with physical tests related to lumbar stability (n = 6), motor control deficits (n = 7), trunk muscle endurance (n = 4), physical performance (n = 4), lumbar posture (n = 2), and range of motion (ROM) tests (n = 6). Psychosocial measures included pain catastrophizing, fear-avoidance beliefs, psychological distress, illness perceptions and concepts related to adherence to a home-based exercise programme (physical activity level, self-efficacy, social support, outcome expectations). Six multivariate regression models (forward stepwise selection) were generated, using RUSI-DV measures as dependent variables and RUSI-IV/physical/psychosocial measures as independent variables (predictors). The six multivariate models included three to five predictors, explaining 63% of total LuM echogenicity variance, between 41% and 46% of trunk superficial fasciae variance (TLF, PMCTSTT/EO ) and between 28% and 37% of deeper abdominal wall fasciae variance (PMCTEO/IO , PMCTIO/TrA and PMCTTrA/IA ). These variables were from RUSI-IV (LuM thickness at rest, activation of IO and TrA), body composition (percent fat) and clinical physical examination (lumbar and pelvis flexion ROM, aberrant movements, passive and active straight-leg raise, loaded-reach test) from the biological domain, as well as from the lifestyle (physical activity level during sports), psychological (psychological distress-cognitive subscale, fear-avoidance beliefs during physical activities, self-efficacy to exercise) and social (family support to exercise) domains. Biological, psychological, social and lifestyle factors each accounted for substantial variance in RUSI-passive parameters. These findings are in keeping with a conceptual link between tissue remodelling and factors such as local and systemic inflammation. Possible explanations are discussed, in keeping with the hypothesis-generating nature of this study (exploratory). However, to impact clinical practice, further research is needed to determine if the most plausible predictors of trunk fasciae thickness and LuM fatty infiltrations have an effect on these parameters.

On the Mechanism of the Ionizing Radiation-Induced Degradation and Recycling of Cellulose.

The use of ionizing radiation offers a boundless range of applications for polymer scientists, from inducing crosslinking and/or degradation to grafting a wide variety of monomers onto polymeric chains. This review in particular aims to introduce the field of ionizing radiation as it relates to the degradation and recycling of cellulose and its derivatives. The review discusses the main mechanisms of the radiolytic sessions of the cellulose molecules in the presence and absence of water. During the radiolysis of cellulose, in the absence of water, the primary and secondary electrons from the electron beam, and the photoelectric, Compton effect electrons from gamma radiolysis attack the glycosidic bonds (C-O-C) on the backbone of the cellulose chains. This radiation-induced session results in the formation of alkoxyl radicals and C-centered radicals. In the presence of water, the radiolytically produced hydroxyl radicals (●OH) will abstract hydrogen atoms, leading to the formation of C-centered radicals, which undergo various reactions leading to the backbone session of the cellulose. Based on the structures of the radiolytically produced free radicals in presence and absence of water, covalent grafting of vinyl monomers on the cellulose backbone is inconceivable.

Vacuum curette lumbar discectomy mechanics for use in spine surgical training simulators.

Simulation in surgical training is a growing field and this study aims to understand the force and torque experienced during lumbar spine surgery to design simulator haptic feedback. It was hypothesized that force and torque would differ among lumbar spine levels and the amount of tissue removed by ≥ 7%, which would be detectable to a user. Force and torque profiles were measured during vacuum curette insertion and torsion, respectively, in multiple spinal levels on two cadavers. Multiple tests per level were performed. Linear and torsional resistances of 2.1 ± 1.6 N/mm and 5.6 ± 4.3 N mm/°, respectively, were quantified. Statistically significant differences were found in linear and torsional resistances between all passes through disc tissue (both p = 0.001). Tool depth (p < 0.001) and lumbar level (p < 0.001) impacted torsional resistance while tool speed affected linear resistance (p = 0.022). Average differences in these statistically significant comparisons were ≥ 7% and therefore detectable to a surgeon. The aforementioned factors should be considered when developing haptic force and torque feedback, as they will add to the simulated lumbar discectomy realism. These data can additionally be used inform next generation tool design. Advances in training and tools may help improve future surgeon training.

Face and content validity of analog surgical instruments on a novel physics-driven minimally invasive spinal fusion surgical simulator.

Medical simulators are a modern-day technology that allow clinicians to acquire the skills and knowledge needed to perform complex surgical procedures. Validating these simulators is crucial prior to their integration in surgical training programs. However, surgical simulators are typically validated as a whole, without emphasizing validation of the instruments themselves. The purpose of this study was to design and validate analog surgical instruments for a novel, minimally invasive spinal fusion simulator. The surgical procedure was performed on cadavers and on a surgical simulator by experienced spine surgeons to compare and validate the analog instruments. Observations were made to assess the duration of each task and the participants' interaction with each instrument, judged by finger position and location. Immediately after the completion of the simulator trial, participants completed a questionnaire on a 5-point Likert scale. The duration of each task in the surgical procedure varied between participants and training platforms (cadaver versus simulator), while participants' interaction with the instruments was similar, regardless of the training platform. Questionnaire results yielded an average score of 3.7/5 for the instrument-related questions. Subsequently, face and content validity were established. The results suggest feasibility and value in independently validating the analog instruments used in simulator training.

Development and evaluation of a numerical spine model comprising intra-abdominal pressure for use in assessing physiological changes on abdominal compliance and spinal stability.

BACKGROUND: Abdominal compliance is the "measure of ease of abdominal expansion" and determines whether a patient can withstand high intra-abdominal pressures. Thus, high compliance indicates that the abdomen can expand relatively freely, while low compliance restricts abdominal expansion. The global objective of the present work is to evaluate the effect of physiological changes on abdominal compliance using a comprehensive spine finite element model inclusive of intra-abdominal pressure. METHODS: The effect of changing Young's modulus, abdominal wall thickness, and abdominal radii on abdominal compliance were evaluated. Intra-abdominal pressure and thoracolumbar fascia forces were also evaluated to assess abdominal physiological changes effects on overall static spinal stability. FINDINGS: Results showed that as wall thickness increased, compliance decreased. Similar findings were made with an increase in abdominal radius and Young's modulus. Furthermore, the active reduction in compliance, caused by increased elasticity and abdominal radius, resulted in an increase in spinal supportive forces originating from the thoracolumbar fascia and intra-abdominal pressurization, along with an increase in spine displacement from its original stable position. There was no clear stability trend for the case of changing abdominal wall thickness as fluctuations were present. INTERPRETATION: Investigated mechanics and data trends suggested that dangerously low compliance levels might result from poor abdominal elasticity and thickening fat layers. This led to a direct discussion and recommendations for obesity conditions and laparoscopy applications. Lastly, static spinal stability showed to improve through increasing active abdominal compliance by means of actively engaging abdominal pressure, hence augmenting abdominal active elasticity.

Formulation and exploration of novel, intramuscular pressure based, muscle activation strategies in a spine model.

Optimization models are often devised to assess spinal stability via estimating individual muscle forces. However, neglecting muscles' fluidic behavior remains an approximation due to the role of muscle pressure in force transmission. The purpose of this study was to leverage a validated Finite Element (FE) model of the spine, inclusive of Intra-Muscular Pressure (IMP), to explore muscle activation strategies towards maintaining equilibrium spinal stability. Three conventional strategies governing minimizing muscle effort, minimizing IVD compressive forces, and maintaining stability at all costs were first investigated to explore model's validity. Thereafter, two novel IMP-based strategies were devised and explored, specifically minimizing and maximizing IMP. The model was previously shown valid in light of in vivo and in silico observations with an average discrepancy of 6%. This being the case, the conventional strategies dictated efficacy in muscular activations whilst maintaining an equilibrium stable position, as quantified in the present paper, with a difference of 9.8% from documented data. In addition, the explored novel IMP-based strategies suggested the presence of a threshold individual muscles IMP, approximately 272 mmHg for the longissimus muscle for example, beyond which muscles potentially start to share radial loads with surrounding tissues, whilst limiting the contraction of the underlying muscles. In conclusion, this study theoretically supports the possibility of activation strategies based on muscular pressure, which the developed, verified, and validated FE spine model was leveraged to investigate. The explored novel IMP-based strategies may have significance in informing clinical applications such as motion analysis and functional electrical stimulation of muscles.

Validity and reliability of a novel, non-invasive tool and method to measure intra-abdominal pressure in vivo.

Intra-abdominal hypertension has been recorded in between 20 and 50% of intensive care unit patients, with rates increasing in ventilated patients. This increased intra-abdominal pressure (IAP) can reduce blood flow to vital organs, perpetuating further pressure build-up as organs become unable to drain excess fluids. Measurement of IAP for the diagnosis of intra-abdominal hypertension remains highly invasive, thus, a non-invasive alternative to traditional IAP measurement was developed and validated, herein. Fourteen living participants and 13 cadaveric specimen were tested with this novel device for IAP measurement. Living participant results were compared to published IAP averages, while cadavers were tested against the existing gold standard: intra-vesical pressure (IVP). Intra- and inter-rater reliability in both living and cadaveric tests presented excellent results. Convergent validity against published IAP values was also excellent (in living participants) and moderate (in cadavers), while convergent validity against IVP was inconclusive. These promising results support the interest in further research, particularly with IVP comparisons in living participants.

Pneumatosis Intestinalis of the Colon and Greater Omentum following Small Bowel Resection.

Introduction: Pneumatosis intestinalis (PI) is a condition of gas collection within the bowel wall that can represent either a benign clinical finding or a forerunner to potential gastrointestinal catastrophe. As a potentially sinister discovery typically first detected on radiographic imaging, clinicians need to astutely assess the need for additional urgent medical or surgical management in these patients. Apart from portal venous gas, PI outside of the bowel wall is an extremely rare entity that is poorly described. Hence, it is not necessarily clear if PI outside the bowel wall warrants more aggressive management. Case Presentation. We describe a patient with intermittent abdominal pain who presented with PI of the greater omentum in addition to the right and transverse colon nearly two weeks after small bowel resection. Due to his clinical stability, we elected to closely observe him. His condition completely resolved with conservative management. Discussion. PI in the omentum has not been described in a patient who has survived their underlying pathology. Our patient demonstrated PI radiographically in his right and transverse colon and omentum with complete resolution. We did not have to alter our clinical management because of this unique clinical presentation. Conclusion: This case highlights that pneumatosis intestinalis can extend extraluminally and still be managed conservatively with judicious monitoring in the otherwise stable patient.