ABSTRACT
The recent discovery of high-temperature, high-pressure superconductors, such as hydrides and nickelates, has opened exciting avenues in studying high-temperature superconductivity. The primary superconducting properties of these materials are well characterized by measuring various electrical and magnetic properties, despite the challenges posed by the high-pressure environment. Experimental microscopic insight into the pairing mechanism of these superconductors is even more challenging, due to the lack of direct probes of the superconducting gap structures at high pressure conditions. Here, we have developed a planar tunnel junction technique for diamond anvil cells and present ground-breaking tunneling spectroscopy measurements at megabar pressures. We determined the superconducting gap of elemental sulfur at 160 GPa, a key constituent of the high-temperature superconductor H_{3}S. High quality tunneling spectra indicate that ß-Po phase sulfur is a type II superconductor with a single s-wave gap with a gap value 2Δ(0)=5.6 meV. This technique is compatible with superconducting compounds synthesized in diamond anvil cells and provides insight into the pairing mechanism in novel superconductors under high-pressure conditions.
ABSTRACT
Hydrogels prepared from self-assembled cellulose nanofibrils (CNFs) are widely used in biomedicine, electronics and environmental technology. Their ability to serve as inks for extrusion-based 3D printing is conventionally evaluated by means of rheological tests. A model is developed that describes the response of CNF gels in small- and large-amplitude oscillatory tests in a unified manner. The model involves a reasonably small number of material parameters, ensures good agreement between results of simulation and observations in oscillatory tests and correctly predicts the stress-strain Lissajous curves, experimental data in hysteresis loop tests, and measurements of the steady-state viscosity. The model is applied to analyze how composition and preparation conditions for CNF gels affect transition from shear thinning to weak strain overshoot in large-amplitude shear oscillatory tests. Based on the model, simple relations are derived for the fractal dimension of CNF clusters and the storage modulus of gels prepared in aqueous solutions of multivalent salts. The validity of these equations is confirmed by comparison of their predictions with observations in independent tests.
ABSTRACT
The recent progress in generating static pressures up to terapascal values opens opportunities for studying novel materials with unusual properties, such as metallization of hydrogen and high-temperature superconductivity. However, an evaluation of pressure above ~0.3 terapascal is a challenge. We report a universal high-pressure scale up to ~0.5 terapascal, which is based on the shift of the Raman edge of stressed diamond anvils correlated with the equation of state of Au and does not require an additional pressure sensor. According to the new scale, the pressure values are substantially lower by 20% at ~0.5 terapascal compared to the extrapolation of the existing scales. We compare the available data of H2 at the highest static pressures. We show that the onset of the proposed metallization of molecular hydrogen reported by different groups is consistent when corrected with the new scale and can be compared with various theoretical predictions.
ABSTRACT
Observations are reported in uniaxial tensile tests with various strain rates, tensile relaxation tests with various strains, and tensile creep tests with various stresses on high-density polyethylene (HDPE) at room temperature. Constitutive equations are developed for the viscoelastoplastic response of semicrystalline polymers. The model involves seven material parameters. Four of them are found by fitting observations in relaxation tests, while the others are determined by matching experimental creep curves. The predictive ability of the model is confirmed by comparing observations in independent short- and medium-term creep tests (with the duration up to several days) with the results of numerical analysis. The governing relations are applied to evaluate the lifetime of HDPE under creep conditions. An advantage of the proposed approach is that it predicts the stress-time-to-failure diagrams with account for the creep endurance limit.
ABSTRACT
The equilibrium degree of swelling of thermo-responsive (TR) gels is strongly affected by the presence of ions in an aqueous solution. This phenomenon plays an important role in (i) the synthesis of multi-stimuli-responsive gels for soft robotics, where extraordinary strength and toughness are reached by soaking of a gel in solutions of multivalent ions, and (ii) the preparation of hybrid gels with interpenetrating networks formed by covalently cross-linked synthetic chains and ionically cross-linked biopolymer chains. A model is developed for equilibrium swelling of a TR gel in aqueous solutions of salts at various temperatures T below and above the critical temperature at which collapse of the gel occurs. An advantage of the model is that it involves a a small (compared with conventional relations) number of material constants and allows the critical temperature to be determined explicitly. Its ability (i) to describe equilibrium swelling diagrams on poly(N-isopropylacrylamide) gels in aqueous solutions of mono- and multivalent salts and (ii) to predict the influence of volume fraction of salt on the critical temperature is confirmed by comparison of observations with results of numerical simulation.
Subject(s)
Salts , Water , Biopolymers , Gels , Solutions , TemperatureABSTRACT
Fast-localized electron loss, resulting from interactions with electromagnetic ion cyclotron (EMIC) waves, can produce deepening minima in phase space density (PSD) radial profiles. Here, we perform a statistical analysis of local PSD minima to quantify how readily these are associated with radiation belt depletions. The statistics of PSD minima observed over a year are compared to the Versatile Electron Radiation Belts (VERB) simulations, both including and excluding EMIC waves. The observed minima distribution can only be achieved in the simulation including EMIC waves, indicating their importance in the dynamics of the radiation belts. By analyzing electron flux depletions in conjunction with the observed PSD minima, we show that, in the heart of the outer radiation belt (L* < 5), on average, 53% of multi-MeV electron depletions are associated with PSD minima, demonstrating that fast localized loss by interactions with EMIC waves are a common and crucial process for ultra-relativistic electron populations.
ABSTRACT
Observations are reported on poly(ether ether ketone) (PEEK) in uniaxial tensile tests, relaxation tests and creep tests with various stresses in a wide interval of temperatures ranging from room temperature to 180 °C. Constitutive equations are developed for the thermo-mechanical behavior of PEEK under uniaxial deformation. Adjustable parameters in the governing equations are found by matching the experimental data. Good agreement is demonstrated between the observations and results of numerical simulation. It is shown that the activation energies for the elastoplastic, viscoelastic and viscoelastoplastic responses adopt similar values at temperatures above the glass transition point.
ABSTRACT
Thermo-responsive (TR) gels swell substantially below their volume phase transition temperature Tc and shrink above this temperature. Applications of TR gels in controlled drug delivery and their use as biosensors and temperature-triggered soft actuators require fine tuning of Tc. As the critical temperature is independent of the preparation conditions and molar fractions of monomers and cross-linkers, it is modulated by incorporation of (neutral or ionic) monomers and polymer chains into pre-gel solutions for TR gels. A model is developed for the mechanical response and equilibrium swelling of TR gels. Analytical formulas are derived for the effect of molar fraction of comonomers on the volume phase transition temperature Tc in copolymer gels and gels with semi-interpenetrating networks. Adjustable parameters are found by fitting equilibrium swelling diagrams on poly(N,N-diethylacrylamide) gels. Good agreement is demonstrated between predictions of the model and experimental data.
Subject(s)
Polymers , Gels , Phase Transition , Temperature , Transition TemperatureABSTRACT
BACKGROUND: It was previously demonstrated that decreased cortical venous drainage is a predictive factor of poor clinical outcome in patients with an acute ischemic stroke. The aim of this investigation is to test the hypothesis that the decline in blood flow in medullary veins (MV) on CT angiogram (CTA) of patients with acute ischemic stroke (AIS) can also be predictive of clinical outcome. METHODS: We retrospectively reviewed a database of patients with AIS who were evaluated by multiphase CTA and enrolled individuals with AIS and evidence of occlusion of the intracranial internal carotid artery, the M1 or M2 segment of the middle cerebral artery, or combination of two occlusions. To characterize asymmetry of MV we used similar principle that was previously established for MV on SWI MR-images; asymmetry was defined was presence of 5 or more contrast opacified MV in one hemisphere as compared to the contralateral side. Clinical outcomes were evaluated by mRS in 90 days. The Fisher Exact test was used to examine the significance of the MV asymmetry. Odds ratio and interrater variability were calculated. RESULTS: 66 patients with AIS were included. The presence of asymmetry in MV was associated with the higher frequency of poor clinical outcomes (84.6% vs 50.9%); the OR was 5.3. Interrater agreement in assessment on MV was moderate in our study (κ=0.55). CONCLUSION: This study shows that (a) medullary veins can be reliably assessed on multiphase CTA, (b) in patients with AIS, asymmetric appearance of MV is associated with poor clinical outcome.
Subject(s)
Brain Ischemia/diagnostic imaging , Cerebral Angiography/methods , Cerebral Veins/diagnostic imaging , Computed Tomography Angiography , Medulla Oblongata/blood supply , Stroke/diagnostic imaging , Adult , Aged , Brain Ischemia/physiopathology , Cerebral Veins/physiopathology , Cerebrovascular Circulation , Collateral Circulation , Databases, Factual , Female , Humans , Male , Middle Aged , Predictive Value of Tests , Prognosis , Reproducibility of Results , Retrospective Studies , Stroke/physiopathologyABSTRACT
Two factors play the key role in application of hydrogels as biomedical implants (for example, for replacement of damaged intervertebral discs and repair of spinal cord injuries): their stiffness and strength (measured in tensile tests) and mechanical integrity (estimated under uniaxial compression). Observations show a pronounced difference between the responses of hydrogels under tension and compression (the Young's moduli can differ by two orders of magnitude), which is conventionally referred to as the tension-compression asymmetry (TCA). A constitutive model is developed for the mechanical behavior of hydrogels, where TCA is described within the viscoplasticity theory (plastic flow is treated as sliding of junctions between chains with respect to their reference positions). The governing equations involve five material constants with transparent physical meaning. These quantities are found by fitting stress-strain diagrams under tension and compression on a number of pristine and nanocomposite hydrogels with various kinds of chemical and physical bonds between chains. Good agreement is demonstrated between the experimental data and results of simulation. The influence of volume fraction of nanoparticles, concentration of cross-links, and topology of a polymer network on material parameters is analyzed numerically.
Subject(s)
Hydrogels , Compressive Strength , Computer Simulation , Elastic Modulus , Pressure , Stress, MechanicalABSTRACT
Thermo-responsive (TR) hydrogels with a lower critical solution temperature swell strongly at temperatures below their volume phase transition temperature T c and collapse above T c. Biomedical application of these materials requires tuning the critical temperature in a rather wide interval. A facile method for modulation of T c is to polymerize the basic monomers with hydrophilic or hydrophobic comonomers. Although the effectiveness of this method has been confirmed by experimental data, molar fractions of comonomers necessary for fine tuning of T c in macroscopic gels and microgels are unknown. A simple model is developed for the equilibrium swelling of TR copolymer gels. Its adjustable parameters are found by fitting swelling diagrams on several macro- and microgels with N-isopropylacrylamide as a basic monomer. Good agreement is demonstrated between the experimental swelling curves and results of numerical analysis. An explicit expression is derived for the volume phase transition temperature as a function of molar fraction of comonomers. The ability of this relation to predict the critical temperature is confirmed by comparison with observations.
ABSTRACT
Mechanical and optical properties of thermo-responsive (TR) gels change drastically at their volume phase transition temperature. As the critical temperature is strongly affected by the presence of small amounts of additives in aqueous solutions, TR gels can be employed as sensors for detection and recognition of multiple analytes (from specific ions to hazardous biochemicals to pathogenic proteins) and actuators for biomedical applications. A simplified mean-field model is developed for equilibrium swelling of TR gels in aqueous solutions of additives. Its advantage is that the model involves a relatively small (compared with the conventional approaches) number of material constants and accounts for changes in the thermo-mechanical response at transition from the swollen to collapsed state. The ability of the model to describe experimental swelling diagrams and to predict the influence of additives on the equilibrium degree of swelling and the volume phase transition temperature of TR gels is confirmed by comparison of observations on poly(N-isopropylacrylamide) gel in aqueous solutions of saccharides (glucose, sucrose and galactose) with results of numerical analysis.
ABSTRACT
With the discovery1 of superconductivity at 203 kelvin in H3S, attention returned to conventional superconductors with properties that can be described by the Bardeen-Cooper-Schrieffer and the Migdal-Eliashberg theories. Although these theories predict the possibility of room-temperature superconductivity in metals that have certain favourable properties-such as lattice vibrations at high frequencies-they are not sufficient to guide the design or predict the properties of new superconducting materials. First-principles calculations based on density functional theory have enabled such predictions, and have suggested a new family of superconducting hydrides that possess a clathrate-like structure in which the host atom (calcium, yttrium, lanthanum) is at the centre of a cage formed by hydrogen atoms2-4. For LaH10 and YH10, the onset of superconductivity is predicted to occur at critical temperatures between 240 and 320 kelvin at megabar pressures3-6. Here we report superconductivity with a critical temperature of around 250 kelvin within the [Formula: see text] structure of LaH10 at a pressure of about 170 gigapascals. This is, to our knowledge, the highest critical temperature that has been confirmed so far in a superconducting material. Superconductivity was evidenced by the observation of zero resistance, an isotope effect, and a decrease in critical temperature under an external magnetic field, which suggested an upper critical magnetic field of about 136 tesla at zero temperature. The increase of around 50 kelvin compared with the previous highest critical temperature1 is an encouraging step towards the goal of achieving room-temperature superconductivity in the near future.
ABSTRACT
Ring current electrons (1-100 keV) have received significant attention in recent decades, but many questions regarding their major transport and loss mechanisms remain open. In this study, we use the four-dimensional Versatile Electron Radiation Belt code to model the enhancement of phase space density that occurred during the 17 March 2013 storm. Our model includes global convection, radial diffusion, and scattering into the Earth's atmosphere driven by whistler-mode hiss and chorus waves. We study the sensitivity of the model to the boundary conditions, global electric field, the electric field associated with subauroral polarization streams, electron loss rates, and radial diffusion coefficients. The results of the code are almost insensitive to the model parameters above 4.5 R E R E, which indicates that the general dynamics of the electrons between 4.5 R E and the geostationary orbit can be explained by global convection. We found that the major discrepancies between the model and data can stem from the inaccurate electric field model and uncertainties in lifetimes. We show that additional mechanisms that are responsible for radial transport are required to explain the dynamics of ≥40-keV electrons, and the inclusion of the radial diffusion rates that are typically assumed in radiation belt studies leads to a better agreement with the data. The overall effect of subauroral polarization streams on the electron phase space density profiles seems to be smaller than the uncertainties in other input parameters. This study is an initial step toward understanding the dynamics of these particles inside the geostationary orbit.
ABSTRACT
With the advent of the Heliophysics/Geospace System Observatory (H/GSO), a complement of multi-spacecraft missions and ground-based observatories to study the space environment, data retrieval, analysis, and visualization of space physics data can be daunting. The Space Physics Environment Data Analysis System (SPEDAS), a grass-roots software development platform (www.spedas.org), is now officially supported by NASA Heliophysics as part of its data environment infrastructure. It serves more than a dozen space missions and ground observatories and can integrate the full complement of past and upcoming space physics missions with minimal resources, following clear, simple, and well-proven guidelines. Free, modular and configurable to the needs of individual missions, it works in both command-line (ideal for experienced users) and Graphical User Interface (GUI) mode (reducing the learning curve for first-time users). Both options have "crib-sheets," user-command sequences in ASCII format that can facilitate record-and-repeat actions, especially for complex operations and plotting. Crib-sheets enhance scientific interactions, as users can move rapidly and accurately from exchanges of technical information on data processing to efficient discussions regarding data interpretation and science. SPEDAS can readily query and ingest all International Solar Terrestrial Physics (ISTP)-compatible products from the Space Physics Data Facility (SPDF), enabling access to a vast collection of historic and current mission data. The planned incorporation of Heliophysics Application Programmer's Interface (HAPI) standards will facilitate data ingestion from distributed datasets that adhere to these standards. Although SPEDAS is currently Interactive Data Language (IDL)-based (and interfaces to Java-based tools such as Autoplot), efforts are under-way to expand it further to work with python (first as an interface tool and potentially even receiving an under-the-hood replacement). We review the SPEDAS development history, goals, and current implementation. We explain its "modes of use" with examples geared for users and outline its technical implementation and requirements with software developers in mind. We also describe SPEDAS personnel and software management, interfaces with other organizations, resources and support structure available to the community, and future development plans. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (10.1007/s11214-018-0576-4) contains supplementary material, which is available to authorized users.
ABSTRACT
Application of double-network (DN) gels with dynamic bonds as implants for repair of damaged and degenerate cartilage tissue and their use as synthetic non-degradable scaffolds for growth, proliferation and differentiation of stem cells requires understanding of the mechanical behavior of these materials under cyclic deformation. A constitutive model is developed for the viscoelastic and viscoplastic responses of DN gels with covalent and non-covalent junctions under multi-cycle loading. Viscoelasticity is treated as breakage and reformation of temporary junctions driven by thermal fluctuations. Viscoplasticity is thought of as sliding of permanent junctions with respect to their initial positions in the polymer network. Adjustable parameters in the governing equations are found by fitting observations in tensile loading-unloading tests with various maximum strains and multi-cycle tests with monotonically increasing maximum elongation ratios per cycle on two DN gels with physical junctions formed due to hydrogen bonds and ionic complexation. Numerical analysis demonstrates the ability of the model not only to describe observations correctly, but also to predict the mechanical response in multi-cycle tests with sophisticated deformation programs. Quantitative and qualitative effects of metal-coordination bonds on the mechanical behavior of supramolecular gels are revealed by simulation.
Subject(s)
Biocompatible Materials/chemistry , Hydrogels/chemistry , Mechanical Phenomena , Elasticity , Hydrogen Bonding , Materials Testing , ViscosityABSTRACT
Understanding of wave environments is critical for the understanding of how particles are accelerated and lost in space. This study shows that in the vicinity of Europa and Ganymede, that respectively have induced and internal magnetic fields, chorus wave power is significantly increased. The observed enhancements are persistent and exceed median values of wave activity by up to 6 orders of magnitude for Ganymede. Produced waves may have a pronounced effect on the acceleration and loss of particles in the Jovian magnetosphere and other astrophysical objects. The generated waves are capable of significantly modifying the energetic particle environment, accelerating particles to very high energies, or producing depletions in phase space density. Observations of Jupiter's magnetosphere provide a unique opportunity to observe how objects with an internal magnetic field can interact with particles trapped in magnetic fields of larger scale objects.
ABSTRACT
The discovery of a superconducting phase in sulfur hydride under high pressure with a critical temperature above 200 K has provided fresh impetus to the search for superconductors at ever higher temperatures. Although this systems displays all the hallmarks of superconductivity, the mechanism through which it arises remains to be determined. Here we provide a first optical spectroscopy study of this superconductor. Experimental results for the optical reflectivity of H3S, under hydrostatic pressure of 150 GPa, for several temperatures and over the range 60 to 600 meV of photon energies, are compared with theoretical calculations based on Eliashberg theory. Two significant features stand out: some remarkably strong infrared active phonons at around 160 meV, and a band with a depressed reflectance in the superconducting state in the region from 450 meV to 600 meV. In this energy range H3S becomes more reflecting with increasing temperature, a change that is traced to superconductivity originating from the electron-phonon interaction. The shape, magnitude, and energy dependence of this band at 150 K agrees with our calculations. This provides strong evidence of a conventional mechanism. However, the unusually strong optical phonon suggests a contribution of electronic degrees of freedom.
ABSTRACT
A simplified model is developed for the elastic response of thermo-responsive gels subjected to swelling under an arbitrary deformation with finite strains. The constitutive equations involve five adjustable parameters that are determined by fitting observations in equilibrium water uptake tests and T-jump transient tests on thin gel disks. Two scenarios for water release under heating are revealed by means of numerical simulation. When the final temperature in a T-jump test is below the volume-phase transition temperature, deswelling is characterized by smooth distribution of water molecules and small tensile stresses. When the final temperature exceeds the critical temperature, a gel disk is split into three regions (central part with a high concentration of water molecules and two domains near the boundaries with low water content) separated by sharp interfaces, whose propagation is accompanied by development of large (comparable with the elastic modulus) tensile stresses.