ABSTRACT
The rational design of MoS2/carbon composites have been widely used to improve the lithium storage capability. However, their deep applications remain a big challenge due to the slow electrochemical reaction kinetics of MoS2 and weak bonding between MoS2 and carbon substrates. In this work, anthracite-derived porous carbon (APC) is sequential coated by TiO2 nanoparticles and MoS2 nanosheets via a chemical activation and two-step hydrothermal method, forming the unique APC@TiO2@MoS2 ternary composite. The dynamic analysis, in-situ electrochemical impedance spectroscopy as well as theoretical calculation together demonstrate that this innovative design effectively improves the ion/electron transport behavior and alleviates the large volume expansion during cycles. Furthermore, the introduction of middle TiO2 layer in the composite significantly strengthens the mechanical stability of the entire electrode. As expected, the as-prepared APC@TiO2@MoS2 anode displays a high lithium storage capacity with a reversible capacity of 655.8 mAh g-1 after 150 cycles at 200 mA g-1, and robust cycle stability. Impressively, even at a high current density of 2 A g-1, the electrode maintains a superior reversible capacity of 597.7 mAh g-1 after 1100 cycles. This design highlights a feasibility for the development of low-cost anthracite-derived porous carbon-based electrodes.
ABSTRACT
Two-dimensional (2D) antiferromagnetic (AFM) materials boasting a high Néel temperature (TN), high carrier mobility, and fast spin response under an external field are in great demand for efficient spintronics. Herein, we theoretically present the MoB3 monolayer as an ideal 2D platform for AFM spintronics. The AFM MoB3 monolayer features a symmetry-protected, 4-fold degenerate Dirac nodal line (DNL) at the Fermi level. It demonstrates a high magnetic anisotropy energy of 865 µeV/Mo and an ultrahigh TN of 1050 K, one of the highest recorded for 2D AFMs. Importantly, we reveal the ultrafast demagnetization of AFM MoB3 under laser irradiation, which induces a rapid transition from a DNL semimetallic state to a metallic state on the time scale of hundreds of femtoseconds. This work presents an effective method for designing advanced spintronics using 2D high-temperature DNL semimetals and opens up a new idea for ultrafast modulation of magnetization in topological semimetals.
ABSTRACT
Water splitting is a promising technique for clean hydrogen production. To improve the sluggish hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), the development of efficient bifunctional electrocatalysts for both HER and OER is urgent to approach the scale-up applications of water splitting. Nowadays transition metal oxides (TMOs) are considered as the promising electrocatalysts due to their low cost, structural flexibility and stability, however, their electrocatalytic activities are eager to be improved. Here, we synthesized waxberry-like hydrophilic Co-doped ZnFe2O4 electrocatalysts as bifunctional electrocatalysts for water splitting. Due to the enhanced active sites by electronic structure tuning and modified super-hydrophilic characteristics, the spinel ZFO-Co0.5 electrocatalyst exhibits excellent catalytic activities for both OER and HER. It exhibits a remarkable low OER overpotential of 220 mV at a current density of 10 mA cm-2 and a Tafel slope of 28.2 mV dec-1. Meanwhile, it achieves a low overpotential of 73 mV at a current density of 10 mA cm-2 with the Tafel slope of 87 mV dec-1 for HER. In addition, for water electrolysis device, the electrocatalytic performance of ZFO-Co0.5||ZFO-Co0.5 surpasses that of commercial IrO2||Pt/C. Our work reveals that the hydrophilic morphology regulation combined with metallic doping strategy is a facile and effective approach to synthesize spinel TMOs as excellent bifunctional electrocatalyst for water splitting.
ABSTRACT
Considering the substantial role of ammonia, developing highly efficient electrocatalysts for nitrate-to-ammonia conversion has attracted increasing interest. Herein, we proposed a feasible strategy of p-d orbital hybridization via doping p-block metals in an Ag host, which drastically promotes the performance of nitrate adsorption and disassociation. Typically, a Sn-doped Ag catalyst (SnAg) delivers a maximum Faradaic efficiency (FE) of 95.5 ± 1.85 % for NH3 at -0.4 V vs. RHE and reaches the highest NH3 yield rate to 482.3 ± 14.1 mg h-1 mgcat.-1. In a flow cell, the SnAg catalyst achieves a FE of 90.2 % at an ampere-level current density of 1.1 A cm-2 with an NH3 yield of 78.6 mg h-1 cm-2, during which NH3 can be further extracted to prepare struvite as high-quality fertilizer. A mechanistic study reveals that a strong p-d orbital hybridization effect in SnAg is beneficial for nitrite deoxygenation, a rate-determining step for NH3 synthesis, which as a general principle, can be further extended to Bi- and In-doped Ag catalysts. Moreover, when integrated into a Zn-nitrate battery, such a SnAg cathode contributes to a superior energy density of 639 Wh L-1, high power density of 18.1 mW cm-2, and continuous NH3 production.
ABSTRACT
Alkali ions, major components at the electrode-electrolyte interface, are crucial to modulating reaction activity and selectivity of catalyst materials. However, the underlying mechanism of how the alkali ions catalyze the N2 reduction reaction (NRR) into ammonia remains elusive, posing challenges for experimentalists to select appropriate electrolyte solutions. In this work, by employing a combined experimental and computational approach, we proposed four essential roles of cation ions at Fe electrodes for N2 fixation: (i) promoting NN bond cleavage; (ii) stabilizing NRR intermediates; (iii) suppressing the competing hydrogen evolution reaction (HER); and (iv) modulating the interfacial charge distribution at the electrode-electrolyte interface. For N2 adsorption on an Fe electrode with cation ions, our constrained ab initio molecular dynamic (c-AIMD) results demonstrate a barrierless process, while an extra 0.52 eV barrier requires to be overcome to adsorb N2 for the pure Fe-water interface. For the formation of *NNH species within the N2 reduction process, the calculated free energy barrier is 0.50 eV at the Li+-Fe-water interface. However, the calculated barrier reaches 0.81 eV in pure Fe-water interface. Furthermore, experiments demonstrate a high Faradaic efficiency for ammonia synthesis on a Li+-Fe-water interface, reaching 27.93% at a working potential of -0.3 V vs RHE and pH = 6.8. These results emphasize how alkali metal cations and local reaction environments on the electrode surface play crucial roles in influencing the kinetics of interfacial reactions.
ABSTRACT
Small Cu clusters are excellent candidates for the electrocatalytic reduction of carbon dioxide (CO2RR), and their catalytic performance is expected to be significantly influenced by the interaction between the substrate and cluster. In this study, we systematically investigate the CO2RR for a Cu3 cluster anchored on Janus MoSX (X = Se, Te) substrates using density functional theory calculations. These substrates feature a broken vertical mirror symmetry, which generates spontaneous out-of-plane polarization and offers two distinct polar surfaces to support the Cu3 cluster. Our findings reveal that the CO2RR performance on the Cu3 cluster is strongly influenced by the polarization direction and strength of the MoSX (X = Se, Te) substrates. Notably, the Cu3 cluster supported on the S-terminated MoSTe surface (Cu3(S)@MoSTe) demonstrates the highest CO2RR activity, producing methane. These results underscore the pivotal role of substrate polarization in modulating the binding strength of reactants and reaction intermediates, thereby enhancing the CO2RR efficiency.
ABSTRACT
Methanol is not only a promising liquid hydrogen carrier but also an important feedstock chemical for chemical synthesis. Catalyst design is vital for enabling the reactions to occur under ambient conditions. This study reports a new class of van der Waals heterojunction photocatalyst, which is synthesized by hot-injection method, whereby carbon dots (CDs) are grown in situ on ZnSe nanoplatelets (NPLs), i.e., metal chalcogenide quantum wells. The resultant organic-inorganic hybrid nanoparticles, CD-NPLs, are able to perform methanol dehydrogenation through CH splitting. The heterostructure has enabled light-induced charge transfer from the CDs into the NPLs occurring on a sub-nanosecond timescale, with charges remaining separated across the CD-NPLs heterostructure for longer than 500 ns. This resulted in significantly heightened H2 production rate of 107 µmole·g-1·h-1 and enhanced photocurrent density up to 34 µA cm-2 at 1 V bias potential. EPR and NMR analyses confirmed the occurrence of α-CH splitting and CC coupling. The novel CD-based organic-inorganic semiconductor heterojunction is poised to enable the discovery of a host of new nano-hybrid photocatalysts with full tunability in the band structure, charge transfer, and divergent surface chemistry for guiding photoredox pathways and accelerating reaction rates.
ABSTRACT
Topological defects are widely recognized as effective active sites toward a variety of electrochemical reactions. However, the role of defect curvature is still not fully understood. Herein, carbon nanomaterials with rich topological defect sites of tunable curvature is reported. The curved defective surface is realized by controlling the high-temperature pyrolytic shrinkage process of precursors. Theoretical calculations demonstrate bending the defect sites can change the local electronic structure, promote the charge transfer to key intermediates, and lower the energy barrier for oxygen reduction reaction (ORR). Experimental results convince structural superiority of highly-curved defective sites, with a high kinetic current density of 22.5 mA cm-2 at 0.8 V versus RHE for high-curvature defective carbon (HCDC), ≈18 times that of low-curvature defective carbon (LCDC). Further raising the defect densities in HCDC leads to the dual-regulated products (HCHDC), which exhibit exceptionally outstanding ORR activity in both alkaline and acidic media (half-wave potentials: 0.88 and 0.74 V), outperforming most of the reported metal-free carbon catalysts. This work uncovers the curvature-activity relationship in carbon defect for ORR and provides new guidance to design advanced catalysts via curvature-engineering.
ABSTRACT
The quest for sustainable urea production has directed attention toward electrocatalytic methods that bypass the energy-intensive traditional Haber-Bosch process. This study introduces an approach to urea synthesis through the coreduction of CO2 and NO3- using copper-doped molybdenum diselenide (Cu-MoSe2) with Cu-Mo dual sites as electrocatalysts. The electrocatalytic activity of the Cu-MoSe2 electrode is characterized by a urea yield rate of 1235 µg h-1 mgcat.-1 at -0.7 V versus the reversible hydrogen electrode and a maximum Faradaic efficiency of 23.43% at -0.6 V versus RHE. Besides, a continuous urea production with an enhanced average yield rate of 9145 µg h-1 mgcat.-1 can be achieved in a flow cell. These figures represent a substantial advancement over that of the baseline MoSe2 electrode. Density functional theory (DFT) calculations elucidate that Cu doping accelerates *NO2 deoxygenation and significantly decreases the energy barriers for C-N bond formation. Consequently, Cu-MoSe2 demonstrates a more favorable pathway for urea production, enhancing both the efficiency and feasibility of the process. This study offers valuable insights into electrode design and understanding of the facilitated electrochemical pathways.
ABSTRACT
Nanosheet-based membranes have shown enormous potential for energy-efficient molecular transport and separation applications, but designing these membranes for specific separations remains a great challenge due to the lack of good understanding of fluid transport mechanisms in complex nanochannels. We synthesized reduced MXene/graphene hetero-channel membranes with sub-1-nm pores for experimental measurements and theoretical modeling of their structures and fluid transport rates. Our experiments showed that upon complete rejection of salt and organic dyes, these membranes with subnanometer channels exhibit remarkably high solvent fluxes, and their solvent transport behavior is very different from their homo-structured counterparts. We proposed a subcontinuum flow model that enables accurate prediction of solvent flux in sub-1-nm slit-pore membranes by building a direct relationship between the solvent molecule-channel wall interaction and flux from the confined physical properties of a liquid and the structural parameters of the membranes. This work provides a basis for the rational design of nanosheet-based membranes for advanced separation and emerging nanofluidics.
ABSTRACT
A strong Fermi level pinning (FLP) effect can induce a large Schottky barrier in metal/semiconductor contacts; reducing the Schottky barrier height (SBH) to form an Ohmic contact (OhC) is a critical problem in designing high-performance electronic devices. Herein, we report the interfacial electronic features and efficient modulation of the Schottky contact (ShC) to OhC for MoSi2N4/M3C2 (M = Zn, Cd, Hg) van der Waals heterostructures (vdWHs). We find that the MoSi2N4/M3C2 vdWHs can form a p-type ShC with small SBH with the calculated pinning factor S ≈ 0.8 for MoSi2N4/M3C2 contacts. These results indicate that the FLP effect can be effectively suppressed in MoSi2N4 contact with M3C2. Moreover, the interfacial properties and SBH of MoSi2N4/Zn3C2 vdWHs can be effectively modulated by a perpendicular electric field and biaxial strain. In particular, an efficient OhC can be achieved in MoSi2N4/Zn3C2 vdWHs by applying a positive electric field of 0.5 V/Å and strain of ±8%.
ABSTRACT
Single atomic catalysts have shown great potential in efficiently electro-converting O2 to H2O2 with high selectivity. However, the impact of coordination environment and introduction of extra metallic aggregates on catalytic performance still remains unclear. Herein, first a series of carbon-based catalysts with embedded coupling Ni single atomic sites and corresponding metallic nanoparticles at adjacent geometry is synthesized. Careful performance evaluation reveals NiSA/NiNP-NSCNT catalyst with precisely controlled active centers of synergetic adjacent Ni-N4S single sites and crystalline Ni nanoparticles exhibits a high H2O2 selectivity over 92.7% within a wide potential range (maximum selectivity can reach 98.4%). Theoretical studies uncover that spatially coupling single atomic NiN4S sites with metallic Ni aggregates in close proximity can optimize the adsorption behavior of key intermediates *OOH to achieve a nearly ideal binding strength, which thus affording a kinetically favorable pathway for H2O2 production. This strategy of manipulating the interaction between single atoms and metallic aggregates offers a promising direction to design new high-performance catalysts for practical H2O2 electrosynthesis.
ABSTRACT
Defect-engineered bimetallic oxides exhibit high potential for the electrolysis of small organic molecules. However, the ambiguity in the relationship between the defect density and electrocatalytic performance makes it challenging to control the final products of multi-step multi-electron reactions in such electrocatalytic systems. In this study, controllable kinetics reduction is used to maximize the oxygen vacancy density of a CuâCo oxide nanosheet (CuCo2O4 NS), which is used to catalyze the glycerol electrooxidation reaction (GOR). The CuCo2O4-x NS with the highest oxygen-vacancy density (CuCo2O4-x-2) oxidizes C3 molecules to C1 molecules with selectivity of almost 100% and a Faradaic efficiency of ≈99%, showing the best oxidation performance among all the modified catalysts. Systems with multiple oxygen vacancies in close proximity to each other synergistically facilitate the cleavage of CâC bonds. Density functional theory calculations confirm the ability of closely spaced oxygen vacancies to facilitate charge transfer between the catalyst and several key glycolic-acid (GCA) intermediates of the GOR process, thereby facilitating the decomposition of C2 intermediates to C1 molecules. This study reveals qualitatively in tuning the density of oxygen vacancies for altering the reaction pathway of GOR by the synergistic effects of spatial proximity of high-density oxygen vacancies.
ABSTRACT
Sensitive and selective acetone detection is of great significance in the fields of environmental protection, industrial production, and individual health monitoring from exhaled breath. To achieve this goal, bimetallic Au@Pt core-shell nanospheres (BNSs) functionalized-electrospun ZnFe2O4 nanofibers (ZFO NFs) are prepared in this work. Compared to pure NFs-650 analogue, the ZFO NFs/BNSs-2 sensor exhibits a stronger mean response (3.32 vs 1.84), quicker response/recovery speeds (33 s/28 s vs 54 s/42 s), and lower operating temperature (188 vs 273 °C) toward 0.5 ppm acetone. Note that an experimental detection limit of 30 ppb is achieved, which ranks among the best cases reported thus far. Besides the demonstrated excellent repeatability, humidity-enhanced response, and long-term stability, the selectivity toward acetone is remarkably improved after BNSs functionalization. Through material characterizations and DFT calculations, all these improvements could be attributed to the boosted oxygen vacancies and abundant Schottky junctions between ZFO NFs and BNSs, and the synergistic catalytic effect of BNSs. This work offers an alternative strategy to realize selective subppm acetone under high-humidity conditions catering for the future requirements of noninvasive breath diabetes diagnosis in the field of individual healthcare.
Subject(s)
Acetone , Breath Tests , Gold , Nanofibers , Nanospheres , Platinum , Acetone/analysis , Acetone/chemistry , Nanofibers/chemistry , Gold/chemistry , Breath Tests/methods , Nanospheres/chemistry , Platinum/chemistry , Humans , Limit of Detection , Oxygen/chemistry , Electrochemical Techniques/methodsABSTRACT
Optimizing the local electronic structure of electrocatalysts can effectively lower the energy barrier of electrochemical reactions, thus enhancing the electrocatalytic activity. However, the intrinsic contribution of the electronic effect is still experimentally unclear. In this work, the electron injection-incomplete discharge approach to achieve the electron accumulation (EA) degree on the nickel-iron layered double hydroxide (NiFe LDH) is proposed, to reveal the intrinsic contribution of EA toward oxygen evolution reaction (OER). Such NiFe LDH with EA effect results in only 262 mV overpotential to reach 50 mA cm-2, which is 51 mV-lower compared with pristine NiFe LDH (313 mV), and reduced Tafel slope of 54.8 mV dec-1 than NiFe LDH (107.5 mV dec-1). Spectroscopy characterizations combined with theoretical calculations confirm that the EA near concomitant Vo can induce a narrower energy gap and lower thermodynamic barrier to enhance OER performance. This study clarifies the mechanism of the EA effect on OER activity, providing a direct electronic structure modulation guideline for effective electrocatalyst design.
ABSTRACT
Exploring and designing an efficient S-scheme heterojunction photocatalyst for water splitting are crucial. Herein, we report the interfacial electronics, photoexcited carrier dynamics, and photocatalytic performance for water splitting of the MoSi2N4/SnS2 van der Waals heterojunction under the modulation of an electric field and biaxial strain. Our results show that the MoSi2N4/SnS2 heterojunction has a direct band gap of 0.41 eV and obeys the S-scheme charge transfer mechanism. Further calculations of the photoexcited carrier dynamics demonstrate that the interfacial carrier recombination time is 7.22 ps, which is shorter than the electron (hole) transfer time of 39.5 ps (566 ps). Moreover, under the effect of a positive electric field and tensile strain, the S-scheme MoSi2N4/SnS2 heterojunction exhibits excellent visible-light absorption, satisfactory band-edge potentials, tunable interfacial charge transfer, and spontaneous hydrogen evolution reaction activity. The calculated STH efficiency indicates that a tensile strain of 2% is the most effective means of improving the photocatalytic performance of the S-scheme MoSi2N4/SnS2 heterojunction.
ABSTRACT
The reduction of CO2 into value-added chemicals and fuels has been actively studied as a promising strategy for mitigating carbon dioxide emissions. However, the dilemma for the experimentalist in choosing an appropriate reaction medium and neglecting the effect of solvent ions when using a simple thermochemical model, normally leads to the disagreement between experimental observations and theoretical calculations. In this work, by considering the effects of both the anion and cation, a more realistic CO2 reduction environment at the solid-liquid interface between copper and solvent ions has been systematically studied by using ab initio molecular dynamics and density functional theory. We revealed that the co-occurrence of alkali ions (K+) and halide ions (F-, Cl-, Br-, and I-) in the electric double layer (EDL) can enhance the adsorption of CO2 by more than 0.45 eV compared to that in pure water, and the calculated energy barrier for CO-CO coupling also decreases 0.32 eV in the presence of I ion on a negatively charged copper electrode. The hydrated ions can modulate the distribution of the charge near the solid-liquid interface, which significantly promotes CO2 reduction and meanwhile impedes the hydrogen evolution reaction. Therefore, our work unveils the significant role of halide ions at the electrode-electrolyte interface for promoting CO2 reduction on copper electrode.
ABSTRACT
The release of nitrates into the environment leads to contaminated soil and water that poses a health risk to humans and animals. Due to the transition to renewable energy-based technologies, an electrochemical approach is an emerging option that can selectively produce valuable ammonia from nitrate sources. However, traditional metal-based electrocatalysts often suffer from low nitrate adsorption that reduces NH3 production rates. Here, a Ni-GaOOH-C/Ga electrocatalyst for electrochemical nitrate conversion into NH3 is synthesized via a low energy atmospheric-pressure plasma process that reduces CO2 into highly dispersed activated carbon on dispersed NiâGaOOH particles produced from a liquid metal GaâNi alloy precursor. Nitrate conversion rates of up to 26.3 µg h-1 mg-1 cat are achieved with good stability of up to 20 h. Critically, the presence of carbon centers is central to improved performance where both NiâC and NiOâC interfaces act as NO3- adsorption and reduction centers during the reaction. Density functional theory (DFT) calculations indicate that the NiOâC and NiâC reaction sites reduce the Gibbs free energy required for NO3- reduction to NH3 compared to NiO and Ni. Importantly, catalysts without carbon centers do not produce NH3, emphasizing the unique effects of incorporating carbon nanoparticles into the electrocatalyst.
ABSTRACT
δ-MnO2 is a promising cathode material for aqueous aluminium-ion batteries (AAIBs) for its layered crystalline structure with large interlayer spacing. However, the excellent Al ion storage performance of δ-MnO2 cathode remains elusive due to the frustrating structural collapse during the intercalation of high ionic potential Al ion species. Here, it is discovered that introducing heterogeneous metal dopants with high bond dissociation energy when bonded to oxygen can significantly reinforce the structural stability of δ-MnO2 frameworks. This reinforcement translates to stable cycling properties and high specific capacity in AAIBs. Vanadium-doped δ-MnO2 (V-δ-MnO2) can deliver a high specific capacity of 518 mAh g-1 at 200 mA g-1 with remarkable cycling stability for 400 cycles and improved rate capabilities (468, 339, and 285 mAh g-1 at 0.5, 1, and 2 A g-1, respectively), outperforming other doped δ-MnO2 materials and the reported AAIB cathodes. Theoretical and experimental studies indicate that V doping can substantially improve the cohesive energy of δ-MnO2 lattices, enhance their interaction with Al ion species, and increase electrical conductivity, collectively contributing to high ion storage performance. These findings provide inspiration for the development of high-performance cathodes for battery applications.
ABSTRACT
Developing efficient water-splitting electrocatalysts to accelerate the slow oxygen evolution reaction (OER) kinetics is urgently desired for hydrogen production. Herein, ultralow phosphorus (P)-doped NiFe LDH (NiFePx LDH) with mild compressive strain is synthesized as an efficient OER electrocatalyst. Remarkably, NiFePx LDH with the phosphorus mass ratio of 0.32 wt.% and compressive strain ratio of 2.53% (denoted as NiFeP0.32 LDH) exhibits extraordinary OER activity with an overpotential as low as 210 mV, which is superior to that of commercial IrO2 and other reported P-based OER electrocatalysts. Both experimental performance and density function theory (DFT) calculation demonstrate that the doping of P atoms can generate covalent FeâP coordination bonds and lattice distortion, thus resulting in the consequent depletion of electrons around the Fe active center and the downward shift of the d-band center, which can lead to a weaker adsorption ability of *O intermediate to improve the catalytic performance of NiFeP0.32 LDH for OER. This work provides novel insights into the distinctive coordinated configuration of P in NiFePx LDH, which can result in superior catalytic performance for OER.