Electrically tunable dual polarization states of light using lithium niobate-based nanograting.

Tuning polarization states of light electrically has unique advantages in the integration of optoelectronic devices. Here, a lithium niobate-based nanograting is proposed to dynamically tune the polarization state of both the reflected and transmitted lights simultaneously in the near-infrared range. By judiciously designing the nanograting, a quasi-bound state in the continuum (qBIC) is excited under the excitation of an obliquely incident plane wave. The excited mode with a high quality-factor and enhanced local electric field can respond to a refractive index change in nanograting structures as small as 10-4 level, which can be generated with a low external voltage via the electro-optic effect. As a result, both the polarization states of reflected and transmitted lights can be dynamically tuned from a right circular polarization to a linear polarization state. The proposed lithium niobate-based nanograting for tuning dual polarization states of light with a qBIC mode suggests a promising electrical scheme for achieving high speed optoelectronic devices.

Plasmonic Functionality of Optical Fiber Tips: Mechanisms, Fabrications, and Applications.

Optical fiber tips with the flat end-facets functionalized take the special advantages of easy fabrication, compactness, and ready-integration among the community of optical fiber devices. Combined with plasmonic structures, the fiber tips draw a significant growth of interest addressing diverse functions. This review aims to present and summarize the plasmonic functionality of optical fiber tips with the current state of the art. Firstly, the mechanisms of plasmonic phenomena are introduced in order to illustrate the tip-compatible plasmonic nanostructures. Then, the strategies of plasmonic functionalities on fiber tips are analyzed and compared. Moreover, the classical applications of plasmonic fiber tips are reviewed. Finally, the challenges and prospects for future opportunities are discussed.

Disruption of T-box transcription factor eomesa results in abnormal development of median fins in Oujiang color common carp Cyprinus carpio.

Median fins are thought to be ancestors of paired fins which in turn give rise to limbs in tetrapods. However, the developmental mechanisms of median fins remain largely unknown. Nonsense mutation of the T-box transcription factor eomesa in zebrafish results in a phenotype without dorsal fin. Compared to zebrafish, the common carp undergo an additional round of whole genome duplication, acquiring an extra copy of protein-coding genes. To verify the function of eomesa genes in common carp, we established a biallelic gene editing technology in this tetraploidy fish through simultaneous disruption of two homologous genes, eomesa1 and eomesa2. We targeted four sites located upstream or within the sequences encoding the T-box domain. Sanger sequencing data indicated the average knockout efficiency was around 40% at T1-T3 sites and 10% at T4 site in embryos at 24 hours post fertilization. The individual editing efficiency was high to about 80% at T1-T3 sites and low to 13.3% at T4 site in larvae at 7 days post fertilization. Among 145 mosaic F0 examined at four months old, three individuals (Mutant 1-3) showed varying degrees of maldevelopment in the dorsal fin and loss of anal fin. Genotyping showed the genomes of all three mutants were disrupted at T3 sites. The null mutation rates on the eomesa1 and eomesa2 loci were 0% and 60% in Mutant 1, 66.7% and 100% in Mutant 2, and 90% and 77.8% in Mutant 3, respectively. In conclusion, we demonstrated a role of eomesa in the formation and development of median fins in Oujiang color common carp and established an method that simultaneously disrupt two homologous genes with one gRNA, which would be useful in genome editing in other polyploidy fishes.

Detecting Key Factors of Grasshopper Occurrence in Typical Steppe and Meadow Steppe by Integrating Machine Learning Model and Remote Sensing Data.

Grasshoppers mainly threaten natural grassland vegetation and crops. Therefore, it is of great significance to understand the relationship between environmental factors and grasshopper occurrence. This paper studies the spatial distribution and key factors of grasshopper occurrence in two grass types by integrating a machine learning model (Maxent) and remote sensing data within the major grasshopper occurrence areas of Inner Mongolia, China. The modelling results demonstrate that the typical steppe has larger suitable area and more proportion for grasshopper living than meadow steppe. The soil type, above biomass, altitude and temperature mainly determine the grasshopper occurrence in typical steppe and meadow steppe. However, the contribution of these factors in the two grass types is significantly different. In addition, related vegetation and meteorological factors affect the different growing stages of grasshoppers between the two grass types. This study clearly defines the different effects of key environmental factors (meteorology, vegetation, soil and topography) for grasshopper occurrence in typical steppe and meadow steppe. It also provides a methodology to guide early warning and precautions for grasshopper pest prevention. The findings of this study will be helpful for future management measures, to ensure grass ecological environment security and the sustainable development of grassland.

Real-time Raman analysis of the hydrolysis of formaldehyde oligomers for enhanced collagen fixation.

Formaldehyde (FA) is widely applied as a fixative for proteins such as collagen. Current studies have confirmed that the reversible oligomer-to-monomer equilibrium of FA in aqueous solution and the proportion of FA monomer is a significant factor affecting tissue fixation. Since the hydrolysis of FA oligomers is a dynamic process affected jointly by different factors, its real time monitoring has proved to be challenging. In this work, by utilizing the well-established Raman technique as an analytical platform, we identified the factors affecting the hydrolysis of FA oligomers by rationally examining the νs (OCO) and νas (OCO) modes with varying conditions, such as time, pH, temperature, and FA concentration. The optimized conditions of the highest hydrolysis rate of oligomers into monomers for fixation on collagen and tissues have been found to be relatively low FA concentration (≤5%) in phosphate-buffered saline at pH 9.0 in room temperature. In order to compare the fixation quality of the optimized conditions to that of the conventional conditions used by current medical practices (4% FA concentration in tap water under room temperature), Raman spectroscopy and chemical derivatization methods with o-phthalaldehyde and fluorescent probe FAP-1 have been investigated, and our results revealed that the FA molecules under our optimized conditions have reacted with at least 15% more amino groups within collagen compared to those under the conventional conditions mentioned above. This study provides direct evidence of the FA equilibrium in solution by Raman spectroscopy, which could be applied for the optimal use of FA in medicine, even at an industrial scale.

Tunable Light Field Modulations with Chip- and Fiber-Compatible Monolithic Dielectric Metasurfaces.

Metasurfaces with a high engineering degree of freedom are promising building blocks for applications in metalenses, beam deflectors, metaholograms, sensing, and many others. Though the fundamental and technological challenges, proposing tunable metasurfaces is still possible. Previous efforts in this field are mainly taken on designing sophisticated structures with active materials introduced. Here, we present a generic kind of monolithic dielectric metasurfaces for tunable light field modulations. Changes in the period number and surrounding refractive index enable discrete and continuous modulations of spatial light fields, respectively. We exemplify this concept in monolithic Lithium Niobate metasurfaces for tunable metalenses and beam deflectors. The utilization of monolithic dielectric materials facilitates the ready integration of the metasurfaces with both chip and optical fiber platforms. This concept is not limited by the availability of active materials or expensive and time-consuming fabrication techniques, which can be applied to any transparent dielectric materials and various optical platforms.

Fibre-Optic Surface Plasmon Resonance Biosensor for Monoclonal Antibody Titer Quantification.

An extraordinary optical transmission fibre-optic surface plasmon resonance biosensing platform was engineered to improve its portability and sensitivity, and was applied to monitor the concentrations of monoclonal antibodies (Mabs). By refining the fabricating procedure and changing the material of the flow cell and the components of the optical fibre, the biosensor is portable and robust to external interference. After the implementation of an effective template cleaning procedure and precise control during the fabrication process, a consistent sensitivity of 509 ± 5 nm per refractive index unit (nm/RIU) was achieved. The biosensor can detect the Mab with a limit of detection (LOD) of 0.44 µg/mL. The results show that the biosensor is a potential tool for the rapid quantification of Mab titers. The biosensor can be regenerated at least 10 times with 10 mM glycine (pH = 2.5), and consistent signal changes were obtained after regeneration. Moreover, the employment of a spacer arm SM(PEG)2, used for immobilising protein A onto the gold film, was demonstrated to be unable to improve the detecting sensitivity; thus, a simple procedure without the spacer arm could be used to prepare the protein A-based biosensor. Our results demonstrate that the fibre-optic surface plasmon resonance biosensor is competent for the real-time and on-line monitoring of antibody titers in the future as a process analytical technologies (PATs) tool for bioprocess developments and the manufacture of therapeutic antibodies.

Compact plasmonic fiber tip for sensitive and fast humidity and human breath monitoring.

We demonstrate a plasmonic fiber tip for relative humidity (RH) detection by integrating a gold nanomembrane onto the end-face of a multimode optical fiber via a flexible and high-efficiency transfer method. Fast water condensation/evaporation is responsible for the high performance of the fiber tip in response to RH. A high sensitivity of 279 pm/%RH is obtained in the range of $ 11\% \sim 92\% {\rm RH} $11%∼92%RH. Taking advantage of the fast dynamics (response and recovery times of 156 ms and 277 ms), the plasmonic fiber tip offers an excellent detection capability to human breaths at varied frequencies and depths. The compact, easy-fabrication, and fast-dynamics plasmonic platform has versatile potential for practical applications, including environmental and healthcare monitoring, as well as biochemical sensing.

High-performance optical sensing based on electromagnetically induced transparency-like effect in Tamm plasmon multilayer structures.

We present a novel kind of optical sensor based on the electromagnetically induced transparency (EIT)-like effect in a Tamm plasmon multilayer structure, which consists of a metal film on a dielectric Bragg grating with alternatively stacked TiO2 and SiO2 layers and a defect layer. The defect layer can induce a refractive-index-sensitive ultranarrow peak in the broad Tamm plasmon reflection dip. This nonintuitive phenomenon in analogy to the EIT effect in atomic systems originates from the coupling and destructive interference between the defect and Tamm plasmon modes in the multilayer structure. Taking advantage of this EIT-like effect, we achieve an ultrahigh sensing performance with a sensitivity of 416 nm/RIU and a figure of merit (FOM) of 682 RIU-1. The numerical simulations agree well with the theoretical calculations. Additionally, the spectral line shape can be effectively tailored by changing the defect layer thickness, significantly promoting the dimensionless FOM from 0.76×104 to more than 2.4×104. Our findings will facilitate the achievement of ultrasensitive optical sensors in multilayer structures and open up perspectives for practical applications, especially in gas, biochemical, and optofluidic sensing.

Investigation of magneto-induced linear dichroism of magnetic fluid.

A fiber-optic component is fabricated with etched fiber coated by magnetic fluid (MF) for its evanescent field to be modulated by the MF. The magneto-induced linear dichroism of the MF is investigated under different temperatures with the component. The experimental results show that the MF possesses weak linear dichroism (maximum of 2.37% at 25°C) caused by its sparse magneto-induced chains. Considering the relationships between the linear dichroisms and temperature, there is a transition point of magnetic field at ∼4 mT. Up to ∼4 mT, the linear dichroisms decrease with the temperature; however, for higher magnetic field strengths, the linear dichroisms increase with the temperature. Interestingly, a small initial linear dichroism (up to 0.255% at 5°C) without magnetic field is also observed.

Ultralong time response of magnetic fluid based on fiber-optic evanescent field.

The ultralong time (a few hours) response properties of magnetic fluid using etched optical fiber are visualized and investigated experimentally. The operating structure is made by injecting magnetic fluid into a capillary tube that contains etched single-mode fiber. An interesting extreme asymmetry is observed, in which the transmitted light intensity after the etched optical fiber cannot reach the final steady value when the external magnetic field is turned on (referred to as the falling process), while it can reach the stable state quickly once the magnetic field is turned off (referred to as the rising process). The relationship between the response times/loss rates of the transmitted light and the strength of the applied magnetic field is obtained. The physical mechanisms of two different processes are discussed qualitatively.

Erbium-doped fiber laser passively mode locked with few-layer WSe2/MoSe2 nanosheets.

Few-layer transition-metal dichalcogenide WSe2/MoSe2 nanosheets are fabricated by a liquid exfoliation technique using sodium deoxycholate bile salt as surfactant, and their nonlinear optical properties are investigated based on a balanced twin-detector measurement scheme. It is demonstrated that both types of nanosheets exhibit nonlinear saturable absorption properties at the wavelength of 1.55 µm. By depositing the nanosheets on side polished fiber (SPF) or mixing the nanosheets with polyvinyl alcohol (PVA) solution, SPF-WSe2 saturable absorber (SA), SPF-MoSe2 SA, PVA-WSe2 SA, and PVA-MoSe2 SA are successfully fabricated and further tested in erbium-doped fiber lasers. The SPF-based SA is capable of operating at the high pump regime without damage, and a train of 3252.65 MHz harmonically mode-locked pulses are obtained based on the SPF-WSe2 SA. Soliton mode locking operations are also achieved in the fiber laser separately with other three types of SAs, confirming that the WSe2 and MoSe2 nanosheets could act as cost-effective high-power SAs for ultrafast optics.

Nonlinear Saturable Absorption of Liquid-Exfoliated Molybdenum/Tungsten Ditelluride Nanosheets.

Molybdenum disulfide (MoS2 ) and tungsten disulfide (WS2 ), two representative transition metal dichalcogenide materials, have captured tremendous interest for their unique electronic, optical, and chemical properties. Compared with MoS2 and WS2 , molybdenum ditelluride (MoTe2 ) and tungsten ditelluride (WTe2 ) possess similar lattice structures while having smaller bandgaps (less than 1 eV), which is particularly interesting for applications in the near-infrared wavelength regime. Here, few-layer MoTe2 /WTe2 nanosheets are fabricated by a liquid exfoliation method using sodium deoxycholate bile salt as surfactant, and the nonlinear optical properties of the nanosheets are investigated. The results demonstrate that MoTe2 /WTe2 nanosheets exhibit nonlinear saturable absorption property at 1.55 µm. Soliton mode-locking operations are realized separately in erbium-doped fiber lasers utilizing two types of MoTe2 /WTe2 -based saturable absorbers, one of which is prepared by depositing the nanosheets on side polished fibers, while the other is fabricated by mixing the nanosheets with polyvinyl alcohol and then evaporating them on substrates. Numerous applications may benefit from the nonlinear saturable absorption features of MoTe2 /WTe2 nanosheets, such as visible/near-infrared pulsed laser, materials processing, optical sensors, and modulators.