A Biomimetic Multi-Component Subunit Vaccine via Ratiometric Loading of Hierarchical Hydrogels.

The development of subunit vaccines that mimic the molecular complexity of attenuated vaccines has been limited by the difficulty of intracellular co-delivery of multiple chemically diverse payloads at controllable concentrations. We report on hierarchical hydrogel depots employing simple poly(propylene sulfone) homopolymers to enable ratiometric loading of a protein antigen and four physicochemically distinct adjuvants in a hierarchical manner. The optimized vaccine consisted of immunostimulants either adsorbed to or encapsulated within nanogels, which were capable of noncovalent anchoring to subcutaneous tissues. These 5-component nanogel vaccines demonstrated enhanced humoral and cell-mediated immune responses compared to formulations with standard single adjuvant and antigen pairing. The use of a single simple homopolymer capable of rapid and stable loading and intracellular delivery of diverse molecular cargoes holds promise for facile development and optimization of scalable subunit vaccines and complex therapeutic formulations for a wide range of biomedical applications.

The type-I, III nodal ring, type-I, III quadratic nodal point, and Dirac valley phonons in 2D kagome lattices M2C3(M = As, Bi, Cd, Hg, P, Sb, Zn).

Topological phases in kagome systems have garnered considerable interest since the introduction of the colloidal kagome lattice. Our study employs first-principle calculations and symmetry analysis to predict the existence of ideal type-I, III nodal rings (NRs), type-I, III quadratic nodal points (QNPs), and Dirac valley phonons (DVPs) in a collection of two-dimensional (2D) kagome lattices M2C3(M = As, Bi, Cd, Hg, P, Sb, Zn). Specifically, the Dirac valley points (DVPs) can be observed at two inequivalent valleys with Berry phases of +πand-π, connected by edge arcs along the zigzag and armchair directions. Additionally, the QNP is pinned at the Γ point, and two edge states emerge from its projections. Notably, these kagome lattices also exhibit ideal type-I and III nodal rings protected by time inversion and spatial inversion symmetries. Our work examines the various categories of nodal points and nodal ring phonons within the 2D kagome systems and presents a selection of ideal candidates for investigating topological phonons in bosonic systems.

Controlled adsorption of multiple bioactive proteins enables targeted mast cell nanotherapy.

Protein adsorption onto nanomaterials often results in denaturation and loss of bioactivity. Controlling the adsorption process to maintain the protein structure and function has potential for a range of applications. Here we report that self-assembled poly(propylene sulfone) (PPSU) nanoparticles support the controlled formation of multicomponent enzyme and antibody coatings and maintain their bioactivity. Simulations indicate that hydrophobic patches on protein surfaces induce a site-specific dipole relaxation of PPSU assemblies to non-covalently anchor the proteins without disrupting the protein hydrogen bonding or structure. As a proof of concept, a nanotherapy employing multiple mast-cell-targeted antibodies for preventing anaphylaxis is demonstrated in a humanized mouse model. PPSU nanoparticles displaying an optimized ratio of co-adsorbed anti-Siglec-6 and anti-FcεRIα antibodies effectively inhibit mast cell activation and degranulation, preventing anaphylaxis. Protein immobilization on PPSU surfaces provides a simple and rapid platform for the development of targeted protein nanomedicines.

[Long-term lung protection of probiotics in children with sepsis and its mechanism].

OBJECTIVE: To observe the effects of probiotics supplementation on the natural killer T cell (NKT cell) and inflammatory factors in children with sepsis and its protective effect on long-term lung function. METHODS: A total of 100 children with sepsis admitted to the department of pediatric intensive care unit (PICU) of Henan Provincial People's Hospital from March 2021 to May 2022 were selected as the research objects. The children were randomly divided into placebo group and probiotic group, 50 cases in each group. In addition to the conventional treatment, the probiotic group was given oral or nasal administration of 0.5 g probiotics, three times a day for 30 days, and the placebo group received oral placebo. 40 healthy children were selected as the healthy control group. The levels of interleukins (IL-4, IL-10), interferon-γ (IFN-γ) and immunoglobulin E (IgE), percentages of NKT cell in blood and induced sputum, lung function of the two groups of children with sepsis were measured before treatment, 7 days after treatment, and during follow-up. All these data were compared with those of healthy children. Kaplan-Meier analysis was used to compare the incidence of cough varied cough (CVA) between the two septic groups. Multiple linear regression analysis was used to explore the influence of various factors on the proportion of NKT cells in induced sputum. RESULTS: In the placebo group, 2 cases died and 4 cases were lost to follow-up. In the probiotics group, 3 cases died and 5 cases were lost to follow-up. All the inflammatory factors of two groups decreased slowly after 7 day after treatment. There was no significance in the parameters of the two groups, but the levels of probiotic group declined more evidently. During the follow-up, a further decrease of inflammatory factors in probiotic group could be found, the levels of IL-4 and IL-10 were significantly different from those in the placebo group [IL-4 (ng/L): 20.3±9.3 vs. 27.6±11.9, IL-10 (ng/L): 23.1±6.8 vs. 14.4±4.4, both P < 0.05], with a significant decrease in IgE level (µg/L: 53.0±15.6 vs. 64.2±16.9, P < 0.05]. The results of flow cytometry showed that the percentage of NKT cell in peripheral blood in two septic groups decreased gradually, and the proportion of peripheral blood NKT cells in the probiotics group was significantly lower than that in the placebo group after 7 days of treatment [(4.2±0.9)% vs. (5.3±1.2)%, P < 0.05]. In the follow-up, the level of NKT cell in peripheral blood and induced sputum in probiotic group were lower than the placebo group [peripheral blood: (0.024±0.009)% vs. (0.029±0.008)%, induced sputum: (0.025±0.008)% vs. (0.035±0.01)%, both P < 0.05], which were similar to those in the healthy control group. Meanwhile, the percentage of predicted peak expiratory (PEF%) and ratio of forced expiratory volume in one second/forced vital capacity (FEV1/FVC) of probiotic group were higher than those in the placebo group [PEF%: (91.3±4.8)% vs. (85.8±8.6)%, FEV1/FVC ratio: (91.8±4.7)% vs. (87.2±7.4)%, both P < 0.05]. Although there was no significance in the incidence of CVA between two septic groups according to the Kaplan-Meier curve analysis, multiple linear regression analysis showed mechanical ventilation and allergic history were the risk factors for the increase of NKT cells [ß values were 0.584, 0.601, 95% confidence interval (95%CI) were 0.069 to 1.099, 0.011 to 1.192, P = 0.027, 0.046], and probiotics was an independent protective factor for the relieve of increase in NKT cells (ß value was -0.984,95%CI was -1.378 to -0.591, P = 0.001). CONCLUSIONS: Application of probiotics to septic children early could promote the recovery of NKT cell and inflammatory factors, and alleviate the lung function injury induced by them during follow-up, which is helpful to improve the long-term prognosis of the patients.

Structure, Properties, and Release Kinetics of the Polymer/Insect Repellent System Poly (l-Lactic Acid)/Ethyl Butylacetylaminopropionate (PLLA/IR3535).

The insect repellent ethyl butylacetylaminopropionate (IR3535) was used as a functional additive for poly (l-lactic acid) (PLLA) to modify its structure and mechanical properties and achieve insect repellency. PLLA/IR3535 mixtures at various compositions were prepared via melt extrusion. In the analyzed composition range of 0 to 23 m% IR3535, PLLA and IR3535 were miscible at the length scale represented by the glass transition temperature. Addition of IR3535 resulted in a significant decrease in the glass transition temperature of PLLA, as well as in the elastic modulus, indicating its efficiency as a plasticizer. All mixtures were amorphous after extrusion, though PLLA/IR3535 extrudates with an IR3535 content between 18 and 23 m% crystallized during long-term storage at ambient temperature, due to their low glass transition temperature. Quantification of the release of IR3535 into the environment by thermogravimetric analysis at different temperatures between 50 and 100 °C allowed the estimation of the evaporation rate at lower temperatures, suggesting an extremely low release rate with a time constant of the order of magnitude of 1-2 years at body temperature.

Biomimetic nanomaterial-facilitated oxygen generation strategies for enhancing tumour treatment outcomes.

Hypoxia, as a typical hallmark of the tumour microenvironment (TME), has been verified to exist in most malignancies and greatly hinders the outcome of tumour treatments, including chemotherapy, photodynamic therapy, radiotherapy, and immunotherapy. Various approaches to alleviate tumour hypoxia have been reported. Among them, biomimetic nanomaterial-facilitated tumour oxygenation strategies, based on the engagement of human endogenous proteins, red blood cells, the cell membrane, and catalase, are the most impressive due to their excellent tumour active-targeting ability and superior tumour-selective capability, which, however, have not yet been systematically reviewed. Herein, we are ready to describe the current progress in biomimetic nanomaterial-facilitated tumour oxygenation strategies and corresponding improvements in tumour treatment outputs. In this review, the underlying mechanism behind the superior effect of these biomimetic nanomaterials, compared with other materials, on alleviating the hypoxic TME is highlighted. Additionally, the ongoing problems and potential solutions are also discussed.

3D-printing of the polymer/insect-repellent system poly(l-lactic acid)/ethyl butylacetylaminopropionate (PLLA/IR3535).

The polymer/solvent system poly(l-lactic acid)/ethyl butylacetylaminopropionate (PLLA/IR3535) is regarded as an insect-repellent-delivery system, serving, e.g., for fighting mosquito-borne tropical diseases. In such systems the solid polymer hosts the liquid repellent, with the latter slowly released to the environment, expelling mosquitoes. As a new approach, exceeding prior work about application of different technologies to obtain such devices, in this work, samples of the polymer/repellent system PLLA/IR3535 were prepared by 3D-printing. The experiments showed that it is possible to print 3D-parts containing up to 25 m% repellent, with an only minor loss of repellent during the printing process. For samples containing low amount of repellent, crystallization of PLLA was suppressed due to the rather fast cooling step and the low bed temperature of around 25 °C, being lower than the glass transition temperature of the homogeneous polymer/repellent strands. At higher repellent concentration, due to the lowering of the glass transition temperature to near or even below ambient temperature, the crystallinity slowly increased during storage after printing. For all samples, regardless of the initial repellent concentration, the repellent-release rate increases with temperature, and at ambient temperature the release-time constant is in the order of 10 days. The study successfully proved the applicability of the technology of extrusion-based 3D-printing for the preparation of polymer parts with a specific shape/design containing mosquito-repellent at a concentration which raises the expectation to be used as a repellent delivery-device.

Dendritic peptide-conjugated polymeric nanovectors for non-toxic delivery of plasmid DNA and enhanced non-viral transfection of immune cells.

Plasmid DNA (pDNA) transfection is advantageous for gene therapies requiring larger genetic elements, including "all-in-one" CRISPR/Cas9 plasmids, but is limited by toxicity as well as poor intracellular release and transfection efficiency in immune cell populations. Here, we developed a synthetic non-viral gene delivery platform composed of poly(ethylene glycol)-b-poly(propylene sulfide) copolymers linked to a cationic dendritic peptide (DP) via a reduceable bond, PEG-b-PPS-ss-DP (PPDP). A library of self-assembling PPDP polymers was synthesized and screened to identify optimal constructs capable of transfecting macrophages with small (pCMV-DsRed, 4.6 kb) and large (pL-CRISPR.EFS.tRFP, 11.7 kb) plasmids. The optimized PPDP construct transfected macrophages, fibroblasts, dendritic cells, and T cells more efficiently and with less toxicity than a commercial Lipo2K reagent, regardless of pDNA size and under standard culture conditions in the presence of serum. The PPDP technology described herein is a stimuli-responsive polymeric nanovector that can be leveraged to meet diverse challenges in gene delivery.

Crystallization-Induced Polymer Scaffold Formation in the Polymer/Drug Delivery System Poly(l-lactic acid)/Ethyl Butylacetylaminopropionate (PLLA/IR3535).

Polymer/mosquito-repellent scaffolds exhibit increasing importance in long-lasting human skin protection to be used as wearable devices and allowing for controlled release of repellents. In this study, ethyl butylacetylaminopropionate (IR3535) was used as a human and environmental friendly active mosquito-repellent serving as a solvent to form functional poly(l-lactic acid) (PLLA) scaffolds by crystallization-based solid-liquid thermally induced phase separation. Crystallization of PLLA in the presence of IR3535 is faster than melt-crystallization of neat PLLA, and in the investigated concentration range from 5 to 50 mass % PLLA, its maximum crystallization rate increases with the PLLA content, by both, increases of the maximum crystal growth rate and of the nuclei density. By adjusting the polymer concentration and the crystallization temperature, microporous scaffolds of different fine structures are obtained, hosting the mosquito-repellent in intra- and interspherulitic pores for its intended later evaporation.

Homopolymer self-assembly of poly(propylene sulfone) hydrogels via dynamic noncovalent sulfone-sulfone bonding.

Natural biomolecules such as peptides and DNA can dynamically self-organize into diverse hierarchical structures. Mimicry of this homopolymer self-assembly using synthetic systems has remained limited but would be advantageous for the design of adaptive bio/nanomaterials. Here, we report both experiments and simulations on the dynamic network self-assembly and subsequent collapse of the synthetic homopolymer poly(propylene sulfone). The assembly is directed by dynamic noncovalent sulfone-sulfone bonds that are susceptible to solvent polarity. The hydration history, specified by the stepwise increase in water ratio within lower polarity water-miscible solvents like dimethylsulfoxide, controls the homopolymer assembly into crystalline frameworks or uniform nanostructured hydrogels of spherical, vesicular, or cylindrical morphologies. These electrostatic hydrogels have a high affinity for a wide range of organic solutes, achieving >95% encapsulation efficiency for hydrophilic small molecules and biologics. This system validates sulfone-sulfone bonding for dynamic self-assembly, presenting a robust platform for controllable gelation, nanofabrication, and molecular encapsulation.

Super-Resolution Imaging of Self-Assembled Nanocarriers Using Quantitative Spectroscopic Analysis for Cluster Extraction.

Self-assembled nanocarriers have inspired a range of applications for bioimaging, diagnostics, and drug delivery. The noninvasive visualization and characterization of these nanocarriers are important to understand their structure to function relationship. However, the quantitative visualization of nanocarriers in the sample's native environment remains challenging with the use of existing technologies. Single-molecule localization microscopy (SMLM) has the potential to provide both high-resolution visualization and quantitative analysis of nanocarriers in their native environment. However, nonspecific binding of fluorescent probes used in SMLM can introduce artifacts, which imposes challenges in the quantitative analysis of SMLM images. We showed the feasibility of using spectroscopic point accumulation for imaging in nanoscale topography (sPAINT) to visualize self-assembled polymersomes (PS) with molecular specificity. Furthermore, we analyzed the unique spectral signatures of Nile Red (NR) molecules bound to the PS to reject artifacts from nonspecific NR bindings. We further developed quantitative spectroscopic analysis for cluster extraction (qSPACE) to increase the localization density by 4-fold compared to sPAINT; thus, reducing variations in PS size measurements to less than 5%. Finally, using qSPACE, we quantitatively imaged PS at various concentrations in aqueous solutions with ∼20 nm localization precision and 97% reduction in sample misidentification relative to conventional SMLM.

Sequential intracellular release of water-soluble cargos from Shell-crosslinked polymersomes.

Polymer vesicles, i.e. polymersomes (PS), present unique nanostructures with an interior aqueous core that can encapsulate multiple independent cargos concurrently. However, the sequential release of such co-loaded actives remains a challenge. Here, we report the rational design and synthesis of oxidation-responsive shell-crosslinked PS with capability for the controlled, sequential release of encapsulated hydrophilic molecules and hydrogels. Amphiphilic brush block copolymers poly(oligo(ethylene glycol) methyl ether methacrylate)-b-poly(oligo(propylene sulfide) methacrylate) (POEGMA-POPSMA) were prepared to fabricate PS via self-assembly in aqueous solution. As a type of unique drug delivery vehicle, the interior of the PS was co-loaded with hydrophilic molecules and water-soluble poly(N-isopropylacrylamide) (PNIPAM) conjugates. Due to the thermosensitivity of PNIPAM, PNIPAM conjugates within the PS aqueous interior underwent a phase transition to form hydrogels in situ when the temperature was raised above the lower critical solution temperature (LCST) of PNIPAM. Via control of the overall shell permeability by oxidation, we realized the sequential release of two water-soluble payloads based on the assumption that hydrogels have much smaller membrane permeability than that of molecular cargos. The ability to control the timing of release of molecular dyes and PNIPAM-based hydrogels was also observed within live cells. Furthermore, leakage of hydrogels from the PS was effectively alleviated in comparison to molecular cargos, which would facilitate intracellular accumulation and prolonged retention of hydrogels within the cell cytoplasm. Thus, we demonstrate that the integration of responsive hydrogels into PS with crosslinkable membranes provides a facile and versatile technique to control the stability and release of water-soluble cargos for drug delivery purposes.

Immunotheranostic Polymersomes Modularly Assembled from Tetrablock and Diblock Copolymers with Oxidation-Responsive Fluorescence.

INTRODUCTION: Intracellular delivery is a key step for many applications in medicine and for investigations into cellular function. This is particularly true for immunotherapy, which often requires controlled delivery of antigen and adjuvants to the cytoplasm of immune cells. Due to the complex responses generated by the stimulation of diverse immune cell populations, it is critical to monitor which cells are targeted during treatment. To address this issue, we have engineered an immunotheranostic polymersome delivery system that fluorescently marks immune cells following intracellular delivery. METHODS: N-(3-bromopropyl)phthalimide end-capped poly(ethylene glycol)-bl-poly(propylene sulfide) (PEG-PPS-PI) was synthesized by anionic ring opening polymerization and linked with PEG-PPS-NH2 via a perylene bisimide (PBI) bridge to form a tetrablock copolymer (PEG-PPS-PBI-PPS-PEG). Block copolymers were assembled into polymersomes by thin film hydration in phosphate buffered saline and characterized by dynamic light scattering, cryogenic electron microscopy and fluorescence spectroscopy. Polymersomes were injected subcutaneously into the backs of mice, and draining lymph nodes were extracted for flow cytometric analysis of cellular uptake and disassembly. RESULTS: Modular self-assembly of tetrablock / diblock copolymers in aqueous solutions induced π-π stacking of the PBI linker that both red-shifted and quenched the PBI fluorescence. Reactive oxygen species within the endosomes of phagocytic immune cell populations oxidized the PPS blocks, which disassembled the polymersomes for dequenching and shifting of the PBI fluorescence from 640 nm to 550 nm emission. Lymph node resident macrophages and dendritic cells were found to increase in 550 nm emission over the course of 3 days by flow cytometry. CONCLUSIONS: Immunotheranostic polymersomes present a versatile platform to probe the contributions of specific cell populations during the elicitation of controlled immune responses. Flanking PBI with two oxidation-sensitive hydrophobic PPS blocks enhanced π stacking and introduced a mechanism for disrupting π-π interactions to shift PBI fluorescence in response to oxidative conditions. Shifts from red (640 nm) to green (550 nm) fluorescence occurred in the presence of physiologically relevant concentrations of reactive oxygen species and could be observed within phagocytic cells both in vitro and in vivo.

POSS-containing red fluorescent nanoparticles for rapid detection of aqueous fluoride ions.

Polyhedral oligomeric silsesquioxane (POSS)-containing red fluorescent nanoparticles were designed and prepared for rapid detection of aqueous fluoride ions by virtue of the fluoride-triggered self-quenching of perylene bisimide dyes in nanoparticle cores.

Utilizing modified flavonoids to construct a chemodosimeter array for discrimination of different palladium species by using principal component analysis.

A simple chemodosimeter array has been successfully achieved for the detection and discrimination of different palladium species by using principal component analysis.

A new ratiometric ESIPT sensor for detection of palladium species in aqueous solution.

An aqueous ratiometric ESIPT sensor with a 87 nM (15.4 ppb) detection limit was successfully synthesized and applied for detection of all oxidation states of palladium species.

Use of alcohols as reducing agents for synthesis of well-defined polymers by AGET-ATRP.

Alcohols have been demonstrated to be efficient reducing agents for AGET-ATRP for the first time. Well-controlled polymerizations have been successfully achieved with the typical characteristics of "living"/controlled radical polymerization.

Conjugated polymers containing a 2,2'-biimidazole moiety--a novel fluorescent sensing platform.

Two novel conjugated polymers containing a 2,2'-biimidazole moiety have been designed, synthesized, and demonstrated to be used as an effective fluorescent sensing platform for detection of Ag(+) and cysteine. This is the first example utilizing a fluorescent conjugated polymer-Ag(+) complex to selectively detect Cys with a nanomolar range detection limit.

Synthesis and characterization of a fluorescent polymer containing 2,6-bis(2-thienyl)pyridine moieties as a highly efficient sensor for Pd2+ detection.

A novel conjugated polymer chemosensor 1 containing 2,6-bis(2-thienyl)pyridine has been synthesized and exhibits a high sensitivity and selectivity for palladium ion detection based on the fluorescent quenching effect.