Simultaneous removal of phenanthrene and Pb using novel PPG-CNTs-nZVI beads.

PPG-CNTs-nZVI bead was synthesized by polyvinyl alcohol, pumice, carbon nanotube, and guar gum-nanoscale zero-valent iron to be applied on simultaneously removal of polycyclic aromatic hydrocarbons (PAHs; phenanthrene) and heavy metals (Pb2+) via adsorption. The individual and simultaneous removal efficiency of phenanthrene and Pb2+ using the PPG-CNTs-nZVI beads was evaluated with a range of initial concentrations of these two pollutants. The kinetics and isotherms of phenanthrene and Pb2+ adsorption by the PPG-CNTs-nZVI beads were also determined. The PPG-CNTs-nZVI beads show reasonably high phenanthrene adsorption capacities (up to 0.16 mg/g), and they absorbed 85% of the phenanthrene (initial concentration 0.5 mg/L) in 30 min. High Pb2+ adsorption capabilities were also demonstrated by the PPG-CNTs-nZVI beads (up to 11.6 mg/g). The adsorption fits the Langmuir model better than the Freundlich model. The adsorption still remained stable with various ionic strength circumstances and a wide pH range (2-5). Additionally, the co-adsorption of phenanthrene and Pb2+ by the PPG-CNTs-nZVI beads resulted in synergistic effects. Particularly, phenanthrene-Pb2+ complex formation via π-cation interactions demonstrated a greater affinity than phenanthrene or Pb2+ alone. The present findings suggest that PPG-CNTs-nZVI beads may be effective sorbents for the simultaneous removal of PAHs and heavy metals from contaminated waters.

Four Lanthanide(III) Metal-Organic Frameworks Fabricated by Bithiophene Dicarboxylate for High Inherent Proton Conduction.

Currently, it is still a challenge to directly achieve highly stable metal-organic frameworks (MOFs) with superior proton conductivity solely through the exquisite design of ligands and the attentive selection of metal nodes. Inspired by this, we are intrigued by a multifunctional dicarboxylate ligand including dithiophene groups, 3,4-dimethylthieno[2,3-b]thiophene-2,5-dicarboxylic acid (H2DTD), and lanthanide ions with distinct coordination topologies. Successfully, four isostructural three-dimensional lanthanide(III)-based MOFs, [Ln2(DTD)3(DEF)4]·DEF·6H2O [LnIII = TbIII (Tb-MOF), EuIII (Eu-MOF), SmIII (Sm-MOF), and DyIII (Dy-MOF)], were solvothermally prepared, in which the effective proton transport will be provided by the coordinated or free solvent molecules, the crystalline water molecules, and the framework components, as well as a large number of highly electronegative S and O atoms. As expected, the four Ln-MOFs demonstrated the highest proton conductivities (σ) being 0.54 × 10-3, 3.75 × 10-3, 1.28 × 10-3, and 1.92 × 10-3 S·cm-1 for the four MOFs, respectively, at 100 °C/98% relative humidity (RH). Excitingly, Dy-MOF demonstrated an extraordinary ultrahigh σ of 1 × 10-3 S·cm-1 at 30 °C/98% RH. Additionally, the plausible proton transport mechanisms were emphasized.

Bio-inspired engineered ferritin-albumin nanocomplexes for targeted ferroptosis therapy.

Nanotechnology-enabled ferroptosis therapy is an emerging paradigm for tumor treatment, but amplifying ferroptotic damage in tumor cells in a safe and selective manner is still challenging, which severely hinders its clinical translation. In this study, we constructed a bio-inspired protein nanocomplex based on natural-occurring bovine serum albumin (BSA) and ferritin for efficient tumor elimination via cooperatively enhanced ferroptosis therapy. The long-circulating BSA molecules provided multiple anchoring points for the efficient loading of the GPX4-inhibiting ferroptosis inducer (1S, 3R) RAS-selective lethal 3 (RSL3), which was further complexed with ferritin via acidity-responsive glutaraldehyde linkers. The ferritin moieties may not only bind to transferrin receptor 1 overexpressed on tumor cell membrane for targeted endocytic uptake but also be degraded in lysosomes to induce iron overload, which could substantially promote the lipid peroxidation in tumor cells and cooperate with the glutathione peroxidase 4 (GPX4)-inhibiting capability of RSL3 to induce pronounced ferroptosis. The in vitro and in vivo results collectively demonstrated that the albumin-ferritin-based nanocomplex could present superior antitumor effects with no obvious adverse effects, which may open new avenues for the clinical translation of ferroptosis-dependent therapeutic modalities.

Er3+/Sm3+ co-doped Bi2O2CO3 in photocatalytic water treatment: Immobilization, acute toxicity, sterilization, and catalytic oxidation activity.

Defect construction and rare earth doping are the linchpins to completing the target of partial electronic regulation. In Er3+/Sm3+ co-doping Bi2O2CO3, rare earth doping resulted in the exposure of {001} crystal plane in Bi2O2CO3 and cause surface defects and electron traps, achieving wide light response capability and fast carrier separation. Furthermore, a potential TC degradation route was acknowledged derived from LC-MS. Then, the median lethal concentration LC50 (96 h) is 80 ppm, probing the 2E2SBOC photocatalyst has low toxicity in actual wastewater. Combining with immobilization technology, not only does it have little impact on the organisms in the wastewater, but it is easy to recycle after degradation. In terms of new water disinfection technology, bacterial experiments in natural waters proved that 2E2SBOC has a potential disinfection system, which promotes the exposure of more active sites during degradation. This effective project offers a novel perspective for the development and application of rare-earth-doped photocatalysts.

Construction of Z-scheme Ag-AgBr/Bi2O2CO3/CNT heterojunctions with remarkable photocatalytic performance using carbon nanotubes as efficient electronic mediators.

It is a useful strategy to use a solid electronic mediator with good conductivity to assist the separation of semiconductor photo-induced electron-hole pairs and the redox of semiconductor materials. In order to construct a photocatalyst for more efficient photocatalytic degradation of antibiotics, a simple hydrothermal and precipitation method was used to construct the Ag-AgBr/Bi2O2CO3/CNT Z-scheme heterojunction by using carbon nanotubes (CNTs) as electronic mediators. Compared with the pristine AgBr, Bi2O2CO3, Bi2O2CO3/CNT, the 30%Ag-AgBr/Bi2O2CO3/CNT photocatalyst has better photocatalytic activity under visible light irradiation, showing the best degradation ability to tetracycline (TC). Meanwhile, the photocatalytic properties of 30%Ag-AgBr/Bi2O2CO3/CNT in different pH and inorganic ions were studied. Finally, the degradation pathway and catalytic mechanism of 30%Ag-AgBr/Bi2O2CO3/CNT photocatalytic degradation of TC were also argued. The construction of the Z-scheme electron transport pathway, in which CNTs were used as electronic mediators, and the SPR effect of Ag and Bi metal, which enable the effective separation and transfer of photo-generated electron-hole pairs, are responsible for the significant improvement in photocatalytic performance. It opens up new possibilities for designing and developing high-efficiency photocatalysts with CNTs as the electronic mediator.