Molecularly Imprinted Solid Phase Extraction using Bismethacryloyl-ß-cyclodextrin and Methacrylic Acid as Double Functional Monomers for Selective Analysis of Glycyrrhizic Acid in Aqueous Media.

In this work, a new molecularly imprinted solid phase extraction protocol was developed for the selective extraction and purification of glycyrrhizic acid from liquorice roots in aqueous media. The molecularly imprinted polymers (MIPs) for glycyrrhizic acid were prepared by using bismethacryloyl-ß-cyclodextrin and methacrylic acid as double functional monomers and characterized by Fourier transform infrared spectroscopy, scanning electron microscope, thermo gravimetric analysis, nitrogen adsorption and elemental analysis. In aqueous media, the adsorption properties of MIPs including adsorption kinetics, adsorption isotherms and selectivity adsorption were investigated. The characterization of imprinted polymers indicated that the prepared MIPs had good stability and many cavity structures. The results of adsorption experiments illustrated the MIPs had high adsorption capacity of glycyrrhizic acid (69.3 mg g-1) with the imprinting factor 3.77, and it took ~5 min to get adsorption equilibrium. The MIPs could be used as an solid phase extraction sorbent absorbent for enrichment and purification of glycyrrhizic acid from the crude extraction of licorice roots, and the results showed promising practical value.

Metallic Cobalt Encapsulated in Bamboo-Like and Nitrogen-Rich Carbonitride Nanotubes for Hydrogen Evolution Reaction.

Despite being technically possible, the hydrogen production by means of electrocatalytic water splitting is still practically unreachable mainly because of the lack of inexpensive and high active catalysts. Herein, a novel and facile approach by melamine polymerization, exfoliation and Co(2+)-assisted thermal annealing is developed to fabricate Co nanoparticles embedded in bamboo-like and nitrogen-rich carbonitride nanotubes (Co@NCN). The electronic interaction between the embedded Co nanoparticles and N-rich carbonitride nanotubes could strongly promote the HER performance. The optimized Co@NCN-800 exhibits outstanding HER activity with an onset potential of -89 mV (vs RHE), a large exchange current density of 62.2 µA cm(-2), and small Tafel slope of 82 mV dec(-1), as well as excellent stability (5000 cycles) in acid media, demonstrating the potential for the replacement of Pt-based catalysts. Control experiments reveal that the superior performance should be ascribed to the synergistic effects between embedded Co nanoparticles and N-rich carbonitride nanotubes, which originate from the high pyridinic N content, fast charge transfer rate from Co particles to electrodes via electronic coupling, and porous and bamboo-like carbonitride nanotubes for more active sites in HER.

A novel surface molecularly imprinted polymer as the solid-phase extraction adsorbent for the selective determination of ampicillin sodium in milk and blood samples.

Surface molecularly imprinted polymers (SMIPs) for selective adsorption of ampicillin sodium were synthesized using surface molecular imprinting technique with silica gel as a support. The physical and morphological characteristics of the polymers were investigated by scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), elemental analysis and nitrogen adsorption-desorption test. The obtained results showed that the SMIPs displayed great adsorption capacity (13.5 µg/mg), high recognition ability (the imprinted factor is 3.2) and good binding kinetics for ampicillin sodium. Finally, as solid phase extraction adsorbents, the SMIPs coupled with HPLC method were validated and applied for the enrichment, purification and determination of ampicillin sodium in real milk and blood samples. The averages of spiked accuracy ranged from 92.1% to 107.6%. The relative standard deviations of intra- and inter-day precisions were less than 4.6%. This study provides a new and promising method for enriching, extracting and determining ampicillin sodium in complex biological samples.

Preparation and evaluation of a molecularly imprinted sol-gel material as the solid-phase extraction adsorbents for the specific recognition of cloxacilloic acid in cloxacillin.

Highly selective molecularly imprinted polymers on the surface of silica gels were prepared by a sol-gel process and used as solid-phase extraction adsorbents for the specific recognition, enrichment and detection of cloxacilloic acid in cloxacillin. The obtained polymers were characterized by scanning electron microscopy, FTIR spectroscopy, nitrogen adsorption and desorption, elemental analysis and thermogravimetric analysis. The imprinted polymers not only possessed high adsorption capacity (6.5 µg/mg), but also exhibited fast adsorption kinetics (they adsorb 80% of the maximum amount within 20 min) and excellent selectivity (the imprinted factor was 3.6). A method using the imprinted polymers as solid-phase extraction adsorbents coupled with high-performance liquid chromatography was established with good specificity, linearity (r = 0.9962), precision (ranging from 0.5 to 6.7%), accuracy (ranging from 93.9 to 97.7%) and extraction recoveries (ranging from 78.8 to 89.8%). The limits of detection and quantification were 0.07 and 0.25 mg/g, respectively. This work could provide a promising method in the enrichment, extraction and detection of allergenic impurities in the manufacture, storage and application of cloxacillin.

Co-Doped MoS2 Nanosheets with the Dominant CoMoS Phase Coated on Carbon as an Excellent Electrocatalyst for Hydrogen Evolution.

Highly active and low-cost catalysts for hydrogen evolution reaction (HER) are crucial for the development of efficient water splitting. Molybdenum disulfide (MoS2) nanosheets possess unique physical and chemical properties, which make them promising candidates for HER. Herein, we reported a facile, effective, and scalable strategy by a deposition-precipitation method to fabricate metal-doped (Fe, Co, Ni) molybdenum sulfide with a few layers on carbon black as noble metal-free electrocatalysts for HER. The CoMoS phase after thermal annealing in Co-doped MoS2 plays a crucial role for the enhanced HER. The optimized Co-doped MoS2 catalyst shows superior HER performance with a high exchange current density of 0.03 mA·cm(-2), low onset potential of 90 mV, and small Tafel slope of 50 mV·dec(-1), which also exhibits excellent stability of 10000 cycles with negligible loss of the cathodic current. The superior HER activity originates from the synergistically structural and electronic modulations between MoS2 and Co ions, abundant defects in the active edge sites, as well as the good balance between active sites and electronic conductivity. Thanks to their ease of synthesis, low cost, and high activity, the Co-doped MoS2 catalysts appear to be promising HER catalysts for electrochemical water splitting.