Integrated proteomics and metabolomics analysis of sclerosis-related proteins and femoral head necrosis following internal fixation of femoral neck fractures.

Femoral head necrosis (FHN) is a serious complication after femoral neck fractures (FNF), often linked to sclerosis around screw paths. Our study aimed to uncover the proteomic and metabolomic underpinnings of FHN and sclerosis using integrated proteomics and metabolomics analyses. We identified differentially expressed proteins (DEPs) and metabolites (DEMs) among three groups: patients with FNF (Group A), sclerosis (Group B), and FHN (Group C). Using the Kyoto Encyclopedia of Genes and Genomes and Gene Ontology enrichment analyses, we examined the roles of these proteins and metabolites. Our findings highlight the significant differences across the groups, with 218 DEPs and 44 DEMs identified between the sclerosis and FNF groups, 247 DEPs and 31 DEMs between the FHN and sclerosis groups, and a stark 682 DEPs and 94 DEMs between the FHN and FNF groups. Activities related to carbonate dehydratase and hydrolase were similar in the FHN and sclerosis groups, whereas extracellular region and lysosome were prevalent in the FHN and FNF groups. Our study also emphasized the involvement of the PI3K-Akt pathway in sclerosis and FHN. Moreover, the key metabolic pathways were implicated in glycerophospholipid metabolism and retrograde endocannabinoid signaling. Using western blotting, we confirmed the pivotal role of specific genes/proteins such as ITGB5, TNXB, CA II, and CA III in sclerosis and acid phosphatase 5 and cathepsin K in FHN. This comprehensive analyses elucidates the molecular mechanisms behind sclerosis and FHN and suggests potential biomarkers and therapeutic targets, paving the way for improved treatment strategies. Further validation of the findings is necessary to strengthen the robustness and reliability of the results.

Biomechanical properties of articular cartilage in different regions and sites of the knee joint: acquisition of osteochondral allografts.

Osteochondral allograft (OCA) transplantation involves grafting of natural hyaline cartilage and supporting subchondral bone into the cartilage defect area to restore its biomechanical and tissue structure. However, differences in biomechanical properties and donor-host matching may impair the integration of articular cartilage (AC). This study analyzed the biomechanical properties of the AC in different regions of different sites of the knee joint and provided a novel approach to OCA transplantation. Intact stifle joints from skeletally mature pigs were collected from a local abattoir less than 8 h after slaughter. OCAs were collected from different regions of the joints. The patella and the tibial plateau were divided into medial and lateral regions, while the trochlea and femoral condyle were divided into six regions. The OCAs were analyzed and compared for Young's modulus, the compressive modulus, and cartilage thickness. Young's modulus, cartilage thickness, and compressive modulus of OCA were significantly different in different regions of the joints. A negative correlation was observed between Young's modulus and the proportion of the subchondral bone (r = - 0.4241, P < 0.0001). Cartilage thickness was positively correlated with Young's modulus (r = 0.4473, P < 0.0001) and the compressive modulus (r = 0.3678, P < 0.0001). During OCA transplantation, OCAs should be transplanted in the same regions, or at the closest possible regions to maintain consistency of the biomechanical properties and cartilage thickness of the donor and recipient, to ensure smooth integration with the surrounding tissue. A 7 mm depth achieved a higher Young's modulus, and may represent the ideal length.

Near-infrared â ¡ light-assisted Cu-containing porous TiO2 coating for combating implant-associated infection.

Treatment implant-associated infections remains a severe challenge in the clinical practice. This work focuses on the fabrication of Cu-containing porous TiO2 coatings on titanium (Ti) by a combination of magnetron sputtering and dealloying techniques. Additionally, photothermal therapy is employed to enhance the effect of Cu ions in preventing bacterial infection. After the dealloying, most of Cu element was removed from the magnetron sputtered Cu-containing films, and porous TiO2 coatings were prepared on Ti. The formation of porous nanostructures significantly enhanced the photothermal conversion performance under NIR-II light irradiation. The combined effect of hyperthermia and Cu ions demonstrated enhanced antibacterial activity in both in vitro and in vivo experiments, and the antibacterial efficiency can reach 99% against Streptococcus mutans. Moreover, the porous TiO2 coatings also exhibited excellent biocompatibility. This modification of the titanium surface structure through dealloying changes may offer a novel approach to enhance the antimicrobial properties of titanium implants.

High-Speed Centrifugation Efficiently Removes Immunogenic Elements in Osteochondral Allografts.

OBJECTIVES: The current clinical pulse lavage technique for flushing fresh osteochondral allografts (OCAs) to remove immunogenic elements from the subchondral bone is ineffective. This study aimed to identify the optimal method for removing immunogenic elements from OCAs. METHODS: We examined five methods for the physical removal of immunogenic elements from OCAs from the femoral condyle of porcine knees. We distributed the OCAs randomly into the following seven groups: (1) control, (2) saline, (3) ultrasound, (4) vortex vibration (VV), (5) low-pulse lavage (LPL), (6) high-pulse lavage (HPL), and (7) high-speed centrifugation (HSC). OCAs were evaluated using weight measurement, micro-computed tomography (micro-CT), macroscopic and histological evaluation, DNA quantification, and chondrocyte activity testing. Additionally, the subchondral bone was zoned to assess the bone marrow and nucleated cell contents. One-way ANOVA and paired two-tailed Student's t-test are used for statistical analysis. RESULTS: Histological evaluation and DNA quantification showed no significant reduction in marrow elements compared to the control group after the OCAs were treated with saline, ultrasound, or VV treatments; however, there was a significant reduction in marrow elements after LPL, HPL, and HSC treatments. Furthermore, HSC more effectively reduced the marrow elements of OCAs in the middle and deep zones compared with LPL (p < 0.0001) and HPL (p < 0.0001). Macroscopic evaluation revealed a significant reduction in blood, lipid, and marrow elements in the subchondral bone after HSC. Micro-CT, histological analyses, and chondrocyte viability results showed that HSC did not damage the subchondral bone and cartilage; however, LPL and HPL may damage the subchondral bone. CONCLUSION: HSC may play an important role in decreasing immunogenicity and therefore potentially increasing the success of OCA transplantation.

Treatment of Articular Cartilage Defects: A Descriptive Analysis of Clinical Characteristics and Global Trends Reported from 2001 to 2020.

PURPOSE: To evaluate the clinical characteristics and global trends in the surgical treatment of articular cartilage defects. METHODS: Studies in English published between January 1, 2001 and December 31, 2020 were retrieved from MEDLINE, WOS, INSPEC, SCIELO, KJD, and RSCI on the "Web of Science." Patient data were extracted, including age, sex, defect location and laterality, duration of follow-up and symptoms, and body mass index (BMI). Data were further stratified according to the surgical method, lesion location, procedural type and geographical area, and time period. A comparative analysis was performed. RESULTS: Overall, 443 studies involving 26,854 patients (mean age, 35.25 years; men, 60.5%) were included. The mean lesion size and patient BMI were 3.51 cm2 and 25.61 kg/m2, respectively. Cartilage defects at the knees, talus, and hips affected 20,850 (77.64%), 3,983 (14.83%), and 1,425 (5.31%) patients, respectively. The numbers of patients who underwent autologous chondrocyte implantation, arthroscopic debridement/chondroplasty, osteochondral allograft (OCA), osteochondral autologous transplantation, and microfracture were 7,114 (26.49%), 5,056 (18.83%), 3,942 (14.68%), 3,766 (14.02%), and 2,835 (10.56%), respectively. European patients were the most numerous and youngest. North American patients had the largest defects. The number of patients increased from 305 in 2001 to 3,017 in 2020. In the last 5 years, the frequency of OCAs showed a greatly increasing trend. CONCLUSION: Clinical characteristics and global trends in the surgical treatment of articular cartilage defects were revealed. The choice of operation should be based on the patient characteristics and defect location, size, and shape, as well as the patient's preference.

Characteristics and Clinical Outcomes After Osteochondral Allograft Transplantation for Treating Articular Cartilage Defects: Systematic Review and Single-Arm Meta-analysis of Studies From 2001 to 2020.

Background: Osteochondral allograft transplantation (OCA) treats symptomatic focal cartilage defects with satisfactory clinical results. Purpose: To comprehensively analyze the characteristics and clinical outcomes of OCA for treating articular cartilage defects. Study Design: Systematic review; Level of evidence, 4. Methods: We searched Embase, PubMed, Cochrane Database, and Web of Science for studies published between January 1, 2001, and December 31, 2020, on OCA for treating articular cartilage defects. Publication information, patient data, osteochondral allograft storage details, and clinical outcomes were extracted to conduct a comprehensive summative analysis. Results: In total, 105 studies involving 5952 patients were included. The annual reported number of patients treated with OCA increased from 69 in 2001 to 1065 in 2020, peaking at 1504 cases in 2018. Most studies (90.1%) were performed in the United States. The mean age at surgery was 34.2 years, and 60.8% of patients were male and had a mean body mass index of 26.7 kg/m2. The mean lesion area was 5.05 cm2, the mean follow-up duration was 54.39 months, the mean graft size was 6.85 cm2, and the number of grafts per patient was 54.7. The failure rate after OCA was 18.8%, and 83.1% of patients reported satisfactory results. Allograft survival rates at 2, 5, 10, 15, 20, and 25 years were 94%, 87.9%, 80%, 73%, 55%, and 59.4%, respectively. OCA was mainly performed on the knee (88.9%). The most common diagnosis in the knee was osteochondritis dissecans (37.9%), and the most common defect location was the medial femoral condyle (52%). The most common concomitant procedures were high tibial osteotomy (28.4%) and meniscal allograft transplantation (24.7%). After OCA failure, 54.7% of patients underwent revision with primary total knee arthroplasty. Conclusion: The annual reported number of patients who underwent OCA showed a significant upward trend, especially from 2016 to 2020. Patients receiving OCA were predominantly young male adults with a high body mass index. OCA was more established for knee cartilage than an injury at other sites, and its best indication was osteochondritis dissecans. This analysis demonstrated satisfactory long-term postoperative outcomes.

Prevention of sclerosis around cannulated screw after treatment of femoral neck fractures with bioceramic nails: a finite element analysis.

PURPOSE: Conventional cannulated screws (CS) are the main treatment method for femoral neck fractures (FNF). However, the rate of femoral head necrosis remains high after FNF treatment. The study aimed to compare the biomechanical features of different internal fixation materials for the treatment of Pauwel type III FNF to explore new strategies for clinical management. METHODS: A new material was prepared by applying casting, freeze drying and sintering process. The independently developed calcium magnesium silicate ceramic powder and hydrogel solution were evenly mixed to obtain a high-viscosity bio-ink, and a bioceramic nail (BN) with high mechanical strength and high fracture toughness was successfully prepared. Four internal fixations were developed to establish the Pauwel type III FNF and healed fracture finite element models: A, three CSs; B, three BNs; C, two BNs and one CS; D, one BN and two CSs. Von Mises stress and displacement of the implants and femur were observed. RESULTS: The measured Mg content in ceramic powder was 2.08 wt%. The spectral data confirmed that the ceramic powder has high crystallinity, which coincides with the wollastonite-2 M (PDF# 27-0088). The maximum von Mises stresses for the four models were concentrated in the lower part of the fracture surface, at 318.42 Mpa, 103.52 MPa, 121.16 MPa, and 144.06 MPa in models A, B, C, and D, respectively. Moreover, the maximum Von-mises stresses of the implants of the four models were concentrated near the fracture end at 243.65 MPa (A) and 58.02 MPa (B), 102.18 MPa (C), and 144.06 MPa (D). The maximum displacements of the four models were 5.36 mm (A), 3.41 mm (B), 3.60 mm (C), and 3.71 mm (D). The displacements of the three models with BNs were similar and smaller than that of the triple CS fracture model. In the fracture healing models with and without three CSs, the greatest stress concentration was scattered among the lowest screw tail, femoral calcar region, and lateral femur shaft. The displacement and stress distributions in both models are generally consistent. The stress distribution and displacement of the three healed femoral models with BNs were essentially identical to the healing models with three CSs. The maximum von Mises stresses were 65.94 MPa (B), 64.61 MPa (C), and 66.99 MPa (D) while the maximum displacements of the three healed femoral models were 2.49 mm (B), 2.56 mm (C), and 2.49 mm (D), respectively. CONCLUSIONS: Bioceramic nails offer greater advantages than conventional canulated screws after femoral neck fractures. However, the combination of bioceramic nails and CSs is more clinically realistic; replacing all internal fixations with bioceramic nails after the healing of femoral neck fractures can solve the problem of sclerosis formation around CSs and improve bone reconstruction by their bioactivity.

Titanium alloy cannulated screws and biodegrade ceramic nails for treatment of femoral neck fractures: A finite element analysis.

BACKGROUND: Our previous studies have demonstrated the mechanical effect of sclerosis around screw paths on the healing of femoral neck fractures (FNF) after internal fixation. Furthermore, we discussed the possibility of using bioceramic nails (BNs) to prevent sclerosis. However, all these studies were conducted under static conditions as the patient was standing on one leg, while the effect of the stress generated during movement is unknown. The purpose of this study was to evaluate the stress and displacement under dynamic stress loading conditions. METHODS: Two types of internal fixation, namely cannulated screws and bioceramic nails, were utilized in conjunction with various finite element models of the femur. These models included the femoral neck fracture healing model, the femoral neck fracture model, and the sclerosis around screws model. The resulting stress and displacement were analyzed by applying the contact forces associated with the most demanding activities during gait, including walking, standing, and knee bending. The present study establishes a comprehensive framework for investigating the biomechanical properties of internal fixation devices in the context of femoral fractures. RESULTS: The stress at the top of the femoral head in the sclerotic model was increased by roughly 15 MPa during the knee bend and walking phases and by about 30 MPa during the standing phase compared to the healing model. The area of high stress at the top of the femoral head was increased during the sclerotic model's walking and standing phases. Additionally, the stress distribution throughout the dynamic gait cycle was comparable before and after the removal of internal fixations following the healing of the FNF. The overall stress distribution of the entire fractured femoral model was lower and more evenly distributed in all combinations of internal fixation. Furthermore, the internal fixation stress concentration was lower when more BNs were used. In the fractured model with three cannulated screws (CSs), however, the majority of the stress was concentrated around the ends of the fractures.The maximal stress in the healing model with one CS and two BNs was the highest at all stages of gait over three combinations of internal fixation, and the stress was mainly carried by CS. CONCLUSIONS: The presence of sclerosis around screw paths increases the risk of femoral head necrosis. Removal of CS has little effect on the mechanics of the femur after healing of the FNF. BNs have several advantages over conventional CSs after FNF. Replacing all internal fixations with BNs after the healing of FNF may solve the problem of sclerosis formation around CSs to improve bone reconstruction owing to their bioactivity.

[Systematic evaluation of the incidence of the knee donor area after autobone cartilage mosaic xentoplasty].

OBJECTIVE: To provide an overview of the incidence of knee donor -site morbidity after autologous osteochondral mosaicplasty. METHODS: A comprehensive search was conducted in PubMed, EMbase, Wanfang Medical Network, and CNKI databases from January 2010 to April 20, 2021. Relevant literature was selected based on predefined inclusion and exclusion criteria, and data were evaluated and extracted. The correlation between the number and size of transplanted osteochondral columns and donor-site morbidity was analyzed. RESULTS: A total of 13 literatures were included, comprising a total of 661 patients. Statistical analysis revealed an incidence of knee donor-site morbidity at 8.6% (57/661), with knee pain being the most common complaint, accounting for 4.2%(28/661). There was no significant correlation between the number of osteochondral columns and postoperative donor-site incidence (P=0.424, N=10), nor between the diameter size of osteochondral columns and postoperative donor-site incidence(P=0.699, N=7). CONCLUSION: Autologous osteochondral mosaicplasty is associated with a considerable incidence of knee donor-site morbidity, with knee pain being the most frequent complaint. There is no apparent correlation between donor-site incidence and the number and size of transplanted osteochondral columns. Donors should be informed about the potential risks.

The enhanced visible light driven photocatalytic activity of zinc porphyrin/g-C3N4 nanosheet for efficient bacterial infected wound healing.

Graphitic carbon nitride (g-C3N4) has received much attention as a metal-free polymeric two-dimensional photocatalyst for antibiotic-free antibacterial application. However, the weak photocatalytic antibacterial activity of pure g-C3N4 stimulated by visible light limits its applications. Herein, g-C3N4 is modified with Zinc (II) meso-tetrakis (4-carboxyphenyl) porphyrin (ZnTCPP) by amidation reaction to enhance the utilization of visible light and reduce the recombination of electron-hole pairs. The composite (ZP/CN) is used to treat bacterial infection under visible light irradiation with a high efficacy of 99.99% within 10 min due to the enhanced photocatalytic activity. Ultraviolet photoelectron spectroscopy and density flooding theory calculations indicate the excellent electrical conductivity between the interface of ZnTCPP and g-C3N4. The formed built-in electric field is responsible for the high visible photocatalytic performance of ZP/CN. In vitro and in vivo tests have demonstrated that ZP/CN not only possesses excellent antibacterial activity upon visible light irradiation, but also facilitates the angiogenesis. In addition, ZP/CN also suppresses the inflammatory response. Therefore, this inorganic-organic material can serve as a promising platform for effective healing of bacteria-infected wounds.

Stage-specific and location-specific cartilage calcification in osteoarthritis development.

OBJECTIVES: This study investigated the stage-specific and location-specific deposition and characteristics of minerals in human osteoarthritis (OA) cartilages via multiple nano-analytical technologies. METHODS: Normal and OA cartilages were serially sectioned for micro-CT, scanning electron microscopy with energy dispersive X-ray spectroscopy, micro-Raman spectroscopy, focused ion beam scanning electron microscopy, high-resolution electron energy loss spectrometry with transmission electron microscopy, nanoindentation and atomic force microscopy to analyse the structural, compositional and mechanical properties of cartilage in OA progression. RESULTS: We found that OA progressed by both top-down calcification at the joint surface and bottom-up calcification at the osteochondral interface. The top-down calcification process started with spherical mineral particle formation in the joint surface during early-stage OA (OA-E), followed by fibre formation and densely packed material transformation deep into the cartilage during advanced-stage OA (OA-A). The bottom-up calcification in OA-E started when an excessive layer of calcified tissue formed above the original calcified cartilage, exhibiting a calcified sandwich structure. Over time, the original and upper layers of calcified cartilage fused, which thickened the calcified cartilage region and disrupted the cartilage structure. During OA-E, the calcified cartilage was hypermineralised, containing stiffer carbonated hydroxyapatite (HAp). During OA-A, it was hypomineralised and contained softer HAp. This discrepancy may be attributed to matrix vesicle nucleation during OA-E and carbonate cores during OA-A. CONCLUSIONS: This work refines our current understanding of the mechanism underlying OA progression and provides the foothold for potential therapeutic targeting strategies once the location-specific cartilage calcification features in OA are established.

Comparison of femoral mechanics before and after internal fixation removal and the effect of sclerosis on femoral stress: a finite element analysis.

BACKGROUND: Femoral neck fractures are a common traumatic injury. The removal of the internal fixation remains controversial, especially in terms of mechanical stability. Moreover, collapsed necrosis of the femoral head continues to occur after fracture healing. We believe that sclerotic cancellous bone (SCB) formation around the screw is associated with femoral head necrosis. We aimed to compare mechanical features before and after implant removal and determine the effect of SCB formation on stress distribution. METHODS: Cylindrical cancellous bone sections were collected from a relatively normal region and an SCB region of a necrotic femoral head, and their elastic moduli were measured. Four femoral finite element models were developed: a) femoral neck fracture healing with implants, b) fracture healing without implants, c) sclerosis around the screw with implants, and d) sclerosis around the screw without implants. RESULTS: The maximum von Mises peak stresses of models a and b were 66.643 MPa and 63.76 MPa, respectively, and were concentrated in the upper lateral femur. The main stress was scattered at the lowest screw tail, femoral calcar region, and lateral femur shaft. Moreover, coronal plane strain throughout the screw paths near the femoral head in models a and b was mostly in the range of 1000-3000 µÎµ. The maximum stress concentrations in models c and d were located at the lower femoral head and reached 91.199 MPa and 78.019 MPa, respectively. CONCLUSIONS: The stresses in the sclerotic model around the cannulated screws are more concentrated on the femoral head than in the healing model without sclerotic bone. The overall stresses in the healing femoral neck fracture model were essentially unchanged before and after removal of the internal fixation.

α2-macroglobulin-rich serum as a master inhibitor of inflammatory factors attenuates cartilage degeneration in a mini pig model of osteoarthritis induced by "idealized" anterior cruciate ligament reconstruction.

Post-traumatic osteoarthritis is a special type of osteoarthritis and a common disease, with few effective treatments available. α2-Macroglobulin (α2M) is important to chondral protection in post-traumatic osteoarthritis. However, its injection into xenogeneic joint cavities involves safety hazards, limiting clinical applications. Exploring serum α2M-enriching strategies and the therapeutic effect and mechanism of α2M-rich serum (α2MRS) autologous joint injection to treat post-traumatic osteoarthritis has significant value. In the present study, a unique filtration process was used to obtain α2MRS from human and mini pig serum. We evaluated the potential of α2MRS in protecting against post-surgery cartilage degeneration. We identify the potential of α2MRS in reducing the expression of inflammatory cytokines and factors that hasten cartilage degeneration in post-operative conditions leading to post-traumatic osteoarthritis. The potential of α2MRS was analyzed in interleukin-1ß induced human chondrocytes and mini pig models. In the chondrocyte model, α2MRS significantly promoted human chondrocyte proliferation and reduced apoptosis and chondrocyte catabolic cytokine gene transcription and secretion. The anterior cruciate ligament autograft reconstruction model of mini pigs was randomized into groups, operated on, and injected with α2MRS or saline. The results showed that α2MRS injection significantly suppressed the levels of inflammatory factors, improved gait, and showed significantly lower cartilage degeneration than the groups that did not receive α2MRS injections. This study highlights the chondroprotective effects of α2MRS, elucidated its potential applications against cartilage degeneration, and could provide a basis for the clinical translation of α2MRS.

Nanostructured Cu-doped TiO2 with photothermal effect for prevention of implant-associated infection.

Bacterial infection of titanium (Ti) dental implants is still a major clinical complication. In this study, a combination of copper (Cu) ions and photothermal therapy is used to combat implant-associated infection. Cu doped TiO2 (TiO2-Cu) films were prepared on Ti by magnetron sputtering and subsequently annealing. TiO2-Cu films had efficient photothermal conversion ability due to the generated nanostructure during the annealing process. Under the irradiation of 808 near infrared light, the combined actions of hyperthermia and Cu ions gave rise to excellent antibacterial activity against Streptococcus mutans on Ti as demonstrated by the experiments conducted in vitro and in vivo. The TiO2-Cu films also exhibited excellent biocompatibility. In addition, the surface hardness and corrosion resistance of TiO2-Cu films were greatly improved.

Micro-Computed Tomography Analysis of Femoral Head Necrosis After Long-Term Internal Fixation for Femoral Neck Fracture.

OBJECTIVE: To analyze necrotic femoral head after long-term internal fixation for femoral neck fractures using micro-computed tomography (CT) for bone histomorphometry. METHODS: The experimental group included six patients (two men and four women; mean age 62.00 ± 9.36 years) who underwent hip arthroplasty at 47.67 ± 14.22 months after internal fixation. Surgery was performed because of femoral head necrosis after femoral neck fracture between October 2018 and October 2020. The control group included three patients (two men and one woman; mean age 69.33 ± 4.62 years) who underwent hip arthroplasty for femoral neck fracture. In the experimental group, micro-CT quantitative analysis of the whole femur, sclerotic region around screws, screw paths, sclerotic region and screw paths, and relatively normal region was performed. The bone volume fraction (BV/TV), number of bone trabeculae (Tb.N), connection density (Conn.D), thickness of bone trabeculae (Tb.Th), separation of bone trabeculae (Tb.SP), structural model index (SMI), and bone mineral density (BMD) of each part were quantitatively analyzed. RESULTS: The BV/TV (0.3180 ± 0.0617), Conn.D (6.9261 ± 2.4715/mm3 ), Tb.Th (0.3262 ± 0.0136 µm), and BMD (298.9241 ± 54.2029 g/cm3 ) of the sclerotic region around the screws were significantly higher in the experimental group than the BV/TV (0.1248 ± 0.0390), Conn.D (2.5708 ± 0.5187/mm3 ), Tb.Th (0.1713 ± 0.0333 µm), and BMD (66.5181 ± 43.0380 g/cm3 ) in the control group (P < 0.05). The BV/TV (0.2222 ± 0.0684), Tb.Th (0.2775 ± 0.0326 µm), and BMD (195.0153 ± 71.8509 g/cm3 ) in the collapsed region were significantly higher in the experimental group than in the control group (P < 0.05). In the experimental group, the volume ratio of the sclerotic region around screws and screw paths to the entire femoral head was 0.4964 ± 0.0950. CONCLUSION: After internal fixation for femoral neck fracture, a large number of sclerotic plate-like trabeculae were observed around the long-term retained implant. The screw paths and surrounding sclerotic comprise approximately 50% of the femoral head volume.

Identification of an Ultrathin Osteochondral Interface Tissue with Specific Nanostructure at the Human Knee Joint.

Cartilage adheres to subchondral bone via a specific osteochondral interface tissue where forces are transferred from soft cartilage to hard bone without conferring fatigue damage over a lifetime of load cycles. However, the fine structure and mechanical properties of the osteochondral interface tissue remain unclear. Here, we identified an ultrathin ∼20-30 µm graded calcified region with two-layered micronano structures of osteochondral interface tissue in the human knee joint, which exhibited characteristic biomolecular compositions and complex nanocrystals assembly. Results from finite element simulations revealed that within this region, an exponential increase of modulus (3 orders of magnitude) was conducive to force transmission. Nanoscale heterogeneity in the hydroxyapatite, coupled with enrichment of elastic-responsive protein-titin, which is usually present in muscle, endowed the osteochondral tissue with excellent mechanical properties. Collectively, these results provide novel insights into the potential design for high-performance interface materials for osteochondral interface regeneration.

[Clinical effects of arthroscopy-assisted anterior cruciate ligament tibial eminence avulsion fracture compared with traditional open surgery:a Meta-analysis].

OBJECTIVE: To systematically evaluate the clinical efficacy of arthroscopy and traditional incision in the treatment of tibial avulsion fracture of anterior cruciate ligament (ACL). METHODS: From July 2010 to July 2020, clinical comparative trial about arthroscopy and traditional incision in the treatment of ACL tibial avulsion fracture was conducted by using computer-based databases, including Embase, Pubmed, Central, Cinahl, PQDT, CNKI, Weipu, Wanfang, Cochrane Library, CBM. Literature screening and data extraction were carried out according to the inclusion and exclusion criteria, and the quality of the included literature was evaluated by improved Jadad score and Ottawa Newcastle scale (NOS). The operation time, hospital stay, fracture healing time, knee range of motion, postoperative excellent and good rate, complication rate, Lysholm score, International Knee Documentation Committee (IKDC) score and Tegner score were statistically analyzed by Review Manager 5.3 software. RESULTS: Finally, 16 literatures were included, including 1 randomized controlled trial and 15 non randomized controlled trials, with a total of 822 patients (405 in arthroscopy group and 417 in traditional incision group). Meta analysis showed that the operation time [MD=-9.03, 95% CI(-14.36, -3.70), P<0.001], hospital stay [MD=-5.81, 95%CI(-9.32, -2.31), P=0.001] and fracture healing time [MD=-14.61, 95% CI(-17.93, -11.28), P<0.001] in the arthroscopy group were better than those in the traditional incision group. The incidence of complications in arthroscopy group was lower than that in traditional incision group[OR=0.15, 95%CI(0.07, 0.33), P<0.001]. The postoperative excellent and good rate[OR=4.39, 95%CI (1.96, 9.82), P<0.001], knee mobility[MD=6.78, 95%CI(2.79, 10.77), P<0.001], Lysholm score[MD=11.63, 95%CI(4.91, 18.36), P<0.001], IKDC score[MD=7.83, 95%CI(6.09, 9.57), P<0.001] and Tegner score[MD=0.60, 95%CI(0.31, 0.89), P<0.001] in the arthroscopic group were higher than those in the traditional incision group. CONCLUSION: Compared with the traditional open reduction and internal fixation, arthroscopic surgery in patients with ACL tibial avulsion fracture can shorten the operation time, hospital stay and fracture healing time, reduce the incidence of postoperative complications, and obtain good postoperative knee function. It can be recommended as one of the first choice for patients with ACL tibial avulsion fracture.

Combination of chondrocytes and chondrons improves extracellular matrix production to promote the repairs of defective knee cartilage in rabbits.

BACKGROUND: Chondrons are composed of chondrocytes and the surrounding pericellular matrix (PCM) and function to enhance chondrocyte-mediated cartilage tissue engineering. This study aimed at investigating the potential effect of combined chondrocytes with chondrons on the production of proteoglycan and collagen-II (Col-2) and the repair of defective knee cartilage in rabbits. METHODS: Chondrocytes and chondrons were isolated from the knee cartilage of rabbits, and cultured alone or co-cultured for varying periods in vitro. Their morphology was characterized by histology. The levels of aggrecan (AGG), Col-2 and glycosaminoglycan (GAG) expression were quantified by qRT-PCR, Alcian blue-based precipitation and ELISA. The effect of combined chondrocytes with chondrons in alginate spheres on the repair of defective knee cartilage was examined in rabbits. RESULTS: The isolated chondrocytes and chondrons displayed unique morphology and began to proliferate on day 3 and 6 post culture, respectively, accompanied by completely degenerated PCM on day 6 post culture. Evidently, chondrocytes had stronger proliferation capacity than chondrons. Longitudinal analyses indicated that culture of chondrons, but not chondrocytes, increased AGG mRNA transcripts and GAG levels with time and Col-2 mRNA transcripts only on day 3 post culture. Compared with chondrocytes or chondrons alone, co-culture of chondrocytes and chondrons significantly up-regulated AGG and Col-2 expression and GAG production, particularly at a ratio of 1:1. Implantation with chondrocytes and chondrons at 1:1 significantly promoted the repair of defective knee cartilage in rabbits, accompanied by reduced the Wakiteni scores with time. CONCLUSION: Combined chondrons with chondrocytes promoted the production of extracellular matrix and the repair of defective knee cartilage in rabbits. THE TRANSLATIONAL POTENTIAL OF THIS ARTICLE: This study explores that the combination of chondrons and chondrocytes may be new therapeutic strategy for cartilage tissue engineering and repair of defective cartilage.

Studies of Articular Cartilage Repair from 2009 to 2018: A Bibliometric Analysis of Articles.

OBJECTIVE: To perform a bibliometric analysis of research on articular cartilage repair published in Chinese and English over the past decade. Fundamental and clinical research topics of high interest were further comparatively analyzed. METHODS: Relevant studies published from 1 January 2009 to 31 December 2018 (10 years) were retrieved from the Wanfang database (Chinese articles) and six databases, including MEDLINE, WOS, INSPEC, SCIELO, KJD, and RSCI on the website "Web of Science" (English articles), using key words: "articular cartilage" AND "injury" AND "repair". The articles were categorized according to research focuses for a comparative analysis between those published in Chinese vs English, and further grouped according to publication date (before and after 2014). A comparative analysis was performed on research focus to characterize the variation in research trends between two 5-year time spans. Moreover, articles were classified as basic and clinical research studies. RESULTS: Overall, 5762 articles were retrieved, including 2748 in domestic Chinese journals and 3014 in international English journals. A total of 4937 articles focused on the top 10 research topics, with the top 3 being stem cells (32.1%), tissue-engineered scaffold (22.8%), and molecular mechanisms (16.4%). Differences between the numbers of Chinese and English papers were observed for 3 topics: chondrocyte implantation (104 vs 316), osteochondral allograft (27 vs 86), and microfracture (127 vs 293). The following topics gained more research interest in the second 5-year time span compared with the first: microfracture, osteochondral allograft, osteochondral autograft, stem cells, and tissue-engineered scaffold. Articles with a focus on three-dimensional-printing technology have shown the fastest increase in publication numbers. Among 5613 research articles, basic research studies accounted for the majority (4429), with clinical studies described in only 1184 articles. The top 7 research topics of clinical studies were: chondrocyte implantation (28.7%), stem cells (21.9%), microfracture (19.2%), tissue scaffold (10.6%), osteochondral autograft (10.5%), osteochondral allograft (6.3%), and periosteal transplantation (2.8%). CONCLUSION: Studies focused on stem cells and tissue-engineered scaffolds led the field of damaged articular cartilage repair. International researchers studied allograft-related implantation approaches more often than Chinese researchers. Traditional surgical techniques, such as microfracture and osteochondral transplantation, gained high research interest over the past decade.

[A short term clinical study of fibular osteotomy for knee osteoarthritis].

OBJECTIVE: To study clinical effects of fibular osteotomy for the treatment of knee osteoarthritis. METHODS: From January 2015, 12 patients (15 knees) with knee osteoarthritis were treated with fibular osteotomy. The main symptom was interval inside pain. All the patients were female with an average age of 61.3 years old. Early postoperative ambulation of joints was carried out after surgery, and the corresponding radiographic assessment before and after operations were performed with record. Finally, the following indicators were analyzed:VAS, KSS, HSS, respectively before, 2 days and 2 months after the operation. RESULTS: The average hospitalization time was (6.0±2.4) days, and the time of unilateral operation was (33.3±8.4) minutes without significant bleeding. There were no obvious complications such as wound infection, delayed healing and nerve damage. All the patients could walk around 1 day after operations with a chief complaint of the obvious reduction or disappear of the interval medial knee pain. The VAS score, HSS score and KSS clinical score were significantly improved 2 days after surgery compared to the scores before operation. These above scores and functional score were significantly improved 2 months after operation compared to the scores before operation. X ray films of the weight bearing knees were taken 2 days after surgery, showing increased height of medial joint space to some extent compared to that before operation. CONCLUSIONS: A fibular osteotomy has been proved to significantly reduce the postoperative pain and facilitate the good recovery of joint function with the advantages of simple surgical procedures and slighttrauma. Therefore, it is an effective method for the treatment of knee osteoarthritis with varus deformity.