ABSTRACT
BACKGROUND: This evidence-based practice guideline was developed to update and address new issues in the handling of cytotoxics, including the use of oral cytotoxics; the selection and use of personal protective equipment; and treatment in diverse settings, including the home setting. METHODS: The guideline was developed primarily from an adaptation and endorsement of an existing guideline and from three systematic reviews. Before publication, the guideline underwent a series of peer and external reviews to gather feedback. All comments were addressed, and the guideline was amended when required. The guideline applies to health care workers who could come into contact with cytotoxic drugs at any point in the medication circuit. The intended users are hospital administrators, educators, and managers; occupational health and safety services; and pharmacy and health care workers. RESULTS: The recommendations represent a reasonable and practical set of procedures that the intended users of this guideline should implement to minimize opportunities for accidental exposure. They are not limited to just the point of care; they cover the entire chain of cytotoxics handling from the time such agents enter the institution until they leave in the patient or as waste. CONCLUSIONS: Reducing the likelihood of accidental exposure to cytotoxic agents within the medication circuit is the main objective of this evidenced-based guideline. The recommendations differ slightly from earlier guidelines because of the availability of new evidence.
ABSTRACT
BACKGROUND AND PURPOSE: Poor device design that fails to adequately account for user needs, cognition, and behavior is often responsible for use errors resulting in adverse events. This poor device design is also often latent, and could be responsible for "No Fault Found" (NFF) reporting, in which medical devices sent for repair by clinical users are found to be operating as intended. Unresolved NFF reports may contribute to incident under reporting, clinical user frustration, and biomedical engineering technologist inefficacy. This study uses human factors engineering methods to investigate the relationship between NFF reporting frequency and device usability. MATERIAL AND METHODS: An analysis of medical equipment maintenance data was conducted to identify devices with a high NFF reporting frequency. Subsequently, semi-structured interviews and heuristic evaluations were performed in order to identify potential usability issues. Finally, usability testing was conducted in order to validate that latent usability related design faults result in a higher frequency of NFF reporting. RESULTS: The analysis of medical equipment maintenance data identified six devices with a high NFF reporting frequency. Semi-structured interviews, heuristic evaluations and usability testing revealed that usability issues caused a significant portion of the NFF reports. Other factors suspected to contribute to increased NFF reporting include accessory issues, intermittent faults and environmental issues. Usability testing conducted on three of the devices revealed 23 latent usability related design faults. CONCLUSIONS: These findings demonstrate that latent usability related design faults manifest themselves as an increase in NFF reporting and that devices containing usability related design faults can be identified through an analysis of medical equipment maintenance data.
Subject(s)
Databases, Factual , Equipment Design/statistics & numerical data , Equipment Failure Analysis/methods , Equipment Failure/statistics & numerical data , Equipment and Supplies/classification , Product Surveillance, Postmarketing/methods , Data Mining/methods , Equipment Failure Analysis/statistics & numerical data , Maintenance/methods , Maintenance/statistics & numerical data , Product Surveillance, Postmarketing/statistics & numerical dataABSTRACT
BACKGROUND: Computerized physician order entry (cpoe) systems allow for medical order management in a clinical setting. Use of a cpoe has been shown to significantly improve chemotherapy safety by reducing the number of prescribing errors. Usability of these systems has been identified as a critical factor in their successful adoption. However, there is a paucity of literature investigating the usability of cpoe for chemotherapy and describing the experiences of cancer care providers in implementing and using a cpoe system. METHODS: A mixed-methods study, including a national survey and a workshop, was conducted to determine the current status of cpoe adoption in Canadian oncology institutions, to identify and prioritize knowledge gaps in cpoe usability and adoption, and to establish a research agenda to bridge those gaps. Survey respondents were representatives of cancer care providers from each Canadian province. The workshop participants were oncology clinicians, human factors engineers, patient safety researchers, policymakers, and hospital administrators from across Canada, with participation from the United States. RESULTS: A variety of issues related to implementing and using a cpoe for chemotherapy were identified. The major issues concerned the need for better understanding of current practices of chemotherapy ordering, preparation, and administration; a lack of system selection and procurement guidance; a lack of implementation and maintenance guidance; poor cpoe usability and workflow support; and other cpoe system design issues. An additional three research themes for addressing the existing challenges and advancing successful adoption of cpoe for chemotherapy were identified: The need to investigate variances in workflows and practices in chemotherapy ordering and administrationThe need to develop best-practice cpoe procurement and implementation guidance specifically for chemotherapyThe need to measure the effects of cpoe implementation in medical oncology. CONCLUSIONS: Addressing the existing challenges in cpoe usability and adoption for chemotherapy, and accelerating successful migration to cpoe by cancer care providers requires future research focusing on workflow variations, chemotherapy-specific cpoe procurement needs, and implementation guidance needs.
ABSTRACT
BACKGROUND: Minimal research has been conducted into the potential patient safety issues related to administering multiple intravenous (IV) infusions to a single patient. Previous research has highlighted that there are a number of related safety risks. In Phase 1a of this study, an analysis of 2 national incident-reporting databases (Institute for Safe Medical Practices Canada and United States Food and Drug Administration MAUDE) found that a high percentage of incidents associated with the administration of multiple IV infusions resulted in patient harm. OBJECTIVES: The primary objectives of Phase 1b of this study were to identify safety issues with the potential to cause patient harm stemming from the administration of multiple IV infusions; and to identify how nurses are being educated on key principles required to safely administer multiple IV infusions. DATA SOURCES AND REVIEW METHODS: A field study was conducted at 12 hospital clinical units (sites) across Ontario, and telephone interviews were conducted with program coordinators or instructors from both the Ontario baccalaureate nursing degree programs and the Ontario postgraduate Critical Care Nursing Certificate programs. Data were analyzed using Rasmussen's 1997 Risk Management Framework and a Health Care Failure Modes and Effects Analysis. RESULTS: Twenty-two primary patient safety issues were identified with the potential to directly cause patient harm. Seventeen of these (critical issues) were categorized into 6 themes. A cause-consequence tree was established to outline all possible contributing factors for each critical issue. Clinical recommendations were identified for immediate distribution to, and implementation by, Ontario hospitals. Future investigation efforts were planned for Phase 2 of the study. LIMITATIONS: This exploratory field study identifies the potential for errors, but does not describe the direct observation of such errors, except in a few cases where errors were observed. Not all issues are known in advance, and the frequency of errors is too low to be observed in the time allotted and with the limited sample of observations. CONCLUSIONS: The administration of multiple IV infusions to a single patient is a complex task with many potential associated patient safety risks. Improvements to infusion and infusion-related technology, education standards, clinical best practice guidelines, hospital policies, and unit work practices are required to reduce the risk potential. This report makes several recommendations to Ontario hospitals so that they can develop an awareness of the issues highlighted in this report and minimize some of the risks. Further investigation of mitigating strategies is required and will be undertaken in Phase 2 of this research.
Subject(s)
Infusions, Intravenous/adverse effects , Patient Safety , Technology Assessment, Biomedical , Humans , Infusions, Intravenous/nursing , Ontario , Risk Assessment , Safety ManagementABSTRACT
OBJECTIVE: Assess the impact of infusion pump technologies (traditional pump vs smart pump vs smart pump with barcode) on nurses' ability to safely administer intravenous medications. DESIGN: Experimental study with a repeated measures design. SETTING: High-fidelity simulated inpatient unit. RESULTS: The nurses remedied 60% of "wrong drug" errors. This rate did not vary as a function of pump type. The nurses remedied "wrong patient" errors more often when using the barcode pump (88%) than when using the traditional pump (46%) or the smart pump (58%) (Cochran Q=14.36; p<0.05). The number of nurses who remedied "wrong dose hard limit" errors was higher when using the smart pump (75%) and the barcode pump (79%) than when using the traditional pump (38%) (Cochran Q=12.13; p<0.003). Conversely, there was no difference in remediation of "wrong dose soft limit" errors across pump types. The nurses' pump programming was less accurate when mathematical conversions were required. Success rates on secondary infusions were low (55.6%) and did not vary as a function of pump type. CONCLUSIONS: These findings indicate that soft (changeable) limits in smart infusion pumps had no significant effect in preventing dosing errors. Provided that smart pumps are programmed with hard (unchangeable) limits, they can prevent dosing errors, thereby increasing patient safety. Until barcode pumps are integrated with other systems within the medication administration process, their role in enhancing patient safety will be limited. Further improvements to pump technologies are needed to mitigate risks associated with intravenous infusions, particularly secondary infusions.
Subject(s)
Drug Therapy/nursing , Infusion Pumps , Inpatients , Nursing Care/standards , Adolescent , Adult , Female , Humans , Male , Medication Errors/prevention & control , Middle Aged , Task Performance and Analysis , Young AdultABSTRACT
Thermal conduction and convection were examined as sources of error in thermographically measured SAR patterns of an interstitial microwave hyperthermia applicator. Measurements were performed in a layered block of muscle-equivalent phantom material using an infrared thermographic technique with varying heating duration. There was a 52.7% reduction in maximum SAR and 75.5% increase in 50% iso-SAR contour area for a 60-s heating duration relative to a 10-s heating duration. A finite element model of heat transfer in an homogeneous medium was used to model conductive and convective heat transfer during the thermographic measurement. Thermal conduction artefacts were found to significantly distort thermographically measured SAR patterns. Convective cooling, which occurs when phantom layers are exposed for thermal image acquisition, was found to significantly affect the magnitude, but not the spatial distribution, of thermographically measured SAR patterns. Results from this investigation suggest that the thermal diffusion artefacts can be minimized if the duration of the applied power pulse is restricted to 10 s or less.
Subject(s)
Hyperthermia, Induced/statistics & numerical data , Hot Temperature , Humans , Models, Biological , Neoplasms/therapy , Phantoms, Imaging , Thermography/statistics & numerical dataABSTRACT
Changes in magnetic resonance (MR) signals during interstitial microwave heating are reported, and correlated with simultaneously acquired temperature readings from three fiber-optic probes implanted in a polyacrylamide gel phantom. The heating by a MR-compatible microwave antenna did not interfere with simultaneous MR image data acquisition. MR phase-difference images were obtained using a fast two-dimensional-gradient echo sequence. From these images the temperature-sensitive resonant frequency of the 1H nuclei was found to decrease approximately by 0.008 ppm/ degree C. The method and results presented here demonstrate that noninvasive MR-temperature imaging can be performed simultaneously with interstitial microwave thermal treatment.
Subject(s)
Hyperthermia, Induced , Magnetic Resonance Imaging/instrumentation , Microwaves , Temperature , Biophysical Phenomena , Biophysics , Fiber Optic Technology , Microwaves/therapeutic use , Optical Fibers , Phantoms, ImagingABSTRACT
The infusion of contrast solution into multiple patients from a single infusion bag is desired in clinics concerned with the high cost of the solution. Using one-way check valves in the infusion line is a protection method to reduce the risk of blood-borne cross-contamination. The suitability of this method is assessed through testing of the operating characteristics of the valves and infusion system and the high back pressure testing of the valves. The results indicate that the use of back-flow valves can ensure the prevention of flow from the patient to the injector. Results also indicate that the use of sprung valves, those which require a significant forward pressure to open them, are more appropriate for this application.
Subject(s)
Contrast Media/administration & dosage , Cross Infection/prevention & control , Infusions, Intravenous/instrumentation , Quality Assurance, Health Care , Radiology Department, Hospital/standards , Blood-Borne Pathogens , Contrast Media/economics , Cross Infection/epidemiology , Cross Infection/transmission , Equipment Design/standards , Hospital Costs , Humans , Infusions, Intravenous/standards , Ontario/epidemiology , Radiology Department, Hospital/economicsABSTRACT
Early discussion regarding smoke produced by both surgical lasers and electrosurgical machines concluded that the smoke produced by these instruments was little more than a malodorous nuisance. Animal and human studies to date, however, have suggested that this smoke is, indeed, dangerous. This smoke has been shown to be mutagenic and can contain bacteria and viruses, the HIV virus being the most notable. Furthermore, these particles are small enough to penetrate deep within the respiratory tract. In response to the concerns raised by these hazards, commercial smoke evacuation systems have been designed to greatly reduce the number of hazardous particles, as well as the noxious odor produced by electrosurgery and laser surgery. The efficacy of these systems, however, is dependent o n usage and placement close to the surgical site. This review paper presents the potential hazards of electrosurgical smoke, along with some guidelines on how to properly protect hospital staff and patients from these hazards.
Subject(s)
Air Pollutants, Occupational/toxicity , Electrosurgery/adverse effects , Occupational Exposure , Personnel, Hospital , Smoke/adverse effects , Bacteria , Canada , Humans , Mutagens/toxicity , VirusesABSTRACT
The microneurographic technique of directly recording muscle sympathetic nerve activity (SNA) in conscious humans was developed over 20 yr ago, but analysis and quantification of the resultant mean voltage neurogram has been largely by visual inspection by a trained observer. Two computer-assisted methods were developed to quantitate these bursts of efferent activity: peak detection, and ECG R-wave-triggered burst averaging. Peak detection was optimized using statistical techniques; burst averaging was compared to both the manual technique and to the peak detection method. Burst averaging was found to be the superior method because of its speed, consistency, and objectivity.