Quantifying bone healing after mandibular displacement in orthognathic surgery.

Impaired bony healing following bilateral sagittal split osteotomy (BSSO) is a major unmet medical need for affected patients, and rare occurrences can hinder the identification of underlying risk factors. We hypothesised that osseous union following BSSO can be quantified using volumetric analysis, and we aimed to identify the risk factors for impaired bone healing. The percentage change in bony volume was measured in orthognathic patients following BSSO using two consecutive postoperative cone-beam computed tomography scans. Patients' characteristics and treatment parameters were documented, and correlation and regression analyses of these variables performed. Thirty-six patients (23 men and 13 women) with a mean (SD) age of 33.28 (11.86) years were included. The gap site (lingual versus buccal) (p < 0.01) had a significant impact on the change in volume. Age (p = 0.06) showed a trend towards significance. Initial width of the osteotomy gap, sex, and indication for surgery did not influence osseous healing. Increased age at surgery and the side of the buccal osteotomy are independent risk factors for impaired osseous healing following BSSO.

Maxillomandibular advancement is a safe procedure in patients with obstructive sleep apnoea. Results of a retrospective study.

Obstructive sleep apnoea (OSA) is a syndrome with a high burden on public health. Maxillomandibular advancement (MMA) has proven to be a highly effective treatment option. This retrospective analysis evaluated the safety of maxillomandibular advancement with rotation in patients with OSA. A total of 63 patients with OSA were included in this study. Surgical treatment by maxillomandibular advancement was virtually planned based on preoperative cone beam computed tomography (CBCT). A 3D printed guide and a customised implant were used for surgical transfer. The safety of MMA was evaluated based on the necessity of postoperative intermediate care unit (IMCU) stay, duration of stay in hospital, and recording of medical complications. A total of 63.5% of the OSA patients treated by MMA (n = 40/63) were postoperatively transferred from the recovery room directly to the regular ward, while 36.5% of the patients (n = 23/63) stayed on IMCU for at least one night. On average, the length of hospitalisation was four days after surgery. One patient from the ward group and one patient from the IMCU group developed a major complication according to Clavian-Dindo classification grade IV. MMA is a safe surgical procedure. The necessity for postoperative monitoring in an IMCU setting should be based on an individual risk evaluation. However, since major complications can occur, MMA should be performed as an inpatient procedure in a hospital with available intensive medicine care. This study underlines the safety of MMA in OSA patients.

Comprehensive virtual orthognathic planning concept in surgery-first patients.

The surgery-first concept is becoming increasingly popular in orthognathic surgery since it offers major advantages such as a reduction of treatment duration and an increase in patient satisfaction by eliminating phases of presurgical orthodontic decompensation. Here, we present a novel interdisciplinary pathway of a fully virtual orthodontic-surgical planning concept in a surgery-first setting using a 3D-printed cutting guide and a customised maxillary implant for the Le Fort I osteotomy as well as a CAD/CAM-based stereolithographic final splint. Patient data from cone-beam computed tomography of the skull and a full arch dental scan were processed using the OnyxCeph3TM software (Image Instruments). A mutual computer-aided surgical simulation was conducted by the orthodontist and the oral and maxillofacial surgeon to determine the three-dimensional maxillary and mandibular movements. In a separate virtual planning session, the surgeon designed a customised maxillary guide and implant for precise intraoperative transfer (Geomagic Freeform Plus software, 3DSystems). A 3D-printed CAD/CAM-based final splint was fabricated by the orthodontist and used for accurate mandibular repositioning. We established a comprehensive virtual interdisciplinary orthognathic workflow and successfully applied this concept with a high level of accuracy in a series of surgery-first patients with different types of dentofacial anomalies. This novel fully computer-based pathway offers a high potential to improve the outcomes of orthognathic surgery and reduce total treatment time in the management of the orthognathic patient.

Patient-Specific 3D-Printed Miniplates for Free Flap Fixation at the Mandible: A Feasibility Study.

Background: This study was conducted to evaluate the feasibility, clinical outcomes, and accuracy of patient-specific 3D-printed miniplates for mandible reconstruction with fibula free flaps. Methods: A feasibility study was conducted with 8 patients. Following virtual planning, patient-specific 1.0 mm titanium non-locking miniplates were produced via laser selective melting. 3D-printed cutting and drilling guides were used for segmental mandible resection and flap harvesting. Flap fixation was performed with two 4-hole miniplates and 2.0 mm non-locking screws (screw length 7 mm) for each intersegmental gap. Clinical follow-up was at least 6 months. Preoperative and postoperative CT/cone beam CT data were used for 3D accuracy analysis and evaluation of bone healing. Plate-related complications were monitored clinically. Results: Patient-specific miniplate fixation of all flaps was successfully conducted (4 mono-segmental, 4 dual-segmental) with high accuracy (3.64 ± 1.18 mm) between the virtual plan and postoperative result. No technical complications were encountered intraoperatively. Osseous union occurred in all intersegmental gaps (1 partial, 18 complete) after 10 ± 2 months. No material fracture, dislocation, or plate exposure was observed. Conclusions: Based on this pilot observational study including a limited number of patients, free flap fixation for mandibular reconstruction with patient-specific 3D-printed miniplates is feasible and associated with high accuracy, bone healing, and remote soft tissue complications.

Imaging foreign bodies in head and neck trauma: a pictorial review.

Open injuries bear the risk of foreign body contamination. Commonly encountered materials include gravel debris, glass fragments, wooden splinters or metal particles. While foreign body incorporation is obvious in some injury patterns, other injuries may not display hints of being contaminated with foreign body materials. Foreign objects that have not been detected and removed bear the risk of leading to severe wound infections and chronic wound healing disorders. Besides these severe health issues, medicolegal consequences should be considered. While an accurate clinical examination is the first step for the detection of foreign body materials, choosing the appropriate radiological imaging is decisive for the detection or non-detection of the foreign material. Especially in cases of impaired wound healing over time, the existence of an undetected foreign object needs to be considered.Here, we would like to give a practical radiological guide for the assessment of foreign objects in head and neck injuries by a special selection of patients with different injury patterns and various foreign body materials with regard to the present literature.

One stage microvascular mandible reconstruction by using scapula chimeric flap combined with computer-aided-design and computer-aided-manufacturing plate including bilateral alloplastic TMJ prosthesis: A case report.

This report focuses a defect comprising the complete mandible due to osteonecrosis, including both condyles, that required bilateral temporomandibular joint (TMJ) reconstruction with complete mandibular corpus using a computer-aided-design and computer-aided-manufacturing(CAD-CAM) planning to harvest a scapula chimeric free flap combined with plate including bilateral alloplastic TMJ prosthesis. This procedure was realized in one and the same surgery. A 73 year-old-man developed an osteoradionecrosis of the total mandible including both condyles after radiation therapy for a squamous cell carcinoma of the tongue base(cT4aN2bM0G3). A CAD-CAM reconstruction was planned with a plate extended by bilateral individual TMJ prosthesis, individual fossa components and combined with a composite free flap originating from the subscapular vessel system including scapula(circumflex subscapular artery) for reconstruction of the mandibular corpus which was osteotomized in three segments with a resection guide, the parascapular skin paddle (descending branch of circumflex subscapular artery) for compensation of the soft tissue deficiency of the cervical skin and latissimus dorsi muscle(thoracodorsal artery) for the inner mucosal lining and intraoral reconstruction. The subscapular artery was anastomosed to the external carotid artery and two concomitant veins were sutured end-to-side to the internal jugular vein. The patient was discharged without feeding tube and tracheostomy. No complications have been observed after 6 months follow-up. The patient was able to tolerate soft diet and had comprehensible speech. Thus, a total mandibular reconstruction including both condyles using alloplastic and autoplastic reconstruction in one and the same stage is a valid option and may be considered in comparably severe cases.

Saliva diagnostics in patients suffering from bisphosphonate-associated osteonecrosis of the jaw: Results of an observational study.

OBJECTIVE: One of the severe side effects of bisphosphonate (BP) therapy is bisphosphonate-associated osteonecrosis of the jaw (BONJ). However, there is no information available about its pathogenesis. Hence, the aim of this observational study was to contribute to discerning this pathogenesis by comparing salivary quantity and quality in patients with BONJ and undergoing BP treatment. MATERIALS AND METHODS: This study included 60 patients divided into three groups. The first group consisted of 20 patients with established BONJ, the second group had 20 patients undergoing BP treatment, and the third group comprised 20 healthy individuals. These groups were analysed for the flow rate of stimulated saliva, buffer capacity, and salivary pH level. RESULTS: Reduced salivation was observed in a significantly high number of patients with established BONJ (n = 8) and those undergoing BP treatment (n = 9) in comparison with the healthy control group (n = 4; p = 0.039). Though the distribution of the mean value of stimulated saliva flow rates in patients undergoing BP treatment was lower than in the control group, the difference was not significant. Moreover, there were no significant differences in the salivary pH level and buffer capacity in patients undergoing BP treatment as compared with the healthy control group. CONCLUSIONS: It is possible that the quantity of human saliva is affected by BP treatment. This reduction in saliva production could have a negative effect on mucosal health and is perhaps a cofactor in the pathogenesis of BONJ.

Impact of Dental Implant Surface Modifications on Osseointegration.

Objective. The aim of this paper is to review different surface modifications of dental implants and their effect on osseointegration. Common marketed as well as experimental surface modifications are discussed. Discussion. The major challenge for contemporary dental implantologists is to provide oral rehabilitation to patients with healthy bone conditions asking for rapid loading protocols or to patients with quantitatively or qualitatively compromised bone. These charging conditions require advances in implant surface design. The elucidation of bone healing physiology has driven investigators to engineer implant surfaces that closely mimic natural bone characteristics. This paper provides a comprehensive overview of surface modifications that beneficially alter the topography, hydrophilicity, and outer coating of dental implants in order to enhance osseointegration in healthy as well as in compromised bone. In the first part, this paper discusses dental implants that have been successfully used for a number of years focusing on sandblasting, acid-etching, and hydrophilic surface textures. Hereafter, new techniques like Discrete Crystalline Deposition, laser ablation, and surface coatings with proteins, drugs, or growth factors are presented. Conclusion. Major advancements have been made in developing novel surfaces of dental implants. These innovations set the stage for rehabilitating patients with high success and predictable survival rates even in challenging conditions.

Osteonecrosis of the jaw in a Crohn's disease patient following a course of Bisphosphonate and Adalimumab therapy: a case report.

BACKGROUND: Bisphosphonates have a widespread indication for osteoporosis and are also applied in cancer patients with skeletal-related conditions. Bisphosphonate-associated osteonecrosis of the jaw (BRONJ) is a feared side effect which is hard to treat and often affects patient's quality of life in an extensive manner. Adalimumab (Humira®), a fully human recombinant antibody specific for tumor necrosis factor- α, is approved for treatment in patients with Inflammatory Bowel Disease like ulcerative colitis or Crohn's disease. CASE PRESENTATION: In March 2013, a 36-year-old female presented with right-sided perimandibular swelling, recurrent facial pain and exposed necrotic bone after previous extraction of tooth 47. She had the medical history of Crohn's disease for more than one decade with chronic active enterocolitis, fistula disease as well as previous oral manifestation and was currently treated with Adalimumab since September 2008. Due to steroid-induced osteoporosis, diagnosed in 2004, she received oral Bisphosphonates (Risedronate) from 2004 until 2007 followed by two infusions of Zoledronic acid in 2008 and 2009. CONCLUSION: This patient with a medical history of Crohn's disease and gastrointestinal remission under Adalimumab therapy presented with osteonecrosis of the jaw after suspended oral and intravenous Bisphosphonate therapy implicating that the biologic therapy with an anti-TNF-α antibody might promote the manifestation of osteonecrosis and compromise oral healing capacity.

The outcome after surgical therapy of bisphosphonate-associated osteonecrosis of the jaw--results of a clinical case series with an average follow-up of 20 months.

OBJECTIVES: The present case series evaluates the success rate of osteotomy and primary wound closure in patients with bisphosphonate-associated osteonecrosis of the jaw (BRONJ). MATERIALS AND METHODS: Eighty patients suffering from BRONJ were included in the study. All patients received intravenous bisphosphonate therapy and underwent osteotomy and primary wound closure according to a standardised protocol. After discharge, the patients were reviewed on a regular basis over an average time period of 20 months. RESULTS: During follow-up in 11 patients, a recurrence of BRONJ occurred in the former operation field. Seventeen patients died due to their underlying disease. The success rate of osteotomy and primary wound closure in the treatment of BRONJ was calculated at 84.2 % 20 months after surgery. The results showed non-significant difference concerning the outcome of surgery in the different clinical stages of BRONJ. CONCLUSIONS: In accordance with previous studies, stage-independent osteotomy and primary wound closure combined with antibiotics shall be deemed a viable treatment option in patients suffering from BRONJ. CLINICAL RELEVANCE: With a high success rate, osteotomy in combination with primary wound closure seems to be a viable alternative to more conservative protocols in the treatment of BRONJ.

The role of the vagus nerve: modulation of the inflammatory reaction in murine polymicrobial sepsis.

The particular importance of the vagus nerve for the pathophysiology of peritonitis becomes more and more apparent. In this work we provide evidence for the vagal modulation of inflammation in the murine model of colon ascendens stent peritonitis (CASP). Vagotomy significantly increases mortality in polymicrobial sepsis. This effect is not accounted for by the dilatation of gastric volume following vagotomy. As the stimulation of cholinergic receptors by nicotine has no therapeutic effect, the lack of nicotine is also not the reason for the reduced survival rate. In fact, increased septic mortality is a consequence of the absent modulating influence of the vagus nerve on the immune system: we detected significantly elevated serum corticosterone levels in vagotomised mice 24 h following CASP and a decreased ex vivo TNF-alpha secretion of Kupffer cells upon stimulation with LPS. In conclusion, the vagus nerve has a modulating influence in polymicrobial sepsis by attenuating the immune dysregulation.

Implantation of alloplastic material increases survival of mice subsequently exposed to polymicrobial sepsis.

PURPOSE: Major surgery can modulate the immune system and by this the clinical course of following complications. Effects of minor surgical treatments on the immune system and septic complications are poorly understood. MATERIALS AND METHODS: We investigated the effect of a minor surgical procedure--the implantation of an osmotic pump--on the outcome of experimental polymicrobial sepsis (colon ascendens stent-induced peritonitis, CASP) in mice. RESULTS: Animals with pumps implanted 3 days prior to CASP showed an attenuated clinical course of sepsis and increased survival. While measured serum cytokine levels were not affected by the minor surgical stress of pump implantation, splenocyte secretion of IFN-gamma in response to lipopolysaccharide was increased. CONCLUSION: The early implantation of alloplastic material modulates the immune system and leads to an increased survival of a polymicrobial sepsis. Identifying the molecular nature of this effect might point the way to a new therapeutic approach to reduce sepsis mortality.