Functionalization of decavanadate anion by coordination to cobalt(II): Binding to proteins, cytotoxicity, and water oxidation catalysis.

A series of five decavanadates (V10) using a simple, one-pot synthesis, adhering to the model template: transition metal ion - decavanadate - ligands:(Hnicotinamide)2{[Co(H2O)3(nicotinamide)2]2[µ-V10O28]}.6H2O (1), {[Co(H2O)4(isonicotinamide)2]3}V10O28·4H2O (2), {[Co(H2O)4]2[Co(H2O)2(µ-pyrazinamide)2][µ-V10O28]}·4H2O (3) {[Co(H2O)4(µ-pyrazinamide)]3.V10O28}·4H2O (4), and (NH4)2{[Ni(H2O)4(2-hydroxyethylpyridine)]2}V10O28·2H2O (5) was synthesized. X-ray analysis reveals that 1 and 3 are decavanadato complexes, while 2, 4 and 5 are decavanadate complex salts. Moreover, 3 is the first example of a polymeric decavanadato complex, employing direct coordination with the metal center and the organic ligand, in toto. From the solution studies using 51V NMR spectroscopy, it was decoded that 1 and 3 stay stable in the model buffer solution and aqueous media. Binding to model proteins, cytotoxicity and water oxidation catalysis (WOC) was studied primarily for 1 and 3 and concluded that neither 1 nor 3 have an interaction with the model proteins thaumatin, lysozyme and proteinase K, because of the presence of the organic ligands in the Co(II) center, any further interplay with the proteins was blocked. Cytotoxicity studies reveal that 1 is 40% less toxic (0.05 mM) and 26% less toxic (0.1 mM) than the uncoordinated V10 with human cell lines A549 and HeLa respectively. In WOC, 1 performed superior activity, by evolving 143.37 nmol of O2 which is 700% (9-fold) increase than the uncoordinated V10.

Metalloporphyrin Metal-Organic Frameworks: Eminent Synthetic Strategies and Recent Practical Exploitations.

The emergence of metal-organic frameworks (MOFs) in recent years has stimulated the interest of scientists working in this area as one of the most applicable archetypes of three-dimensional structures that can be used as promising materials in several applications including but not limited to (photo-)catalysis, sensing, separation, adsorption, biological and electrochemical efficiencies and so on. Not only do MOFs have their own specific versatile structures, tunable cavities, and remarkably high surface areas, but they also present many alternative procedures to overcome emerging obstacles. Since the discovery of such highly effective materials, they have been employed for multiple uses; additionally, the efforts towards the synthesis of MOFs with specific properties based on planned (template) synthesis have led to the construction of several promising types of MOFs possessing large biological or bioinspired ligands. Specifically, metalloporphyrin-based MOFs have been created where the porphyrin moieties are either incorporated as struts within the framework to form porphyrinic MOFs or encapsulated inside the cavities to construct porphyrin@MOFs which can combine the peerless properties of porphyrins and porous MOFs simultaneously. In this context, the main aim of this review was to highlight their structure, characteristics, and some of their prominent present-day applications.

Crystal structure of bis-(ammonium) bis-[penta-aqua-(di-methyl-formamide)-zinc(II)] deca-vanadate tetra-hydrate.

The crystalline product (NH4)2[Zn(C3H7NO)(H2O)5]2[V10O28]·4H2O was success-fully isolated from an H2O/DMF solvent combination by evaporation at ambient temperature. The salt crystallizes in the P21/n space group. Imidazole, initially used in the synthesis but not present in the product, and DMF solvent appear to affect the synthesis and crystallization as structural-directing agents. In the title compound, the complex cation [Zn(H2O)5(DMF)]2+ acts as a counter-ion without being directly coordinated to the deca-vanadate anion. An extensive framework of hydrogen bonds integrates the whole architecture as evidenced by X-ray crystallography. The polyoxometalate [V10O28]6- lies on a center of symmetry while the complex cation [Zn(H2O)5(DMF)]2+ links three adjacent anions through a set of 2 + 2 + 3 hydrogen bonds.

Electrophoretic deposition of polyaniline nanofibers on a stainless steel wire as an adsorbent for determination of tamoxifen by SPME/GC-FID in urine samples.

Polyaniline nanofiber films were fabricated on the surface of stainless steel wire via a controllable and simple electrophoretic deposition route from a nonaqueous colloidal suspension consisting of polyaniline nanofibers. The prepared coating material was then characterized by field emission scanning electron microscopy equipped with energy dispersive spectroscopy and elemental mapping analysis. The fabricated polyaniline film-coated stainless steel wire was then utilized as an effective and novel sorbent phase for solid-phase microextraction of tamoxifen for subsequent gas chromatography/flame ionization detection of this anticancer drug. Parameters consisting of the temperature, extraction time, salt concentration, agitation speed, pH, temperature and time of desorption were studied and optimized using a one-at-a-time strategy. Under the optimum conditions, detection limit (S/N = 3), the limit of quantification (10/3 limit of detection), linear dynamic range, repeatability and reproducibility values of 0.51 µg L-1 , 1.7 µg L-1 , 2-1,130 µg L-1 , 5.7% and 8.6% were attained, respectively. The prepared fiber can preserve 90% of its efficacy after 20 consecutive cycles, demonstrating the suitable thermal stability and cyclability of the proposed solid-phase microextraction coating material for the determination of tamoxifen by gas chromatography/flame ionization detection. The route was effectively utilized to determine tamoxifen in urine samples, with relative recoveries ranging from 89 to 106%.

Effects of Diode Low-Level Laser Therapy of 810 Nm on Pulpal Anesthesia of Maxillary Premolars: A Double-Blind Randomized Clinical Trial.

OBJECTIVE: The purpose of this study was to investigate the pulpal effect of diode low-level laser therapy (LLLT) of 810 nm on the alleviation of pain in patients requiring dental procedures. METHODS: The current study was a double-blind randomized clinical trial carried out on twenty participants. The electric pulp testing (EPT) was recorded at baseline. Patients were randomly divided into sham laser and laser group respectively receiving low-level laser with placebo and active probes. Low-level laser at 810 nm, 200 MW constant power, 30s irradiation time and energy dose of 6 J was used. The electric pulp testing (EPT) method was again adopted to assess the rate of induced anesthesia. Laser and sham laser treatments were carried out in two different sessions with a one-week interval to ensure avoiding the potential false placebo results. Data were analyzed in SSPS-24 using Chi-square test and t-test. The p-value was set at 0.05. RESULTS: A low-level laser at 810 nm significantly alleviate EPT-induced pain compared to the pain before laser irradiation (P≤0.001). While the difference of EPT-induced pain before and after sham laser irradiation was not significant in control group (P>0.05). There was no correlation between the anesthetic effects of a laser application at 810 nm and other variables including age and gender (P>0.05). CONCLUSION: An 810 nm low-level laser is a powerful device for induced anesthesia applications in patients requiring dental procedures. It also lessens the patients' fear of dental procedures.

Chromium speciation by surfactant assisted solid-phase extraction and flame atomic absorption spectrometric detection.

A new procedure has been developed for chromium speciation in aqueous solution by the use of micellar, ion-association, solid-phase extraction techniques (SPE) followed by flame atomic absorption spectrometry. The method was based on the use of C-18 bonded phase silica SPE disks for retention of ion-associated Cr(VI) with cetyl trimethyl ammonium bromide (CTAB), elution of the retained species and subsequent detection by flame atomic absorption spectrometry (FAAS). Cr(III) was oxidized by potassium persulfate to Cr(VI), then the total chromium was retained on the disk and determined by FAAS. The amount of Cr(III) was calculated by the difference between the total and Cr(VI) values. The calculated limit of detections (LOD) (based on 3sigma) are 15 microg L(-1) and 20 microg L(-1) for Cr(VI) and Cr(III) respectively. No considerable interferences have been observed from other investigated anions and cations and the method has been successfully applied to water samples taken from the Karoon River in Khuzestan province.